Everything is read only?

i accidentally clicked the "check out" option on my site
folder while in dreamweaver and now all my files are read only. is
there a way to undo this?

ok so I found out it is my fstab entry, here is how I have it , this is a ntfs 2tb drive internal http://postimage.org/image/idgd21mfb/
how I found out this was the issue is, I commented it out, rebooted started x and it let me in, so this concluded its my addition to fstab now I just don't understand what I did wrong.
Last edited by fallen1011 (2013-01-21 22:30:27)

Similar Messages

Everything is read only after reboot?!

after installing arch and awesome it worked fine Ive done this before, however I have 4 harddrives 1 internal 3 external, I went to fstab and added the internal, did the uuid=numberwhatever, ntfs default 0 0 and it worked fine, but when I restarted I log in and try to do startx and this is what happened and I have no idea what to do.
what doesn't make sense is it worked fine without restarting and the drive let me read and write to it, also my swap is a 0 0 if that matters..i searched on the net and no one is having this issue so there are no helping leads anywhere ive seen
http://postimage.org/image/n6885q3ql/

ok so I found out it is my fstab entry, here is how I have it , this is a ntfs 2tb drive internal http://postimage.org/image/idgd21mfb/
how I found out this was the issue is, I commented it out, rebooted started x and it let me in, so this concluded its my addition to fstab now I just don't understand what I did wrong.
Last edited by fallen1011 (2013-01-21 22:30:27)

Import (Tbl Load) without LOG - Tbls read-only (error: -115 and -126)

Hi everybody,
I'm very new to this things, so I'am sorry for mistakes, but I see no other way, then bothering you with what makes me crazy, so I startet in distributing this help scream a little bit more than perhaps needed.
But I have a problem with my SAP DB 7.4 on Windows 2000 SP4, setting the permissions of tables, I loaded with the loadercli, what I cant't solve.
The data is okay, the application runs (as long as nobody is trying to update, delete or insert data), but I can`t find any option to set the permissions of the tables, neither in the DB Manager nor in the SQL Studio.
For better understanding what I have done:
I exported the 7.4 DB with the 7.6 loader from a desktop computer and imported it into my server-DB. The 7.4 loader was not able to do this, so I tricked it out the hard way by substituting it with the one packed to the newest MaxDB version.
Now everything is read-only, because I forgot (or more precise: I didn't expect this to be that really BIG problem) to export and import the LOG.
The desktop DB was cleared/killed/deleted after my application runs on the server. (I idiot didn't test to update/delete or insert data)
I gathered a lot of information via google and the SAP DB Library, but non helps me.
The Library only says:
-115: Table is read only
Explanation:
The attempt was made to perform an <INSERT>, <UPDATE> OR <DELETE statement>. But the specified table only allows reading SQL statements because it was previously loaded with the NOLOG option.
User Action:
The read-only mode can be implicitly cancelled saving data or pages using the database administration tool.
I understand, because I loaded no LOG, that there is no LOG.
And the resulting error of this I understand too, which is called: -126 Databackup missing (Backuphistory lost) (which is not descriped in the library)
But why is it not possible to start from this point, with a new log, and the old data? (that is consistent)
So I perhaps need to know 2 things to solve this (I think):
1. How can I reinitialize/recreate/reconfigure a LOG and the Backuphistory?
2. What do I need to do next to set the permissions back to R/W?
Sorry for that many questions and my unknowing, but I can't help myself anymore and my company must work with their application.
Any suggestions to solve this problem are welcome with high gratification!
Thank all of you taking time of this, in hope that there is anybody who can help me, I really need to get this running again.
Frank

Hi Alexander,
I did a complete Backup with the GUI, and you were fully right, it runs again!!! Thanks a lot for this tip. Till Friday I have had called me a professional programmer, but I feel like a newbie now, with a lot to learn about DB.
If the exists a link to deeper knowlegde about this behavior I will for sure start reading, is there any?
I offer in making an addition to the SAP 7.4 Documentation related to this. When I also know that perhaps nobody except me is using SAPDB 7.4. But again thanks for the help.
Greetings,
a new born db user

USB hard drive is set to read only?

I'm am very new to Mac (my first one). I plug my USB Seagate drive into the Mac and it reads it fine, but says everything is read only. How do i set it up to allow the Mac to modify the files? Does the hard drive have to be reformatted to a Mac OS and/or is it possible to use the same hard drive on the Mac and PC. I have windows XP Pro SP3 installed using VM Fusion as well.
I have done a lot of video editing Windows based and very rarely moved the files to my PC hard drive. I have to assume you can do the same with Mac, however I have been able to figure out how to do this in iMovie 2009.
Thanks in advance,

BRDVPRA,
Your external drive is undoubtedly formatted as NTFS. As you already know, your Mac can read this format, but it cannot write to it. There are some third-party shareware applications that will allow your Mac to write to the NTFS volume; search for these on versiontracker.com, if you want to give this a try.
The native Mac format is HFS+ (Mac OS Extended), which cannot be read natively by Windows. Again, there are third-party solutions for this (specifically, a Windows app called "MacDrive," also available on versiontracker.com).
The only format that will allow reading and writing from both OS X and Windows is the FAT-32 format (called MS-DOS in Disk Utility). This format is older, and less compatible with modern file formats. For example, it will not support files larger than 4 GBs.
The question that needs answering is whether or not you will using this drive cross-platform, or whether it will be dedicated solely to OS X. If the former, you'll need to use either the FAT-32 format or some third-party solution. If this drive will only be accessed from OS X in the future, you should copy the data, format it as HFS+ (Mac OS Extended), then return the data to it.
Scott

I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seem to be checked. Also the read only box is checked and when I uncheck it seems ok but it has not unchecked

I am unable to purchase anything because " I do not have the correct privelages".But when I check in properties and the security tab, everything seems to be checked.
Also the read only box is checked and when I uncheck it seems ok but if I check again it is still checked.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Read Only Display of Radio group and Text area with counter not working

Hello,
I am using Apex 3.2, with 10g for the database
I have this form, with fields that will set to read only when status = 'closed'
All of the fields display as read only except for 2. I cannot figure out why this is not working correctly.
1st field is Issues that is a text area with character counter, with a sql query behind it, that is set to null unless the query is pulling in the data.
2nd field is Status which is a radio group that will not display as read only when status = 'closed'
I have other fields on the form with the same format and they change to read only when the status = 'closed', I have even copied the pl/sql expression from one field to these fields and it still doesn't work correctly. I have also tried javascript for an on load event, which works, but once I click on the save button, it disables all of the page items, which works correctly, but I purposely forget to enter information, to make sure the validations are firing correctly, which it does, but the script disables everything, not allowing me to correct the errors. The javascript is firing on the on page load event.
Any help on this is greatly appreciated.
Mary

Dung,
That API seems to have a bug, it returns true/false/null, so you could use 'return not nvl(htmldb_util.current_user_in_group(p_group_name => 'APP Admin'),false)' to get a false value.
Unfortunately there's another problem: using the read-only attributes for checkbox or radiogroup item makes them hidden. My suggestion would be to create another item that has disabled="disabled" in the HTML Form Element attribute in the item definition and display that item or the non-disabled item alternately, using conditions based on the current_user_in_group logic.
Scott

Fields appear as "Read Only" in an Int.Form called from a WD

Hi Experts!
I am having a doubt in an Adobe Int.Form, that is called from a WD application.
The fields that are in my Form, always appear as a "read only". It is not possible to modify anything there.
Here, I describe the steps that I follow.
I create a very simple WD application. In its WD View, exist an unique Object (Adobe Interactive Form).
In that object, I set the properties:
"Data source": a context variable type "my structure". "My structure", is a simple structure with a couple or three fields, let´s say PERNR, BUKRS, WERKS... It is linked to the Form Interface (ABAP DICTIONARY-BASED INTERFACE). So in this way, the link between my WD and the AdobeInt.Form is working.
"PDF Source": a context variable type XSTRING.
"Template Source": here I have set my Int.Form. Currently, it only contains a couple of fields
"Enabled": True.
"Read Only": False.
In the AdobeForm, I have drag & droped those 2 or 3 fields, save it, and activate it. I guess nothing more is needed, for my test.
And at last, in the View´s method WDDOINIT, I am reading one of those fields, let´s say the employee number (PERNR), and I set by hardcoding its number (let´s say -> 00000001).
Until here, everything seems to work fine. When I launch the WD test, the Adobeform appears, at the moment, with only one of my fields (Employee - PERNR), and its value is filled in with '00000001'.
But now, I would like to write something by myself. And when I try to do it, it is not possible! Field PERNR, is displayed as a "READ ONLY".
Someone knows what is happening here? I guess it should be possible, to activate as a "EDITABLE" that field in my Form.
So here is my doubt.
Am I doing anything wrong? Or am I doing any mistake?
Thank you very much in advance!

Finally I think I have found the problem.
In the View where I am printing the ADOBEFORM, it is needed this code under the method WDDOMODIFYVIEW.
method WDDOMODIFYVIEW .
DATA: LV_INTERACTIVE_FORM   TYPE REF TO CL_WD_INTERACTIVE_FORM,
             LV_METHOD_HANDLER     TYPE REF TO IF_WD_IACTIVE_FORM_METHOD_HNDL.
LV_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'INT_FORM' ). "   adobeform object in view
IF LV_INTERACTIVE_FORM IS NOT INITIAL.
      LV_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
      LV_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( ABAP_TRUE ).
      LV_METHOD_HANDLER->SET_HIDE_NAVIGATION_PANEL( ABAP_TRUE ).
      LV_METHOD_HANDLER->SET_DISABLE_PRINT_BUTTON( ABAP_TRUE ).
      WD_THIS->M_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
      WD_THIS->M_METHOD_HANDLER->SET_HIDE_TOOLBARS( ABAP_TRUE ).
    ENDIF.
endmethod.
Regards,
Carles

Recently my keyboard on my macbook pro died. i backed up the machine to my Seagate 500GB hard drive, successfully, and sent the notebook in for repairs. Now that the macbook is repaired, i can read from the seagate, but not write to it. It says read only.

Recently my Macbook Pro's keyboard failed. Using my wireless keyboard, i managed to backup everything to my 500gb Seagate external hard drive. I sent the machine in, had the keyboard repaired, and now the machine is back, and i am loading my content back onto the macbook. My problem is that the drive is now read only, and i have searched for all the obvious fixes. The lock on the permissions secion of the info block on the drive. (not present). I have even tried disk utility, but all the options are greyed out.
I am a graphic designer, and so i use my external drive extensively to move artwork around, so it is important that i can make it writable. It worked perfectly on this very same machine, two weeks ago, and nothing has changed on the drive, so i can only assume it is a software issue on the operating system.
I have read through all the forums, etc, and can find nothing that works. I am loath to change anything on the drive, as it was working perfectly on this system before the system went in for its repair.
Any help would be greatly appreciated.
-Captain Zub-

Please post a screenshot of Disk Utility that shows what you mean. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Making Multiple Digital Signatures Read-only in Form (Acrobat 9)

I have created a form which includes two (2) digital signature fields. What needs to occur with the form is Person1 fills the form and then digitally signs it thereby making the form fields read-only . Person2 then digitally signs the form which should make Person1's digital signature read-only.
Here's what I've done:
1) For the Person1 digital signature field, in Digital Signature Properties, under the Signed tab, I have selected Mark as read-only <all fields except these> and selected the Person2 digital signature field.
2) For the Person2 digital signature field, in Digital Signature Properties, under the Signed tab, I have selected Mark as read-only <all fields> since once Person2 signs the form I do not want Person1 to be able to clear the digital signature and make changes to the form.
Here's what actually occurs:
Step 1 above works fine. Once the signature is applied all the form fields are read-only except for the Person2 digital signature field.
The problem is that after Person2 digitally signs the form, even though I selected all fields as read-only, Person1 can 'clear' their signature which leaves all the form fields available for editing and leaves Person2's digital signature still on the form.
I honestly don't care about 'validating' signatures on this form since it's going to be printed but I cannot allow Person2's signature to remain on the form and allow Person1 to edit the form.
--Mike.

Hi!
I have the same problem. Have not been able to figure it out, although tried everything.
Hope somebody can help
- MackeMan

CUCM 8.6.2 /common Partition on read-only mode

Hi Guys.
We have installed a CUCM 8.6.2 on a UCS C210 and everything was looking fine for the last two weeks.
I´ve noticed that "CDR Repository Manager" and "Cisco CAR DB" was not running, so I´ve accessed the CLI to start the "Cisco CAR DB" service.
For my surprise, after logging in, I received the following message:
============================
Command Line Interface is starting up, please wait ...
java.io.FileNotFoundException: /var/log/active/platform/log/cli.bin (Read-only file system)
        at java.io.RandomAccessFile.open(Native Method)
        at java.io.RandomAccessFile.<init>(RandomAccessFile.java:216)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.restoreIndex(ciscoRollingFileAppender.java:100)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.setFile(ciscoRollingFileAppender.java:43)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.java:196)
        at org.apache.log4j.config.PropertySetter.setProperty(PropertySetter.java:155)
        at org.apache.log4j.xml.DOMConfigurator.setParameter(DOMConfigurator.java:530)
        at org.apache.log4j.xml.DOMConfigurator.parseAppender(DOMConfigurator.java:182)
        at org.apache.log4j.xml.DOMConfigurator.findAppenderByName(DOMConfigurator.java:140)
        at org.apache.log4j.xml.DOMConfigurator.findAppenderByReference(DOMConfigurator.java:153)
        at org.apache.log4j.xml.DOMConfigurator.parseChildrenOfLoggerElement(DOMConfigurator.java:415)
        at org.apache.log4j.xml.DOMConfigurator.parseRoot(DOMConfigurator.java:384)
        at org.apache.log4j.xml.DOMConfigurator.parse(DOMConfigurator.java:783)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:666)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:616)
        at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:584)
        at org.apache.log4j.xml.DOMConfigurator.configure(DOMConfigurator.java:687)
        at sdMain.initialize(sdMain.java:479)
        at sdMain.main(sdMain.java:646)
java.lang.NullPointerException
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.updateIndex(ciscoRollingFileAppender.java:117)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.nextFileName(ciscoRollingFileAppender.java:92)
        at com.cisco.iptplatform.fappend.ciscoRollingFileAppender.append(ciscoRollingFileAppender.java:74)
        at org.apache.log4j.AppenderSkeleton.doAppend(AppenderSkeleton.java:221)
        at org.apache.log4j.helpers.AppenderAttachableImpl.appendLoopOnAppenders(AppenderAttachableImpl.java:57)
        at org.apache.log4j.Category.callAppenders(Category.java:187)
        at org.apache.log4j.Category.forcedLog(Category.java:372)
        at org.apache.log4j.Category.debug(Category.java:241)
        at com.cisco.iptplatform.cli.CliSettings.getInstance(CliSettings.java:112)
        at sdMain.initialize(sdMain.java:491)
        at sdMain.main(sdMain.java:646)
log4j:ERROR No output stream or file set for the appender named [CLI_LOG].
   Welcome to the Platform Command Line Interface
VMware Installation:
        1 vCPU: Intel(R) Xeon(R) CPU           E5649 @ 2.53GHz
        Disk 1: 80GB
        4096 Mbytes RAM
    WARNING:
        The /common file system is mounted read only.
        Please use Recovery Disk to check the file system using fsck.
============================
In past months, we´ve noticed this error on MCS7800 servers, nothing about UCS servers.
Here is the link for the correction on MCS:
https://supportforums.cisco.com/docs/DOC-12955
My doubt is how could be possible to have the same error on my CUCM virtual machine, since his Hard Drive is a vDisk?
Did you already have this same problem?
Any help would be appreciated.
Thanks!

Hi
You get this type of corruption if the VM is powered off rather than being shut down, or if power is lost to the host for example (or it crashes for whatever reason).
You just need to run the file check on the recovery CD, but at least you don't have to walk to the server to do it (you can just mount the ISO from vSphere).
Aaron

Problem with HTML in a read only textarea item

I'm working on a messaging system for our site. For the body of the message, we use a standard textarea item. However, if we come to the messaging page from a certain page in our system, then we pre-load the textarea item, and make it read only. The only problem with this is that there are HTML tags in the body that we try to pre-load. This is causing problems because they aren't being interpreted as tags, but are being displayed as text. If I make the textarea editable, then everything looks fine, it's just when I set the area to be read only that it doesn't work. Any thoughts on how to fix this? Thanks!

Not always. A user is allowed to edit that area in most circumstances except for when the user arrives at the page coming from 1 page in particular. In this case, then the field is read-only. At all other times though, it is editable.
As a workaround, whenever I know I'm coming from this page, I set a variable, and if the variable is set, then I use a Display Only item and then hide the Textarea. If the variable is not set, then I hide my Display Only item and show the Textarea. Not very elegant, but it works.

Should the Edit in Browser link appear when Office Web Apps is read only?

Hi,
We have deployed an Office Web Apps farm in read only mode for licensing reasons.
There is a binding between SharePoint 2013 and the Office Web Apps farm, everything is working well, except the option to Edit Office documents using Office Web Apps is quite prominent on the ECB menus and document previews.
Is anyone able to advise whether this is expected behaviour? When the link is clicked a friendly error message states that licensing doesn't support editing, which is correct. I'm just trying to see if the user experience can be improved by a setting that
we've missed somewhere along the line.
Thanks in advance.

Hi,
Per my knowledge, if you have configured Office Web Apps for SharePoint, the Edit in Browser option will appear in the ECB menu regardless of the licensing of the Office Web Apps.
So I recommend to use CSS code to hide the Edit in Browser option if you do not want the user to use it.
Edit the page of the document library view page, and then add a Content Editor web part to the page.
After that add the code below to the Content Editor web part:
<style>
a[Title="Edit in Browser"]{
display:none !important;
</style>
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

ALV: columns in read-only mode look like editable columns in edit mode

Hi,
My application contains an ALV table which should be toggled between display and edit mode like the rest of the fields.
The evident solution was to use
if_salv_wd_table_settings~set_read_only( abap_true or abap_false)
However, unlike the rest of the fields, when the application changes into display mode and the fields get grey like in any SAP application, the columns in the table which were editable remain white, and those which were not editable and thus grey, get now white, too, instead of the other way round. So it will look to the normal user, as if now all columns would be editable!
Of course, he would realize that they are not when he tries to edit them, but this is irritating.
See following link with screenshots (only active for 3 weeks from now on):
[Link to my webmail space/SDN: .|https://businesswebmail.telekom.at/filestorage/MzYxMTk1OTMx/]
I have looked
through my books ("Einstieg in Web Dynpro for ABAP", "Praxisbuch Webdynpro for ABAP", ...)
through the wiki for Webdynpro for ABAP here in SDN as well as through this forum (by searching with "ALV edit")
through the notes in BC-WD-CMP-ALV
but could not find any solution. Most tables in those PDF articles found here in the WD4A wiki also show white cells although they are probabliy in read-only mode (e.g. the imitation of the SE16N browser article).
The attributes to the LO_CELL_EDITOR for both Inputfields and textview columns contain exactly the same values when toggling between display and edit mode (read-only in table settings), so also no chance to change here anything.
Also changing the cell design is not a solution as there is no design that looks like grey for not editable according to WDUI_TABLE_CELL_DESIGN ([SAP Help - WDUI_TABLE_CELL_DESIGN|http://help.sap.com/saphelp_nw2004s/helpdata/en/56/5e9041d3c72e7be10000000a1550b0/frameset.htm].
I do not know if I have made an error, as this is my 3rd Web Dynpro (after the first 2 of the introduction book), or SAP is really inconsistent in User interface between "normal" fields and ALV table fields.
Can you please help me?
Thanks in advance,
Erlend

Hi,
In my application aslo, i have 30 columns out of which 10 are input fields. But, i'm showing the table as ABAP_TRUE incase of Non-editable otherwise to abap_false. Now i'm getting everything as in WHITE cells.
Do you want to show it is Grey mode with Non-editable feature. Is that so.
How many columns are there which has Input fields.
Get the column references.
Now, based on the mode of display create the object as Input or Textview field.
For that column -
If mode eq 'D'.
Create an object for Textview(cl_salv_wd_uie_text_view)
else.
Create an Object for Inputfield(cl_salv_wd_uie_input_field)
endif.
The Append row is a standard button or custom one on ALV toolbar.
Do you want to hide the toolbar or just disable these buttons.
If you want to hide the toolbar then refer my wiki -
http://wiki.sdn.sap.com/wiki/display/WDABAP/NullreferenceforUPDATETOOLBARerrorsofALVinthewebdynpro+ABAP
Regards,
Lekha.
Edited by: Lekha on Sep 30, 2009 8:06 PM

How do I change permissions from read only on my external hard drive?

I'm a new convert from PC to MAC and I'm kicking myself because it's been **** ever since.
My music and business documents are all kept on an external hard drive and that hard drive is NTSF.
My MacBook is reading the whole drive as read only. I'm trying to add my huge library to the cloud but it's not reading it all.
How can I convert the drive to FAT without losing everything. I have 91 gigs of music that as a dance teacher, cannot afford to lose.
Please help!

chombitafeya wrote:
If I'm only using Mac now, do I still follow #2 from above?
If you are going to use the external drive only with Macs now, you can consider the option to format the external drive with "Mac OS Extended (Journaled)". In this case, only Macs will read the external drive, but compatibility will be better.
chombitafeya wrote:
If I go out and buy an external hard drive that's Mac compatible, will I still be able to transfer the files from my NTSF drive to the new Mac compatible drive or do I have to use a pc to solve this problem?
First of all, note that all external drives are compatible with Macs. If you find external drives which come as "for Macs", that's because they come formatted in "Mac OS Extended (Journaled)".
In that case, you will be able to transfer the files from the NTFS drive. Note that you can read NTFS drives and you can copy files from the NTFS drive to your Mac or other disks. The only thing you can't do is copy files to the NTFS drive

Read only access to J2EE related tools

Hello,
I would like to help our auditors access everything they need to check in the Java systems, but I am not ready to give them ADMIN accounts. That`s why I need some kind of read only access for them.
So I would like to ask you if there is a SAP Note about the read only access roles for J2EE/ Java AS?
I am afraid there is no such note available, so can anybody share any experience with granting read only access to the Java system? I know how to grant access to the whole NWA, but what about the rest?
Examples:
- is there a way how to grant read only access only to the UME?
- is there a role for read only access to the portal PCD?
- is there something similar for KM access?
Or has anybody ever tried to split the admin roles into smaller pieces? Is there a description/ document how to do such thing?
Thank you for your time and effort,
cheers Otto

Hi,
thanks for trying, but I can use help.sap.com and was on that page before.
Maybe if there were any examples there or better: if the whole thing would be more granular (I see no point in using roles starting with SUPER, containing ADMIN or ending with ALL). I am looking for roles for surgery or for auditing. I don`t want to give anybody these super/admin/all roles just like that.
If you can suggest how to use that page, that would be cool. Otherwise I see no use.
By the way: another question of mine about surgery: How to restrict access to download/ upload UME configuration file
I would like to know how to controla access to this specific feature, nothing else.
Thanks for the time and effort,
cheers Otto

Everything is read only?

Similar Messages

Maybe you are looking for