Everytime I try to browse, I will type in an address and it'll go but the page is just blank, like it didn't install all the way. I've tried uninstalling and reinstalling nothing helps what do I do?
I installed Firefox 6 and everytime I type in a different address it will act like it is loading the picture and then everything is blank. I know the internet is working because I can browse with other browsers.
When you uninstalled and reinstalled AI did you run the Cleaner tool in between?
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Similar Messages
-
Itunes lo but I cannot type into the search bos. In addition a dropdown menues are black. Downloaded the latest iTune software (several times). Uninstalled McAfee security. Nothing seems to help. I used iTunes for several years...
After using Macs for a number of years at both school and work, I finally ordered an iMac G5 of my own. When the DualDiscs came out I bought a few because I wnated all the content I could get. Attempting to play them on my iMac at work however, proved problematic. The audio side would spin for a few seconds then eject. I was slightly annoyed, but settled for playing the DVD audio versions of the albums as I worked. In my car stereo, the audio would work, but any other player it would not.
When my personal iMac came, I expected the same problem- only the DVD side would play. Imagine my surprise when every DualDisc I attempted to rip (Switchfoot, Bruce Springsteen, Rob Thomas, Ben Folds, The Wallflowers, Oasis, David Gray) in iTunes was read and successfully ripped.
So I wonder this- is it as much a problem with older Superdrives not being able to read the thicker discs as anything else?
Or am I an anomaly -
everytime i try to download itunes it says rolling back action and error . i dont know what to do please help . P.S. i have windows 8
Hello there Unicornbarf534,
Thank you for using Apple Support Communities.
It sounds like you are unable to successfully install iTunes. I recommend the troubleshooting instructions in this article named:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Here is a general outline of where the troubleshooting will take you:
General installation troubleshooting
1. Empty your Temp directory and restart
2. Completely remove iTunes and related components
3. Install the latest version of iTunes
Additional troubleshooting
After performing each of the steps below, you will need to completely remove iTunes and related components and then install iTunes again to determine whether the issue is resolved.
1. Make sure you have administrator account access
2. Make sure your folder names don't contain strange characters
3. Get the latest Windows updates
4. Disable other conflicting software
Additional Information
If you only need to install QuickTime, or if iTunes installs but QuickTime installation did not complete
Try downloading and installing the standalone version of QuickTime from http://www.apple.com/quicktime/download/. Be sure you download the version that does not include iTunes.
If the steps outlined in this article don't help, you may be able to find a solution to your issue by searching the Microsoft support website.
All the best,
Sterling -
I plug my ipod into my computer itunes pops up with error message "Ipod detected but can't be identified properly" suggests I unplug and try again or uninstall itunes and reinstall nothing works. What should i do?
summarizing:
iPod nano (what version iOS BEFORE update?)
downloaded music
updated iPod to iOS 8.1.2
Windows 7 PC
plug-in iPod to PC
error message from iTunes on the PC "Ipod detected but can't be identified properly" ⬅[quoted from your original post] (+ suggested troubleshooting steps)
un-plug > re-plug iPod (how many times?)
iTunes un-installed from PC (?)
iTunes RE-installed to PC (?)
error message repeats(?)
searched "Ipod detected but can't be identified properly" site:support.apple.com with ZERO results - pretty strange that the support site wouldn;t know an iTunes generated error message (?) EDIT - had an "aha! moment when using a fresh Google search page and 'suggested' CANNOT
then "Ipod detected but can't be identified properly" site:discussions.apple.com had ONE result = Can't connect to iTunes with ipod touch (-50 error) - NO REPLIES
CANNOT instead of can't [ tsk tsk ]
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
follow all the instructions in order and let us know -
I have an old version of InDesign CS5, have not used in a while..about a year. It will not load nor allow me to uninstall and reinstall, please help. I have original discs and serial number. How can I fix this?
CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3
-
Today my iPod touch 4 generation was dropped. now it just has a white screen. i tried reseting it by clicking the home and lock buttons but nothing helped. what is my problem and how do i fix it?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Plz someone help I made custom ringtones and when I try to put them in my iPhone 4 it hey appear gray on iTunes and won't go on my phone and I tried syncing it don't help what do I do???!!!
The ringtone file format is m4r. You can create ringtone from any of your music file in your iTunes Music library.
Follow steps as follow:
1. Right mouse click the song in music library you want to create ringtone and choose “Get Info”
2. Choose “Option” Tab, Check “Start Time” n Stop Time” of the track you want to make into ringtone and put in your start time and end time (Max 40 secs duration), then click OK
3. Right mouse click the music file again and choose “Create AAC Version”
4. You will see a copy of song with same name appeared but with 40sec duration only. Now drag the song onto your desktop and you will see the name is now xxxxxx.m4a.
5. Change the file extension m4a into m4r from the desktop
6. Delete the 40sec m4a file from the music library (You must do this step or Itune will not accept your new m4r file).
7. *Important - Now uncheck the start n stop time of the original song so that you can play back full length.
8. Now, drag the m4r file from desktop to Library
9. Click onto the Tones under Library, and you find you ringone file.
Note: Just in case you cannot "Create AAC version" from Step 3, go to top menu, click "Edit", "Preference". Under "general" Tab, click "Import Settings", make sure under Import Using that "AAC Encoder" is selected.
Once you have ringtones in Tones library, you can sync ringtones over by connecting your phone to PC, select iPhone under Devices on iTunes left Pane, then go to 'Tones' tab and check SYNC TONES as well as the ringtones. Click the SYNC button on the lower right window. -
IPhone is plugged in to my laptop and is charging but will not sync. The phone logo doesn't appear in the right hand corner. i have updated itunes restarted both phone and laptop, changed connectors and still nothing. help?
Same thing happened to me, nothing is working. I've updated everything, restarted everything, nothing seems to work.
-
My iPhone has barely any service while my dads same phone has full bars an I've reset network settings called ##873283# and nothing helps what should I do
take a look at this link reset network settings http://www.apple.com/support/iphone/assistant/wifi/#section_5
My bad, it doesn't really give you the details that you were looking for.
For wifi - you would have to reenter the password. I'm not sure about celluar data. -
Uninstall Tiger and reinstall tiger. What is the process?
Hello,
I would like to uninstall Tiger and reinstall it. What is the process?
Thanks,
JordanWhy do you want to uninstall it? Do you have a theory that a previous of Mac OS X works with something that it currently does not work?
Or do you want to find out if you have data that is corrupt with a specific application, and if so, which application?
Uninstalling is not easy, and usually requires you backup your data first as my FAQ explains:
http://www.macmaps.com/upgradefaq.html
If you just want to test an older version of the OS, purchase and external Firewire hard drive and boot off that the older operating system, as long as it is one your Mac supports. -
I selected "update all" to update my apps, entered my ID and they all went to "waiting" and none of them started updating. Tried shutting down (several times), it was plugged in, I closed all open apps...tried uninstalling and reinstalling 1 app and it still is waiting? Thoughts?
See if any of these suggestions help you. They have worked for others in the past but YMMV.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
I accidently deleted bonojur and now what music is on my iphone is not transferring to my itunes library. I can't get the most recent version of itunes unless I sync my library and iphone which would mean all my music on my iphone being deleted. Itunes says when I try to get the recent version that I should transfer my purchases but when I I click okay it doesn't work. I have tried uninstalling then reinstalling itunes which has also reinstalled bonjour but I still can't get my music from my iphone onto my library...help!
None of that worked but I sat on it for almost 5 hrs and tried the last option of setting up my iPhone as NEW instead of restoring it from a backup that I created through my Indian bought iOS devises. And that solved the problem. So looks like I cannot backup my old settings. But was able to get my aps and contacts recognized through cloud.
And just in case I also updated the iTunes later. Everything works perfect now. Thanks for your thoughts too. -
I am trying to transfer pictures and music from my phone to my computer, and when I connect my phone, it says Device not installed correctly. I can not see my files or nothing. What can I do?
Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung -
Ipod Touch 1st generation: blank white screen - I tried holding both buttons and connecting it to the computer, restoring it, and still nothing. What else can I do? I did not drop it in water.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I get kernel paic upon boot. I did that hard drive cleanup and reinstalled Lion. What about memory? Anyone think I need to upgrade my memory? I have 8 G of upgraded RAM. (20 inch iMac core 2 duo)
If you're able to boot, launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post "shutdownStall" or "hang" reports.
If you can't boot in the usual way, try a safe boot. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Maybe you are looking for
-
D-Link DIR-615 cannot access wirelessly with iPhone 3G
I've added another router to my home to get better range in the far corners of the house. I added a D-Link DIR-615 hard wired to my first router. I can access this new router both by cable and wirelessly with my laptop, but not wirelessly with my iPh
-
File Upload - File Name in Hebrew problem
Hi all, I am using file upload with IWDResource in NW04s and while loading files with hebrew encoding I am getting gibrish when using getResourceName() method. I also tried working with data and fileName properties - both giving null. Any ideas? Than
-
Not able to get repository item
In product feed i am trying to update item for that when i try to get item by catalogReposirtory.getItem(id,"product") it is returning null even though that product is present in the database table.
-
OSX 10.6.8 installed bricked my MacBook Air
the OS X 10.6.8 install completed on my MacBook Air. Now it won't restart. Anyone else had this problem? And the solution is?
-
Is it possible to change the value of "maxdatafiles" after creating a db??
Hi, all. Is it possible to change the value of the followings after creating a database?? -maxdatafiles -maxinstances -maxlogfiles -maxlogmembers -maxloghistory Thanks and Regards.