Everytime I am in the processing of burning a cd to itunes, macbook freazes
its concerning me....all these issues are arrising with my macbook...it fails to burn songs onto CD, and now it fails to copy music onto hard drive from cds, it just randomly freezes and i have to force quit or hold down the power button till it turns off...this is extremly irritating, what should I do about this
"I did Verify disc and it says it: Volume Passed verification...will this let me be able to copy and burn discs normally now? "
No, but at least it eliminates filesystem corruption as a possible cause.
You may have to let Apple look at the MB. There could be a defect. Are you still under warranty?
Has the RAM memory on your MB been upgraded? That might be another possible cause: bad RAM.
Similar Messages
-
I go through the process of burning a DVD from a Premier Pro Project and at the end of the process I get an encoding error and the dvd does not start burning. How do I fix this?
adam@honestmusky wrote:
Yes I am using encore. I used to have no problem doing this, but I had to get a new computer and now something isn't working right.
How about some DETAILS?
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Also describe the EXACT steps you take to go from Premiere Pro to Encore -
I received a message that my iphone 4S was unlocked and that I should connect to iTunes to complete the process. When I connect to itunes I do not get the message "Congratulations you iphone has been unlocked". I have the latest itunes. Welcome help.
ihabf
[email protected]See Here
https://discussions.apple.com/message/15290457#15290457
From the More Like This on the right... -
I am in the process of trying to transfer my iTunes library from one computer to another. Some of the music/film info has been edited (by me) in my library (using get info). When put onto new computer (following apple's instructions- using an external hard drive) the info has gone back to how it was before i edited it.. Help!?
Hello,
I would recommend taking a look at the article below for more information about migrating your iTunes library.
iTunes for Windows: Moving your iTunes Media folder
http://support.apple.com/kb/ht1364
-Griff W. -
trying to download an instal ios 7 on my iphone 4s, after half an hour into the download it came up with a message saying failed and everytime i try again the download doesnt start. tried downloading from itunes aswel but not working. anyone know why?
The servers are overloaded. There are a hundred million people all trying to download iOS 7 at one time. Try again later
-
recently got went through the process of unlocking my phone through itunes, i am now unable to back my phone up to my computer, its asking me for a passcode that i used to unlock it, but i dont have a clue what it is. any ideas?
that works on my phone! But when im on ITunes on my computer and back it up manually, it comes up with a message saying, the passcode used to unlock iPhone is incorrect
-
What is the process for recording vinyl records into iTunes using the Sony USB Turntable?
What is the process for recording vinyl records into iTunes using the Sony USB Turntable?
What is the process for recording vinyl records into iTunes using the Sony USB Turntable?
-
I have copied all of my CD's, probably over 100, on to my iMac, through iTunes and now am considering buying a new iMac. Would like to be able to transfer what's in my music library w/o having to recopy all of the CD's. Any thoughts? Can I do it throught the iCloud or do I need to buy and external storage device?
Thanks BrendaWhen you buy your new iMac you will be able to have the installation process transfer all your applications, data (including music, pictures, documents, etc) and settings to your new computer. In the past that was done via Firewire. I'm not entirely sure of the process with the new iMacs that don't have firewire. I think it can be done via ethernet and probably via tha thunderbolt cord using a firewire adapter but you'll want to check that out.
With the your new computer properly connected to your old computer, the initial booting of the new computer will include the ability to move everything over.
If for some reason you don't want to do that (smart if you have some horrible software issue that is causing problems) you can connect your old computer to the new one and start it in Target Disk mode where it will be seen as a hard drive. You can then manually copy over all your music and import that into iTunes (and any other data you want).
Somebody here will surely point you to directions for connecting an older iMac with no Thunderbolt to a newer iMac with no Firewire. -
hELLO i HAVE A NANO IPOD... A NEW USER OF IT AND iTUNES... HAVE MY ITUNES ON MY OLD COMPUTER... JUST PURCHased a NEW LAP TOP. WHAT IS THE PROCESS OF ACCESSING THAT ACCOUNT WITHOUT LOSING EVERYTHING OR REPURCHASING SONGS.
THANK YOU VERY MUCH... i AM OLD AND NOT TECHNOLGY SAVVY!Hi Mary,
Here is an Apple Support link that provides all options for moving your iTunes Library to a new computer as well as full instructions for completing the one you select:
http://support.apple.com/kb/HT4527
Hope this helps!
Gail -
Has anyone been able to resolve the issue of burning CD's from itunes 11 in Windows 8?
Everytime it begins burning the CD it cancels it within a few seconds.
I just tried rendering our a much simpler scene and saving out an EXR.. Works fine..... but it doesn't seem to work with a more complicated scene....EXR of depth pass below.
This is one that I can't get to open.
https://www.hightail.com/download/ZUczK0dxbEp0d0ZFQmNUQw -
On the shared option in Finder. Would there happen to be a quicker, more effective means of doing this? I don't have an external hard drive (other than my 1TB iMac's). Is that something that the 'Thunderbolt' cable is designed for?
It seems like it might take up to eight hours to compelte the transfer, since there is almost 20GB of material.I agree with Keith about using the Target Disk Mode, Transferring files between two computers using FireWire. This way there's no chance of errors due to dropouts using the wireless connection.
According to MacTracker your early 2009 Macbook does have a Firewire 400 connector which should do the job very well.
OT -
Onto all of my other device. Is all of the music in iCloud safe if I restore my MacBook?
I have an iPhone and an iMac. There is a lot of music that I have downloaded from iCloud onto both devices – however, not all. My question is: will the songs that have not been downloaded onto my iMac from iCloud be lost if I restore the computer that was the original location of all of that music?I agree with Keith about using the Target Disk Mode, Transferring files between two computers using FireWire. This way there's no chance of errors due to dropouts using the wireless connection.
According to MacTracker your early 2009 Macbook does have a Firewire 400 connector which should do the job very well.
OT -
How does the process of renting movies go about on iTunes?
I just wanted to know how the process of renting a movie from iTunes goes about; for instance, do I get a certain number of times to watch to movie or do I only get to watch it once!?
Click here for information.
(63826) -
I can't burn a cd of my own created music. I either get the error 4261, or after "Checking media" the process stops and nothing further happens. Have tried different burn speeds and cds. Have re-installed iTunes.Any suggestions please?
wm0203Sounds like the CD drive died. Luckily they cost next to nothing to replace. Or get an external LaCie instead. I have a dual G4 1.25 and the CD drive was always so anemic I use a LaCie Porsche with it.
-
Firefox won't start. Everytime I end the process/close the last window, it keeps getting stuck at about 2500k memory in the task manager. The only way I have to fix it is to change some kind of compability settings or try and access it in a new way, and every time it crashes/closed/computer blue screens that setting will no longer work.
That is a short term solution, but eventually I'll run out of ways to access firefox successfully. I've tried many solutions, and some worked, but only once. I have yet to find a permanent solution for this problem.First please update your plugins to make sure you are up to date. Shockwave Flash player has a newer version 16. In order to better manage the memory that Firefox uses please see these troubleshooting steps: [https://support.mozilla.org/en-US/kb/firefox-uses-too-much-memory-ram Firefox Uses too much RAM]
You also mentioned that Firefox crashes, we're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash IDs to help us learn more about your crash.
#Enter ''about:crashes'' in the Firefox address bar and press Enter. A Submitted Crash Reports list will appear, similar to the one shown below.
#Copy the '''5''' most recent Report IDs that start with '''bp-''' and then go back to your forum question and paste those IDs into the "Post a Reply" box.
''' Note:''' If a recent Report ID does not start with '''bp-''' click on it and select '''Submit'''.
(Please don't take a screenshot of your crashes, just copy and paste the IDs. The below image is just an example of what your Firefox screen should look like.)
;[[Image:aboutcrashesFx29|width=500]]
Thank you for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] article.
Maybe you are looking for
-
Reg..View a document in DMS
Hi friends Pl guide me I created a document in cv01n and user can access the documents via cv03n.if we use cv03n its download the document.but i want user cant download the document they can only view the documents.how can i achieve this in DMS.i sea
-
Thin White Line Or Border Around Web Page
Hi I do not know if this is my table because I have added the following code to the table in the page to stop this from happening... width="100%" height="100%" cellspacing="0" cellpadding="0" border="0" Yet there is still still a white border going a
-
Downloadable Manual for Acrobat 9?
I have the Design Premium CS4, and I have found downloadable .pdf files for every product except Acrobat 9. The last version of Acrobat I used was 6, and I know there are a lot of new features in this version that I would like to learn. So far, whene
-
I am having a problem using the help menu in Adobe elements 5
I am having a problem using the help menu in Adobe elements number five. When I open the help menu, the dialogue box defaults to an unreadable display font. Is there any way to change that default font? Using the help menus to find a solution is not
-
How do we make a suggestion to HP to add option for manually setting FULL FAN!?
I love my DV6z. But problem is the fan throttles through coolsense and when gaming, it dosen't crank to full throttle as early as I'd like it to. Is there a way to ask HP to add an option in coolsense or even a fn key combo to set fans to full speed