Everytime I open iphoto, my computer tells me A photo has been found in the iPhoto Library that was not imported.  Would you like to import it.  no matter what I do, iphoto puts the pic in recovered files.  How do I fix this?

Everytime I open iphoto, my computer tells me,  A photo has been found in the iPhoto Library that was not imported.  Would you like to import it.  If I import it, a message comes up Unreadable file, the following file could not be imported. them it tells me where the file is and it cannot be opened.  If I do not import, then it says,The photo has been placed in the folder /Users/patrick*******/Pictures/iPhoto Library Recovered Photos_4.  It will just keep adding to recvovered photos.  This drives me crazy!!!!!!!  How do I fix this?

I had this problem some months ago and the following solution from Terrence Delvin put things right:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.
However, since connecting a memory stick to my computer, I now have the same problem again.  This time there is no folder called 'Import' or 'Importing' so what should I do?

Similar Messages

  • A photo has been found in the iphoto library that has not been imported???

    When i open iphoto i get a message saying "a photo has been found in the iphoto library that has not been imported, would you like to import it?" I have tried what everyone is saying to do, but when i look under show package contents there is no import folder to move. only a folder that says contents and i've looked all through that, still no import folder. Even though i click no i do not want the photo imported it still is stored on my external hard drive and every so often i have to go delete TONS of photos and when you click on the photo it doesn't even actually show up as anything.

    but when i look under show package contents there is no import folder to move. only a folder that says contents
    You're looking at the iPhoto.app package. Those instructions are for the iPhoto Library package. That's in your Pictures Folder.

  • A photo found in the iPhoto library that was not imported

    Every time I open iPhoto, I receive a message saying "A photo has been found in the iPhoto library that was not imported. Would you like to import it?" If I select yes, a box pops up saying "Unreadable file. The file was not imported, the file was missing." and then the photo's path. If I select no, the photo gets placed in a recovery file. I can see the photo in the recovery file, it is a photo that I locked (and maybe marked hidden - if you can even do both). I've tried to go into my iPhoto and unhide photos so that I can unlock the original...I've also tried unlocking the photo in the recovered file. I've tried deleting the photo in the recovery file as well...I can unlock it in Finder and delete it, but (with my limited knowledge of computers) I've determined that I must only be deleting a copy. Where is the original...I'd like to delete it. I don't even need this pic anymore and it is SERIOUSLY IRRITATING ME every time I open iPhoto. And that's often, as I'm always taking pics of my little one. TIA!!!!! Sara

    Sara
    Welcome to the Apple Discussions.
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    Regards
    TD

  • IPhoto, "A photo has been found in the iPhoto Library that was not imported

    A photo has been found in the iPhoto Library that was not imported. I click no or yes and I receive a message... The photo has been placed in the folder /Users//Pictures/iPhoto Library Recovered Photos_11. what do i need to do to stop this???

    Welcome to the Apple Discussions.
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for a Folder called 'Import' or 'Importing'.
    Drag it to the Desktop. *Make no other changes*.
    Start iPhoto. Does that help?
    If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.
    Regards
    TD

  • Every time I open Iphoto I get the following message:  "A photo has been found in the iPhoto library that was not imported.  Do you want to import it?  Yes or No"  Any suggestions?

    Every time I open Iphoto I get the following message:  "A photo has been found in the Iphoto library that was not imported.  Does anyone have any suggestions?

    Quit iPhoto and to to the iPhoto library (by default in your pictures folder) - right click (control click) on it and select show package contents - find the folder named import (on importing) and drag it to the desktop - DO NOT MAKE ANY OTHER CHANGES - launch iPhoto and you will be fine.
    Open the import(ing) folder and if there is nothing in it that you need move it to the trash and empty the trash
    LN

  • When I update itunes it deletes the library file, and when I restore that file from the previous libraries or my backup, itunes will run but tell me "the iTunes library file cannot be saved. A folder was specified instead of a file" How do I fix this?

    When I update itunes it deletes the library file, and when I restore that file from the previous libraries or my backup, itunes will run but tell me "the iTunes library file cannot be saved. A folder was specified instead of a file" How do I fix this?

    Hi there Br0x,
    You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/ht1451
    -Griff W.

  • Can not open dreamweaver due to missing menu.xml file, how do I fix this problem?

    Can not open dreamweaver due to missing menu.xml file, how do I fix this problem?

    @alicia - We have seen such issues before
    Allow me to quote David Powers from http://forums.adobe.com/thread/1192197
    The menus.xml file is normally in your personal configuration folder. Before going to the trouble of reinstalling, try deleting your configuration folder. Details of how to find it are here: http://forums.adobe.com/thread/494812.
    When you launch Dreamweaver, it should build a new configuration folder.

  • I have downloaded several times now,but i get the same error message 'corrupt file ' how do i fix this?

    i have downloaded and uninstalled firefox several times now,but i get the same error message 'corrupt file' How do i fix this and i also go to the home page to download as well as others,i have also tried downloading to my laptop the same amount of times and i get the same error message :( very unhappy

    Set Windows Defender off and try download again from here:
    http://www.mozilla.org/en-US/firefox/all.html
    If this does not help see here:
    [https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files Unable to download or save files]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • HT1386 Hello, When trying to sync, I get the following message.  This computer is no longer authorized for apps that are installed on the iPhone "Terri George's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

    while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?  When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50).  Would love to sync today.  Any help would be appreciated.

    The -50 error is documented in this article:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    Here is a synopsis:
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.

  • HT1476 Dear all, I have a problem with charging. When i intend to charge my phone while its on, it does not charge. However, If i were to switch it off and put for charge, it charges. How do i fix this?Help.

    Dear all, I have a problem with charging. When i intend to charge my phone while its on, it does not charge. However, If i were to switch it off and put for charge, it charges. How do i fix this?Help.

    First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

  • I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?

    I have recently updated the operating system on my iPad. Now my alarm is silent and my FaceTime doesn't ring aloud when a call comes in. How do I fix this please?

    Do you see a half moon icon in the upper right corner of the screen? If so, you have Do Not Disturb enabled. Settings>Do Not Disturb. Turn it off.
    Or do you have system sounds muted?
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the control center. Swipe up from the bottom of the screen to get to control center. Tap on the bell icon and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
    This support article from Apple explains how the side switch works.
    About the iPad Side Switch - Apple Support

  • I downloaded the Final Cut Pro X trial but my movie is 17 minutes long but it will only Share to Quick time 6:55 minutes. How do I fix this and export the full 17 minutes?

    I downloaded the Final Cut Pro X trial but my movie is 17 minutes long but it will only Share to Quick time 6:55 minutes. How do I fix this and export the full 17 minutes?

    Thank You. Im trying to export everything. I pressed command A and then did the Share button. Ill attach the screenshot please let me know if I need to change something.

  • The auxillary jack on my Itouch does not allow sound to come through with headphones, though it works in a dock as well as external speakers.  How can I fix this?

    The auxillary jack on my Itouch does not allow sound to come through with headphones, though it works in a dock as well as external speakers.  How can I fix this?

    You can try the standard fixes of reset, restore from backup and restore to factory defaults to rule out a hsoftware proble.  Frequently it is to to a problem with the eadphone jack and the solution is to replace the jack.

  • Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time.

    How do I eliminate this glitch?  Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time. I tried double-clicking the Home button which brings up all of the active apps, touched and held the Music icon until all the icons started wiggling, tapped the Close icon in the upper left corner of the Music app to close the app completely, but the app is still open and still randomly stuttering. I did notice that the play button icon flashes in the upper right corner of the screen when this happens and it appears and disappears in concurrence with the Music app stuttering. When the music starts, the icon appears and when it stops, the icon disappears again. When the music stutters on and off, the icon appears and disappears rapidly and in sync with that random glitch. This just started today for no apparent reason. I turned the iPad off, waited 30 seconds and turned it back on. As soon as it was finished starting up, the same music glitch began again immediately. I'm using iOS 6.1.3.

    Well, no one seems to have any answers or ideas for me, I'll update what I've been able to accomplish.
    I reloaded all 14 disks in the time frame of watching Lord of the Rings on Fri. nite.
    Funny thing is, the first disk pulled the info from the online store! Hooray!
    Wait-then all the next 13 could find no information online...what the heck is up with that? So I MANUALLY assign each disk a new track # to co-inside with each disk, spent about 2 hours doing that.
    But still, itunes tells me my playlist is too large, there's not enough space on the ipod. so I unchecked 1 1/2 disks (I'd listen to 1/2 of disk 1 previously) and voila! there's my ipod full of my book. Finally. But what a lot of bother just to keep things in order!

  • My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????

    My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????

    It seems Apple is having some issues at their end. There have been hundreds of posts on the forum with the same problem.

Maybe you are looking for

  • How to write text  on the selection screen of a  report

    Hi all, I need to write some user defined text on the selection screen of an ALV GRID Report. Please suggest me how can i do this Thanks Ajay.

  • Vender oppening balance

    Hi all, Plz tell me logic how to calculate Opening balance and Closing balance of vendor of any particular date of month........... Thanks in Advance.

  • HELP! Can't drive tv with Video adapter

    Just bought the DVI to Video Adapter (M9267G/A) and tried to drive my TV using both an S-video and Composite video cable. No joy. I followed instructions on apple site: hooked up tv to adapter (it is on) and only then, hot-plugged the adapter into th

  • How to create a new user

    Hi, I need to script the process to create an user and grant privilege to this user. I know the commands i need to do from sqlplus such as: CREATE USER trade IDENTIFIED BY trade;. GRANT resource, connect , create session, create table, create procedu

  • Blu-ray ROM

    I have an HP pavilion dv2000 and I need to replace my rom drive.  I tried searching online but can only find a compatible blu-ray drive on a shady website.  Can anyone help?