Everything in my house is working fine on my wireless connection except my apple tv will not connect. how do i fix this?

i have no idea how to fix this. any help would be greatly appreciated

Morning foley13,
Thanks for using Apple Support Communities.
You can resolve many Wi-Fi issues by checking your network connection settings.
For more information on this, take a look at this article:
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Best of luck,
Mario

Similar Messages

  • My apple extreme wireless network is working fine with the macs but ios devices (iPhone & iPad) will not connect. I can see the network though. Everything was working until the ISP went down. Any suggestions?

    My apple extreme wireless network is working fine with two Macs but ios devices (iPhone & iPad) will not connect. I can see the network and it's telling me I'm connected but Safari says I'm not connected to the internet. Everything was working until the ISP went down. Any suggestions?

    Thank you, I've tried the support tips (resetting the network, checking security settings, etc.) and rebooting the network devices several times to no avail. I've actually been working on this for several days (when I can afford to have the network down).
    What I have to determine is what has changed in the setup...from when it WAS working just fine with all devices.

  • Firefox was working fine yesterday, but today it simply opens as a blank window. How can I fix this?

    When I open Firefox, it appears as a blank, black window with nothing to click on. Everything was working normally last night. Problem only appeared this morning. I tried System Restore, but it failed to complete successfully.
    I'm running Windows 7 on an MSI notebook. It's about three years old.

    Here's a screenshot of what I'm experiencing.

  • TS3092 my wireless apple mouse works to move the arrow but will not scroll. how can I fix this?

    my wireless mouse moves the pointer but does not scroll, how can I fix this?

    Check the setting in System Preferences > Universal Access > Mouse & Trackpad tab > mouse options.. button > check scrolling.
    If you have an older mouse with the trackball, it might just need cleaning.  Turn the mouse over and rub the trackball vigorously on paper or microfiber cloth.
    Regards,
    Captfred

  • The password I use for installing downloaded applications or installing basically anything isn't working but I didn't change it or let alone touched it. How do I fix this? I'm on an iMac 21.5 inch, Mid 2011 and Mac OS X Version 10.7.3

    The password I use for installing downloaded applications or installing basically anything isn't working but I didn't change it or let alone touched it. How do I fix this? I'm on an iMac 21.5 inch Mid 2011 and Mac OS X Version 10.7.3

    I've no idea why it has stopped working, but you could reset it:
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/

  • I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

    I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

    same thing happened to my S5.  We're beyond frustrated.

  • On my iPhone 5, Siri is not working on notes. How do I fix this?

    Siri is not working in notes. How can I fix this?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • The password I use for installing downloaded applications or installing basically anything isn't working but I didn't change it or let alone touched it. How do I fix this?

    The password I use for installing downloaded applications or installing basically anything isn't working but I didn't change it or let alone touched it. How do I fix this?

    iMac 21.5-inch Mid 2011
    Mac OS X Version 10.7.3

  • Unable progress the lines due to ware house not selected.How do we fix this? So that it will pick the warehouse automatically

    We are unable progress the lines due to ware house not selected. We checked the Defaulting rules everything looks good. But line Items not picking the Warehouse - based on the sourcing rules. 
    If we enter manually and then progress lines getting scheduled.
    How do we fix this? So that it will pick the warehouse automatically.

    Hi,
    The issue with ATP- it’s not sourcing from the ware house, even though the sourcing rules defined the correct warehouse. When we enter manually and progress –order is progressing.
    Thanks

  • My wireless internet is working with all of my other devices but my imac will not connect to the network?

    Can anyone help?  My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

    First run Software Update to make sure your iMac is up-to-date.
    Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are  pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
    Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • TS1398 Have 3 iPods and 3 iPads in our house. Our Internet is dlink. Two iPods and one iPad will not connect. Help?

    We have 3 iPods and 3 iPads in our house. To of the iPods and one of the iPads will not connect to the Internet. Our Internet is dlink. Can anyone help?

    Do the devices connect to other networks?
    Do they see the network?
    Any error messages?
    Do other devices now connect?
    Did they connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Recently bought a Pro. At home, It connects to my wifi, and internet, just fine. On the road, It will connect to wifi sites, but will NOT connect to internet. Other devices connect okay

    Recently bought a Pro. At home, it connects to wifi and internet just fine. On the road, it connects to wifi sites, but willl NOT connect to the internet, while Other devices, iPad2 and iPhone connect and browse just fine.

    this is Mac Pro forum
    You want the notebook forum: MacBOOK Pro
    https://discussions.apple.com/community/notebooks/macbook_pro

  • TS3274 I pad was working fine then started to to get a message I pad not connected to internet. Other devices are working in our home. wireless is working. Help

    I pad was working fine then when tring to access safari or facebook recieved a message Safari cannot open page because your I pad is not connected to the internet. How do I correct?

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Realplayer video downloader works in IE but not Firefox how can I fix this?

    My Realplayer video download function does not work in Firefox although it did several upgrades ago. It works fine in IE but the blue "record this video" does not appear in Firefox. I've searched all over the web for the "fixes" but none of them seem to work.

    hello rmctoledo, sorry we cannot provide support for third-party extensions or plugins here. you may have to use the support channels provided by real to search for a solution or report the problem to them. thank you for your understanding!

  • Detect displays seems to have quit working? The secondary monitor is bleeding into the MacBook Pro monitor. How can I fix this?

    I am using a MacBook Pro 2009, Snow Leopard (OSX 10.6.8). All of a sudden last night after a long day of work, my monitor resolution changed without warning and the secondary monitor display started bleeding into my laptop monitor. When I go to detect displays, it doesn't fix the problem. It looks like I need to switch to a larger display setting and the largest setting has disappeared.(The display seems to default to this setting where my screen bleeds into the laptop monitor.) When this started happening last night, I immediately shutdown and restarted to see if this would fix the problem. So far, it's still not looking too good.
    I also tried shutting the laptop and using the external monitor only. When I do this, the monitor freaks out and keeps flashing on long enough for me to input a password. Then it flashes off, the computer and dipslay goes to sleep and I have to re enter my password to exit sleep mode and the process starts all over again.
    Here are screen shots of the two monitors side by side:
    http://danisco.files.wordpress.com/2013/07/monitors.png
    (Notice the weird overlap - it's not keeping me from working, but it's super annoying!)
    Any ideas on how I can try and fix this? OR do I need to get help from Apple directly. Thank you in advance for any suggestions on this!

    Okay - this issue seems to have resolved on it's own. Yea!
    I did find a thread that suggested resetting the PRAM/NVRAM so I did this, restored the external monitor to factory settings and went into Disk Utility and repaired disk permissions and verified disk permissions.
    Here is a link to reset the PRAM/NVRAM: http://support.apple.com/kb/HT1379
    These things may have helped resolve this issue. I can't tell what worked because it was hours after I did all these things that my monitor and computer decided they liked each other again. If you have a similar issue, maybe these steps will help you resolve your problem too.
    Hope this is helpful!

Maybe you are looking for

  • Error while creating a callable object - User Interface

    Hello, When i'm trying to create a callable object - User Interface in the guided procedure design time. i'm getting an error. An internal server error. This is happening while i'm trying to create a guided procedure with webdynpro's. Is there any bo

  • Getting error while running application on linux

    Hello, I developed an application on windows and it works great on windows. Than I changed my OS to linux(ubuntu 64 bit) and I setup all the environment with following this article : http://docs.oracle.com/javafx/2.0/release_notes_linux/jfxpub-releas

  • Getting results from LDB (Logical Database)

    Hi All, I have a requirement where i need to pass LDB results to external application. It can be any LDB. Like in SE36 we put the LDB name and execute and final results are shown in ALV. I dont need it to display in ALV but from my custom program, ne

  • Live! Cam Video IM Pro drivers, GET EM HERE

    Tada, The Li've! Cam Video IM Pro drivers : http://d.turboupload.com/d/428788/english.zip.html nomorecreative sent me the drivers and i'm posting them for you all here. enjoy, and creative, seriously, not that hard.

  • Sync issue with Outlook 2010

    Hi, Not sure if this would be the correct place for this, but here is my issue We have a client with Exchange 2010, and Outlook 2010 and they seem to be getting sync issues. the error that comes up is 10:58:52 Synchronizer Version 14.0.6117 10:58:52