Everything Blank in NRSA6 of QA environment.

Hi All,
       We need to load all the data from R/3 QA dev to BW Dev, and we all the data sources in NRSA5 but in NRSA6 , there is nothing , everything is blank. Now If I'm trying to see all that I have in nrsa5(of QA) in Nrsa6 , what should I be doing??
Thanks in advance.

Hi Smily,
RSA5 = Datasources delivered
RSA6 = Datasources active in your system.
If you see everything in RSA5 but nothing in RSA6, it means that they have not been activated. If this is the QA system, then we generally transport the datasources from Dev, rather than activating in QA.
Hope this helps...

Similar Messages

  • Environment of hyperion

    as i am new to hyperion.. can u explain what will be the environment of hyperion in a big company.. starting from servers .. and tools everything...hy

    If you have created a planning application not using the default admin account then the native account will be different between instances of shared services. I recommend using the default admin account to create applications, makes migrations much easier.
    If this is the case when you migrate the planning application the security will not work, you would need to update the native sid account. Though make sure it is the same application owner between source and target to make it easier.
    To do this create a blank application in your target environment, run a sql query against the planning application, Select SID from HSP_USERS where user_id = 50001
    Store that SID value.
    Migrate your planning app, then go and update the SID value with the one you stored.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Getting Records for Blank Date Field

    Hi All,
    I am trying to get all the records with blank Calday values, but not able to get the data in listcube or Query? how can I get this without using boolean function, range or manipulating data, in query i tried to restrict using # but no luck.
    Thanks,
    S.B.

    In the listcube, click on calday and when a selection comes on
    in the box of calday right click and option -> equal and leave
    blank the field. That will display everything blank
    Thanks
    Wons

  • Display screen is turned off after timeout even when blanking disabled

    After a recent update which among other things upgraded gnome to 3.10 my display blanking policy no longer behaves according to a configuration.
    Currently it is being turned off (monitor says "no DVI signal" and switches off) after each 10 mins if idle time.
    In Gnome's Power Settings I have 'Blank Screen' set to Never.
    It used to work perfectly earlier, no blanking, but now it blanks not only when I'm idle, but even when watching some movie in VLC.
    I am not sure if this has to do with Gnome update or some other system component is causing this.
    Using nvidia driver.
    Any hint or link to the topic with the workaround would be greatly appreciated.
    I tried google and local forum search and found nothing on the topic
    Last edited by dimsuz (2013-10-10 09:49:36)

    I just noticed myself this annoying issue and I do not use Gnome nor GDM.
    The thing is after checking the xset settings with
    xset q
    I noticed that the DPMS settings for Standby, Suspend and Off were back to their default values (60/60/600) instead of the 0/0/0 as I am using
    xset s off &
    in my openbox autostart file to avoid the screen blanking.
    The way I fixed it was to simply run
    xset -dpms
    being the DPMS featured as disabled when queried.
    Afterwards I checked that the screen did not blank again and 1) logged out and 2) restarted checking both times that the DPMS were the ones expected (0/0/0).
    Thus, so far, I have no issues with the screen blanking in a non Gnome environment (Openbox) anymore.
    Last edited by root (2013-10-18 22:46:26)

  • Weird recent behavior in Flex display

    Greetings:
       I have a Flex- based application that I have built using Flex Builder 3. Flex Builder 3 has a number of things that I would like to later discuss, but for now I am experiencing a critical problem:
       I began working on this application (which is actiually a suite of  4 Web 2.0 applications) almost 6 months ago, and I used Flex Builder to create the HTML templates that I use for deploying the applications. For several months I have been deploying the application on Tomcat without problems. I am able to write my .mxml files in Flex Builder, and for testing purposes I ran Tomcat locally from within Flex Builder to make sure that my apps talked to it properly (I am using E4X to pass XML between my servlets and my Flex application(s). For various reasons, using Adobe's BlazeDS is not an option.
       In any event, I have been bouncing between 3 environments: the "regular" Flex development environment where I put together the RIA portions of my applications, a local testing environment that runs within Flex Builder but allows me to test everything within Tomcat, and a deployment environment where I have a pla,ce to actually deploy my application(s).
       Everything was going well until this morning. This morning, I was finally comnpleting the finishing touches on the last app in the suite when suddenly all those pages where I had Flex applications running started to go blank! The applications run well within the development environment, but now when I do a deploy I get a blank page. It is looking as if for some reason the Flash Player is not loading and executing the .swf file.
       This problem happens consistantly in Internet Explorer and Mozilla Firefox. I am using IE 8 and Firefox 3.5.3.
       At first I thought there was something going on with the generated HTML that Flex Builder created. But I hadn't changed those files in months!
    I had been editing my ,mxml and ActionScript files recently, and I suspect that I had done something to cause the Javascript to fail to work with the .swf files. For the life of me, I cannot think what that something could have been.
       Has anyone seen this problem before? Does anyone have any insights as to what would cause this proiblem?
       someone please advise. Any help on this matter would be greatly appreciated.

    Greetings, all:
       Thanks for the replies, and apologies for not getting back to people sooner. I have been busy deployiong other (flex) apps and setting up an environmernt for working on this problem.
       In any event: I have set up a local test environment that enables me to create a deployment and run it on a local Tomcat server. I also found an older version of the application that actually worked without problems before.
       I am currently running tests, using Firebug (as suggested) to look at what is happening. I have also swapped in and out enough of the .SWF files and the .HTML files to determine that whatever is causing the blank pages has something to do with my .SWF file. It turns out that my HTML files are not effecting anything (they were generated by Builder anyway, so I am not surprised to see that older versions of the HTML file which worked well with old SWF files show blank pages when used with new .SWF files).
       I am in the process of doing more testing so I cannot say much more. I will return when I have more useful information...

  • Help! OS 10.3 looping in bootup process

    First off, I am a newbie when it comes to setting up an OS X installation. I've been working in OS 10.3 for a while, currently using OS 10.3.9 at work, and have familiarity with the environment. What I'm not familiar with is getting started, and that's why I'm asking for guidance here.
    We bought a used G4 Sawtooth, which just arrived a couple of days ago. I hooked it up and everything looked fine. On booting up, got the chimes and then a welcome to the Mac video and the create an ID part. Walked through this part until I got to the create a .mac account. I don't want to create one, so I left everything blank and tried to go to the next page. Instead it started going through the boot-up. Software Update came up and then crashed. Right now, the system keeps going through a partial bootup (blue aqua background), then the menu bar blinks out, comes back and the cursor keeps going back and forth between normal and an endless spinning beachball. I think it's stuck somewhere in the boot-up cycle. I tried doing a safe boot and got the same results.
    I've been scouring the Mac forums since for some ideas. I have gone into single user mode and repaired the login preferences. Now I get the login window and it lets me in. Then I get the blue screen with the blinking menu bar and the cursor/beachball combo all over again. I never get to see an icon of the hard drive or the dock. I can't even figure out what's on the machine... I also tried booting from the Panther CD and using Disk Utility to repair the hard drive and permissions (which it happily did). No difference. Also resetting the PRAM -- now I'm getting kernel panics on some restarts.
    So, do I need to reinstall Panther? The disks I have are 10.3.2, but it's supposedly running 10.3.9. I have no idea if OS 9.2 is installed separately. (I'm trying to contact the previous owner re some of that info, but haven't heard back yet.) I would really like to set this baby up so it can boot up in both 9.2 and 10.3. I'm going to have to apply all the updates again if I reinstall, right? Also, what about the firmware? What can I do about that, when I can't even get to a point in the bootup process where I can log onto the Internet -- should I order an update CD?
    The machine has two PCI cards. One is a SCSI card, the other has two extra USB ports. Do I need to hunt down drivers for these, as well?
    I'd appreciate it very much if the Mac community here can get me pointed in the right direction. I'd really like to get this machine up and running. Thanks!
    G3 beige (OS 8.6), G4 Sawtooth, G5   Mac OS X (10.3.9)  

    EmDeeH, welcome, Boot up from your install CD (C key down) and when you reach the screen to select a destination drive, click on the drive once, then click on the Option button. Select the Erase and Install option, click on OK.
    Also it is a good idea at this point to select Zero all data, this can be a very time consuming feature depending on the size of your HD, but believe me it is well worth it. You should now be ale to proceed with the install.
    If you are suspect of the Software Updater then cancel when asked and just download the 10.3.9 Combo Update here.
    Repair Permissions.
    Joe
    Power Mac G4 Gigabit Ethernet   Mac OS X (10.3.9)   1.5 GB Ram, ENCORE/ST G4, Tempo SATA, ATI Radeon 9000, Adaptec 4000

  • Problems getting Sawtooth to boot

    First off, I am a newbie when it comes to setting up an OS X installation. I've been working in OS 10.3 for a while, currently OS 10.3.9, and have familiarity with the environment. What I'm not familiar with is getting started, as that's why I'm asking for guidance here.
    We bought a used G4 Sawtooth, which just arrived today. I hooked it up and everything looked fine. On booting up, got the chimes and then a welcome to the Mac video and the create an ID part. Walked through this part until I got to the create a .mac account. I don't want to create one, so I left everything blank and tried to go to the next page. Instead it started going through the boot-up. Software Update came up and then crashed. Right now, the system keeps going through a partial bootup (blue aqua background), then the menu bar blinks out, comes back and the cursor keeps going back and forth between normal and an endless spinning beachball. I think it's stuck somewhere in the boot-up cycle. I tried doing a safe boot, but got the same results.
    I've never gone through the create an account part before -- other people have done it for our previous and current machines. I think I may have done something wrong. Or maybe something's loose from shipping. Do I need to reinstall and start over? I'd sure appreciate some pointers on how to get this G4 up and running properly.

    EmDeeH, welcome to Apple Discussions.
    What CD/DVD with the OS X install software are you using? Is it a universal/reatil version? If it is one that came with another Mac, it won't work.
    If the Mac's HD was wiped clean when you got it, use the Disk Utility to wipe it clean again & try a reinstall.
    Another possibility. The Mac may not have been plugged in to AC power for a while & the internal memory battery is weak/discharged & may need to be replaced. See Mac PRAM, NVRAM, CUDA/PMU & Battery Tutorial
    Cheers, Tom
    Cheers, Tom

  • Report Generation Exe Error

    Hello,
     I am using LV 8.6.1 with the 1.13 report generation toolkit and I am having problems getting my built exe to work.  I am trying to open an excel template and populate it with new data.  I have broke the vi down to just opening excel - opening the template and then fill in some data.  But at this point excel does not open at all.  And naturally everything works fine in the development environment.
    Error Code: -2147352573
    Member not found in NI_ReportgenerationToolkit.lvlib:
    Excel_open_workbook.vi
    NI_Excel.lvclass: new reportsubvi.vi
    I read a few help pages that said to add \vi.lib\utility\NIreport.llb and LVclass directories to the project folder and add them to the always include section of the build.  But no luck so far.
    Side question:  The machine I want to use this on has 8.6.1 Full which does not have the extra excel functions that my developer has.  Is there a way to install the DEV report generation toolkit in the full version?  Then I would not need to build an exe.
    UPDATE:  I just tried the exe on a different machine that has a developer suite installed and it worked fine.  So I guess I need to find out what else I need to add to the build to make it work.
    Message Edited by _Bryan on 06-16-2010 11:58 AM
    Solved!
    Go to Solution.

    There should be some info on this in the KB.
    But first you should make sure that your version of the report generation toolkit actually supports excel 2000 (which is 10 years old)
    That should be in the release notes of the toolkit
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • Can using query create aging report for GL Account

    Hi all expert,
    I have a challenge scenario which customer request print out aging report for the following GL Account.
    This is not a business partner account. However, customer want display like aging report.
    30 days aging report for the following GL accounts by projects:-
         i)     WIP (Work In Progress) account
         ii)     Accrued Revenue account
         iii)     Accrued Cost account
    Examples:
                            Current Balance       30 day   60 day  90 day   120 day
    Account  WIP         10000               2000        3000      5000     0
    Any idea or example given? If yes, can you provide a query here?
    Regards,
    Eric Tan

    Hi Eric
    In standard SAP Business One this is difficult as the reports are 2 dimensional. To achieve this you will need to write multiple select statements into a temporary table and then select the final result from the temp table. Here is a sample for you to test:
    USE [*DATABASE_NAME*]
    GO
    /****** Object:  StoredProcedure [dbo].[REPORT_NAME]    Script Date: 04/24/2009 13:17:21 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    CREATE proc [dbo].[*REPORT_NAME*]
    as
    set nocount on
    begin
    DECLARE @Day_no varchar(2)
    DECLARE @Month_no varchar(2)
    DECLARE @Year_no varchar(4)
    DECLARE @Start_Date Datetime
    SET @Day_no = DAY(GetDate())
    SET @Month_no = MONTH(GetDate())
    SET @Year_no = YEAR(GetDate())
    SET @Start_Date = @Year_No + '/' + @Month_no + '/' + @Day_no --  + '/' + @Year_No
    IF OBJECT_ID(N'tempdb..#CRDAGEING', N'U') IS NOT NULL
    drop table #CRDAGEING
    SELECT T0.[CardCode] AS [CardCode], T0.[CardName] AS [CardName], -T0.[Balance] AS [Balance], CAST(0 AS MONEY) AS [Current], CAST(0 AS MONEY) AS [1Week], CAST(0 AS MONEY) AS [2Weeks], CAST(0 AS MONEY) AS [3Weeks], CAST(0 AS MONEY) AS [4Weeks], CAST(0 AS MONEY) AS [5Weeks], CAST(0 AS MONEY) AS [6Weeks], CAST(0 AS MONEY) AS [Over6Weeks], CAST(0 AS MONEY) AS [Avg3Months], CAST (0 AS MONEY) AS [Onhand] INTO #CRDAGEING FROM OCRD T0 WHERE T0.[CardType] = 'S' -- and T0.[CardCode] <> '' --and T0.[DocDate] >= @FromDate AND T0.[DocDate] <= @ToDate
    INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] <= @Start_Date GROUP BY T1.[ShortName]
    INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] >= DATEADD(DAY,1,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,8,@Start_Date) GROUP BY T1.[ShortName]
    INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,8,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,15,@Start_Date) GROUP BY T1.[ShortName]
    INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,15,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,22,@Start_Date) GROUP BY T1.[ShortName]
    INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,22,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,29,@Start_Date) GROUP BY T1.[ShortName]
    INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,29,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,36,@Start_Date) GROUP BY T1.[ShortName]
    INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,36,@Start_Date) and T1.[DueDate] <= DATEADD(DAY,43,@Start_Date) GROUP BY T1.[ShortName]
    INSERT dbo.#CRDAGEING SELECT T1.[ShortName], NULL, 0, 0, 0, 0, 0, 0, 0, 0, -SUM(T1.[BalDueDeb] - T1.[BalDueCred]), 0, 0 FROM JDT1 T1, OCRD T2 WHERE T2.[CardType] = 'S' and T2.[CardCode] = T1.[ShortName] and T1.[DueDate] > DATEADD(DAY,43,@Start_Date)  GROUP BY T1.[ShortName]
    SELECT SR.[CardCode], MAX(SR.[CardName]), SUM(SR.[Balance]) AS [BalanceOwing], SUM(SR.[Current]) AS [Current], SUM(SR.[1Week]) AS [1Week], SUM(SR.[2Weeks]) AS [2Weeks], SUM(SR.[3Weeks]) AS [3Weeks], SUM(SR.[4Weeks]) AS [4Weeks], SUM(SR.[5Weeks]) AS [5Weeks], SUM(SR.[6Weeks]) AS [6Weeks], SUM(SR.[Over6Weeks]) AS [Over6Weeks] FROM dbo.#CRDAGEING SR GROUP BY SR.[CardCode] ORDER BY SR.[CardCode]
    END
    Go to Microsoft SQL Studio manager and select your company database. Then expand the list and select Programmability > Stored Procedures. Right click on Stored Procedures and select New Stored Procedure. Copy the above code over the code in the edit window and change the database name as well as report name. Then select Execute to create the stored procedure. If you make changes, remember to change the word CREATE to ALTER (with other words CREATE for the first execute, and ALTER thereafter). Then in SAP Business One create a new query and leave everything blank. Click on execute and select the pencil to change to edit mode. Remove the words SELECT and type in EXEC REPORT_NAME (change the REPORT_NAME to the name you used in SQL). Then execute again and the results will be displayed in SAP Business One.
    Let me know if you get stuck. Remember the above is an example and will need to be changed to use your tables and fields as required. The basic idea is to move across by one column with each select statement. So for example the first select statement does the CURRENT column, the second one the 30DAYS column, and so on.
    Kind regards
    Peter Juby

  • Xcontrol does not work in built application

    I can't seem to get my custom xcontrol to work in the final built application.  It works perfectly fine when the top-level .vi is started from the development environment.  But all I get is the broken control image when I run the built application.  Is there something I'm missing in the build definition?
    I tried puting the thermometer xcontrol example into a built application and everything works fine.  The build definition only included the top-level file, so I don't think it's a problem with support/dynamic files...
    By the way, is there some trick to maintaining these xcontrols?  I love the concept, but man they are a pain in the butt to work with.  One wrong move in the project manager and they're messed up for life.  I finally learned to back everything up on a regular basis so I wouldn't lose everything if it one decided to go psycho on me.
    TIA,
    Greg

    I've got it working now, but I'm going about it in a round-about way.  My application has (had) a splash-screen/launcher vi that dynamically loads and launches the actual top-level user-interface vi.  The top-level vi was included in the build definition as a dynamic file.  This is the ONLY dynamic call in the entire application.  All other vi are called the normal way on the wiring diagram.  I could never get the xcontrol to work this way.  I even tried including ALL of the relevant files as dynamic/support file and could never get it to work.  In one experiment, I placed an xcontrol on the top-level vi (the top-level vi doesn't have any of the xcontrols, only a couple dialog-box sub-vis that it calls).  Again, everything worked fine from the development environment.  But, when compiled, the top-level vi would fail to start completely.  I never bothered to check what the execution state of the top-level vi was before I called it, but I assume it was "bad" so the dynamic call would fail.
    I got it working by eliminating the dynamic call and calling the top-level vi as a normal sub-vi from the wiring diagram.  BUT, it still had problems and would always ask me to find a couple files from the 'XControlSupport.lvlib', specifically 'Action.ctl' and 'Container State.ctl'.  The xcontrol also uses the standard 'eventkey.ctl' from the 'event_ctls.llb' and it would ask me to find this file every time as well.  I tried including the libraries in the project and including these libraries in the build as dynamic/support files, but still no good.  To fix the problem, I copied these files into my project folder, specifically included them in my project, and then replaced all of the controls wherever they appeared with the corresponding controls included within the project.
    Message Edited by GTM on 07-14-2006 08:48 AM

  • Option to Hide from Strangers

    My purpose with this post today, to ask for the option to privatize everything that is currently showing publicly in skype (an option that is not yet available, but I hope someday will be added to a future update to skype).
    I have read numerous posts revolving around this same issue. One repeated solution is not a solid work-around, this is the solution I quote from Elaine:
    Quote: "My recommendations are to remove all information from your profile that is displayed to the public by default.  Only a few of the profile settings offer drop-down menu choices (public, contacts-only, or private).  Replace your avatar or picture with something neutral.  Choose blank or not specified for every setting you can, particularly the Gender setting."
    Following the suggestion, I have removed all information I can remove. I have set all settings to "contacts only" that can be set to such. I cannot change my avatar because I cannot save changes (without adding my last name, which is currently blank). I have left everything blank that I can leave blank. I have been contacted three times after I have made these changes, as suggested.
    Earlier today (on my main skype acct, not this one), I got an IM "are you online?" from someone who is not on my contacts list. That IM shouldn't even come in when I have my settings to only allow contacts to send IM's. This glitch is not my concern, and wouldn't be an issue if I could hide myself from public searchs.
    That IM was the second stranger to try to contact me today. I've only had four strangers like this so far, started two weeks ago, and the frequency between these strangers attempting to contact me is increasing. One of my friends says he gets about 50 of these bots a week, FIFTY A WEEK! He blocks and reports each one, but his time is VERY precious, and very limited and he shouldn't have to bother with this. If only he could hide his skype acct from searches.
    I cannot change my profile because the "Edit Profile" refuses to save unless I add a last name. Lucky for me, when I created years ago, I left everything blank that was not a required field (at the time, Last Name was not required). So for the suggestion to leave stuff blank and set everything to contacts only: Check check and check (except the picture and first name, because I cannot change those) and I am still contacted.
    I do not like complete strangers being able to find me, and send contact requests. I just do not want this to be happening. The inability to hide myself from the public is unnaceptable! I want to hide my skype account from the public (I created this side account just to post on these publicly viewed forums, keeping my main account as hidden as possible).
    I know, I know there is no "current" option to hide these fields of information that contain stuff the Public can see... but Skype programmers can change that, and give us the option for completely private profiles! Come on, look at all the threads regarding this! Forum Moderatos tell us to "not fill in the fields", and block and report any of these fishy contacts.... but your customers cannot create an account without putting in our first and last name, which ends up being Public, and unhidable. This is just absurd!
    Something has to be changed. There's many of us who do not want to bother with blocking and reporting a dozen people EVERY DAY. Some of us are busy people, and need skype for what we do. Many of us do not want to bother trying to figure out "if" this new contact request is a future business associate, or some pervert who wants to boast about their body, or worse, blackmail us with pictures. We (the customer) shouldn't have to deal with these fakers several times every day. Just give us the option to hide ourselves, so these fakers can't find us.
    We want preventative measures that work! We want to prevent strangers from finding us in searches. Block and report tactics are not good enough! Leaving our profiles blank (deleting as much as we can) is not a solid solution, nor a solid work around, because they can still contact us!
    Please consider that not everyone wants to be found by strangers, especially strangers who use copy and paste to say they find you interesting (then proceed to elaborate on their attractive body parts).
    This... this ability for robots and liars to find us has got to stop. Please give your customers the option to privatize all of our information, the option to completely hide us from public searches, the option to completely hide us from the fake people who just want to trick us!
    Stop the suffering and time wasting of good people. Give us a way to hide ourselves from these robots, so they can never find us people who do not want to be found!
    I am an introvert who wants to stay away from MOST people. I have my small group of contacts, and I am happy with just them. I do not use searches to "make friends", as some of these botters claim to be doing. They just annoy me, and I have blocked and reported each of them. I wish I didn't have to deal with them at all. I wish they wouldn't try to contact me to begin with. I wouldn't have to deal with them, if they cannot find me in the first place.
    Sample Conversation (from memory):
    Bot: *Contact Request*
    Me: Who are you?
    Bot: yay! someone to talk to! how are you?
    Me: Wondering if you are an auto responder. Please contact me outside where you know me from, do not contact me here again until you do so.
    Bot: I found you on searches, I am looking for a friend
    Me *blocks and reports*
    I do not want to deal with conversations (like above) on a daily basis. Please make the insanity stop. Look at all the posts about this same issue! Please let us have the option to hide ourselves from Public searches. Please let us hide ourselves from these bad people, robots, liars, blackmailers, scam artists, and all other fakers. Please don't expect us to deal with these strangers.
    And for all the victims who are sucked into these stranger's deceptive conversations, I feel really sorry for you. I was once ignorant like that. I feel the pain.
    TL;DR:
    Add an option to hide our skype from Public searches.
    Thank you for your time.

    Hi, HiddenMist,
    Following the suggestion, I have removed all information I can remove. I have set all settings to "contacts only" that can be set to such. I cannot change my avatar because I cannot save changes (without adding my last name, which is currently blank). I have left everything blank that I can leave blank. I have been contacted three times after I have made these changes, as suggested.
    In the Windows Desktop version of the Skype software, I can navigate to my profile settings: Skype -> Profile -> Edit your profile.  
    My work-around still works ... for me, at least, which is why I continue to recommend it.
    Hi, Bartholomue, and welcome to the community,
    Did you know that if you look up how to delete your name from the Skype directory, it says that you are effectively disabling your account? Your name will not show up in searches, and it will remain in the contact lists of those who have already added you, but those contacts will no longer be able to call you.
    Yes, indeed, this is true.
    Best regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • How do or can I switch gmail account to exchange?

    I have a 3rd generation iPod Touch.  I updated to iOS5 this summer, but some programs/apps got very slow, but the biggest, consistent problem is the Calendar app.  I'm thinking perhaps this could be related to email and gmail.  So here are my questions about email settings.
    I want to try switching my "gmail" account to "exchange."  Is this a good idea, would it help with push capability and perhaps be better for calendar too?  Will it conflict and be a problem to have 2 "exchange" accounts or will they cause problems with each other?
    I have 2 email addresses / accounts that get email on my iPod. They are both @gmail.com addresses set as IMAP.
    One is set as: "Gmail" with Mail, Calendars and Notes "ON."  This account is my main account and in the last couple of months, my email no long "pushes" to the device (i.e. it won't show up in notifications center, or download at all until I go to the inbox screen).  When you go to look at the settings of this "gmail" account there is no slide bar about mail folders to push, it's just not there. 
    The 2nd is set as "exchange" with "Mail" only turned on.  (I read an article way back that said this is the way to have 2 email addresses that stay separate but can be checked on one device.)  This email account does "push" new messages as there is a slider bar that has this option turned on. 
    So the questions are above and here to:
    1. Can I switch a "gmail" account set up on iPod Touch to "exchange."  If so, how do I do this?  Will I lose all data (email, calendar, notes) and info currently downloaded to the device?  Will it all come back if I make a change?
    2. Will this work with the 2nd "exchange" gmail account?  Will it keep the 2 email addresses separate with different inboxes and folders as they are in gmail?  Will there be any conflict or corruption or funky problems having 2 "exchanges"?
    3. Any sense of whether "exchange" is better for gmail calendar functionality too?  I have a horrible time with the Calendar app simply not working, it freezes, it shows everything blank but when I quit and reload it sometimes comes back and all my data is there.  I've downloaded other calendar apps (Week Calendar and CalenMod) and they also have problems so I feel it's got something to do with how the wifi sends info to the device.
    Thanks!
    iPod Touch 3rd generation, iOS 5.1.1. Syncs to MB Pro running OS 10.6.8.

    Okay, thanks for the article and the heads up that exchange is going away soon. But that article is talking about setting up a "gmail" account in settings which is what I have already and push doesn't seem possible this way. Is there another or better option to have 2 separate email gmail accounts fetching and pushing data to one device?

  • How to configure OraMTS to allow WCF using MSDTC access  OracleDB  On unix?

    How to configure OraMTS to allow WCF using distributed transactions to access the ORACLE database On Linux/Unix ?
    Env:
    1. DB-tier node , ORACLE database (version: 11.2.0.1.0) on Redhat Linux server ;
    2. middle-tier node ,Both the client, the MS DTC and Oracle MTS run on the same computer , Win7 x64 OS , installed .Netframework 4.0, ODP.net (ODAC112030), and configure the component services in a distributed transaction;
    Has done the configuration:
    1. ORACLE database on a Linux server (version: 11.2.0.1.0) has execute oramtsadmin.sql script;
    2.ORACLE database on a Linux server (version: 11.2.0.1.0) has execute the following script, Creating an Access Control List (ACL);
    BEGIN
    -- Create the new ACL, naming it "OraMTSadmin.xml", with a description.
    -- This provides the OraMTS administrative user e.g. MTSADMIN user FOO
    -- the privilege to connect
    DBMS_NETWORK_ACL_ADMIN.CREATE_ACL('OraMTSadmin.xml',
    'Allow usage to the UTL network packages',
    'ORAMTS', TRUE, 'connect');
    -- Now grant privilege to resolve DNS names to the OraMTS administrative user
    DBMS_NETWORK_ACL_ADMIN.ADD_PRIVILEGE('OraMTSadmin.xml' ,
    'ORAMTS', TRUE,'resolve');
    -- Specify which hosts this ACL applies to, in this case we are allowing
    -- access to all hosts. if one knew the list of all Windows middle-tier,
    -- these could be added one by one.
    DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL('OraMTSadmin.xml','*');
    END;
    3. ORACLE database on a Linux server has set JOB_QUEUE_PROCESSES = 1000;
    4. restart Oralce;
    5.Test code as follows :
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using JetSun.Infrastructure;
    using Microsoft.VisualStudio.TestTools.UnitTesting;
    using JetSun.Infrastructure.ServiceModel;
    using JetSun.DataModel.Cis;
    using JetSun.TestFramework;
    using System.IO;
    using System.Data.EntityClient;
    using System.Data.Objects;
    using ConsoleApplicationTest;
    using System.Transactions;
    namespace Core.Tests
    [TestClass]
    public class EfOracleTest
    public TestContext TestContext { get; set; }
    [TestMethod]
    public void GetEntities()
    //string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=jetsun;PERSIST SECURITY INFO=True;USER ID=SYS;enlist=true";
    string cn = "DATA SOURCE=HIS30;DBA PRIVILEGE=SYSDBA;PASSWORD=mtssys;PERSIST SECURITY INFO=True;USER ID=mtssys;enlist=true";
    DbsSetting s = new DbsSetting(Dbs.IP, DbsProvider.Oracle, cn);
    Runtime.SetDeploymentDir(TestContext.TestDeploymentDir);
    File.Copy("E:\\VSTS\\MedicalHealth\\bin\\Debug\\DataModel.Cis.Oracle.dll", Path.Combine(TestContext.TestDeploymentDir, "DataModel.Cis.Oracle.dll"));
    //File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.csdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.csdl"));
    //File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.ssdl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.ssdl"));
    //File.Copy(@"E:\VSTS\MedicalHealth\DataModel\Oracle\DataModel.Cis\EdmDiagnose.msl", Path.Combine(TestContext.TestDeploymentDir, "EdmDiagnose.msl"));
    File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.csdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.csdl"));
    File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.ssdl", Path.Combine(TestContext.TestDeploymentDir, "Model1.ssdl"));
    File.Copy(@"D:\vsts_test\ConsoleApplicationTest\ConsoleApplicationTest\bin\Debug\Model1.msl", Path.Combine(TestContext.TestDeploymentDir, "Model1.msl"));
    string connectionString = s.ToEdmConnectionString(typeof(EdmEncounter), false);
    //// Initialize the EntityConnectionStringBuilder.
    //EntityConnectionStringBuilder entityBuilder =
    // new EntityConnectionStringBuilder();
    ////Set the provider name.
    //entityBuilder.Provider = s.Provider.Provider;
    //// Set the provider-specific connection string.
    //entityBuilder.ProviderConnectionString = cn;
    //// Set the Metadata location.
    //entityBuilder.Metadata = string.Format(@"res://{0}/EdmDiagnose.csdl|res://{0}/EdmDiagnose.ssdl|res://{0}/EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
    //entityBuilder.Metadata = string.Format(@".\Model1.csdl|.\Model1.ssdl|.\Model1.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
    //connectionString = entityBuilder.ToString();
    ////using (Entities edm = new Entities(connectionString))
    //// foreach (var item in edm.ENCOUNTERs.Take(10))
    //// Console.WriteLine("{0}\t{1}", item.ENCOUNTERID, item.DISPLAYNAME);
    //entityBuilder.Metadata = string.Format(@"res://*/EdmDiagnose.csdl|.\EdmDiagnose.ssdl|.\EdmDiagnose.msl", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
    //entityBuilder.Metadata = string.Format(@"res://{0}/", "DataModel.Cis.Oracle, Version=3.0.0.0, Culture=neutral, PublicKeyToken=null");
    connectionString = s.ToEdmConnectionString(typeof(EdmFeeInfo), false);
    try
    //using (TransactionScope tx = new TransactionScope())
    using (TransactionScope scope = new TransactionScope(TransactionScopeOption.Required, new TimeSpan(0, 0, 30)))
    //using (var dbcn = s.Provider.CreateConnect(connectionString))
    using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
    //edm.Connection.CheckOpen();
    //using (edm.Connection.BeginTransaction())
    foreach (var item in edm.FeeInfos.Take(100))
    TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
    item.Amount = item.Amount * -1;
    edm.SaveChanges();
    // using (EdmFeeInfo edm2 = new EdmFeeInfo(connectionString))
    // edm2.Connection.CheckOpen();
    // edm2.Connection.EnlistTransaction(Transaction.Current);
    // foreach (var item in edm2.FeeInfos.Take(100))
    // item.Amount = item.Amount * -1;
    // edm2.SaveChanges();
    // throw new NotImplementedException();
    TestContext.WriteLine("-----------1---------------");
    using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
    foreach (var item in edm.FeeInfos.Take(100))
    TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
    throw new NotImplementedException();
    catch (Exception ex)
    TestContext.WriteLine((ex.InnerException ?? ex).Message);
    TestContext.WriteLine("-------------2-------------");
    using (EdmFeeInfo edm = new EdmFeeInfo(connectionString))
    foreach (var item in edm.FeeInfos.Take(100))
    TestContext.WriteLine("{0}\t{1}", item.EncounterId, item.Amount);
    6. the test results are as follows:
    4 125
    4 835.45
    4 3458
    4 2350
    4 200
    4 100
    4 300
    4 123
    4 234
    无法列入分布式事务处理 （Could not be included in the Distributed Transaction）
    -------------2-------------
    4 125
    4 835.45
    4 3458
    4 2350
    4 200
    4 100
    4 300
    4 123
    The main error message:无法列入分布式事务处理 （Could not be included in the Distributed Transaction） , not use distributed transaction everything is normal.
    My test environment MS DTC and Oracle MTS Recovery Service run on the same computer, but OracleMTSRecoveryService registry values under£º HKEY_LOCAL_MACHINE \ SOFTWARE \ Wow6432Node \ ORACLE \ OracleMTSRecoveryService ,not under HKEY_LOCAL_MACHINE \ SOFTWARE \ ORACLE,I do not know that there is no relationship.
    Is not configured incorrectly?Who can help me, thank you very much!

    Do you really have a requirement to push data from Oracle to Access rather than pulling data from Oracle to Access? It would be exceptionally unusual to push data from Oracle to Access.
    Pushing from Oracle to Access would means that you want some Oracle process running that is updating Access. But you said that your Access database was on your "local desktop" which implies that it is not running on a server where it is always available. So that means that the Oracle process is going to regularly encounter (and report) errors because the Access database is not available. In turn, that's going to mean that your push process is either going to cause the underlying transaction to fail or it's going to mean that the push process is going to have to implement a fair amount of code to queue data to be pushed at a later date (and track all those changes) which is no small task. None of that seems particularly pleasant.
    On the other hand, Access is designed to pull data from real relational databases like Oracle. That's the far more normal approach architecturally. It doesn't require an Oracle process, it doesn't generate errors on the Oracle database when the local desktop is down, etc.
    And, of course, I'm assuming that introducing Access is even architecturally reasonable. Most organizations would be extremely hesitant to allow data from an Oracle database to get moved into Access because that quickly means that they lose control of the data from a security standpoint, that there are now multiple copies of the data floating around when changes & corrections are made, etc. That causes all sorts of headaches normally above and beyond the headaches that pushing from Oracle to Access would create.
    Justin

  • Change the Owner of SQL Reporting Services Subscription

    So, I am having this odd issue after our Sysadmin changed my user name from what it used to be to something new.
    Now, subscriptions for reports that I had created for users are not working anymore. And it gives me following error,
    Failure sending mail: The user or group name 'DOMAIN\MyUser' is not recognized.Mail will not be resent.
    A quick Google, landed me on
    this old tip from MSDN about changing owner of report. According to that tip all I have to do is to update all entries in  "subscriptions"  table from older user to new user id, but for that new user should exist in "users"
    table  but in my case it didn't exist. So as suggested in very bottom of that same tip, I created (and deleted) bunch of items using Report Server Manager. But it didn't create my new user.
    Then, I removed old subscription and created new subscription. But it still shows my old username as owner of that subscription.
    So my question is, how do I change Owner of Subscription ?
    UPDATE:
    I forgot to mention that I am using SQL Server 2008 SP3
    TIA,
    Jack

    ListSubscriptions only takes one argument...
    http://technet.microsoft.com/en-us/library/reportservice2010.reportingservice2010.listsubscriptions.aspx
    If i grab the first 4 lines of that script then write the subscriptions variable to screen i can see all my subscriptions in our system.
    As mentioned the script is meant to get you started.  It could be failing on the authentication.  So depending on how your system is configured you might need to do something different in how you connect.  You'll probably have to do a little
    research to get everything to match up with your environment and configuration.
    I am not sure if it has something to do or not ... but I am using SQL Server 2008 SP3. And so if I use code like below,
    $ssrsProxy = New-WebServiceProxy -Uri "http://<report server>/reportserver/reportservice2005.asmx" -UseDefaultCredential
    $ssrsProxy | Get-Member
    Then I can see that ListSubscriptions has following definition, and it shows that it is actually expecting 2 arguments.
    ListSubscriptions                            Method     Microsoft.PowerShell.Commands.NewWebserviceProxy.AutogeneratedTypes.reportservice2005_asmx.Subscription[] ListSubscriptions(string Report, string Owner)
    May be it is because I am using SQL Server 2008 ... not sure.

  • No requisition found; verify your entries in SRM 7.0

    HI Udo,
    i am using SRM 700 on level 005. I want to use a RFx-Szenario, for that i create a Purchase Requisition in ECC via ME51N, then i release it via ME54N. After that it will be send via ERPSourcingReuest Webservice, over XI to the SRM System. In the SRM System the XML Message is processed and has the status "Transfer to external status" with a green bolt icon. I don't see an error Message in tcode /SAPPO/PPO2 So this looks fine to me?
    So I go into the SRM Portal Website, Purchasing --> Sourcing --> Carry Out Sourcing... there i enter my Purchase Requisition Number, which i have in the ECC into the Field "External Requirement", then i press "Search" and get the Warning Message
    "No requisition found; verify your entries". No Purchase Requisitions are displayed - it is also nothing disblayed when i enter * or leaving everything blank.
    What am i doing wrong, what is missing? Where can i see maybe further errors, if there is no message in /SAPPO/PPO2? In which tables should the data be written out of the XML Message?
    Thank you in Advance for your help
    Best Regards
    Udo

    Hi all,
    the problem was that the relation between plant and product was somehow mixed up. We created it new and now we can process the mesasges.
    But i have one more questions, which Monitoring Transactions i have for SRM (Abap/Portal)? When I was in Debug Mode i saw error Messages like:
    A     /SAPSRM/CH_SOA_MSG     84     Purchasing group for follow-on document missing
    A     BBP_PD     245     Purchasing group for follow-on document missing
    A     BBP_PD     246     Purchasing organization for follow-on document missing
    A     BBP_PD     249     Document type for determined backend system missing
    E     BBP_PC     13     No default value is defined
    E     BBP_PC     22     No tax data maintained
    E     BBP_PD     276     Back-end data could not be read
    E     BBP_PD     358     Select a location that is assigned to the plant chosen
    E     BBP_TAX     1     Tax code could not be determined
    E     BBP_TAX     13     Not possible to calculate tax
    But i only saw that in the monitoring? These Errors can happy every time and i need to see them.... can you please tell me, where i can have a look?

Maybe you are looking for