Everything is said in KM and backwards!
So this started just the other day. It doesn't matter if I put the settings on Miles of Kilometers that female voice will ALWAYS say where I'm at in KM. Secondly, when I put in a distance under Miles it will take the miles and turn them into kilometers. So let's say I want to do a 3 mile run I put that in under distance. Then instead of keeping my distance run in 3 miles it turns it into 3 km. Then sorta vice versa if I put the distance in Kilometers. I put 5km run which is like 3 miles. It then puts my distance at 3 km!
It keeps track of my actual distance correctly because I ran what I know is 3 miles and it does it just fine, but I cant put in proper distance so my run say it's over before it actually is. I just keep running the right distance and keeps track of it correctly. And on top of it all it keeps saying it in KM.
Also Paula always comes on at the end unless Lance comes on and tells me I just completed 500 km. Grrr.
So I got a response from Nike:
Hey --------,
Welcome to Nike+. It’s great to see that you went out and picked up the Nike+ Sports Kit. You are going to love the online Run Log and Challenges. The 3G iPod nano has been experiencing issues with workout data feedback being different from voice to on-screen display. When there is a discrepancy in feedback you should know that the spoken feedback is correct, and that your run data will be accurately recorded on Nikeplus.com.
Apple has fixed this glitch through the newest software update available in Apple iTunes. Also be sure to check out the Goal Setting and Group Challenge features available on Nikeplus.com to stay motivated and don’t hesitate to respond to this e-mail with any further questions.
Keep logging those miles.
Ryan,
Nike+ Specialist
I have a feeling this won't help because I'm usually 100% up to date, but who knows.
Similar Messages
-
I have the Iphone 3gs and it said update required and i needed to connect to itunes so i did al that and now everytime i go to restore everything it just says error and then i have to do it again?whats wrong with it?
Are you getting an error message number with your error message? If so, what number are you getting?
-
I am a windows XP user and I recently upgraded to itunes 10 and everything on my computer slowed to a snail pace. Any other problems out there
like this?? I did everything that D528 said to do and still runs very slow.. Please help. How can I go to an older vertion of itunes.. It worked before???I am a windows XP user and I recently upgraded to itunes 10 and everything on my computer slowed to a snail pace. Any other problems out there
like this?? I did everything that D528 said to do and still runs very slow.. Please help. How can I go to an older vertion of itunes.. It worked before??? -
i had a message that said i was missing msvcr80.dll and i did everything it said to and now it says i am missing apple application support error 2. how do i fix this
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws
This sounds like a hardware issue. I haven't seen this particular problem reported before.
-
My Iphone 3GS has just restored and I completed the things on the Iphone and then it says no sim card activated and I tried everything it said if it does not work, but nothing seems to work?
All iPhones require a SIM for activation.
Insert a SIM in the iPhone. -
My iPad 2 doesn't have the app store I have looked in everything, reset the home screen and the restrictions is off but I still can't find it.
If you got the iPad from your school, and the Installing Apps restriction is 'off' but greyed out (as you 've said here https://discussions.apple.com/message/16137325#16137325) so that the App Store app is hidden, then it's likely that your school has set the restriction - you will need to ask them to remove the restriction for you.
-
BRE Forward Chaining and Backward Chaining
Hello Experts,
Can you please help me in understanding what is forward and backward chaining in BRE
ThanksForward chaining:
Following is the extract from my favourite BizTalk book - Professional
BizTalk Server 2006. I would recomment you to read though this book on forward chaining with BRE.
In short: Forward chaining describes the ability for one rule’s actions to impact facts relied on by another rule and thus require such a rule to be reevaluated to maintain consistency.
Forward chaining describes the ability for one rule’s actions to impact facts relied on by another rule and thus require such a rule to be reevaluated to maintain consistency.
Consider this three-rule scenario: Rules 1 and 2 rely on the Loan Risk property to establish which APR the loan should be set to. Rule 3 marks the customer as High Risk if the customer meets the profiling criteria.
Rule 1: IF Customer.LoanRisk = “Low” THEN Loan.APR = 0%
Rule 2: IF Customer.LoanRisk = “High” THEN Loan.APR = 39%
Rule 3: IF Customer.Age < 21 AND Income < “20,000” THEN Customer.LoanRisk = “High”
A clear dependency exists between these rules. The action of Rule 1 or Rule 2 can be made invalid by Rule 3. The action of Rule 3 modifies the LoanRisk fact, which is used as part of the conditions for Rule 1 and Rule 2.
This is where forward chaining comes in. The BRE requires that users create rules with this mind and add an UPDATE statement to the rule. This indicates to the BRE that the fact specified with the UPDATE statement has changed and that all rules that rely
on this fact in a condition should be reevaluated and therefore pass through the match–conflict resolution–action stages again.
The previous rule statement would need to be modified as follows.
Rule 1: IF Customer.LoanRisk = “Low” THEN Loan.APR = 0%
Rule 2: IF Customer.LoanRisk = “High” THEN Loan.APR = 39%
Rule 3: IF Customer.Age < 21 AND Income < “20,000” THEN Customer.LoanRisk = “High”
UPDATE Customer
Here Forward chaining describes the ability for one rule’s actions (Rule3's action) to impact facts relied on by another rule( Rule1 and Rule2) and thus require such a rule to be reevaluated to maintain consistency.
Backward chaining
Regarding
Backward chaining, I don't know anyone who has implemented backward chaining other than Charles Young. In case of Microsoft's BRE with backward chaining, his blogpost on this topic is the only reference. So its better I refer to his one and only blog on this
topic (in Microsoft BRE engine)
Charles Young's excellent blog on this: MS BRE Backward Chaining - Part 2: The 'Simple Name' pattern
Other references for you on this topic..
Technet Wiki:Biztalk: BRE Forward Chaining
A
real time use case addressed in MSDN forum
As said from my favourite - excellent detail provided on this topic with an in book Professional
BizTalk Server 2006 with an example
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.
1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2 -
Is there a way to transfer everything off one ipod, including and especially playlists, to another?
Is there a way to transfer everything off one ipod, including and especially playlists, to another?
See Recover your iTunes library from your iPod or iOS device.
tt2 -
I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back. Now everything is in the cloud, and I can't play them and cannot make a cd. Please explain how I can get my library out of the cloud and keep them on my computer so they are available when I want them? Wow.......why have you made everything so difficult now?
SKF5656 wrote:
I just purchased a new laptop, so consequently had to buy Itunes Match to get all of my music back.
No you didn't.
Now everything is in the cloud
Except for anything you did not purchase in iTunes Store.
Only you iTunes purchases are in the cloud.
Reada the article that brenden dv posted to copy your iTunes library to new computer. -
Lost home PC with my iTunes account on it in a small home fire. How can I take everything from my iPhone 4 and put it on my new PC? Is this even possible? iPhone 4 / new PC running Win XP Pro. I have backed up to iCloud recently so the info is out there, just need to bring it down onto my PC....
Need HELP.............Copy from iPod to computer
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
The sync to iPhone
iTunes: Syncing media content to iOS devices and iPod -
Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11?
Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11? Most editing apps--like Final Cut Pro, QuickTime Pro, Avid, etc.--use this convention. I find not having it slows editing down considerably? I don't see it listed in keyboard shortcuts; is there any way to add it? Thanks!
I don't think so. If you click iMovie/Help, you will see a list of all keyboard shortcuts.
Here they are.
Get information
Open iMovie Help
Command-Shift-Question Mark (?)
Open the Project Properties window
Command-J
Open the Project Theme window
Command-Shift-J
Show playhead info
Shows date, time, and keywords for video frames above the playhead.
Command-Y
Import and export
Import from camera
Command-I
Export movie
Command-E
Play video
Play video beginning from the frame beneath the pointer
Space bar
Play 1 second of video total—0.5 seconds before the pointer and 0.5 seconds after
Plays only 0.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Left Bracket ([)
Play three seconds of video total—1.5 seconds before the pointer and 1.5 seconds after
Plays only 1.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Right Bracket (])
Play selection
Slash (/)
Play selected event or project from the beginning
Backslash (\)
In the Event browser, speed up playback from 1x to 2x to 4x by pressing the key one time or two times, respectively
Right Arrow key
In the Event browser, slow down playback from 4x to 2x to 1x by pressing the key one time or two times, respectively
This action works only if you’ve already sped up the playback.
Left Arrow key
When playing Event video, jump forward 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Down Arrow key
When playing Event video, jump back 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Up Arrow key
When playing Event video, jump forward to the next clip
Down Arrow key
When playing Event video, jump to the beginning of the current clip, or jump to the previous clip if the playhead is near the beginning of the current clip
Up Arrow key
Play the selected Event or project full screen
Command-G
Exit full-screen mode
Escape (Esc) key
Move the playhead by one frame
Left Arrow key or Right Arrow key
Freeze the playhead
Hold down Control key
When skimming, keep the cursor in the middle of the row
Option-Shift
Manage projects and events
Create new project
Command-N
Move to Trash
Moves the selected project (in the Project Library), Event (in the Event Library), or Event clip (in the Event browser) to the Trash. If only part of an Event clip is selected, the entire clip is moved to the Trash.
Command-Delete key
Open iMovie preferences
Command-Comma (,)
Page setup
Command-Shift-P
Print selected Event or project filmstrips
Command-P
Select and edit video
Select an entire project or Event clip when a partial clip is selected, or select all project or Event clips when an entire clip is selected
Command-A
Select to playhead
Expands or contracts the selection from the nearest selection border to the playhead.
Shift-A
Deselect all clips
Command-Shift-A
Add selected frames to project
E
Split a clip on both ends of a selection (longer than five frames), or at the playhead position if nothing is selected
Command-Shift-S
Cut selected frames
Command-X
Copy selected frames
Command-C
Paste selected frames
Command-V
Paste all adjustments
Command-Shift-V
Paste video adjustments
Command-Option-I
Paste audio adjustments
Command-Option-A
Paste crop adjustments
Command-Option-R
Paste cutaway, green-screen, or picture-in-picture adjustments
Pastes adjustments, depending on which type of video is selected.
Command-Option-U
Paste video effect -
I'm looking for a music player that can skip forward and backwards a few seconds?
I'm looking for a music player app that can skip forward and backwards a few seconds?
MPD rocks, runs here for months without major problems.
The client side is very flexible, you can choose many players:
http://www.musicpd.org/clients.shtml
For X, for console, etc..
Edit:
MPD supports Icecast also, to create streams.
Last edited by mephisto (2007-05-15 14:00:36) -
i was mid facetime call and my phone turned off and wouldnt turn on until i plugged it in. then the date was wrong,it said no service, and wont let me turn wifi on. also it wont stay on for more than a few minutes at a time. Help?
Sounds like a hardware failure.
Make an appointment at the genius bar and take it in for them to look at. It will probably need to be replaced.
Maybe you are looking for
-
Need help ASAP!
-
RFC Call not returning in normal exec;retunrs in debugger
Hi all i m sorry for posting it twice,due to my ignorance i first posted it in wrong forum i had a requirement to invoke a RFC Async and recieve the results in my program with a condition that the name and parameters of RFC are determined runtime. To
-
Changing Default user Preferences in Workspace
I am using HFM 9.3.1. Each time I set up a new user I have to get them to log in, and go through the following routine.. Go to File>Preferences. Then Select Financial Reporting on the left side of the preferences window. Under the Preview heading on
-
hi all , i have installed 10.2.0.2 databases and configure dataguard. everything works fine but i have 1 problem. imagine that server 1 is primary ; when i check on server 1 ; (primary DB) SQL> archive log list; Database log mode Archive Mode Automat
-
The section "About Application Classloaders" of the documentation for WebLogic Server 6.1 has the following: When WebLogic Server deploys an application, it creates two new classloaders: one for EJBs and one for Web applications. The EJB classloader