Everytime I synchronize my iPod nano, the error 1413 is reported.
that wasn't the first time that this happened. what's wrong with it? what can I do?
please help me! (sorry for my english, i'm german.)
Error 1413 when Updating or Restoring an iPod - Support - Apple
Hope this helps.
Similar Messages
-
I have a MacBook with Snow Leopard 10.6.8 and iTunes 11.0.1. When I tether my new iPod Nano, the icon shows up on my desktop, but does not show up under devices in iTunes. The Nano says it is connected and synching, but I cannot download music if it doesn't show up under devices.
Hi,
Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks. -
have erased my ipod as i am selling it on. I wanted to check all my stuff (pictures, notes ect) had been erased, but everytime i plug my Ipod into the computer it isnt recognized. it says plug into Itunes, and i have. Nothing happens. what do i do? HELP
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
Everytime i connect my ipod to the computer, itunes says that this ipod cannot be used because the apple mobile device service is not started, what should i do?
See this article for how to restart this service.
http://support.apple.com/kb/TS1567
B-rock -
Why is there a clicking noise in my ipod and the error message keeps coming up
why is there a clicking noise in my ipod and the error message keeps coming up i tryed reseting it and it wont do anything
Video conversion - Handbrake
Video Conversion – Video Converter
Video Conversion – Video Converter Ultimate
Video Conversion – Video Mate -
Is the iPod nano the only iPod with an FM radio receiver??
is the iPod nano the only iPod with an FM radio receiver??
You can check for yourself over on Apple's own website - http://www.apple.com/ipod/
-
IDVD 4 Error Message: The error #-1 was reported-
I am an old hand at making and burning DVDs. I've converted VHS tapes onto almost 600 DVDs. Recently I upgraded from OS 10.2.8 to 10.5.1. In the process I messed up and had to reinstall OS 10.2.8 on a different internal drive. Since then I have not been able to burn any DVDs. My latest try ended with, Errors were found in the burning process The error #-1 was reported…
I've been searching the web for an hour looking for a list of error (I assume iDVD errors) with no luck. I found a programmers page -- NO VALUE. On this massive web someone must have an error code list that tells me what to do.
Like: Error #1, Bad Media Error #2, Lost sync try again Error #-1, tough luck start from scratch
Does anyone know of such a list?Hi
MAIN GUESS: iDVD 4 and Mac OS X.5.x *DOESN'T match at all* CAN'T be solved.
*Previous versions of Mac OS:*
ERROR #-1
Just having burning problems in iDVD that resulted in Error #-1 which I have found originates in iMovie.
This was due to problems with iMovie and sound tracks.
- In my case there were sounds that hid fare away outside
the sound tracks. When deleting all sounds the DVD burned OK
Restoring the sound track one at a time and with special observations to
the fact that no sound reached outside the right end of the
sound tracks (Invisible and impossibly to mark to delete). It at
last made a perfect DVD disk.
This problem is rather tricky to get hold of be cause I couldn't
see the sound files how much I enlarged the sound tracks.
a) empty the sound tracks
b) re-insert the sounds one at a time.
ELSE
*When not knowing what to do.*
There are a set of things to test:
1. Free space on internal (start-up) hard disk: It should have 25Gb or more. This is especially important when running iDVD.
iDVD can’t address any other hard disk as scratch-disk so space is of uttermost importance.
2. The Hard disk is untidy:
Repair Permissions (Apple Disc Util tool) - Run this
Repair Hard disk (Apple Disc Util tool) - To run this You need to start from a CD/DVD or external hard disk.
3. Delete iDVD pref file - or rather start a new user/account - log into this and have a re-try
4. Let Your Mac turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help.
5. Program miss-match:
iDVD 5.0.2, Mac OS X.3.9 AND QuickTime 6.5.2 - is OK
iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.4 - is OK
iDVD 7.0.1, Mac OS X.4.11 AND QuickTime 7.4 - is OK
6. UPDATES - is important: iLifeSupport8.1.1.dmg is important for running iLife08 bundle.
7. iDVD (08) Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
8. Mac OS X.5 (Leopard) - at least iDVD 1 to 4 - don’t work any more
9. Trying to collect info on. Leopard system:
iDVD08 - not working -> Should be soluble
iDVD 6 - not working -> Should be soluble
iDVD 5 - not working -> Don’t bother - will not work
iDVD 4 or previous - not working -> Don’t bother - will not work
Yours Bengt W -
The error #-1 was reported...
Ok guys, can anyone help me out,
i've created my project in iDVD 5, it's small enough to fit onto a DVD, but when I try to burn it to disc or to disc image, it goes all through the processes
of encoding slideshow, encoding video, but when it reaches the end of this process i get the following message appear
"Errors found during the burning process"
"The error #-1 was reported..."
And it doesn't create a disc image of my file.
Can anyone please help me and let me know what this error could possibly relate to. I'm starting to pull my hair out now.
Regards
Darren Andrews
G4 & G4 Powerbook Mac OS X (10.3.9)
G4 & G4 Powerbook Mac OS X (10.3.9)Hi D
Sue is most certainly right.
But if I was You I would check each movie that You dropped/imported to
Your DVD project. I got this error when adding sound to one movie and
this sound file (.aiff) was way to large compared to my movie. Say 15 min
movie and a more than 60 min sound-file of which I needed about 15 sec.
So I cut in the sound track the first part and the last part - deleting those
and keeping the middle part. This resulted in that iMovie thought that there
was remaing sound way outside the timeline on the right end - non reachable.
When making a DVD = -1#Error
Deleting the soundtrack - OK DVD
Importing new sound but in a more fitting size. - DVD OK
Yours Bengt W -
The error #-2147352543 was reported- when burning from iDVD
I created a DVD project in iDVD and used Share to use iDVD. When I click the burn button I get this error: "The error #-2147352543 was reported…" I clicked on the map and there are no error triangles. The error appears almost immediately. My iDVD software is up to date. I was able to burn a short DVD a few days ago without problems.
Please help.error message as soon as I click the burn button.
Can you create a disk image?
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006 -
Everytime I turn my ipod nano 6th gen on it automaticLly goes to the music tab please
Title says it all thanks!
Is your iPod configured to sync photos? If so, try disabling the syncing of photos and see if the error message goes away.
Anything change with your iTunes library since the last time the Nano was able to successfully sync?
B-rock -
First Generation Ipod Nano gives error message when using Windows Vista
I have a dual boot PC running XP Home and Vista Home Premium. My three kids have Ipod Nanos. Each kid has their own user profile on the PC. The later generation Nanos (2) work with Vista perfectly.
The first generation Nano causes an error message when you connect the Ipod to the PC while running Vista. If you run the XP and associate the Nano with XP everything syncs perfectly with no error messages.
Conclusion: Early Nanos work with XP, but do not function properly with Vista.
Request of Apple INC. - Fix this to work with Vista, or send me a new Ipod free of charge.All of the following programs should work with Vista.
Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Another free program is Pod Player.
SharePod is also freeware. -
Ipod nano 6gen error message 13019 I have tried soooo much!!!
I have re-installed itunes and reconfigured my ipod back to factory settings but my ipod nano 6gen keeps getting the (error message 13019) please help me sync my ipod!!!!
See this article.
http://support.apple.com/kb/TS2830
Some have been able to resolve it by removing podcasts and/or rebuilding their iTunes library.
http://support.apple.com/kb/HT1451
B-rock -
Ipod nano 4GB (error message in itunes)
I receive an error message when itunes is up and my ipod nano is connected. The error message says: The file or directory\iPod-Control\iTunes\iTunesDB is Corrupt and Unreadable. Please run the Chkdsk Utility. Also, no music can be transferred to my ipod. At times a window pops-up saying: iTunesLibrary.itl cannot be read because it was created by a newer version of iTunes. I did download the latest version and still dosn't work!
Can anyone help on the steps to solve this problem?
Thanks!The only advice I can give it restore everything to it origninal setting and from your Itune snyc everything back in
-
Ipod nano 6g, error code 1601
hello
I have a problem with iPod nano 6g. When connected to the iMac is not visible. I push all the buttons and wait. It starts to connect and after a while the message: iPod is visible but unrecognized. error 1601??
I would add that for some time does not turn on. Yesterday I connected it to yamaha hifi and work. today again is black.
Please help MajaHey MajaPil,
Thanks for using Apple Support Communities.
Looks like you are getting an error when connecting to the iMac.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#1600
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Have a nice day,
Mario -
After several months I found my Ipod Nano again. In the meanwhile, I switched from Android to Iphone 5s and got quite common with ITunes.
ITunes does find the Ipod, but states, that he is in "maintenance mode" and needs to be restored by ITunes - done so, updated ITunes to newest version, IPhone works well, but when downloading newest IPod Nano software, at the end of the 4-5 minutes download I receive error message "unkown error 9006".
I've presed power button together with vol - also for x-times, but unsucessful.
Is there any hint I haven't been able to find via google??
Please adviseThat one can indicate a security software issue. In the course of your troubleshooting to date, have you worked through the following document?
Resolve issues between iTunes and security software
Maybe you are looking for
-
How long does it take for Infinity DLM to increase...
I have had a noisy line since I had infinity installed back in May this year, however as the fault was intermittent I didn't want to risk the possible £130 charge should they not find a fault. However the problem got progressively worse so I reported
-
How do I put a photo slideshow on my Phone ?
I have checked the manual, sought help and I still have a problem I can get photos to sync back on my phone from my computer but I have a problem getting a slideshow to sync. I thought it might be the format but my slideshow program has a tab f
-
Lion unable to recognize my TM700 camcorder
hi, I connected my Panasonic TM700 camcorder (AVCHD 1080i/P) via USB cable to my iMac. However, it did not show up in Finder as a camera/device. How can I download the videos from camcorder to iMovie 11 or a folder ? Thanks in advance for your help
-
How do I find out if my mac's airport card supports 802.11n ?
It just says Airport Extreme in System profile and it also says that on my wife's iBook - wondering about maximising our network speeds with an upgrade to AEBS and TV. thanks
-
How do i print a mirror image for a tranfer. i have a officejet 6500a
Doing a t-shirt transfer with words; need mirror image. How to set Officejet 6500A to print?