Everytime I add a sequence to a clip only the audio is there?

So i've been fiddling around with adobe premiere and fixed most of my stuff on my own, now when I do stuff I can't see the video portion of the clip in the timeline, only the audio? Help pls asap!

Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

Similar Messages

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

    I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

    Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

  • How come everytime i add an image to my pages document the screen goes blank and then closes the app?

    How come everytime i add an image to my pages document the screen goes blank and then closes the app?

    Hi Fayed11,
    Welcome to Apple Support Communities.
    You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Have a great day,
    Jeremy

  • I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played.

    I was making a movie on iMovie, and was trying to use the green screen to make a split screen. I pressed on the green screen button, but the second clip didn't play next to the first, and only the audio played. I tried again with some different clips and some worked and some didn't. This hasn't happened before. What should I do? (I am using iMovie '09)

    No guarantess but try smc and pram resets,

  • How can i hold a spot in a clip, let the audio continue for a moment and then resume the clip and audio together?

    how can i hold a spot in a clip, let the audio continue for a moment and then resume the clip and audio together?

    you want to use the retiming tool. you can select what you want to hold, then use the "Hold" command (shift-H) to create a single frame of a default duration, which you can then change to whatever length you want by dragging the retiming handle.
    Here's the page in the help manual that describes the hold feature in detail:
    http://help.apple.com/finalcutpro/mac/10.0/#ver4c2173c9

  • When I import my files only the audio plays back not the video. If I export the sequence its there?

    When I import my files only the audio plays back not the video. If I export the sequence its there?
    I am new to Premiere having just downloaded the 30 day trial yesterday, I jumped straight in and imported all of my files from my video camera however in Premiere only the audio plays back with the displays just showing a black space.
    Out of curiosity I dragged three or four shots into the sequence editor and then exported them and played this through VLC and the video was there?
    As I said I am completely new to Premiere having only spent around 3 or 4 hours with it in the past, I read a few forum threads around similar issues but couldn't find any solutions and as I am trying to edit together a short film for a college project due in soon I need to try and find a way to fix this A.S.A.P
    Any help would be appreciated and if theres any more info I can provide please let me know.
    Thanks
    Drew

    Being new, I'm sure you don't know about the NEW ITEM process, so click/read about that at this link
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923
    Also, More information needed for someone to help... please click below and provide the requested information
    -PPro Information FAQ http://forums.adobe.com/message/4200840
    What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    What is your exact graphics adapter driver version?
    Have you gone to the vendor web site to check for a newer driver?
    For Windows, do NOT rely on Windows Update to have current driver information
    -you need to go direct to the vendor web site and check updates for yourself
    ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    Exactly what are you editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

  • I have quicktime  player 7.7.2. A relative video clips from his phone. Previously they downloaded with both video and audio. As of Sept. 30 only the audio downloads, yet Quicktime still plays older saved video/audio clips. Help?

    I have Quicktime Player 7.7.2. A relative has been sending video clips from his phone since June, and until Sept. 30 both the video and audio would download. SInce that date only the audio downloads, yet I can still open and play the older saved videos just fine. I tried looking at QuickTime help info available. One place said something about purchasing Quick Pro for use with 7.7.2, but if I need that, why can I still open older saved videos? Thanks for any help.

    I'm adding more information:
    in Finder, my iMovie folders are all visible and accessible.  When I click on a clip from iMovie Events folder, Quicktime opens and plays the clip.  ALL my video is not missing - it just isn't showing up in the Event Library!
    This happened all of a sudden, while I was working on iMovie project (on both computers).
    All my Projects are intact, and play when I open them. 

  • I recently downloaded itunes 10.3.1 for MAC.  BUT everytime I go to help to try and find the diagnostic options, there is no drop down option for diagnostic?  Can someone help?

    i recently downloaded itunes 10.3.1 for MAC.  BUT everytime I go to help> to try and find the diagnostic options, there is no drop down option for diagnostic?  Can someone help?

    Why not available in Mac version. We are behind proxy and need this to see why iTunes isn't working?

  • Project renames sequence and all clips in the sequence when a clip is added

    My project is renaming my sequences and the clips in those sequences whenever I add a clip. For example, I have a sequence called "dance section 2", which contains 20 some-odd clips with various names. When I add a clip named "drop from above", the name of the sequence is changed to "drop from above", and the name of every other clip in the sequence is also changed to "drop from above" (video, audio, stills, everything). When I add a clip named "spins", all the names are changed to "spins".
    The name of the sequence is changed in both the timeline and the browser, but the names of the other clips are changed only in the timeline. In the browser, they keep their old names. The exception to this is the last clip added before the name changer. For example, if I add "drop from above" to the sequence, and then add "spins", the clip named "drop from above" is renamed "spins" in the browser as well as in the timeline, but the other clips are renamed only in the timeline.
    The clips in the sequence also keep their original content - so the sequence looks the same as it did before, but all the names of the clips are changed.
    This is only happening in one project. All of my other projects are working fine.
    I've tried restarting and deleting preferences. I've also looked at the autosave vault for the project. The backup projects saved after a certain time all behave the same way, and the projects before that time all behave normally. I can't imagine what would have caused this, though, since I've been working on this project all day and nothing's happened to my computer or hard drive or anything.
    Also, there are no freeze frames at the beginnings of my sequences (I read another thread with a somewhat similar issue and getting rid of freeze frames seemed to help that person).
    I'm in FCP 7.0 on a Macbook Pro.
    Thanks in advance for your help!

    Welcome to the discussions...
    I've had this happen. My guess is that it's related to round-tripping to/from Color, but I can't be sure. IMHO, the sequence is corrupted. I just dealt with it for a while, then rebuilt it by making changes from an earlier version.
    Sorry I don't have a better solution, but at least you know you're not alone.
    Patrick

  • All of a sudden when I try to add footage to my sequence only the audio will go in.

    This was not happening last week on the same project, I was pretty well into it when this stared.
    I've tried everything I can think of, restarting everything, trying footage from other jobs, making a new project, new sequence. The video layers are not locked . . . but every time the audio comes in and I get the circle with the cross through it for the video. I'm on PPro version 7.2.1. for Mac. All I can think to do is re-install.

    Did you source patch the video track?
    Adobe Premiere Pro Help | Source patching and track targeting

  • Using sequence as source, but only one audio track avail

    So I have created a "raw" sequence containing multiple source clips. The source clips have 4 channels of audio and 1 channel of video. When I create my sequence, I see all of my channels....great.
    However, when I load the "raw" sequence into the source monitor...I no longer have access to my 4 channels of audio independently. I simply get one audio source track and the audio is mixed....as it appears in the timeline.
    When I create a new "raw" sequence, I select multichannel for the master. I've tried every track type (mono, standard, adaptive)...and still I only get one audio channel when the sequence is loaded into the source monitor.
    I watched several tutorials about nesting, but there is little discussion about multiple audio tracks.
    Thanks...

    Its kind of the point of using a a nest.  ( a pre comp if you like)
    Nothing stops the editor going back to the source of the nest to work on the individual assets.  These will update automatically into the nest.

  • Clips only show audio in PE9, but run fine in Organizer

    In PE 9 the preview of my clips only show the wave of the audio.
    I have reinstalled PE9 but it makes no difference. Startup is incredibly slow, it easily takes 10 minutes for a project to open..
    I have tried to delete the prefs file at appdata\roaming\adobe\prem elements\9.0\Premiere elements prefs  but it makes no difference (is this the right file? it has no extension).
    On the net there is a tip to click ctrl-alt-shift and then click to start up PE, whioch then supposedly gives you an option to delete the prefs, but I dont think anything happens.
    Extra strange is that it all used to work all right, suddenly the clips were audio only. I cannot pipoint a change on my system that could the the cause.It happened after I worked a lot in Organizer.
    BTW My program is on C, the data are on D.
    Does Organizer treat clips differently then PE itself?
    Thanks

    My Event Log gives the following event linked to the refusal of Organizer to start:
    Log Name: 
    Application
    Source:   
    Application Error
    Date:     
    12-3-2015 22:02:21
    Event ID: 
    1000
    Task Category: (100)
    Level:    
    Error
    Keywords: 
    Classic
    User:     
    N/A
    Computer: 
    VENOM3
    Description:
    Faulting application name: PhotoshopElementsOrganizer.exe, version: 9.0.0.0, time stamp: 0x4ca3a3b5
    Faulting module name: PhotoshopElementsOrganizer.exe, version: 9.0.0.0, time stamp: 0x4ca3a3b5
    Exception code: 0xc0000005
    Fault offset: 0x0018f549
    Faulting process id: 0x1300
    Faulting application start time: 0x01d05d07d222ed55
    Faulting application path: C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe
    Faulting module path: C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe
    Report Id: 129a40d6-c8fb-11e4-b37e-20cf30f2fd34
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-12T21:02:21.000000000Z" />
    <EventRecordID>127857</EventRecordID>
    <Channel>Application</Channel>
    <Computer>VENOM3</Computer>
    <Security />
      </System>
      <EventData>
    <Data>PhotoshopElementsOrganizer.exe</Data>
    <Data>9.0.0.0</Data>
    <Data>4ca3a3b5</Data>
    <Data>PhotoshopElementsOrganizer.exe</Data>
    <Data>9.0.0.0</Data>
    <Data>4ca3a3b5</Data>
    <Data>c0000005</Data>
    <Data>0018f549</Data>
    <Data>1300</Data>
    <Data>01d05d07d222ed55</Data>
    <Data>C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe</Data>
    <Data>C:\Program Files (x86)\Adobe\Elements 9 Organizer\PhotoshopElementsOrganizer.exe</Data>
    <Data>129a40d6-c8fb-11e4-b37e-20cf30f2fd34</Data>
      </EventData>
    </Event>

  • When I go to put a clip into the my sequence, only the audio goes

    Even with the clips I have already put into the sequence, no video will get pulled over.

    It is likely that you deselected the track targeting.
    Adobe Premiere Pro Help | Source patching and track targeting

  • Premiere Elements 12 - The project stopped accepting new mp4 and jpeg clips onto the timeline.  There are several there but when adding new ones they appear to place properly then immediately disappear.  Any fix?

    Windows 8.1 elements 12 - I have a project underway that was operating fine as i built the video file, then stopped accepting new files, both mp4 and jpeg.  It appears to accept them when dragged onto the timeline but then they immediately disappear. Any solutions?

    boondocker
    That is an unusual situation that you are presenting.
    Have you updated from 12 to 12.1 via the project's Help Menu/Update? If not, please do so.
    Do you have the latest version of QuickTime installed on your computer with Premiere Elements 12 on Windows 8.1 presumed 64 bit?
    The usual drill
    a. What is your project preset? What are the properties of your sources media? What is the brand/model/settings of the camera recording your mp4 and jpeg.
    What are the pixel dimensions of these jpeg images and how many of them are there in the project (especially when the problems set in).
    b. What is the size/duration of your Timeline content when the program no longer accepts new files?
    c. Describe status of your computer resources. Also, where are the Scratch Disks directed and how much free hard drive space is at that location(s)?
    Troubleshooting for Unexpected/Unexplained project problems...Deletion of the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which it exists.
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    12.0
    and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
    Let us start from the above and then decide what next.
    Thank you.
    ATR

Maybe you are looking for