Everytime I open my iTunes it says "Running iTunes in 64-bit mode requires Mac OS X 10.7 or later" how do I fix this?
Everytime I open my iTunes it says "Running iTunes in 64-bit mode requires Mac OS X 10.7 or later" how do I fix this?
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.
Similar Messages
-
i was trying to download latest version of itunes and my computer is saying software requires mac os x 10.6.8 or later. how do i fix this?
The latest iTunes which is 10.7 does indeed require Mac OS X 10.6.8 or newer. What version of Mac OS X are you running and on what model Mac?
-
I upgraded my 4s to 7.0.4 and now I can't acicess hotmail through my main mail app. When I open it a pop up says password incorrect even after I put my password in it pops up again. How do I fix this please help
After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed. -
I all ready installed itunes to my pc, which is a windows 7. It says it syncs, but it doesnt transfer nothing from my iphone to the computer. How can I fix this issue
And it won't by design and intention since you are not syncing your iPhone with your iTunes library on your computer.
If you have authorized the computer with your iTunes account with iTunes, with your iPhone connected - at the iTunes menu bar go to File and select Transfer Purchases From - the name of your iPhone.
For contacts and calendar events, is Outlook 2003, 2007, or 2010 available? -
My QuickTime player us not playing .avi files and says I need a codec I can't play no .avi files on QuickTime. How could I fix this because I want to play these files with QuickTime.
Hmm . . . comes with a Utility MPEG2 Component ML app with no explanation of what it's for?
The utility app is an "assistant PKG installer." It allows Lion and Mountain Lion users to install the older QT MPEG-2 Playback Component installer PKG file which is not allowed to run on its own under Lion or Mountain Lion since these operating systems already have a QT X only MPEG-2 component embedded in the QT embedded structure. Without this utility you would have to either copy the component from an older system to your Lion or Mountain Lion system, use Pacifist for installation, or manually open the PKG contents and transfer the component to the appropriate component folder.
As to your "discussion" regarding the playback of AVI file types, there are really only two strategies here:
1) You can add component support so that QT can play the files natively or
2) You can convert the file contents to compression formats that are natively compatible with the unmodified QT component configuration.
Each user should decide for his or her own self which approach best suits their needs for a particular source file. In most cases, conforming the system's codec component configuration to play the source file directly results in higher video quality since no transcoding takes place but this strategy will not work if a codec which is required is not available for the user's operating system. On the other hand, converter utilities tend to support more built-in codecs and are easier to use since the user does not have to concern him or herself with the nature of the particular source compression formats but at the risk of some potential loss in visual quality. As to what converter to use, once again this is a matter of personal choice. In the case of commercial converters like iSkysoft, the codecs are built in while MPEG Streamclip accesses the host operating system's QT codec component configuration. I personally prefer the free HandBrake app for AVI, MKV, TS, MTS, and M2TS conversions since it has an exceptionally full-featured X.264 GUI with some user options that 97% of users are likely to never use. -
my i tunes account says that my apple id has been disabled whenever i try to make a purchase how do i fix this problem?
Depending on why it's been disabled, you might be able to re-enable it via this page : http://appleid.apple.com
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ -
I put songs onto my IPhone 4, and they show up under the "On This Phone" section in itunes, but when I go to play the songs on my phone, they aren't there. How can I fix this?
When you look at your iPhone, are you looking in the Music app or in the iTunes app? Be sure you are looking in the Music app, and look in the Songs category. If your songs are not here, you may want to try syncing your information again through iTunes. To do this, uncheck "Sync Music" and then click apply or sync in the bottom right corner of iTunes, and then recheck "Sync Music" and then click apply or sync again.
I hope this helps! -
My Seagate external Hard drive is saying that it is damaged I have another hard drive to transfer everything to but how do I fix this one?
You may not be able to fix it.
Some data recovery tools are non-destructive in their data recovery methods:
https://discussions.apple.com/docs/DOC-1689 -
ipad is asking for a passcode which I never installed. iPad is now disabled. Tried syncing to itunes with my mac book pro, won't sync. How do I fix this?
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
hi, when i am sync my books from my mac to ipad even after 24 hours sync, itunes show "wait for items to copy" and the books in ipad are still not fully loaded.
how do i fix this, i have a large collection of books around 12000 booksNobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance. -
I sold an iPhone 4 and the person i sold it to says he can't setup the phone cause it's still registered to me. How do i fix this?
Go into iCloud on your computer and turn off Find My iPhone for the one you sold.
-
I get a 404 error when accessing my website which is supported by Apple. The message says that the server can't find my page. My browser is Safari. How can I fix this?
If you uploaded to MobileMe, it's no longer available. Apple's closed MobileMe and stopped offering web hosting.
(116252) -
I have an ipod touch 4th generation and when i try to sign up for imessages or facetime it says that it is unable to verify email because it is already in use. How do I fix this???
If this is the problem following the instruction. Frequently it is a hardware problem.
iOS: Wi-Fi or Bluetooth settings grayed out or dim
Otherwise try (assuming that other devices see your network)
- A reset. Nothing wil be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power of and then back on your router.
- Reset network settings: Settings>Genral>Reset>Reset Network Settings
iOS: Troubleshooting Wi-Fi networks and connections -
My pictures are saying delivered when sent through iMessage but the person isn't actually getting them. How do I fix this?
My pictures send through iMessage only to certain people. And others the message is saying " delivered" but the person on the other end isn't getting any of my picture messages and sometimes regular iMessages with no pictures.I was sure this curse was an Android feature since I had it constantly with my Nexus phones for the last two years, but sure enough it affects iOS8 too. Turn off wireless and and your MMS will go out fine over cellular ever time (in my experience anyway). Ridiculous, right?
-
My MacBook will not turn on unless it's connected to a charger/power source. However, when it is on and charging, it says that it has 0% battery life despite the green light on the charger. How can I fix this?
Your battery has reached the end of its life. If you have a MacBook with the removable battery you can get a new third party battery fairly cheap on eBay.
Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
Or for $129 from Apple http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
Maybe you are looking for
-
Stuck Outbound Queues in CRM system
Hi Guys, In CRM system the out bound queuse for the Sales Orders got stuck with the following error "Too many recursive subroutine calls" The Sales Orders are not getting replicated from the CRM system to R/3. The business partners associated with th
-
New Zones features in Solaris 10 Beta 5
Solaris 10 Beta 5 (otherwise known as Software Express 7/04) should be available shortly via the download link http://wwws.sun.com/software/solaris/solaris-express/get.html For more information on what's available in the release, please see the alrea
-
How to accout unplanned depreciation for group assets
Friends, Unplanned depreciation is accounted for group assets few years ago.This is for special depreciation areas. Now i would like to reverse this amount as write up unpalnned depreciation, but system is throwing eror message that: This function
-
WHY DOES MY ANTI VIRUS TELL ME FIREFOX IS USEING TRACKING COOKIES ???
TRACKING COOKIES ? DOES FIREFOX USE THEM OR NOT ?? MY ANTI VIRUS SAYS YOU DO ! I AM USING AVG SBS EDITION
-
Hi all! I have a UMAX Mac Clone S900 which is essentially a Power Mac 9500, Machine ID 67. Installed is a Sonnett G3 processor card running at 470 MHz. I have tried to install OS 9.2.2 but get a dialog which states that it can not run on this machine