Everytime I am on any website, my text completely distorts, or a big white square goes across the screen. I have to highlight the text to show it.
It is even happening right now as I am typing this. I am unable to read anything on the top tabs and my text in the search bar is blurred. I tried the accelration technique within options, no luck. I have also tried other techniques written by users but nothing is happening. Trying to read websites is becoming very hard and I have to keep highlighted the words or pictures to show them.
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
It is possible that there is a problem with the font.
Try to set the gfx.content.azure.enabled pref to false or if this didn't help disable Direct2D by setting the gfx.direct2d.disabled pref to true on the about:config page.
*http://kb.mozillazine.org/about:config
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that has effect.
Similar Messages
-
I've downloaded iOS 7 on my iPad 2 and after a couple of hours I've got black, white and blurred lines going across my screen and I cannot use my iPad 2 at all, can't see anything or do anythingg on it. Can anybody help?
bigsavz wrote:
To be honest I don't need a lot of people commenting on this. I need Apple to comment ...
This is a user-to-user forum. Apple does not respond to posts here. You can give Apple your feedback on the Feedback page:
http://www.apple.com/feedback
They don't respond directly there, either. And once you post something here, people will comment as they see fit, regardless of what you originally hoped for. That's just the way it is with a public forum.
Try Groove for iPad. People seem to think it's a great replacement to the previous music app. -
My ipad 1st gen has loads of coloured lines going across the screen so I can't see any ideas ?
My ipad first gen has loads of coloured lines going across the screen so I can't see any ideas ??
Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
If that didn't fix things, do a restore:
http://support.apple.com/kb/HT1414
If that still didn't fix the issue, then there is probably a hardware problem. -
it hangs suddenly...n i could not trace tht it is hang...coz i open new tab n try to open any website, it does nt load....thn if i close firefox by pressing ctrl+alt+delete, in process...thn i hav to again open it n continue ma work....plz help me.....it happens daily more thn 20times........
Reverting to an old version of FF worked!!! WHOOHOOOOO!!!!!!
-
I Have tried everything and it still won't let me open anything in Safari. I have reset the Mac and router. It's just not working.
This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
Show Expired Certificates
select it. Otherwise it will show
Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
Secure Sockets Layer (SSL)
select
no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
If that's not what you see, post the contents of the window. -
Every time I visit any website and then try to read my emails, a draft email message first appears which I have not produced. I then have to delete it and then go to my in box which . How can I stop this please?
Does it happen in other browsers as well, not just in Firefox? If this is so, it has to do with your mail application and you will have to ask for help there.
-
I just installed firefox as a broser. everytime I click a website the following pop up window opens. "exc in ev handl: type error: oSAPLg.o root. log is not a function. How do I correct this.
Please see solution in http://kb.mozillazine.org/Problematic_extensions
for "McAfee Site Advisor".
(Windows): For best results you should uninstall '''McAfee Site Advisor''' from Control Panel > add/change programs (Programs and Features). Reboot the system. Then Reinstall from http://www.siteadvisor.com/ and reboot the system. When installing refuse other suggested (crapware) applications.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
The box says: We have enhanced our Coupons add-on which will enhance your browsing experience by displaying coupons as you shop and browse your favorite sites on the web. Check out our Privacy Policy and Terms and Conditions.
Turn off these enhancements CLOSE
Turn off does nothing, but CLOSE does close itHi vbaio, So far so good. Iran Malware antibytes and Spybot search and destroy after updating them both for the latest updates and so far not one of the pop ups .It is mid afternoon here in Australia and tonight will be the biggest test. I will advise you if it starts up again.Spybot actually I think who came up with the actual bug before I did the scans may have solved the problem.These programs are free here. Tweedle. Thanks again
-
Tried to download two movies. Neither was successful. Apple removed them from download que and reimbursed cost. Now I have 10MB of "Other" content that I cannot delete. There are NO movies listed on the Ipad or Itunes to delete. Any suggestions?
To Scxy1234: I also don't know why my paste special options only had 3 choices excluding "device independent bitmap'
To Steve Fan: I created the new second user account in my window 8. It was set as a standard account, not as administrator account as my first original user account. Specifically, i used the same email address with this forum account's to
create this second user account. It means that the second user account in my laptop also was a Microsoft account.
Can you guess what happened after i had logged in to the second user account? I opened some random websites by firefox, copied and pasted all text and pictures on these websites into a word document and onenote successfully without any problems!!!!
I saved this word document and exported this onenote section to a Usb. After that, i switched from second standard user account to my window administrator account and opened the two files which were saved to Usb previously. They were opened and displayed
normally as the same as what i previously had seen in the second user account, i.e. pasted text and pictures were displayed normally. However, when i opened the same web address again to copy the same text and pictures to word and onenote, there were only
text lines pasted successfully, excluding pictures! This old strange problem happened again when using original administrator account for logging in window. In contrast, when using the second standard user account to log in window, copying and pasting text
and online pictures of Microsoft office worked normally.
I truly don't figure out the reason(s) caused this strange problem. I think my case is a special case because i tried all solutions other people had tried but nothing worked.
Please help me!
p/s: when i logged in the second standard user account, i opened the paste special options in word and there were only 3 choices under paste special options, excluding "device independent bitmap" -
In my FTP client I can click to sort by date modified which is fine if you are in a folder and then it shows the file dates correctly - but any folders within the root folder don't they seem to display randomly all together at the bottom of the list and it is a nightmare trying to find what folders have files in them that have been changed.
Is there any way to get the folder to register the last date of a file within it that was modified?I dont know the answer yet, but i have noted what appears to be a bug in 10.9 in how it handles folder dates. Right now i am seeing folder modified dates changing randomly ot "today" - whatever date the parent folder was opened.
In the past my folders "modified" date was always the same as the last modified date of the items within. But this only moved down ONE level - if a subfolder's entries were updated the "gradfather" folder did not update.
But now severa people are reporting random, incorrect folder dates. I hoep this will be corrected soon, but who knows?
Grant -
Any help be great
You turned on Accessibility features.
General >> Accesibility >> Switch Control and turn it off again. -
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/919957]]</blockquote>
So I tried to go to my iGoogle page and it did the same thing. I am certain there is a button to fix this but i swear i do not know where it is?
The support article also took me to "untrusted information"Sounds like you have a link hijacker installed which McAfee doesn't find for some strange reason. What I suggest you do is to go to [http://www.malwarebytes.org/ Malwarebytes] and download the free version of the program. Then after you install it, update it via the link (tab) you'll see at the top and finally run a complete system scan.
It's possible McAfee didn't ask you to disable Windows System Restore. That Microsoft utility which is part of the operating system makes backups of all executables including malware unfortunately.
To be sure, I'd advise you to disable it temporarily by right clicking My Computer, then go to Properties and click the System Restore tab. Then place a checkmark in the box which says "Disable System Restore on all drives" and then click Apply/OK. This will delete all your Restore points, but it's the only way to remove malware which Windows is inadvertently making backups of.
It would be advisable to do that before you run a scan.
Once the Malwarebytes scan terminates and has quarantined anything it finds, you can re-enable System Restore again by removing the checkmark.
Sorry it took so long to respond to your question by the way. -
Mozilla was updating itself and zonealarm wanted me to allow it while I was in middle of a online school test question so I clicked deny just to try and finish the test. This did nothing but keep opening the zonealarm window to see if the update could be done, which I finally did but now mozilla is not working on any websites and i've uninstalled it and reinstalled it and also added the update settings but its not working. passwords and now im basically locked out of them.
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
See also:
*http://kb.mozillazine.org/Browser_will_not_start_up
*http://kb.mozillazine.org/Error_loading_websites -
My computer refuses to access almost any website with a .gov ending?
I have been trying to access numerous government websites for a research project, and my computer will not load almost any website with a .gov ending. Although it will access things like the NIH, the FBI and the CDC, it refuses to acces some of the other main government sites, like the Department of Justice, the Department of Education or other departmental sites. I just tried to load the site on another computer, and it worked. Any ideas what I could do to fix this?
What happens when you try to load this site:
Welcome to the United States Department of Justice -
I am starting to get tired of not being able to use my Firefox web browser because everytime I do, it either opens and doesn't respond or it opens but it doesn't let me access any website or even my bookmarks.
I am having to use Google Chrome (which I do not like) but I can't update anything because I am not using Firefox or Internet Explorer.Hi akadeejay,
probably your Internet security software (firewall or/and antivirus, antispyware) preventing Firefox from connecting to internet, see:
[https://support.mozilla.org/en-US/kb/fix-problems-connecting-websites-after-updating Fix problems connecting to websites after updating Firefox]
thank you
Maybe you are looking for
-
My iPhone 6+ keeps rebooting after installing iOS 8.3
I have a 128Gb iPhone 6+. When I downloaded and installed iOS 8.3 via WIFI, it went through the usual download sequence and then started continually rebooting. After about 20 or so reboots, I got a white screen with a carrier signal on the top left,
-
The Apple ICal program is excellent on Mac and IPad. I was so grateful that I could switch between month, week, day and list views, eliminating my need for any Franklin Covey or Daytimer system. On the IPhone (3GS; OS 4), it lacks the "week" at a tim
-
How to make an ibook a pdf file
for an assessment i have to submit a pdf version of an ibook how to i turn an ibook into a pdf file so i can upload it
-
Jive Forums default username and password
i have installed 11.1.1.4 webcenter version, everything is running fine, but when i am trying to configure dicussions, i need to login http://*.*.*.*:8890/owc_discussions/admin for configuration, but i am not able to login with weblogic/weblogic1 Ple
-
Just had a stick of RAM and the CPU replaced by Apple for an unrelated issue, but now this has cropped up. A little searching indicated that the GPU became unsoldered, but I'm curios if anyone can shed some light on this issue. Thanks.