Everything is installed right, but no so
I currently own the Sound Blaster Audigy Ls, I installed it and everything. I have everything adjusted so that all my sounds paly on the sound card. I have my headphones connected to the green input and my microphone to my pink input. None of them work, I dont understand whats going on....
OK, another stupid & basic question, is your volume on? Look in the advanced options too (double click the volume icon on the task bar), and then make sure it is ALL unmuted, and all ALL the way up...
Yan
Similar Messages
-
My appletv is properly connected to wireless network, everything looks all right but it can't adjust the time and date. As a result it doesn't work.
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
My father in law decided to clean up my computer and accidently wiped off something important(dont know what).He then took it away and said he would get it fixed.When he brought it back he said that everything was back on but I needed to install itunes,Ive installed the latest version and the quicktime.
It seemed to have worked ok and all of my songs are there but when you try to play them, they just dont play.
Ive tried putting a cd in and that wont read or play.
Ive gone on to the itunes store and tried playing a song there,when I click on the play button the blue circle activates but just continues in a clockwise rotation but doesn't play.
I have a old ipod,my wife and I have iphone 5s and a ipad mini.
I am affraid to plug them back into my computer until I sort the problem out.(they had been plugged in before this happened and worked fine.
HELP PLEASE
Scott HodsonDo you memeber the complete wording of the error message?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My songs won't play on Windows 7 version of iTunes. Everything on my PC is up to date. Windows Media Player works fine. I followed the directions and nothing has changed. I have already tried to re-install iTunes but that hasn't worked either. If anyone knows how to solve this problem please E-Mail me at [email protected] or reply to this message.
Itunes worked after reseting my computer to factory setting however had trouble again after syncing my iPod and iPod shuffle. Is this a coincidence or could it be the cause of the problem?
-
i tunes will not update it says before i open itunes it wasent installed correctly but i dont want to lose everything i have how do i fix this?
It looks like you may have to reinstall itunes.
There are multiple things you should uninstall (and in a certain order) according to apple.
Also, even thought your music and itunes library information should not be affected in the uninstall, I would strongly recomend backing it up. Go to where you keep your music files and make sure you back up everything in the folders "itunes" and "itunes music".
The directions for the reinstall are here: http://support.apple.com/kb/HT1925 They include what to uninstall and in what order. This is for itunes 9 and earlier, but I think it is the same for itunes 10. -
Ok so I cant open my Itunes due to Windows Error 2 and the message says to uninstall and re-install Itunes but I'm pretty sure that would wipe the library right? Is there any way to fix the problem and keep my library?
Hi neffn!
I have an article for you that can help you go through that process of uninstalling and reinstalling iTunes. If you have Windows 7, you will want to see this article:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
and if you are using Windows XP, you will want to reference this article:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
Note that, as it says in those articles:
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
Getting same error message - 1st time ever having a problem witn iTunes. Tried to re-install iTunes but that just got another error message. Does this mean I have lost everything.
Have a look at the articles mentioned here:http://support.apple.com/kb/TS3694
Unknown Error containing "0xE" when restoring: To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information. -
Hello! I can't buy goods in ap store. Everything fill and everything right but it sent me to apple support.
Get in touch with Apple Support, as suggested.
-
I just updated my iphone4 to iOS5.1 and now I cant use my 3g, everything on my cellular data's right but I cant activate my 3g anymore, can you help me please? thank you! i really need it
Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data doing a reset.
If this does not work, set it up again as new device, without using the latest backup afterwards.
How to back up your data and set up as a new device -
I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?
See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
I downloaded and installed Creative Cloud Installer and installed the Creative Cloud desktop on my MacBook Pro running Yosemite. The Creative Cloud desktop tries to install when the system starts and the icon actually shows in the top bar briefly and then disappears shortly after it shows up so it is obviously failing to load. I have tried multiple times to no avail.
do you mean in my system library? or where can I find it?
Am 05.03.2015 um 23:55 schrieb Jeff A Wright <[email protected]>:
I have installed Creative Cloud Desktop but it fails to load. The icon shows up in the bar at the top right but then it just disappears. I am running Yosemite on a MacBook Pro.
created by Jeff A Wright <https://forums.adobe.com/people/JeffAWright> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7257828#7257828>
Vanb38462666 or Daniel do either of you have a Library/Input Managers folder? If so what do you have inside that folder?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7257828#7257828 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7257828#7257828
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Downloading, Installing, Setting Up by email <mailto:[email protected]software.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 71>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>. -
Have had to re-install everything on my computer but Photoshop elements 11 disk will not load. Help?
have had to re-install everything on my computer but Photoshop elements 11 disk will not load. Help?
you can download the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.< -
The problem I'm having with my Bible +1 App wasn't solved by resetting my iPad. I was told to then delete the App and re-install it, but if I do that, won't that delete EVERYTHING within the App, like all the highlighting and Notes? And I'm sorry to say, I'm extremely technologically inept - only had this iPad since mid-April and the first piece of computer ANYTHING in well over 15 years with my son - and we never had the InterNet. The reason I'm telling this is, I'm not even sure HOW to re-install an App. Sorry.
If the app continually fails to run the delete and renown load might help. But yes, you will lose everything that you have done with the app unless there is some way to back up the info to your computer or another device.
You might also contact the developer of the app to see if they are aware of the problem and are working on fixing it. The developer info can normally be found in the information on the app provided in the App Store. -
Hi, I cannot access my iTunes as it says Quicktime was not found. It advises me to un-install and then re-install iTunes but I am afraid I may loose everything as it hasnt been backed u since May 2012. I can access iTunes on my iPhone but the error message comes up when I try to access this on my desktop. Any advice? Thanks a mill
Uninstalling iTunes and reinstalling should not affect your library. You should backup anyway.
tt2 -
I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help
no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.
Maybe you are looking for
-
IDOC: How to create child segment with abap code.
Hi, I'am trying to write an abap code to create segments for an Idoc which structure is the following: ZLE_00060_DLVY > E1EDL20 > Z1DEL_CONS >Z1DEL_MAT_HEADER > Z1DEL_MAT > E1EDL20RET2 > E1EDL22 > E1EDL21 > E1EDL23 > E1EDL51 I receive a sintax error
-
Yesterday I received a new mac mini (actually, a refurbished one that was originally released in July, sold from Apple). It downloaded a bunch of stuff when I did the software update, including an EFI Firmware update for the mac mini. As far as I ca
-
Server 2.2 and AD Profile Manager issues
The Server 2.2 update lets you use AD users inside of AD groups (YAY!) My problm is after the update the web interface in Profile Manager will not list groups or users anymore, it slows down to a crawl and errors out. I also can't add "network user
-
Filter Mailbox database by size in Exchange 2007
How do I filter the mailbox database to determine mailbox size, i.e. users who are near their limit.
-
Has anybody noticed there is a huge bug in Oracle 9.2.0.1 ? SELECT STRS.Text, STRS.Language FROM CTY LEFT OUTER JOIN STRS ON (STRS.Language='de' AND CTY.LanguageId=STRS.Num) returns: 1 , 'Deutsch' , 'de' 2 , 'Deutsch' , 'de' BUT if the condition is r