Everything but the touchpad works, why oh why....

my touch 20gb has given up the ghost, sort of. everything but the touch pad works which kinda puts the kibosh on everything else, iv tried the disk clean up and reloading the firmware but because the touchpad doesnt work i cant do either of these things. anyone any suggestions advice etc would be much appreciatedMessage Edited by gareth on 02-20-2005 09:59 PM

okay so iv sent the initial e-mail and got a reply from that, iv now replied again to seek further (non automated) assistance, i was just wondering how long i should expect for the reply to take...
thanks man this his been extremely helpful in an unpleasant situation

Similar Messages

Everything but the phone works! How am I suppossed to make a call on the iPhone 5?

Just took the iPhone 5 out of the box, restored from my 3GS backup. Everything but the phone works! How am I suppossed to make a call on the iPhone 5?

Have you tried turning it off and then back on? Do you see a carrier signal?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

Why hasn't apple created its own USB or USB adapter for their products.? Since an iPhone or iPad make traveling and doing school work or on the job work, why not create a USB to make transferring information easier too.?

Why hasn't apple created its own USB or USB adapter for their products.? Since an iPhone or iPad make traveling and doing school work or on the job work, why not create a USB to make transferring information easier too.?

In some folks' version of the world, you have plenty of ways. YOu have the aforementioned services, you have iCloud, all you need is an internet connection and you're good to go. And that works perfectly...if you always have the internet.
If you want more non-internet dependant ways, then the best way to let Apple know is to send them feedback. They don't monitor or respond to this forum (Beyond removing rule breaking posts) but they do at least log feedback. However, the lack of a file manager will always be an obstacle. There are some apps out there that have at least a pseudo file manager - as in the ability to move documents into multiple other apps. I have Readdle Docs which I can use to download and move things around with, but again, back to the internet or wireless.

Hey guys, im in need of seriously help. i let a friend jailbreak my iphone and now its jus stuck at the apple screen. i tried rebooting it and everything but nothin is working. does anyone have any good advice?

hey guys, im in need of seriously help. i let a friend jailbreak my iphone and now its jus stuck at the apple screen. i tried rebooting it and everything but nothin is working. does anyone have any good advice?

put the phone in DFU mode (do a search for how to do this) and restore to the latest firmware. you may have to download the firmware from apple and when selecting restore or update in itunes press the shift key and select the firmware.
Hope this helps

Follwing query fails on one database, but the same works on other Database

Hi,
The following SQL fails on one database with ORA-01722 but the same works on other database.
SQL> SELECT i.version, d.name, i.instance_name, i.host_name
FROM v$instance i, v$database d, v$parameter p 2
3 WHERE p.name = 'instance_number'
4 AND DECODE(p.value, 0, 1, p.value) = i.instance_number;
AND DECODE(p.value, 0, 1, p.value) = i.instance_number
ERROR at line 4:
ORA-01722: invalid number
both databases are at same version (10.2.0.1) both are on same machine.
Initailly I suspected NLS settings, I am surprised to see NLS settings are also same on both the databases.
Any thoughts why is it happening

Thanks for the reply
Yes, i know that i am comparing varchar against number.
bu there is no way that the database where the query is working has correct types on both sides as the tables are standard oracle dictionary tables.
Yes, i tried this earlier, it works
AND DECODE(p.value, '0', '1', p.value) = to_char(i.instance_number)
it is very weired to see that error, i feel it something else that causing the trouble.

DV7 1175nr installed windows 7 ultimate 64 bit everything but blu ray works

everything but blu ray works I've removed the blue ray like hp said and to see if it would re install no luck I've installed all kinds of version of the hp smart dvd and nothing I've tried chatting with hp and they have been no help
if i put a regular dvd in its no problem but if i put a blu ray it says nothing no name just says no disc in bd drive and it opens it i installed the windows 7 64 bit ultimate edition so that i would upgrade i had the pre release trail and it was ending so i installed it now i have this problem boo

I have the exact same model and have Win7 64 bit on it. You have to install a Blu Ray compliant decoder like Power DVD 8, which is what I have. Then it will play Blu Ray movies. I also have Nero 9 on it which helps with working with Blu-Ray data. I am not sure what it was capable of doing as far as Blu-Ray disks before I installed thse two programs. I believe Win7 has no native Blu Ray support.

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Maverick for everything but the dictation software. I'm a new pie to apple

I have a MacBook Pro running Lion. I need to use Lion to run my Dragon. I would like to partition my drive to use Mavericks for everything but the dictation software. I'm a newbie to apple

To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

When I try to burn a DVD from FCPX it burns everything but the video.

So far I am having this problem on only one project. I am very new to FCPX, so I'm thinking it's user error. When I share to DVD it burns everything but the actual video. I get audio and text effects but a black screen otherwise. The only thing I know that I've done differently from previous projects was using stabilization. I have since burned other projects to DVD with no problem, but this project will not export correctly.

Firefox 31 CONSTANTLY hangs in Win 8.1 . . . and as usual, FF reps on this site blame anything and everything but the culprit: FF. It is quite maddening.

Firefox 31 CONSTANTLY hangs in Win 8.1 . . . and as usual, FF reps on this site blame anything and everything but the culprit: FF. It is quite maddening. I would love for a software company to own up to their own problems. It would be SOO refreshing.

hello, mozilla can only address problems that are adequately reported: http://dblohm7.ca/blog/2014/08/14/diffusion-of-responsibility/

I have Adobe Premiere Element 7 installed and I use that as to editing my video's. I am having such a hard time trying to lightening a dark video. I tried everything but nothing is working. Please help

I have Adobe Premiere Element 7 installed and I use that as to editing my video's. I am having such a hard time trying to lightening a dark video. I tried everything but nothing is working. Please help

saloumehdaghighi
Premiere Elements 7, on what computer operating system?
In Premiere Elements 7, there are various effects for lightening a dark video. After applying one of these lighting effects, have you been editing these applied effects in Edit Effects/Properties Palette after you apply them?
Video Effects
Adjust - Brightness and Contrast, Auto Levels....
Image Control Panel that is a default Properties Palette panel along with Motion and Opacity....for Brightness, Contrast, Hue, and Saturation.
ATR

My phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

my phone doesn't ring when someone is calling, but the sound works otherwise, like the alarm etc. I have tried to fix it in settings but still not working. anyone else have this problem?

Thanks so much but none of that helped. It was driving me crazy because it would back up another external drive. I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
Thank you for your help and replying to this. Guess I made my own issue!

Copies are very bad, just faint lines. i thought i needed new ink but the printer works fine

copies are very bad, just faint lines. I thought I needed new ink but the printer works fine

copies are very bad, just faint lines. I thought I needed new ink but the printer works fine

Is there any way to change the color of the Firefox 4 menu button away from orange? It attracts my attention and as far as I can tell personas change everything but the menu button color.

Is there any way to change the color of the Firefox 4 menu button away from orange? It attracts my attention and as far as I can tell personas change everything but the menu button color.

You can change it with the App Button Color extension - https://addons.mozilla.org/firefox/addon/app-button-color

My iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???

ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you

Everything but the touchpad works, why oh why....

Similar Messages

Maybe you are looking for