Everything seems to be going wrong...

OK: Here's what's up:
I've owned my iPod 5-gen for about a year now, no problem, works just fine. This was until I started to have this pesky problem in which purchased songs wouldn't play, they'd just be skipped through. There's a helpful forum on it which presents some solutions. However, before I could do that, I decided to restore it, as I was prompted to do so on the computer. I did, and afterwards went in and resynced it and all seemed fine. I got my collection of 2,000 to "update". However, when I turned the iPod on, only one song was on it. Now, I have tried restoring it again and again, but to no avail. Now when I turn it on, it displays the iPod with the sad face, and thenturns to the screen which apparently means it doesn't have enough charge to be recognized by the computer. I've charged it for about 6 hours, yet still, nothing. I would send it in for service, but I can't turn it on to see the serail number (which is required for service). Please help!!
compaq presario- pentium 4 Windows XP 5th gen. iPod

You cannot have had the 5th Gen for a year, it sounds like you've got a 4th gen. The latest iPods only came out in october/november (?) i think anyway.

Similar Messages

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

TS2776 Im syncing new iphone4S to my Dell with Windows 2007 and everything seemed to be going fine however syncing won't finish...just keeps saying "sync is finishing"......help!

Im syncing new iphone 4S to my Dell with Windows 2007 and everything seemed to be going fine however syncing WON'T FINISH...just keeps saying "sync is finishing"......help!

Try:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Also I would remove and reinstall all the Apple software by:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

I purchased an Ipod touch and the instuctions told me to go to Itunes download and everything seemed to be going fine until the message came up that a program that itunes needs to run is being used. I have never had I tunes on this computer.

I purchased an Ipod touch and when I tried to download 10.5, it stop loading and gave an error message, A program it needs to run is being used by another program. What will fix this problem. I am running Vista and this is my first time trying to download ITunes. The only Apple device that has been connected is my wife's I Phone 3G.

See:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
If you have Snow Leopard do not forget the Additional Information paragraph.

I have problems updating my iphone 4 to ios 7.0.6. Everything seems ok, it is downloading, installing and restarting but it is still ios 7.0.4 on the phone. No error messages, everything seems ok. What is wrong?

I have problems updating my iphone 4 to ios 7.0.6. Everything seems ok, it is downloading, installing and restarting but it is still ios 7.0.4 on the phone. No error messages, everything seems ok. What is wrong?

I've never seen this. Try updating via iTunes on your computer. Plug it in and see if iTunes says it needs updating.
It worked via iTunes
Thank you

When i import from my vidio camera into imovie the clips look tall and thin.tied different imports like full size or large but seem to make no difference everything seems to run ok including sound whats going on? the m

when i import from my video camera into imovie the clips look tall and thin. tried different imports like full size or large have imported both sd and hd but seem to make no difference everything seems to run ok including sound. whats going on?

Hi Brad,
when you use Streamclip to convert media, use the same name for the exported file (only with different extension). Then make a shell script calling
touch -r origFileName.mp2 newFileName.mov
This will copy the exact time and date from origFileName.mp2 to newFileName.mov
The script may look like this (save the file, give an exec permission to it and call it in the right directory):
#!/bin/bash
for i in `ls *.mp2`; do
NEWNAME=$(ls "$i" | sed -e 's/mp2/mov/')
touch -r $i $NEWNAME
done
You may need to adapt the extension names used (in the example above .mp2 is input file to get the date/time stamp from and .mov is the output file to stamp.
Have fun and cheers

I try to use the brush tool and paint white but the only color working is grey! I got a warning message about graphics hardware, but everything seems to be fine with the graphics. What is wrong?

I get this message...but everything seems to be fine with the graphics hardware....help!?

The message is referring to 3D features which are not supported by cards with less than 512 MB of vRam.
Try Restore Preferences:
Windows - CTRL-SHIFT-ALT immediately after you double-click the PS icon.
Macintosh - CMD-SHIFT-OPTION immediately after you double-click the PS icon.
Nancy O.

My iPhone 5 is blocked and goes wrong with IOS 8.2.

My iPhone 5 is blocked and goes wrong with IOS 8.2. How can officially return to IOS 7.12?
The phone goes slow, hard contacts are loaded, the phone got stuck a few times.
I would like to return to the IOS 7.12, but can not. Problems have occurred since the IOS8, but I hoped to solve with iOS 8.1 or 8.2. On the contrary, the situation was worsened.
What can I do?

I have a 64GB model
Contacts are displayed harder. Not appear depending on usage, as IOS 7.
All functions of the smartphone go late.
Now I installed iOS 8.1 and did not improve anything
It happens rarely that's right, the smartphone to block everything and need to restart. But we claim that we have an Apple that should function without resets
I understand that the processor does not support well IOS8 iPhone 5, but I want to return to IOS 7 as the smartphone was perfect
Apple must know these problems and have to accept a return to IOS7 for iPhone 5
They were given a warning only 3, 3 g, 4, 4s
I have friends with iPhone 5 that meet the same problem and they will return to IOS7 if possible
I think that Apple has a problem in this regard
Another version of IOS 8 can not resolve the situation, because it seems that the processor can not handle this software
I would be very happy if Apple will understand the situation, and someone at Apple will give me an answer or a solution

Upgrading to iPhoto '08 - what's going wrong with my iphoto Library

Hi,
I would appreciate your advice/knowledge on this problem.
==> Short Description of my problem:
I can't recover the keywords associated with my pictures. I am asked to import my pictures although I choose to open my previous iPhoto Library after converting to iPhoto 08.
==> What I did:
1. I recently upgraded my mac to Leopard, and then to iPhoto'08. When opening for the 1st time iPhoto '08, I selected my iPhoto Library (as I held the option key while opening iPhoto).
2. I then get the message: “The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process may take several minutes depending on the number of photos in the library.” I clicked on the "Upgrade" button
3. My Mac then loaded/created ALL my previous albums and smart albums (including the most recent ones). It loaded pictures up to April 2005. BUT then, it prompted me with the following message : "5584 photos have been found in the iPhoto Library that are not a part of this photo library. Would you like to import them?". I was surprised to get this message, as I read that the upgrade should run smoothly.
4. I made two tests, following this prompt. First, I answered "YES". I ended with a 24.5 GB iPhoto Library (instead of my previous 12.64 GB library). Then, while repeating steps 2&3, I answered No. I then decided to import manually my missing pictures, and ended up with a 14,4 GB (surprisingly, I got events called originals that contained same pictures than other created events). I have repeated the steps 2 to 4 from a new user account, but got the same results.
5. None of these solutions are satisfactory as I had assigned keywords to my 5000+ photo. What is going wrong? Here is the content of my iPhoto Library (before conversion), if this is of any help:
In my iPhoto Library Oct 23, 2007:
folder 2000 Oct 18, 2007
folder 2004 Feb 13, 2005
folder 2005 Jan 29, 2006
folder 2006 Jan 7, 2007
folder 2007 Oct 23, 2007
AlbumData.xml Apr 17, 2005
folder Album Nov 11, 2007
Dir.data Apr 9, 2005
iPod Photo cache Nov 11, 2006
iPhoto.db Apr 17, 2005
Library.iPhoto Apr 9, 2005
Thumb32.data Apr 9, 2005
Thumb64.data Apr 9, 2005
ThumbJPG Apr 9, 2005
This library is an external-drive backup copy of my HD photo library (that no longer exists).
==> What to do next?
1. How to check if my keywords information is still present in my original iPhoto library? Is there any solution to get back my photo with their keywords?
2. Manage my iPhoto library with a smaller quantity of pictures, to ease backup and conversion. I have understood that iPhoto Libray Manager is a convenient free software to merge/de-merge libraries. Is that correct?
Thanks for your help,
Nicolas

NicoSou
This sounds to me like your v5 library is corrupted.
Try using the rebuild command from iPhoto Library Manager to recreate the library - it won't get everything, but should get albums and keywords. Read the iPhoto Library Manager Help for more details.
Regards
TD

Hi, I've an iPad Mini with the latest version 6.0.2, a windows 7 Home Premium laptop and iTunes 11.0.1 (12), but I can't synchronize my music or videos with it. I managed to syncronize my books but thats all I also have an iphone 5 and everything seems t

Hi, I've an iPad Mini with the latest version 6.0.2, a windows 7 Home Premium laptop and iTunes 11.0.1 (12), but I can't synchronize my music or videos with it. I managed to syncronize my books but thats all.
I also have an iphone 5 and everything seems to work fine with it.
I see all movies and music available to be sync but when I click on the sync button, the process starts, the bottom bar shows an increase in consumed space then nothing happens and the bar goes back as nothing was added.
Please help..
I have tried everything but nothing works.

Thanks Sk8dreams,
....but I wish I could have lol like u right now..
If I could get a free iPad everything I'd already kept my iPad connected and restarted iTunes, I think I'd have had a truckload of them by now...
I've done all of these..
Like I said earlier I syncd everything to my iphone5 successfully...
I got my PDF ebooks to this same iPad... Films & Music do not seem to be getting through..
I'm sure someone out there knows what to do..

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found

I have a new hard drive as my old one crashed. Everything seemed to transfer fine except for my entire iTunes library. It shows all of my old songs, but when I click on one it states "the song could not be used as the original file could not be found.would you like to locate it".
Either how do I locate it, and I've tried every trick I know, or how do I restore all of my songs from one of two sources. I have my old hard drive backedup on an external drive which should have all of my songs, and I have most of my songs on my old iPhone 3S which I'm using as a backup iPod.

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, one of its parent folders, or the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place. In the case of a library moved from one system to another there are also potential permissions issues. See Repair security permissions for iTunes for Windows.
Select a track with an exclamation mark, use Ctrl-I to Get Info, then click No when asked to try to locate the track. (Due to a bug in iTunes 12 you currently have to say No twice!) Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, a folder renamed, or a drive letter has changed, it should be possible to reverse the actions. If the difference between the two paths is an additional Music folder in one path then this is a layout issue. I can explain further if that is the case.
In some cases iTunes may be able to repair itself if you go through the same steps with Get Info but this time click Locate and browse to the lost track. It may then offer to attempt to automatically fix other broken links.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
See also Recover your iTunes library from your iPod or iOS device.
tt2

Out-of-place upgrade going wrong

Trying to work through an upgrade from 11.2.0.1 to 11.2.0.3 on a dev box, prefereably without major downtime, 64-bit Linux. Since I cannot shutdown existing listeners or database, the approach is perhaps a bit non-standard
<li>I've got the 11.2.0.3 software unzipped</li>
<li>I've created directories for a new ORACLE_BASE</li>
<li>I've exported ORACLE_BASE=/new/directory/structure</li>
<li>I've then launched database/runInstaller from the unzipped location and performed a painless software-only installation</li>
I'm now slightly confused about the next bit, bearing in mind I'm trying to do this without any downtime on the existing 11.2.0.1 database.
What I'd like to do is to get a copy of the existing database opened and running from the 11.2.0.3 home, whilst the existing 11.2.0.1 db continues on as it is.
<li>So I've set a new ORACLE_SID</li>
<li>I've copied across the orapw and init.ora from the old O_H to the new, renaming them appropriately</li>
<li>I've edited the init.ora so that path-specific parameters all now take the new O_H directory structure</li>
<li>I've then put the entire existing database into hot backup mode and copied it to the new O_H structure</li>
Because so little is being done on the original database I appear to have got away with copying online redo logs, because I was able to startup mount; issue lots of 'alter database rename file...' commands so the new file locations are picked up; recover database; alter database open upgrade.
What I am now struggling with is how to actually upgrade the freshly-opened new database. If I run dbua, it says 'database isn't mounted', whether the new db copy is in mount or open upgrade mode. If I run @catupgrd.sql, it seems to complete without a problem, leaving STATUS of V$INSTANCE at OPEN MIGRATE. But when I run the @utlu112s.sql command, I get this:
Oracle Database 11.2 Post-Upgrade Status Tool           01-23-2013 6:45:00
Component                               Current      Version     Elapsed Time
Name                                    Status       Number      HH:MM:SS
Oracle Server
Upgrade Incomplete
PL/SQL procedure successfully completed.If I push on and run @catuppst.sql, I get this (I've abbreviated as much as I can):
SQL> @catuppst.sql
TIMESTAMP
COMP_TIMESTAMP POSTUP_BGN 2013-01-23 6:48:41
PL/SQL procedure successfully completed.
This script will migrate the Baseline data on a pre-11g database
to the 11g database.
begin
ERROR at line 1:
ORA-04063: package body "SYS.DBMS_SWRF_INTERNAL" has errors
ORA-06508: PL/SQL: could not find program unit being called:
"SYS.DBMS_SWRF_INTERNAL"
ORA-06512: at line 2
(null) rows created.
DECLARE
ERROR at line 1:
ORA-04063: package body "SYS.DBMS_REGISTRY" has errors
ORA-06508: PL/SQL: could not find program unit being called:
"SYS.DBMS_REGISTRY"
ORA-06512: at line 4
SP2-1506: START, @ or @@ command has no arguments
TIMESTAMP
COMP_TIMESTAMP POSTUP_END 2013-01-23 6:48:46
PL/SQL procedure successfully completed.
BEGIN
ERROR at line 1:
ORA-04063: package body "SYS.DBMS_REGISTRY" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SYS.DBMS_REGISTRY"
ORA-06512: at line 2
          IF CatbundleCreateDir(:catbundleLogDir) = 0 THEN
ERROR at line 71:
ORA-06550: line 71, column 14:
PLS-00201: identifier 'CATBUNDLECREATEDIR' must be declared
ORA-06550: line 71, column 11:
PL/SQL: Statement ignored Not only can't I query dba_registry, opatch lsinventory shows nothing (because it's a fresh install of 11.2.0.3).
Any suggestions of where I am going wrong, please?
(I am following http://docs.oracle.com/cd/E11882_01/server.112/e23633/upgrade.htm#i1011372 and have checked Upgrade from 10203 to 10204 among others)

I think that (partially, as it turns out) de-installing unlicensed components on the original database may have caused this problem.
I tried doing a data pump export of the original database, and it failed with an error I tracked down in Metalink (I'm sorry, I didn't record the specifics). Turned out there were four tables left behind from OWB and a broken package related to Spatial. I dropped those, and the export worked.
But instead of using that export, I tried my hot copy technique again.. and this time it worked.
So I guess the moral of the story is to ensure your source database is 100% functional before you try messing around with any of this stuff.
Edited by: Catfive Lander on Jan 24, 2013 10:01 PM
Have remembered one of the specifics: Metalink 1328829.1 (OLAP removal leaves behind DBMS_CUBE_EXP in an invalid state). There was one other similar issue, but I still don't remember the details on that.

Hi i recently bought a used iphone 4 on orange in the uk and although everything seems to be working fine it will not send or receive calls and texts or connect to the internet, its like its been blocked, i have spent time resseting it with apple

i recently purchaced a used iphone4 on orange in the uk and although everything seems to work it will not send or recieve calls and texts or connect to internet,i have spent time resetting it through itunes myself and with an apple technician, iv done all the usual reset network and stuff and the sim works in my other phone. its like the phone has been blocked but it hasnt as iv done all the checks to see if it was stolen or blacklisted.please if anyone can help id b very grateful

i bought the phone from someone who lives in my village, there is no error code, when apple did a diagnostic on the phone they said it was running perfect. when you say carrier locked what exactly do you mean as i put a brand new orange sim in the phone and everything seems fine but the sim dosnt seem to activate so i tried it in my unlocked 4s and i got missed calls and txt's that id sent to it while it was in the 4, when i try ring it in the 4 it says sorry calls are currently not being connected to this number then goes to orange answerphone

What is going wrong with this config ??

Hello guys,
I am busting my head to find out what is going wrong with this config and cant figure it out since i am not an advanced cisco technician.
Problem is that i cant access the 94.70.142.127 server that is supposed to be in a DMZ zone.
I know it is a bit chaotic but would really appreciate any help since i am running on a deadline.
I am building the config step by step and although it seems to be working access to the server all of the sudden is denied.
No idea if its a NAT issue a firewall issue or a security audit issue.
There are 3 vlans.
Vlan 1 is the inside network.
Vlan 2 is the DMZ server
Vlan 3 is the Management Network.
thanks in advance
Building configuration...
Current configuration : 11796 bytes
! Last configuration change at 11:28:33 PCTime Fri Jan 4 2013 by admin
! NVRAM config last updated at 11:27:51 PCTime Fri Jan 4 2013 by admin
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime
service password-encryption
service sequence-numbers
hostname R1
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 8
logging message-counter syslog
logging buffered 4096 informational
enable secret 5 $1$oT7y$BwhdEjMJfAaTQI3dzDVwP.
no aaa new-model
memory-size iomem 10
clock timezone PCTime 2
clock summer-time PCTime date Mar 30 2003 3:00 Oct 26 2003 4:00
crypto pki trustpoint TP-self-signed-2567543707
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2567543707
revocation-check none
rsakeypair TP-self-signed-2567543707
crypto pki certificate chain TP-self-signed-2567543707
certificate self-signed 01
30820244 308201AD A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32353637 35343337 3037301E 170D3133 30313032 30383431
35335A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 35363735
34333730 3730819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100ABA4 B7FFF4F1 9FBE79D8 2CEBCA68 A14BE3AB DBF770C2 EB35A954 B271AE3E
F8485837 F2E8566B 66E5EF6B BCFCDFA3 8F6F91F3 FD8E3015 879A67F5 85DD95F5
C26875C0 2202CA6C CE95888F 545AB4F6 6F708A0E C65E78D1 60967480 5589F5EE
80505E46 8767CE2C 37C994FE AB555AF0 BA4C4679 63FF7641 34FFF6EF 3EC38006
46B90203 010001A3 6C306A30 0F060355 1D130101 FF040530 030101FF 30170603
551D1104 10300E82 0C52312E 646F636E 65742E67 72301F06 03551D23 04183016
8014F0DE 85318FB3 70C36B4A FEB4B0CA 446025F0 329C301D 0603551D 0E041604
14F0DE85 318FB370 C36B4AFE B4B0CA44 6025F032 9C300D06 092A8648 86F70D01
01040500 03818100 5D76D5F4 5FB659C3 1E5B3777 420E1703 CD019889 AE79390D
A2AA4D26 AD9913B4 B3292277 97ACACDD D7093465 78279B4D 5FAC0A21 EFBF3B74
6A25BC5B ACFB648F 08F92678 00BB495C 037DEAF7 C5910944 3D2C0643 EA19E9BD
0AFE5423 AADBB3C2 B2C94296 DABE0D3D 6438F7A8 32B0A92B 3E8E0D26 635070A3
ACF87E49 65A9E468
quit
no ip source-route
ip cef
no ip bootp server
ip domain name docnet.gr
ip name-server 195.170.0.1
no ipv6 cef
username admin privilege 15 view root secret 5 $1$Lny5$et1FhWOpIKOOYRUtN89H10
archive
log config
hidekeys
ip tcp synwait-time 10
ip ssh version 2
class-map type inspect match-any WebService
match protocol http
match protocol https
class-map type inspect match-all sdm-cls-sdm-pol-NATOutsideToInside-1-1
match class-map WebService
match access-group name WebServer
class-map type inspect match-all ccp-cls-sdm-pol-NATOutsideToInside-1-1
match access-group name Spoofing
class-map type inspect match-any CCP-Voice-permit
match protocol h323
match protocol skinny
match protocol sip
class-map type inspect match-any tcp-udp
match protocol http
match protocol https
match protocol dns
match protocol icmp
class-map type inspect match-all ccp-cls--3
match access-group name mng-out
match class-map tcp-udp
class-map type inspect match-all ccp-cls--2
match access-group name mng-self
class-map type inspect match-all ccp-cls--4
match access-group name mng-out-drop
class-map type inspect match-any ccp-cls-insp-traffic
match protocol cuseeme
match protocol dns
match protocol ftp
match protocol h323
match protocol https
match protocol icmp
match protocol imap
match protocol pop3
match protocol netshow
match protocol shell
match protocol realmedia
match protocol rtsp
match protocol smtp extended
match protocol sql-net
match protocol streamworks
match protocol tftp
match protocol vdolive
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-insp-traffic
match class-map ccp-cls-insp-traffic
class-map type inspect match-any http-https-DMZ
match protocol http
match protocol https
class-map type inspect match-all sdm-cls--2
match class-map http-https-DMZ
match access-group name web_server
class-map type inspect match-any MySQLService
match protocol mysql
class-map type inspect match-all sdm-cls--1
match class-map MySQLService
match access-group name DMZtoMySQL
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-icmp-access
match class-map ccp-cls-icmp-access
class-map type inspect match-all ccp-invalid-src
match access-group 100
class-map type inspect match-all sdm-nat-https-1
match access-group 102
match protocol https
class-map type inspect match-all ccp-protocol-http
match protocol http
policy-map type inspect ccp-permit-icmpreply
class type inspect ccp-icmp-access
inspect
class class-default
pass
policy-map type inspect sdm-pol-NATOutsideToInside-1
class type inspect ccp-cls-sdm-pol-NATOutsideToInside-1-1
drop
class type inspect sdm-cls-sdm-pol-NATOutsideToInside-1-1
inspect
class type inspect sdm-nat-https-1
inspect
class class-default
drop
policy-map type inspect ccp-inspect
class type inspect ccp-invalid-src
drop log
class type inspect ccp-protocol-http
inspect
class type inspect ccp-insp-traffic
inspect
class type inspect CCP-Voice-permit
inspect
class class-default
drop
policy-map type inspect ccp-permit
class class-default
drop
policy-map type inspect sdm-policy-sdm-cls--1
class type inspect sdm-cls--1
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--1
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--3
class type inspect ccp-cls--3
inspect
class class-default
drop
policy-map type inspect sdm-policy-sdm-cls--2
class type inspect sdm-cls--2
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--2
class type inspect ccp-cls--2
inspect
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--5
class class-default
drop
zone security out-zone
zone security in-zone
zone security dmz-zone
zone security mng
zone-pair security ccp-zp-self-out source self destination out-zone
service-policy type inspect ccp-permit-icmpreply
zone-pair security sdm-zp-NATOutsideToInside-1 source out-zone destination in-zone
service-policy type inspect sdm-pol-NATOutsideToInside-1
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ccp-zp-out-self source out-zone destination self
service-policy type inspect ccp-permit
zone-pair security zp-dmz-to-outside source dmz-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security zp-outside-to-dmz source out-zone destination dmz-zone
service-policy type inspect sdm-pol-NATOutsideToInside-1
zone-pair security sdm-zp-dmz-zone-in-zone source dmz-zone destination in-zone
service-policy type inspect sdm-policy-sdm-cls--1
zone-pair security sdm-zp-in-zone-dmz-zone source in-zone destination dmz-zone
service-policy type inspect sdm-policy-sdm-cls--2
zone-pair security sdm-zp-dmz-zone-self source dmz-zone destination self
service-policy type inspect ccp-policy-ccp-cls--1
zone-pair security sdm-zp-mng-self source mng destination self
service-policy type inspect ccp-policy-ccp-cls--2
zone-pair security sdm-zp-mng-out-zone source mng destination out-zone
service-policy type inspect ccp-policy-ccp-cls--3
zone-pair security sdm-zp-out-zone-mng source out-zone destination mng
service-policy type inspect ccp-policy-ccp-cls--5
interface Null0
no ip unreachables
interface BRI0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
encapsulation hdlc
shutdown
isdn termination multidrop
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no atm ilmi-keepalive
interface ATM0.1 point-to-point
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
pvc 8/35
pppoe-client dial-pool-number 1
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
switchport access vlan 3
spanning-tree portfast
interface FastEthernet3
switchport access vlan 2
interface Vlan1
description $FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security in-zone
ip tcp adjust-mss 1412
interface Vlan2
description $FW_INSIDE$
ip address 192.168.1.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security dmz-zone
interface Vlan3
description $FW_INSIDE$
ip address 10.0.10.1 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly
zone-member security mng
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip flow ingress
ip nat outside
ip virtual-reassembly max-reassemblies 64
zone-member security out-zone
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname [email protected]
ppp chap password 7 0918425001505245
ppp pap sent-username [email protected] password 7 13511B4B1359417D
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.0.10.0 255.255.255.0 Vlan3
no ip http server
ip http secure-server
ip nat inside source list 1 interface Dialer0 overload
ip nat inside source static 192.168.0.101 94.70.142.113
ip nat inside source static 192.168.1.102 94.70.142.127
ip access-list extended DMZtoMySQL
remark CCP_ACL Category=128
permit ip host 192.168.1.102 host 192.168.0.101
ip access-list extended Spoofing
remark CCP_ACL Category=128
permit ip 10.0.0.0 0.255.255.255 any
permit ip 192.168.0.0 0.0.255.255 any
permit ip 172.16.0.0 0.15.255.255 any
ip access-list extended VTY_incoming
remark CCP_ACL Category=1
permit ip host 10.0.10.2 any
ip access-list extended WebServer
remark CCP_ACL Category=128
permit ip any host 192.168.1.102
ip access-list extended mng-out
remark CCP_ACL Category=128
permit ip 10.0.10.0 0.0.0.255 any
ip access-list extended mng-out-drop
remark CCP_ACL Category=128
permit ip any any
ip access-list extended mng-self
remark CCP_ACL Category=128
permit ip any any
ip access-list extended web_server
remark CCP_ACL Category=128
permit ip 192.168.0.0 0.0.0.255 host 192.168.1.102
logging 10.0.10.2
access-list 1 remark INSIDE_IF=Vlan1
access-list 1 remark CCP_ACL Category=2
access-list 1 remark VLan 1 Access
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 1 remark VLan 3 Access
access-list 1 permit 10.0.10.0 0.0.0.255
access-list 1 remark Vlan 2 Access
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip host 255.255.255.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
access-list 102 remark CCP_ACL Category=0
access-list 102 permit ip any host 192.168.0.101
dialer-list 1 protocol ip permit
no cdp run
control-plane
banner login ^CWARNING!!!This is a highly monitored private system. Access is prohibited!!^C
line con 0
no modem enable
line aux 0
line vty 0 4
access-class VTY_incoming in
password 7 12292504011C5C162E
login local
transport input ssh
scheduler max-task-time 5000
ntp authentication-key 1 md5 10603D29214711255F106B2677 7
ntp authenticate
ntp trusted-key 1
ntp master 2
end

Hello karolos,
Here is the thing.
You said you are trying to access 94.70.142.113 and that is a server on the DMZ but based in your configuration that is not true
ip nat inside source static 192.168.0.101 94.70.142.113
So 192.168.0.101 is on Vlan 1 witch is the in-zone
interface Vlan1
description $FW_INSIDE$
ip address 192.168.0.1 255.255.255.0
security in-zone
If you got confused with the security zone that the host is assigned to then just add the following and it should work
ip access-list extended WebServer
permit ip any host 192.168.0.101
Regards

Trouble with ADS configuration: What is going wrong?

Hi Experts,
I need some help in configuring the ADS Call on Solution Manager 7.0 (First question: is ADS runable on Solution Manager - maybe that's the error...?). I only need printforms, no interactive forms.
Java and Abap is running on one machine.
This are the notes I've checked:
944221
894009
1016404
915399
That's what I configured:
1. There were no adsuser and ads_agent, so I created them, adsuser as system user, ads_agent as service user, both with the same pw. For ads_agent I assigned the roles SAP_BC_FP_ICF and SAP_BC_FPADS_ICF, for ads_agent the role ADSCALLERS. I had to create the role ADSCALLERS before.
2. Assigning JAVA Security Roles: Visual Administrator - Cluster - Server - Services - Security Provider - User Management. There I have checked whether the user adsuser is assigned to the group ADSCALLERS and is unlocked. In Policy Configuration (still in Visual Admin) I checked component "com.adobe/AdobeDocumentServices*AdobeDocumentServicesAssembly.jar" and mapped user adsuser and ads_agent to the Security Role ADSCallers.
3. RFC Connection: HTTP Connection to external Server (was available), Connection Type G, Target: our server, Servicenr 50400 (System Nr is 04), präfix is "/AdobeDocumentServices/Config?style=rpc", user is "ADSUSER", pw the same like in user master data.
Testing the RFC Connection was successfull.
4. Checking the services (SICF): fp and fpads are active.
5. Visual Administrator: Creation of the connection from JAVA to ABAP: Visual Administrator - Cluster - Server - Destinations - HTTP. I created a new destination with name FP_ICF_DATA_/sap/bc/fp/form/layout/fp_test_00.xdp with username ADSUser and pw is working fine.
I hope you guys can help. I'm working on this issue now for some days, without any improvement.
What is going wrong and what did I forget to configure?
Thanks in advance,
Tan
EDIT: In Visual Administrator the users ADSUSER, ADS_AGENT and SAP* are locked automatically after some time...
Edited by: Tan Yildiz on May 10, 2011 10:51 AM

Hi again,
maybe you guys can help now.
Point 6 is fixed partially:
6. Execution of FP_TEST_00, FP_PDF_TEST_00, FP_CHECK_DESTINATION_SERVICE there comes a popup to enter the username and pw, without any ettect. After I entered the data 3 times the popup is closed and there comes the error
After executing the reports the popup is not prompting any more. There comes the error immediately:
ERROR CODE : 100.101
ERROR MESSAGE : SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code
Fehler SOAP Framework: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send returned with status code(100.101).
I figured out the the error lies within the RFC Destination, but I have no idea where.....
The target device is our server name (no http:...stuff, just the name "hanna") the service nr is 50400 (04 is the system nr) and path prefix is "/AdobeDocumentServices/Config?style=rpc"
So long everythings seems to be ok for me.
But by testing the destination there is nothing happening.....no reaction, no error, no warning, no success message.....other RFC connections are working.
If I change the service nr to 50000 (there is another system where ads is working) the test result is a success message......
Any idea whats going wrong? Thanks in advance

Everything seems to be going wrong...

Similar Messages

Maybe you are looking for