Everytime I set up my macbook as a wifi hotspot it closes the connection on my macbook. Why does that happen?
Everytime I set up my computer as a wifi hotspot it closes my computer's internet connection. Why is that happening? And What can I do?
With a Thunderbolt to Ethernet adapter in use, your MacBook Pro's Network Preferences should be similar to this:
"Status" should be "Connected", a valid IP address should appear, and you should be able to load web pages. Make that work first.
Then make your MacBook Pro's Sharing preferences resemble this:
Essentially: "Share your connection" and "To computers using" should be as shown above.
The MBP's Wi-Fi icon will be as shown below:
To other client devices, the network they join should be the name you designated. It will appear in the same manner as any other wireless network.
What are you seeing that's different than the above?
Similar Messages
-
The RAW files I just downloaded on new MacBook Pro are designated as JPEG in the photo info box. Why??
How did you download? Have you been using the Import panel?
How is the pop-up selector for the "Raw+Jpeg" set?
If you are importing raw+jpeg pairs, and you set this to (Use Jpeg as original), then you will see a little J on the thumbnail, otherwise a R.
Or did ou import with Jpeg only? -
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
I am having trouble transferring files from an old MacBook (2007) to a MacBook Air over a wireless network. The connection was interrupted and the time was over 24 hours. Is there a better way to do this? I'm using Migration assistant. The lack of an ethernet port on MacBook air does not help.
William ..
Alternative data transfer methods suggested here > OS X: How to migrate data from another Mac using Mavericks -
by mistake i erase my macbook pro hard disk how to reinstall the yosemite on my macbook because it donsnt read the bootable drive?
usamafrombeverly hills wrote:
when i start the macbook & press cmd+R it goes to the internet recovery
Well then when you erased your hard drive, your erased the Recovery partition, also.
Use Internet Recovery to either restore from your Time Machine backup or reinstall the OS if you don't have a TM Backup.
It will install the OS that shipped on that Mac. You can then upgrade via the App Store. -
My iphone 5 everytime i go into mail it comes up with - Cannot get Mail - the connection to the server failed- i then have to click ok - I am still receiving mail - it is driving me mad having to click this everytime - anybody else had the same problem and have found a solution - only stated happening since iPhone was updated .
Hello there, Badboymbc.
The following Knowledge Base article provides some steps for troubleshooting mail on your iOS device:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
Hi everybody!
I send program change messages from my midi controller and the messages are accepted by mainstage 3 as shown in the midi message window,but i can't make a selection of my pathes even if i have set a program change number for each patch.Why is that happening?
I use a novation SL mki or a KORG Triton Le or a m-audio axiom 49 as midi controllers.The program change messages are transmitted by all the devices i mentioned above and shown as received in the midi messages window of mainstage 3.
Has anyone the same experience?Hi
Have you selected the correct device as the Program Change device and MIDI channel in the Concert Inspector?
CCT -
While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.
The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
Good luck,
Clinton -
When I close the lid on my MacBook Pro the print on thunderbolt screen is very small & hard to read. If i keep the lid open on the MacBook Pro the print is big and easy to read. How do I prevent this from happening?
Hi JanStran,
You may need to check your Display settings and/or resolution.
The article below explains how to used Clamshell mode "closed display" on your Macbook Pro, versus "mirroring."
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
Hope this information helps ...
- Judy -
The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?
I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex -
MacBook Pro shuts down when i close the lid
Hey,
My MacBook Pro shuts down when i close the lid.
It started to do this one or two times, but now it is every time.
I have the latest battery update, so this should not be the issue here..
Any sugestions??
I have started to suspect the it might be some faulty conecctions or somthing..If it's unable to go into the proper sleep state for some reason then it will do that.
Run /Utilities/Console and click 'All Messages' top left then close the lid, wait a minute then open it again - if it's shut down then reboot and open Console again and check the latest log lines looking for 'sleepimage' - it should give you an indication of what happened/didn't. If you're not sure what it all means post _just those lines_ here. -
I would like to run a stock analysis program called Toolkit 6 on my Macbook Pro, but it only works on the Windows platform. Is there software that allows me to run Windows applications on the Mac?
Yes it's MS Windows! You will need a license of MS Windows (preferable Windows 7) and from there you can decide on the strategy for running Windows on your iMac. You can use Boot Camp (you already have this) or you use virtualization software such as Parallels or Fusion. For your situation I'd recommend virtualization software. However for only one program I'd do some due diligence to see if there is a OS X version. You can start with the App store or simply use Google to search.
Kappy has provided a good article on running Windows on a Mac and the various options. Here is the link:
Kappy's explanation
Roger -
Can I keep my MacBook Pro from sleeping when I close the lid?
Is there a way to close the lid on my MacBook Pro without putting it to sleep so that it will continue to play music via USB to my stereo?
I want to use my Macbook Pro to play music on Amarra or iTunes via USB to a DAC connected to my stereo. The MBP will be on a shelf in my stereo cabinet where the lid cannot remain open. I do not wish to connect an external mouse, keyboard or display to the MBP. Is there a way to keep playing the music with the lid closed?
Thanks.... and there's this:
Apple Portables: How to use your computer in closed clamshell ... -
I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results! Can you help?
Error message as above and below:
'Send Message Error
The message could not be sent because connecting to SMTP server mail.btinternet.com failed.
The server may be unavailable or is refusing SMTP connections.' (etc.)
BT won't deal with this - they redirect me to a 'partner' who want to charge to discuss the problem. Nice, eh!
Maybe you are looking for
-
What is access sequence tables and how to use them in program?
hi all, I know a little about SD and access sequence tables, but I get a requriment like this: condition type is a paramater The condition types allowed in this report are: Note: A list of pre-defined condition types with their corresponding access s
-
Warning: xf86-video-nouveau 0.0.15_git20100117-1 may rename outputs
After this nouveau update, when I next started X, I no longer had two monitors side-by-side, but instead had them in mirrored mode. A little investigation showed that my outputs were renamed: DVI-I-0 -> DVI-I-1 VGA-0 -> VGA-1 This broke my xrandr con
-
Write statement after alv display
Hi Experts, My requirement is that i am displaying an output of ALV List display, in the List display i have a button which undergoes updation of records in Ztable.After pressing the button now i have to display Total no of record
-
Adding Letterbox to odd sized file
I have a movie that is 704 x 304 px I need to add a letterbox so that FCP will read it. The file is also 23.978fps which FCP is not accpeting, no matter if I change the sequence settings. How do I add a letterbox that will preserver the 704x304 video
-
Hi guys! Does anyone know how i could get the page to load from the bottom instead of top? i'm planning a "reverse" parallax page in which the user would scroll up from the bottom instead of down from the top. Thx