Everytime I try to use FF, dozens of pop ups come up saying FF wants to use various Fuji and Fusi fonts. Nothing I do seems to stop these popups and it takes me 10 minutes before I can use FF. why does this happen; how can I stop it.
The specific message runs something like this: Firefox wants to use Fuji Extended Bod Italic on the volume WD startup. It is not installed. Allow Firefox to use it?
I can choose allow or don't and there is a checkbox that says "do not ask me again." no combination of these options stops the progression of pop ups, which can last for minutes and will start all over again next time I start firefox.
Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.
Similar Messages
-
carrier tab used to be under location services,,, and then it went somewhere ,,and then it came backk ,,does it happen to everyone?
What are you talking about?
-
I recently updated my software to ios6 & have now found camera not working on my ipad. We have tried resetting & numerous other solutions but nothing has helped. Can anyone tll me why this has happened & ow o I fix it, thanks
1. Double-click the Home button to reveal Task Bar at bottom
2. Hold the Camera app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar -
I use Firefox 6.0.2. When I shut the browser and try to reopen it I get a message saying that Firefox is still running and that I should reboot. This happens constantly. Why does this happen and is there a way around it?
There are a few possible causes for that error, for details see [[Firefox is already running but is not responding]].
-
Whenever I plug my iPod in the computer is comes up with this ..This iPod cannot be used because the Apple Mobile Device Service is not started. - what does this mean, how can i fix it?
Instructions here > iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
Or Mac > iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X -
When i tried updating my iphone 4 to the latest IOS version 7.1.1 it was updating until the end of the update where it had an icon which said connect to itunes. When i try connecting to itunes on my laptop it still doesnt program, by the way my itunes has the latest updae. Why is this? How can i fix it?
Hey there Raymondd2014,
It sounds like you had been updating the phone and now it is in recovery mode. Take a look at this info first:
If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
If you are unable to get out of Recovery Mode, use the following article to restore your device with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If you don't see your device in iTunes follow these steps for Windows.
Thank you for using Apple Support Communities.
Take care,
Sterling -
When I use Siri with Voiceover on my iPHONE 4S. Voiceover will not respond to any finger jestures. Why does this happen?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
The screen on my MacBook has just started flickering and shaking up and down while I am using it. The screen starts flickering, shaking, gets pixelated, begins to freeze, and eventually fades to white. Why is it doing this? How can I fix it?
It is a newer MacBook, just over 1 year. It is well cared for, hasn't been dropped, etc. I don't want to pay for expensive repairs for such a new computer, and I certainly can't afford a new one!
I've tried updating my system like the Support page suggested, but no improvement. The problem started just the other day, and is progressively getting worse.
.... as I typed this, it did it again. Only, this time it did not flicker and shake, but got 'pixelated' (pixels came up checkered-like darkened and lightened). It did this for about 2 minutes and then stopped after I did not touch the computer.... Now it is flickering... HELP!it means that it is not a hardware issue. Other then that, Im not too sure. Sorry I can't help you any further, but Im sure others members of this forum will read your question and be able to help you. Good luck
-
Lately when I sync certain albums to my iPhone, the tracks are duplicated one behind the other so that I have to listen to each song twice. Why does this happen and how can it be fixed?
Very strange behavior. Don't entirely give up on the "Manually Added Items" category ... I have seen things magically appear there even after I've checked and seen nothing there. I think things got real quirky when Apple released iCloud ... I don't remember extra copies of purchases lingering on my iPhone once transferred to my library before that. Sure, if I bought an album directly to my iPhone it would stay on there even after I sync to my library, but if I deleted the album from the iPhone it stayed deleted. Now it seems that there are some phantom copies that come and go with no explanation.
jcburbank wrote:
I've tried deleting the album from both the phone and from iTunes and then redownloading them to both and the same problem occurs.
If you're re-downloading an album to iTunes and your iPhone, that may perpetuate the problem. What happens if you completely delete every copy of the album, then just download to your iTunes library and then sync the album to your iPhone from your library? That should put only one copy on your iPhone.
A few other things to try:
1- Completely sign out of your Apple account on your iPhone, then re-sync to iTunes, then sign into your account on your iPhone again. Maybe throw in a Reset or at least a power OFF/ON somewhere in the middle.
2- Go to Settings/ General/ Usage, then select Music and when you see All Music, swipe your finger across it and tap the Delete button. Before doing anything else, Reset your iPhone. This does not actually delete your music, but seems to clear up some cobwebs left behind (people use this technique to reduce "Other" that swells up over time). -
When I have installed updates for Firefox in the past, I have always lost my bookmarks. Why does this happen and is there a way to avoid it? I want to install the new update for Firefox but I am afraid of losing my bookmarks again. What can I do about this?
Welcome to Apple Support Communities
Do not worry. Hold Sleep (the button you have at the top of the phone) and Home buttons at the same time until your phone restarts, and then try installing the iOS update again. -
every time that i sync my iphone with a cord to my imac some large portion of my music is placed in the cloud so that i must down load it from the cloud. this includes music that i have purchased on itunes and other music. it seems random.
why does this happen? is it a setting? i want to stop it. and music that wIt was gift back in September. You can follow the instructions in the link below to remove them:
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support -
I got home today and got a message on Messages or IMessage and the Messages app would not open i restarted my computer and it had a question mark as the icon for the app. Help!?!?! What does this meen how can i prevent further damage or fix damage delt
Is this what you see when you start up your MBP?
http://support.apple.com/kb/ts1440
Ciao. -
I made a project with multiple tracks and had it all panned and mixed. Now it's only playing in the right speaker. Not even regestering a left side in the master volume? What happened, how can I get both sides back?
Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt -
I have purchased a tv series and it only downloads half the series. I don't know what's going on. It's don't it with a couple of tv series. Why is it doing this? How can I stop it?
Check your receipt for the purchase for the "report a problem" link.
-
I can't understand my Icloud mail behavior.All messages I sent are stored in sent box as usual whereas messages I receive are disappearing after short period of time (no more then 2 weeks).Why does it happen?Do I have any chance to restore them?
Unfotunately I'm not eligable for MAC support over the phone and have to take it in to the Genius Bar. Hmmmpf.
But I was able to isolate the errors (using Console) that occurred just prior to the network failing:
8/30/09 10:53:05 AM Dock[231] _DESCRegisterDockExtraClient failed 268435459
8/30/09 10:53:25 AM SystemUIServer[232] * CFMessagePort: bootstrap_register(): failed 1100 (0x44c) 'Permission denied', port = 0x9307, name = 'com.apple.tsm.uiserver'
See /usr/include/servers/bootstrap_defs.h for the error codes.
8/30/09 10:53:25 AM com.apple.launchd[196] ([0x0-0xc00c].com.apple.systemuiserver[232]) Check-in of Mach service failed. PID 232 is not privileged: com.apple.tsm.uiserver
8/30/09 10:53:33 AM GrowlHelperApp[249] WARNING: could not register Growl server.
8/30/09 10:53:52 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[259]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
8/30/09 10:54:36 AM [0x0-0x1a01a].com.apple.Safari[261] Debugger() was called!
8/30/09 11:00:50 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[279]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
8/30/09 11:05:52 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[290]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
Any idea what these mean?
Maybe you are looking for
-
OS X 10.5 Leopard install disk won't mount
I'm running OS X 10.4.11 on an iMac G4 and want to upgrade to OS X 10.5. I bought a retail 10.5.1 installation DVD set but I can't get the disks to mount on my iMac G4. I've tried loading it in with OS 10.4 running and I've tried starting up from the
-
Chat history displayed correctly in Outlook, not showing in Lync 2013 client
Morning all, It seems like I have an un-searchable issue with many hits returning that conversation history flat out doesn't work, which isn't the situation here... The backend consists of Exchange 2007 with Lync server 2013. Clients (a mix of Lync 2
-
Sender file content conversion problem
hi Masters, I have sender side structure like this...below.. emp_row unbounded. empid name city country. actually i had given few id with names and other details which i stored in txt file . like 001, ram, newy
-
Possible that itunes will not update iphone OS while overseas?
hi, im in australia, and i was thinking about getting the iphone 3gs through the local australian network carrier here, however, a friend of mine said that whenever he returns to his home country with the contract phone that he obtained under a plan
-
Save password for several application in one workspace
Hi, I have several applications in one workspace with custom authentication. How do I set the option to save password (which is same for all apps) , so I would not write password every time when switching from application to application. Thank you