Everything works fine, but my LEDs are flashing amber since a power outage

I'm not having any issues with my new Airport Express base station, except that it's flashing amber all the time. This happened recently after a power outage in my house. It was odd also that a soft reset reset the base station as if I had done a hard reset, back to factory defaults, but outside of those two anomalies, everything's working properly.
I have it set on bridging, which is a bit strange, but that's the way it's been working all along with my ISP and when I had it set to DHCP then it was flashing orange.
I've done hard and soft resets on the base station and a power cycle on the DSL modem -- no change. I've turned up logging to error. Nothing there is catching my eye. I've restarted my iMac, turned off time machine, and edited settings from my MBP. No change.
Basically, I'm continually flashing amber since a power outage in my home. Otherwise it's working properly as far as I can tell. Any tips?

Correct. Seems fully functional. Perhaps clients had a more difficult time finding it when waking from sleep, tough to say as it occasionally has happened all along. I'm using a hidden network, with WPA2/Personal and MAC address access control.
Confirmed, ADSL speadstreem 4200 ADSL modem.
The plot thickens: I cycled power on it this morning, now I'm getting green LED but one client can't see it: the iMac. That was the client I was using to configure it, primarily, so perhaps that's part of the problem. Continuing to troubleshoot by removing layers of security to see if I can get the iMac to see it again. Restarting the iMac and resetting PRAM didn't resolve.
Thanks for your response. Any tips welcome!

Similar Messages

Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpe

Hi. I have set up the trial versions of Photoshop CC 2014 and Lightroom 5.6 (ie the Photography plan) on a desktop that I have added a new drive to with Windows 7. Everything works fine BUT it is an old computer and I'm thinking that it may pack up unexpectedly. These things happen. I want to sign up for the Photography plan but I also have a Windows Vista laptop, and that is old too so I may want to put the apps on a new desktop and a new laptop, having already installed on my desktop. That makes three activations. Am I allowed to do this? Cheers. Paul

You cannot have three activations. It's simply not technically possible. If and when the time comes, you simply deactivate/ sign out on one of the old systems and install on the new one. If the system goes belly up, you contact support to reset your account. No need to make it more complicated than that and overthink it.
Mylenium

Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]-

Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]…

Hello, I've just tested my form on all mac navigator (safari, google chrome, opera, firefox) everything works fin, but I've encountered a message error when i tested it on a pc (windows 8, explorer 11.0) : [ref: 4TjwhtHy2SB5C8LI-Eku2A, serverError]…

Urgent : everything works fine, but cannot find a .jpg file

This is my first attemp at creating a jar file and running the running the program
i created a jar file ran it, everything works fine but when i click the about menuitem, it throws a java nullpointer exception,
it says it cannot find the .jpg file that is used for the about box,
the code works fine if i run as a normal program i.e
java <somepackage>/<classname>
javax.swing.ImageIcon aboutimage;//in the constructor
try{
aboutimage = new javax.swing.ImageIcon(getClass().getResource("resources/image/"+"About.jpg")); //-- exception at this line
               }catch(Exception e){
                    e.printStackTrace();
               }

i post a bit more details in case sm1 might want to refer,
Thanks in advance ..it's a bit long sorry for the inconv.
I created a jar file this way,
- first created the Manifest.txt file and added the the main class,
follwed steps from the tutorial at sun:
http://java.sun.com/docs/books/tutorial/deployment/jar/appman.html
then this at command prompt
jar cfm Aid.jar Manifest.txt IDTT/
Now when i run the jar file every thing runs fine except for the About.jpg,
that file doesn't show up when i click the about button in the application
Everything works fine when i directly run the file from command prompt as java IDTT/Aid
Error recieved:
Exception in thread "AWT-EventQueue-0"
java.lang.NullPointerException
at javax.swing.ImageIcon.<init>(Unknown Source)
at IDTT.Aid$AboutPanel.<init>(Aid.java:336)
at IDTT.Aid.menuItem_AboutActionPerformed
(Aid.java:304)
this is line 336 in Aid.java:
javax.swing.ImageIcon aboutimage = new javax.swing.ImageIcon(getClass().getResource("resources/"+"About.jpg"));
Aid.java has package as
package IDTT,
the files in folder graph
have package as
package IDTT.graph
"resources" is a normal folder that has a image file called About.jpg
and another folder called "html" that contains many html files.
there's no error for html files
This is the package/folder tree structure
IDTT
|
|- Aid.java (has main)
|
|- graph (a package that Aid.java uses)
|
|_ resources
    |
    |- image
    |      |--- About.jpg
    |
    |- html

I've just setup my new iPad Air. With new Apple ID ect everything working fine, but I can't redeem my iTunes voucher it says wrong password/ user name but they are not wrong. I've reset password same problem anyone help?

II've just setup a new iPad Air for my daughter with a new apple ect, everything is working fine, but I can't get it to redeem the I tunes voucher. It asks for I'd and password, put them in and comes up with wrong Id/password. They are not incorrect answers, but reset password just incase. Same problem. Also tried making another apple account. Same problem again can anyone help?? Please

Your iTunes Voucher is link to the old Apple ID.

Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine, but I have another machine with just "Reader" installed - is there als

Hello, I have the usual issue to use AcroExch.PDDoc/AcroExch.App/AcroExch.AVDoc objects in Visual Basic (MS EXCEL). On my company's machine I have Acrobat X and everything works fine. I am looking for the cheapest solution to get the stuff running on another machine... is there any way to do that with the Acrobat SDK, or do I need to purchase a full version of Acrobat XI ($$) ?

The Acrobat SDK is nothing by itself. It is just information on how to automate Acrobat - just as the Office SDK doesn't include Office, but is for people who already have purchased Office but want to automate it.
These automation things are MARKETING TOOLS FOR ACROBAT. Consider this and the technical limitations make a lot more sense.
So, yes, you need to buy Acrobat. Standard is cheaper than Pro.

Help! Turned on my macbook, everything works fine, but it beeps every 4 sec

I have a Macbook pro 2.4 ghz. Bought it about a month ago, and everything worked fine until I turned it on just now. Everything works fine, however the computer beeps ever 4 seconds at a consistent interval. tried to look it up on the support page, but couldn't figure out what's wrong. Any ideas. Please help!!! I have tests coming up and can't afford to send it in to get diagnosed. Thanks.
David

Does it Beep once or 4 times at each Interval, they imply different problems?
Does the front button light flash at the same time ?
See here for more: http://www.welovemacs.com/whdoallthbme.html
It does sound like a RAM problem, you could try re-seating the card(s) in the slot(s).

Water Damage .. Everything works fine but internal speaker

i don't know y .. i was using ipod near around swimming pool... .anyway.. i dropped it.. while my ipod play music..
i coundn't turn off my ipod.. i was so dumb..
now..everything works fine..but internal speaker doenst work..
when i unplug headphone and then use volume it shows headphone volume ...not regular volume.. ..
is that meanning internal speaker broke?

I would like to reply to make a final update. I was fixing a screen for a friend and had all the tools that came with the screen. I decided I might as well have a peek at mine and maybe blow dry inside my phone.
Well I pulled the LCD cable and could see slight corrosion on the one corner and what looked to be a little black. I figured it was shorting on that corner. I cleaned with some contact cleaner and scrapped it off gently as best I could.
Plugged everything back in and bam she works. I understand this voids my warranty but I figured I was out of warranty with the water sensors triggered.
Thanks again for your help and advice!
Robb

After connecting Ooma phone service, my airport still works fine but yellow light constantly flashes. Should I be concerned?

After connecting Ooma phone service, my airport works fine, but it constantly blinks yellow. Should I be concerned?

You will get error messages in the airport utility..
Please go to the utility and click on the red circle on the airport. It should have a number in it.. which will be the number of issues you have.. eg double NAT.
If you previously had the Airport setup as main NAT in the network.. the ooma device just took over.. so you need to redo the setup of the airport to have a subsidiary role.
If you don't understand the issues list them for us.. but certainly adding the ooma is not going to go without effect.

When using Time Machine in Mac Mail, everything works fine but restored files do not appear in MM - On My Mac, and I cannot find them anywhere. Thanks

Time Machine Problem: Mac Mail. Cannot Find Restored Files in Mac Sidebar where they are supposed to go.
I am using Mountain Lion on my MacBook. I have successfully used Time Machine in the past, but I have incurred the following problem that I am requesting help on.
I am attempting to recover Sent and Inbox Mac Mail sent. I go through all the steps properly and locating what I want to recover, and after hitting Restore everything seems to be working and I get a message "Restoring 207 files". The guides say that then I am supposed to find the files in Mac Mail sidebar under ON MY MAC. But they are not there nor anywhere else I have looked. In other words, everything appears to be working fine except I cannot find the restored files.
Thank you for you help.
Jerry

Although you can restore messages from a Time Machine snapshot within the Mail application, it generally won't work with messages that were saved by an older version of Mail. In that case, you have to use an alternative method.
Triple-click the line below to select it:
~/Library/Mail/V2
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder selected. Inside that folder are subfolders representing your Mail accounts. The names refer to the email addresses you use. Decide which ones you want to restore messages from.
Enter Time Machine and scroll back to the snapshot you want. Select the account folders you want and then selectRestore ... to... from the action menu (gear icon) in the toolbar of the snapshot window. Restore the folders to the Desktop, not to their original location.
From the Mail menu bar, select
File ▹ Import Mailboxes...
Import from the mailboxes in the folders you restored to the Desktop. The imported messages will appear in a new mailbox. Move the ones you want to keep wherever you like and delete the rest. Then delete the folders on the Desktop.

HT3180 The internet provider reset my router and now my apple Tv does not work in netflix i get ATV-ui10 error and when i perform a network test it works fine but no movies are coming up on the screen and you cannot select anything.

The internet provider reset my router and now I cannot use Apple Tv. I tired restore and reseting the apple tv and the Network test is fine. Netflix shows error atv-ui10 and you no movies come up it just shoes black tickets at the top of the screen and says i am not connect. Internet works fine.

Delete/forget the network connection on the ATV and reconnect to the network.
Power cycle the router.

I installed windows 7 with bootcamp, also the support software with the drivers. Everything works fine, but my usb hubs don't work on windows. Can Anybody help me?I´m using an iMac with OSX.

I Installed windows with bootcamp on my imac, with the support software(drivers,etc).
Windows works perfectly appart from the usb hubs.
Can anyone help me?

Hello,
Are these the built in hubs, or external ones?
If external, are they bus powered or do they have their own AC power?

I broken one of RAM holders, everything works fine but calm my soul please

Hi!
Today i finally upgraded my Ti's memory to 1GB, and, during the installation ( or maybe i didnt realized it before ), one of the RAM holders ( the one that make that pleasant click when ram sits tighly ), upper right one, broke. Well, kinda scratched off i guess, cause this plastic is VERY fragile. RAM holds still, just this stupid feeling that its not firmly "clicked".
Ram is system-present, everything is verified and ok i Sys Profiler. No performance issues.
Can someone just grab some weight from my shoulders, cause i have this kinda paranoic attitude to my Mac. Its not my old PC which i ripped with scissors and screwdriver.
All best
Benedict

Normnod's suggestion is an interesting one, but I would have some concern about the acetic acid used in the silicone sealants with which I am familiar possibly causing problems down the line, and also possibly about impairing heat dissipation. There is a type of highly heat-resistant orange plastic tape widely used in electronic devices — I believe it's called Kapton tape, and you can see some inside your Powerbook if you open it up — that can be used to hold the top RAM module down by affixing a strip of tape to the underside of the lower RAM module, wrapping it around the outer edge of both modules, and sticking the other end to the top side of the upper module, thus fastening the two modules together in parallel planes. This has been reported here as a successful workaround for broken RAM clips in the past, including cases where the upper module mildly resisted lying flat in its slot.

I have an iphone 5..everything works fine but it doesnt reset..when.i.do.reset from.settings menu...the screen blacks off far 2seconds and returns to.normal...what shall I do.now?? I bought the phone frm usa and using in india now!! plz help.me

Unable.to.reset my iphone..wen i.do.it goes bak.to settings menu...any.one help.plz

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

Jspsmartupload.. Everything works fine but i cannot figure out remote uploa

I can upload to the filesystem that jsmsmart runs on. Problem is that I want to upload to a remote filesystem. something like 216.xx.xx.xx/myFolder. Is this possible? Does anyone have any idea how to do this if its not possible with jspsmart?
Thanks and Ill take any info that I can get :-)

Just posting back up to the top. Im coming to the assumption that you must upload to the local server and then ftp to the remote location. Maybe I should take the time to write something that would allow the upload of client files via the web to be uploaded to a remote server. Would probably make a fortune :-).......If I only had the time...
Ill take any and all suggestions...
Thanks

Everything works fine, but my LEDs are flashing amber since a power outage

Similar Messages

Maybe you are looking for