Everytime I open Firefox - error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again.
Everytime I open Firefox, it shows me a error: "...Firefox could not find your Proxy configuration..." The thing is I'm not using Proxy. Then I go to settings windows, network, put No Proxy, and then everyting works ok. BUT always I open Firefox, it happens again. Help me , Please
Everytime I open Firefox, settings in Network appear: Manual Proxy and shows me a ip number and port
See:
* http://kb.mozillazine.org/Preferences_not_saved
Similar Messages
-
how can I solve this error message? "Some of your photos, including the photo “IMG_0374.jpg”, were not copied to the iPad “(my name’s) iPad” because they cannot be displayed on your iPad."
There were 273 photos in the event syncing from my Mac, but only the last 103 made it to the ipad. Most of the photos were taken by an iphone. I would appreciate any thoughts or insights - thanks.Adrian-
That error message suggests the photo is somehow corrupt.
Do you have the Apple Camera Connection Kit? You can set up a USB thumb drive with MS-DOS FAT-32 format and copy your photos to it into a folder named DCIM. Assuming they have an 8 character plus suffix name, the iPad will recognize them and give you the option of transferring them via the Kit's USB adapter.
Once they are transferred, you can find out if there is a problem with any.
Fred -
The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?
Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden -
In Yosemite, can't login without usb mouse.
Hello jimpetty,
After reviewing your post, I have located an article that can help with Bluetooth connections. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing.
Bluetooth Quick Assist
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I'm using CS6 Extended. My OS is "Windows 7 home premium.
Can no longer load video files into CS6 for edited I keep getting error message:
'Could not complete your request because the DynamicLink Media Server is not available.'
Don't know what this means. Until just now I was able to load videos without any problems. Now I'm getting this message. Any thoughts?Hi Mylenium,
upfront:
I hope I won't be marked as spam now, since I am posting on a few relevant discussions now to this topic.
However, I really would like to ask the people who have experienced this problem to see if they were able to solve it.
Now the real deal:
I posted a question in this discussionDynamicLink Media Server won't let me import video for video frames to layers anymore.
The linked discussion is a lot younger, which is why I posted there first.
I also put in information on the steps that I have tried and my computer specifications.
I am experiencing this problem for a while now and hope you and jones1351may be able to help out. -
Tried to "Open As" in PS a NEF file I modified in LR. Got the following error message: "Could not complete your request because the file format module cannot parse the file." I can "Open" the file in PS, but then the changes I made in LR (and saved in the associated meta data file with the "Control S" command) are not applied to the opened PS file. HELP!
If you are working with a file you modified in Lightroom, you should go to the Lightroom Photo menu and choose Edit in... and the version of Photoshop you want to open it in.
There a dialog will ask if you want to transfer the LR settings you made to your photo when you open in Photoshop.
Gene -
hi,when ı work on photoshop suddenly my computer restart but i have saved my project before restart.and when ı want to open my psd , photoshop alert me with this messagge ;Could not complete your request because the file is not compatible this version of photoshop ..ı tried all versions but cold not open again.there was a very ımportant work for two days.can you help me please?
tworules wrote:
…photoshop need a recovery or auto save system.
tworules,
You haven't mentioned the exact version of Photoshop you are running. As the always helpful and knowledgeable JJMack told you, new versions of Photoshop do have auto save and recovery when enabled in your Photoshop Preferences.
However, no auto recovery and/or autosave is a match for a defective machine. As suggested by Mr. Cox, you should do a thorough inspection of all your hardware ASAP. -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please helpCR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras -
iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want?
Message was edited by: WoildbillI just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
This is how I did it on Windows 7 with iTunes 10
1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
Example: C:/Users/Woildbill/My Music/iTunes/Music
2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
Hope this helps! -
Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D
sounds like the cable or the iphone connector are somehow damaged
-
I use iPhone, iPad and MacPro, all works fine but the newly purchased iMac does not receive emails on time - always later than other devices. Why and how to fix?
Go to Mail Preferences
Click on the General tab
Set "Check for New Messages:" to "Every Minute"
Hope this helps -
I haven't used my IMac in a long time and went to boot it up, and I find I don't remember the correct username and password (I use several computers..I try to keep the passwords similar, with a number for the chronological order in which I started using them) I've tried all the others I use for passwords. The 'hint" keeps coming up for the password I am pretty sure is the correct one, but, still cannot get in. I also don't remember whether I changed my surname on the computer...it was changed legally a little while ago, but some of my older devices still have my birth-name in there)
HELP
I don't think I ever set up a "master password" on the thing...I never use those. I am the only person with access to my personal devices.
thanksForgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password,
OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself
Reset OS X Password Without an OS X CD — Tech News and Analysis
How To Create A New Administrator Account - Hack Mac -
why cant i open all my bookmarks in a new tab? only the ones visible above me, not the ones that show up when i click in the arrow to the upper right?
Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
Hi all,
I am having some serious issues with Photoshop CC and have alread lost a few days of work to a random bug. I have spent the whole day working on Photoshop to try and catch up on the lost work.
I was saving the PSD, closed the document and then tried to reopen it to make a quick change and I got this error: "Could not complete your request because the required resources were not found.". I am now unable to open the PSD.
Has anyone ever seen this and does anyone know if there is a way of resolving the problem?
Any help would be much appreciated.
Cheers
LeighI found a hack-y way to work around this problem without losing work!
So I discovered fairly quickly that this is an unsolved problem that NO ONE can explain the cause of. Here are step-by-step instructions on how to save your layers without losing progress.
Convert ALL of your layers to a Smart Object.
Right-click on the Smart Object
Click "Export Contents..."
This opens up a Save As... Window, with your file name .PSB
Name & Save.
I then quit Photoshop CS, re-opened, and had all of my layers, folders, and effects intact. The only problem was that my Canvas was as large as my biggest layer (extending beyond my original canvas). Just find the original background layer (or one that originally filled your canvas), Select it (Command + Click on the Layer thumbnail), and Crop it (Image > Crop).
Hope this helps.
Maybe you are looking for
-
Create error email if message fails
Hi We would like to implement a scenario where we can receive an email error message if one our messages fails somewhere during its processing. Is there a way to do this in BPM? Basically we dont want to have to keep checking the AdapterFramework or
-
I have a pdf ticket application document to which I have added some form fields (using acrobat x pro) The document seems to work as expected, so I uploaded it to my site. When I open the pdf document in chrome, the form works ok, but the tooltips do
-
Upgrade from Mac OS X 10.6.8 to Snow Leopard
Ok, it's true - I haven't upgraded my laptop in a LOOONG time. I have Mac OS x 10.6.8 and I was told I needed to upgrade to Snow Leopard 10.6.3. But whenever I try it, my laptop just turns off and restarts, I get the gray screen with the apple but th
-
Performance on 1.5GHz PPc G4 & 1.6GHz PPc G5?
Hi, I have Aperture at home and it runs brilliantly on iMac 2.16GHz with 2.5 gigs of Ram. I am putting forward proposals at work for software and Aperture is high on my list but how will it run on a 17" PB 1.5GHz PPc G4 and 1.6GHz PPc G5. Both only h
-
I got the windows server 2012 evaluation version online(Windows download page).I have an old window 98 around.I was thinking is i can change it into a server for our home.