Everytime I try to use the video camera, my ipod automatically restarts???

Everytime I try to use the video camera, my ipod automatically restarts. I just need to bring the clicker to the Video section on the main menu for it to turn on and off again. I have to scroll over it really fast so it doesn't restart. My dad bought it a few months ago and I just opened it about a week ago. So far, I've synced it once, taken it out out without first ejecting it, and using it on a lamp iHome. Should restoring the ipod do the trick? Is this a common issue with the rest of you?

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps  
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Similar Messages

  • How awkward is using the video camera?

    Many folks relate that it is awkward to shoot video (due to positioning of the lens and buttons).
    So, really, how bad is it?
    Do you get over it fairly quickly, or is it 'perpetually awkward', like waring two left shoes?
    thanks,
    Darrin

    Here's my experiences during a recent vacation.
    My finger accidently crept into more than a few shots - very un-apple like design. It happened less frequently the more I used the video function. Something that you can adjust too but probably never eliminate completely.
    More than once I thought I had stopped video capture by pressing the center button only to find that I had taken a 35 minute movie of the inside of my pocket. I also missed some scenes I wanted because I was actually turning the camera off when I thought I was turning it back on. To be fair these occasions were all outdoors and I was wearing sunglasses which made it almost impossible to see the displayed controls. I didn't have the problem indoors but I have noticed a few other posts questioning the operation of the center button in video mode.
    - I was happy with the quality of most of the video with two exceptions
    1. outdoor scene with a very bright background at the top and the subject matter in shadows at the bottom. They came out very dark and hard to see unless the camera was only pointed at the shadow area - but this was hard to tell when shooting because the display screen washed out in the sunshine and I was again wearing sunglasses. Perhaps any camera would have problems under these conditions.
    2. there is no zoom lenses so if you can't get close to small subjects you won't be happy with the results.
    Overall I got what I expected, an upgrade from my first gen 1G nano, and a handy video camera that captured family memories I otherwise would have missed. I've never owned a video camera before and knew this wouldn't be a hi-def model. For me, as a "free" add-on to an iPod it was a "no brainer" as I don't shoot enough video to justify a dedicated unit. Your milage my vary.

  • 4S shutting of everytime i try to use the camera.

    i have a 4s everytime i go to the camera icon it cuts out (black screen) an when it does that i would have to press the home button then the apple will come on and goes back to normal for a while, then whn i try to do other things on the phone the same thing happens again. what should i do to fix this problem?

    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • I have an ipad2 and everytime I try to use the camera conector kit to read a sd card I got a message saying that the device is not compatible withe the ipad, can any one help me please?

    Subject:

    First, try gently blowing into the dock connector on your iPad to make sure there's no debris in there. That can sometimes cause accessories to malfunction. If that doesn't clear it up, try rebooting your iPad:
    To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
    Rebooting your iPad can solve a lot of problems.

  • Photoshop elements 8 crashes everytime i try to use the editor

    Have been using photoship elements without issue
    since it was released. today, i tried to sign on to the editor and received an error message. tried several times thereafter, page loads and then immediatly quits. what's up with that. called adobe they want to charege me 39 bucks to tell me anything.

    More information needed for someone to help
    http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And, finally, the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions

  • HT4623 Since downloading the new IOS7, can't use the video camera or shut my IPad2 down! Can someone help me?

    Since downloading the New IOS7, can't make a video or shut off IPad2 and need help

    Unable to Update or Restore
    http://support.apple.com/kb/ht4097

  • Live Type crashes every time I try to use the "Place" function.

    Everytime I try to use the Place command and import a graphic, Live Type just shuts down. How do I fix this?
    Todd

    That's interesting Todd. You're on 10.4.5, and "Place" selection crashes Live Type. I'm getting the same thing on 10.4.3, so upgrading the OS may not solve my problem. Plus I don't want to upgrade the OS in the middle of a project. Bad Idea!
    However I have a second system with 10.4.5, and the "Place" and "Place movie" work fine. So for the time being I'm going to build th graphics there. A workaround, but it's a little cumbersome.
    I tried rebooting, reparing permissions, deleting preferences for LT, but those didn't help.
    My next step is to re-install LT only, but I don't want to do this until I output the project I'm working on. (It's two months in the making, and I don't want to mess anything up.) I know it's overly cautious, but there's too much at stake.
    Mac G5   Mac OS X (10.4.3)   2Gig RAM, Kona 2, AttoUL3D
    Mac G5   Mac OS X (10.4.3)   2Gig RAM, Kona 2, AttoUL3D
    Mac G5   Mac OS X (10.4.3)  

  • Using the forward camera freezes the iPod; anyone else?

    When I try to use the forward camera, it freezes the entire camera operating system. Aside from shutting it down, what else to do? I think I have to take it back to the store though.

    Try the following to rule out a sftware problem:
    - Reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPOd.
    If you are still having the problem then it is time to make an appointment at the Genius Bar of an Apple store.

  • Everytime I try and watch a video that is using Adobe Flash Player my computer completely freezes.

    Everytime I try and watch a video that is using Adobe Flash Player my computer completely freezes.
    I am running windows 7, firefox 4 v6, and AFP 10.1. I have tried reinstalling AFP and upgrading to the firefox beta. I first experienced this after installing ADP 10.1 and have uninstalled that program until I can resolve this issue.

    Open System Preferences > Flash Player then select the Advanced tab.
    Click Delete All under Browsing Data and Settings
    Click Check Now to make sure the currently installed Flash plugin is up to date.

  • Everytime I try to use camera on app or snap my screen is just black?

    Everytime I try to use any app with my camera, the camera spot just shows up black. On snapchat I cannot even turn on of off flash or switch directions its facing, the icons are gone. I keep getting a message randomly saying my storage is full, but never when I open the camera. I have a 5S

    Try:
    - Go to Settings>Safari and delete/clear cookies, data history and other stuff if listed. What is listed depends upon the iOS version.
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.

  • Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

    My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
    I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

    Hi and Welcome to the Forums!
    From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
    Good luck and let us know.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I need help! when I am importing my NEF files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support"

    I need help! when I am importing my NEF Raw files from my D3300 camera into lightroom 5 and try to use the "copy as DNG" button I always get an error message saying that "saying the file is not recognized by the raw format support". The whole purpose of that button is so that the file can be recognized... How can I make the "copy as DNG" button work as it is supposed too?? Thank you

    Thank you for responding. So I essentially will never be able to use that button in lightroom 5? do I need to get LR 6? Will there ever be an update for LR 5 that will enable me to use it?
    Does DNG Converter work within LR or do I have to upload pictures to my computer and then make a second copy in DNG format. and then go into LR and use them?
    Thank you @dj_paige

  • How to copy videos from iPhone to iPhone? The videos are in QT format and were taken using the iPhone camera.

    How to copy videos from iPhone to iPhone? The videos are in QT format and were taken using the iPhone camera.Help me, anyone? Thanks in advance.

    Just to add.....I created a folder on my PC to store all videos taken from my iPhone and my wife's iPhone.
    I just cannot sync those videos taken using my wife's iPhone to my iPhone.

  • Every time I try to use the camera feature it won't work

    Anytime I try and use the camera feature -- the one built with the phone, through Instagram or Facebook it just closes down that app.  Any ideas?

    Basic troubleshooting from the Users Guide is reset, restart, restore. Try each of these in order until the issue is resolved.

  • Wheni try to use the VHScrCap as video the Adobe flash media live encoder 3.2 just closes?

    Wheni try to use the VHScrCap as video the Adobe flash media live encoder 3.2 just closes?
    how do i fix this?

    Moving the discussion to Flash Media Forum.
    Regards,
    Anit Kumar

Maybe you are looking for

  • Refreshing Entity Objects after Altering the table

    Hi, My Entity Object is based on a table... and View Objects on the Entity Objects. Now if I alter the table (just changing the width of the column), that change is not visible on the Entity Object. Is there any way I can automatically refresh the En

  • Flash CS5 Pro/Flash Builder 4 Workflow

    I'm new to using Flash Builder as an AS3 editor for Flash Pro projects.  I've followed multiple tutorials on the workflow between the two but keep hitting a snag. For example: If I create a new FLA file, edit the document class and select Flash Build

  • Cursor with bulk collect ...

    Hi experts, CURSOR ZIP_CUR IS SELECT * FROM ZIP_MASTER WHERE ..(SUBQUERY) OPEN ZIP_CUR; LOOP      EXIT WHEN C1%NOTFOUND;      FETCH ZIP_CUR BULK COLLECT INTO ZIP_REC LIMIT 1000;           FOR I IN ZIP_REC.FIRST..ZIP_REC.LAST           LOOP END LOOP E

  • I need to DMP FX100 Driv

    Hello my friends! I have got a Creative Digital MP3 Player FX20(no FM). But, I am not music uploading in the FX20. Because, My USB driver need to FX00. System: Win98SE Help me, please!Message Edited by FX20 on 2-7-200606:56 AM

  • Set up the Site's Testing Server

    Hello All! SIMPLY CANNOT "Set up the Site's Testing Server"!! I had a Database set up working great. Then I got a message, "Set up the Site's Testing Server". Never could get it to work again. So I said forget it...toooo hard....I'll just continue ma