Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Update your HP Printer drivers/software at their website or uninstall using the developers method.

Similar Messages

Help!! Can someone help me with this message I keep getting before startup, please ?? Here it is: "/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings. Help!?!?

Hello:
I keep getting this message upon startup. Can't figure out how to address it. Here it is.
"/Library/Startupitems/Intego Backup Manager Pro" has not been started because it does not have the proper security settings.
Any suggestions?

There's an invisible one name "Icon" according to the error message.
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.
First, make invisible files visible. Find the invisible file in that folder and remove it. Please be sure you are looking in the /Library/StartupItems/ folder. There is another one in the /Home/Library/ folder. Be sure you look in the right one.

Error message: ""/Library/StartupItems/IntegoCommon" has not been started because it does not have the proper security settings."

I recently got a new Macbook Pro. I transferred my info from my old mac. Now when I startup my Macbook Pro, I get this error message "“/Library/StartupItems/IntegoCommon” has not been started because it does not have the proper security settings." I have run Disk Utility, but nothing has changed.
Thanks!

Uninstall any Intego junk according to its instructions and ensure that all its components have been completely eradicated from your Mac. You may need to download Intego's installer so that you can run its uninstaller.
Intego will make your Mac run very poorly, unacceptably so. Never install such junk on a Mac.

I am facing with the following problem whenever i start my laptop.Insecure Startup Item disabled."/Library/StartupItems/MobileBrServ" has not been started because it does not have the proper security settings.

I am facing with the following problem whenever i start my laptop(Macbook Air,OSX 10.9.4).
Insecure Startup Item disabled.“/Library/StartupItems/MobileBrServ” has not been started because it does not have the proper security settings.

Open /Library/StartupItems/ folder and locate the file then remove it. You have installed incompatible software. If you don't believe this is correct, then determine what software installed the item and contact the developer for help.

How do I deal with "StartUpItems if2k" has not been started because it does not have the proper security settings?

Whenever I turn on or restart my MBP, a dialog box appears saying --> “/Library/StartupItems/if2k” has not been started because it does not have the proper security settings.
How can I fix this?
First, I searched online and found a site with a If2k_Remover_V2.zip file, but whenever I try to open the link, a page comes up saying,
Forbidden
You don't have permission to access /w/files/if2k/If2k_Remover_V2.zip on this server.
Any thoughts on this?
Also, I see the if2k folder in the Library/StartUpItems; is it something I can just drag into the Trash? Or would that be a bad move?

Did you ever figure this out? I just upgraded to Lion on my Air and I have the same issue.

When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor. How do I fix these?

When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?

Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

What to do when you encounter "does not have the proper security settings

What to do when you encounter: /Library/StartupItems/Qmaster" has not been started because it does not have the proper security settings. AND......../Startup Parameters.Plist ?
I have a PowerMac G5 using Operating system 10.6.8
I took this mac to the Apple store, they reset my os software and I have been having problems eversince. Since this Mac weights about 50 lbs, I don't want to take it in a gain. But - I am 67 years old and don't really understand some lingo - so straight english would really help.
I so appreciate any help I can get.

>>I have no idea what all that means...
rwxrwxrwx root admin
It shows that the files are owned by 'root' & in the group 'admin', while being readable (r) , writeable (w) & executable (x) by user:root, group:admin and everyone else.
Startup items must be owned by root, the group must be wheel, and they must only be writeable by root.
You can't readily make the required changes via Finder, so you'll either need to reinstall the software that added them, remove (trash) them altogether (they start qmaster, used by fcp &/or compressor) or use Terminal & the 'sudo' command to alter the ownership & permissions.
If you choose the latter - run these two commands in Terminal while using an admin account, you'll be asked to enter the admin password, which won't be echoed onscreen. Restart afterwards. It's important that you copy/paste these exactly.
sudo chown -R root:wheel /Library/Startupitems
sudo chmod -R ugo+rwX,go-w /Library/Startupitems
However - your startup problems with the prohibited sign are unlikely to be resolved by this, although it should avoid the warning messages you describe.
When did the startup problems begin - after adding any new software or making other changes ?.

Everytime I start up my macbook pro get error message Insecure Start Up Item Disabled /Library/Startupitems/HPTrapMonitor has not been started because it does not have the proper security settings

everytime I start up my computer I get error message
Insecure Start-Up Item Disabled
"/Library/StartupItems/HPTrapMonitor" has not been started because it does not have proper security settings

Hope info from this article helps.
http://support.apple.com/kb/TS3493
Best.

How do I get a rid of the error message "Insecure Start-Up Items folder detected because the folder does not have the proper security settings?

I recently upgraded my OS from 10.4.11 to 10.6.8, so that I could download iTunes to my new iPhone 5. After upgrading to 10.6.8, I received error message about my Symantec Norton anti-virus security, so I upgraded that to security that's compatible with 10.6.8. Now I receive the error message above, about my Start-Up Items folder. There are currently no items in the folder. How do I get rid of the error message above? Thanks for any help.

Hello,
Resolution:
To prevent the "Insecure Startup Items folder detected" message from appearing
Open Disk Utility from /Applications/Utilities.
Select the name of the volume where Mac OS X is installed (default name is "Macintosh HD").
Click the Repair Disk Permissions button.
After permissions repair is complete, restart Mac OS X and verify that the message no longer appears.
http://support.apple.com/kb/TS3493?viewlocale=en_US

MacBook Pro user gets this message "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes."

Hi, I am a MacBookPro user (10.6.8). When I tried to open my iTunes, it says "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." I really dont know what to do, I would be glad if you could help me.

All you have to do is download iTunes again, run the installer, then trash the installer.
See this Apple doc for step-by-step instructions -> Troubleshooting iTunes installation on Mac OS X

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

I bought a macbook pro on november 2011 wich had Lion OS installed on it. Playback plug-in in Mainstage 2.1.3 does not play files from the beginning (it leaves out like 50 mSecs or so). Is there a way to revert to Snow Leopard OS?

BrettGoudy wrote:
...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
As the last post suggests, call Apple and order a replacement original disc for about $17. They will ask you the model and serial numbers.
Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

My laptop macbook pro with maverick was working well with AVERTV VOLAR a dongle to capture tv programmes but now with yosemite it does not recognise what options I have

My laptop with macbook pro with maverick was working fine with a dongle AVERTV VOLARGO to capture tv programmes but now with yosmite it does not recognise what options have

I also understand that there is particular software 'TRIM' a software introduced by CINDORI SOFTWARE which will disable KEXT SIGNING a security application of YOSEMITE ,Is it the only option or there are any better options for this

When I start PS Elements 11 editor, I get this message: "This program can't start because MSVCRT10.d

When I start PS Elements 11 editor, I get this message: "This program can't start because MSVCRT10.dll is missing from your computer. Try reinstalling this program to fix this problem."
When I try to dismiss the error dialogue box, the message reappears immediately and the program does not load. After dismissing the dialogue 8 or 10 or 12 times, the editor finally loads and everything works okay.
How may I solve this frustrating problem? I've already uninstalled and reinstalled the program and that hasn't solved the issue. If I need to add a .dll file to my machine, where do I locate it and where do I place it on my computer?
Thanks
William Driver

Using Holmesian deductive skills and Spadian investigative techniques, I discovered that the problem lay in a third party filter application. I determined that since the program gave me the error message when PSE 11 began its scan for filter plugins, then the problem might lie there. I removed the filter plugins from the program's 'Plugins' directory to a another folder and added them back one by one until I got the error message. Sure enough, I eventually located the faulty plugins and removed them. Now PSE 11 loads without a problem.
Thanks for your help.

Does anyone have the current apn settings?

I installed a 3rd party sim card for use in St Thomas. I put my orginal Verizon sim card back into the phone but the APN settings did not return. I did not record these setting before using the 3rd party sim card. Does anyone have the current apn settings?

Thank you very much!
Best, tom
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Start up disk full, I keep getting this message, what do I need to do to fix it?

Help please. I keep getting this message, the start up disk is full. What do I need to do to fix this?

You have 39000 pictures? Yeah, that could do it. lol.
Get an external USB hard drive and move some to that. You can pick one up pretty cheap at Best Buy. Your other option is to put a bigger hard drive in your MBP, but you don't say which one you have so I can't suggest what might do it for you. If you click the Apple, then About This Mac, then More Info, then System Report, you'll see a line that says "model identifier". What is it?
Then go down to SATA / SATA Express in the left column and click it. On the upper right it'll list some things. Click on the second line then look on the lower right. What does Capacity say?

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Similar Messages

Maybe you are looking for