Everytime I try to open itunes, a notification saying: "the itunes library can't be found or created"

I installed the latest version of iTunes and now everytime I try to open it, a notification pops up that says "the itunes library cannot be found or created"
what do I do?

Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
Operating System
Default location of iTunes library
Microsoft Windows XP
\Documents and Settings\[your username]\My Documents\My Music\iTunes\
Microsoft Windows Vista
\Users\[your username]\Music\iTunes\
Microsoft Windows 7
\Users\[your username]\My Music\iTunes\
... and open the iTunes library you find in there.

Similar Messages

  • I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created.  The default location for this file is in the "iTunes" folder in the "Music" folder.  Any ideas?

    I am trying to open iTunes on my Windows 7 PC and am getting the following message...the itunes library can not be found or created.  The default location for this file is in the "iTunes" folder in the "Music" folder.  Any ideas?

    Let's try this first. Hold down the Shift key while you try to launch iTunes. You should eventually see the following dialog:
    Click "Choose library". Browse to inside the following location (depending on what operating system you're running):
    Operating System
    Default location of iTunes library
    Microsoft Windows XP
    \Documents and Settings\[your username]\My Documents\My Music\iTunes\
    Microsoft Windows Vista
    \Users\[your username]\Music\iTunes\
    Microsoft Windows 7
    \Users\[your username]\My Music\iTunes\
    ... and open the iTunes library you find in there.

  • Everytime i try to open iTunes it says there is an error and it cannot be opened. what should i do?

    Everytime I try to open iTunes, it says there is an error and cannot be opened. What should I do?

    What's the precise text of the error message(s) please, confused?

  • I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder.

    I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
    I have tried a few things but iTunes closes right after i click okay. Anyone know anything?

    Look in your Home > Music folder.  There should be an iTunes folder there and it should have a number of files and folders including one called library.itl  You want to guide iTunes to that file.  If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.

  • Everytime I try to open my project, it says it is damaged and cannot be opened? Why? How can this be fixed?

    Everytime I try to open my project, it says it is damaged and cannot be opened? Why? How can this be fixed?

    emerickd
    Wonderful news. Congratulations on your success. Great job.
    You wrote
    Wonder why the auto-saves were kind of all over the place as far as their numbers and my progress? Oh well!!
    A few years ago I looked at the ordering of those AutoSaves, but could not find the thread. So, I decided to look at Premiere Elements
    13/13.1 ordering of the AutoSaves.
    My Edit Menu/Preferences/AutoSave settings were the following to speed things up
    Automatically save every minute(s) = 1
    Maximum Project Versions = 5
    In the Adobe Premiere Elements AutoSave Folder were:
    My new video project-1.prel  (first and the oldest)
    My new video project-2.prel
    My new video project-3.prel
    My new video project-4.prel
    My new video project-5.prel (last and the newest)
    I am OK with the first 5 with the maximum project versions = 5, but.....
    Since I have set for only 5 versions, where do the subsequent versions go every 1 minute since you continue to
    see only the above file names in the Adobe Premiere Elements AutoSave Folder.
    My new video project-1.prel
    is now the 6th AutoSave and replaces the original first AutoSave.
    My new video project-2 prel
    is now the 7th AutoSave and replaces the original second Auto Save.
    Since I did 7 AutoSaves, this is the last and the newest.
    My new video project-3.prel is still the original third AutoSave.
    My new video project-4.prel is still the original fourth AutoSave.
    My new video project-5.prel is still the original fifth AutoSave.
    So, after the generation of the 10 th AutoSave, all the original 5 AutoSave would be gone,
    and the My new video project-5.prel would then again become the last and the newest)
    As for the question about
    Can I re-save this auto-save under a different name?
    Yes, but review the Edit Menu/Preferences/Scratch Disks for the locations of the scratch disc. If same as
    project, then those scratch disc will end up in the folder with the AutoSave which has become your project.prel.
    A battery failure was at the core of this situation. So you should be OK moving forward.
    Best wishes
    ATR

  • TS3494 my iTunes has stopped working on my mac book pro 13" when i try oping it it saysThe iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder.

    my iTunes has stopped working on my mac book pro 13" when i try oping it it saysThe iTunes Library file cannot be found or created. The default location for this file is in the “iTunes” folder in the “Music” folder. i dont know what to do i need my itunes back

    Hi pgarard1,
    If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
    iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
    http://support.apple.com/kb/TS2363
    Regards,
    - Brenden

  • I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can't be completed because one or more required items can't be found. (Error code -43). What do I do?

    I renamed a power point a file and now when I try to open it it keeps giving me the error code -108. If I try to open or copy it say: The operation can’t be completed because one or more required items can’t be found. (Error code -43). What do I do?

    Post in Microsoft's Powerpoint (Mac) message boards.

  • When I try to open a document it says "The document couldn't be opened"

    When I try to open a document it says "The document couldn't be opened" and it has a yellow triangle with an exclamation point in it.

    That is I take it Pages '06? Which is a bit long in the tooth.
    I'm trying unsuccessfully to find the minimum requirement for OSX 10.6, but yours may not be compatible with Snow Leopard.
    Your contacts are no doubt using either Pages '08 or Pages '09 which as later versions can open yours but you can not open theirs.
    Updating from Pages '06 is a no brainer IMHO.
    Peter

  • My os is 10.8.4. Airport Utility is 6.3. When I try to pull backups, time capsule says: 'The folder "Pictures" can't be opened because you don't have permission to see its contents.'.

    My os is 10.8.4. Airport Utility is 6.3. When I try to pull backups, time capsule says: 'The folder “Pictures” can’t be opened because you don’t have permission to see its contents.'. So I cannot use Time capsule to back up so what gives?

    Did you use migration assistant when you set up the computer?
    TM will treat this as a different computer and permissions issues can arise from that.
    Pondini is the expert on that stuff.. hopefully he can drop in.
    But I recommend you read all the FAQ to do with restore.. Q14-17.
    And then look at the permissions issues he lists in troubleshooting.
    E9 in particular. http://pondini.org/TM/Troubleshooting.html

  • I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

    I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
    iPhone 5s, iOS 8.3

  • ITunes folder can not be found or created

    I tried to install iTunes on my XP, installation worked out but when I start iTunes a message appears after the license agreement that says that the iTunes folder can not be found or created and then nothing happens iTunes doesn't start up. I tried to create a my music folder with a iTunes folder inside. Still the same message. In the next step I tried the whole installation advice posted on top of this discussion including uninstalling Tunes and Quicktime, deleting the Temp files and using the Windows Install Cleanup.
    Now I don't have a clue what to do next to get my iTunes running. I hope there is someone out there who can help me.
    Give me my music back.....
    Cheers...Mork

    hi Luigi!
    I have the same problem!
    i'm just going to double-check something. are you getting the following error?
    The folder iTunes cannot be found or created and is required. The default location for this folder is inside the Music folder.
    or is your one saying something different? if so, what does it say? include error message numbers if you're getting them. (that may help us with the language barrier too.)
    love, b

  • I've just got a new Dell with windows 7.  When I try to download itunes it says the windows installer can't be found

    I've just got a new Dell with windows 7.  When I try to download itunes it says the windows installer can't be found

    When your username includes a Charakter like "acson te graf" zhere is a Problem for Windows to find your installiert-Files. Yust Build another Username like "Dummy", give admistration rights, change to this user and install iTunes on this accout. Now you can Return to your Old account an use iTunes.
    I am still surching how to change the username in Windows but still no idea.

  • "The iTunes Library file cannot be found or created..."

    I'm getting this error upon opening iTunes:
    When I try to open iTunes with the option key, it asks me to find a library. I can navigate to my library and see the file, but it is grayed out and can't be selected. Prior to this i had been getting an error about iTunes not being able to save the library, but I thought it was coming from my backup app.
    Any ideas? I can no longer open iTunes or access my music or videos.
    Thanks!

    OK.. I finally found an answer buried among a million other posts.
    To fix this, click to open the iTunes app and immediately hold down the "Option" key.  This will allow you to either create a new iTunes library file, or point the app to where the library is.  In my case, I repointed it to the Music>iTunes folder where my library file was and this worked.
    This is the link that helped me figure it out:
    http://support.apple.com/kb/HT1589

  • Can't open downloads. Message says The application 'preview' can't be opened

    Can't open downloads. Message on middle of screens says: The application 'preview' can' be opened.

    Have a look at this article in the Apple Knowledge Base and let us know if it brings you any combination of joy and/or satisfaction.

  • HT1349 Everytime I try to open Itunes I get ab erroe message saying that " an application has made an attempt to load the C runtime library incorrectly" This pop-up box has a heading of Microsoft Visual C ++ Runtime Libraryand declares a " runtime error" 

    Evertime I try to open Itines I get an error message for a " runtime error "  from Microsoft Visual C ++ Runtime Library --- Help Please

    I actually solved the issue myself. In my prior attempts, I was only un-installing iTunes from the Control Panel. This time I un-installed everything Apple: ITunes, QuickTime, and any software application that was from Apple.
    Once I removed all of the Apple software and re-downloaded iTunes, everything worked perfectly.

Maybe you are looking for

  • Installation problem with adobe elements on Mac

    Nothing shows up when I insert disc 3 of adobe photoshop elements into my Mac. When I go to DVD player and push play it says "supported disc not available". I don't know what else to do. I have tried turning my Mac on and off and have switched the si

  • Blackberry 10.2.1 official update on my Q10

    Does anyone have the Verizon Blackberry 10.2.1 official update yet? My phone says it has the "latest" software upgrade of 10.1.0.4189. The Blackberry website says the upgrade is available to carriers. Please help Verizon!

  • How to hide % measure column Grand Total  value in Pivot View in obiee 11g?

    Hi , I am facing a issue in obiee 11g .I am using a Pivot table to display the grand total of 3 metric columns eg: A , B,  C out of which B is percentage  so I need to remove the grand total value of the percentage column. We have to stick to Pivot V

  • Recto verso print result very strange

    Hi !             First of all I want describe my configuration.... We are a  town with a lan  of  more than 50 printers and 200 computer. We have an domain controler and since few month  a print server on a Windows Server 2008 R2 datacenter is . On t

  • Stored Procedures -- ADF UIX

    Hello: I've created one method in the class of the application module, then i select this method in the client interface.......and after i put it on a DataAction, then i invoke it from a submitbutton in my uix page, but it doesn't work. I don't know