Evesham Alqemi 32" TV codes for remote

Trying to programme Vision+ remote to operate Exesham Alqemi 32TX HD ready TV; codes listed for Evesham on BT website don't work. Evesham went bust a number of years ago - so there's no tech support to be had there! I assume Evesham only badged the TVs or assembled from generic components
Anyone got any ideas what codes to try?

ellis6 wrote:
None of the three codes (0891, 0912, 1783) work to program the Verizon remote control (Phillips RC1445301/00B) for our Vizio TV. I also tried the 9-2-2 method, pressing fast forward over 300 times to be sure I went through all of the 200 possible codes and that didn't work either. Has anyone here been able to program their Phillips remote with a Vizio TV?
I know you probably have. But have you looked here for possible updated info?
http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/SetUp.htm
Message Edited by prisaz on 02-08-2009 08:48 AM

Similar Messages

Digitrex ctf3271 codes for remote control

Hi I want to get my remote to control tv but I cant find my tv manual. Does anyone have the codes for this type of tv?

The updated code list is at the following URL: http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/122830.htm
0027 works for my 26 inch Westinghouse, Here's the line of codes from the above website.
Westinghouse 0027, 0478, 0912, 0916

Verizon Codes for remote control for LCD TV

I just got a Westinghouse 26 in lcd tv and need the codes for my verizon remote. I check online but neither worked. They are 0912 and 0916. Can anyone help me ?

The updated code list is at the following URL: http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/122830.htm
0027 works for my 26 inch Westinghouse, Here's the line of codes from the above website.
Westinghouse 0027, 0478, 0912, 0916

No Code For Remote

hi ive just got my bt vision equipment today and cannot find a code for my tv so i can operate my set with the bt vision remote my tv is a dmtech lm20d if anyone out there can help i would be a very happy man

A-Siddall wrote:
yes all working apart from the remote thanks
Thanks for that.
Ha! The forums got one! A fully operational Vision user from day one. An out-of-the-box, plug-it-in and play just use it customer. Happy days.
And sorry Mr Siddall for invading your thread with this. It's just that new users who have problems (non-service) from day 1 post on here. So it appears that if anyone orders Vision, it never works properly and customers have to jump through hoops to get it going. You sir, are confirmation this is not the case for everyone who orders Vision. Thanks.
Now, in regard to your question above...
I suspect dmtech may be a third party manufacturer for someone else.
Go onto Google and ask 'who makes dmtech tv's' and go forward from there. When I got my Vision box, it provided a remote code list at the back of the user info booklet.
And good luck with the above. If you don't get anywhere, please post back here.
Rank - Mostly Harmless.

Apex TV code for remote?

Just bought an Apex LD4688 TV and cannot find a code that works with my Verizon remote (RC1445302/00B). I tried all the Apex codes and even ran through all 200 codes several times. No code seems to work. Any ideas?

actually, I did a search and found ASTAR tv's can be used, on the 2 button remote its code 032 on the four button remote astar isn't an option.
I know that the Remotes are Garunteed to control the Cable Boxes, however your TV may not be compatible with the VZ remote control. You must use the remote that came with your TV or component OR if you absolutely must have only one remote control, then you can purchase a third party Universal remote control that can control the Verizon Cable box

IMac Remote Code for DishTV Remote

Hi All,
I am using a new iMac as TV monitor via the EyeTV Hybrid input. Everything is working well except that I need to program my Dish remote to control the volume of my iMac.
Before I embark on the lengthy code discovery process, does anyone happen to know what the Dish remote programming code is for the iMac monitor?
TIA,
Josh

Unfortunately, if you use all of the given device codes as well as the code search option, then you've pretty much gone through every code in the remote. There are over 300 codes, so you could try again in case you accidentally bypassed the correct code. There's also the possibility that the remote is defective, but if you have no trouble controlling other devices, then that makes it less likely.
If you have a 2nd remote for a 2nd STB you could try that and see if the trouble replicates. If you don't have a 2nd remote, you can obtain a replacement remote through the In Home Agent on your PC or Set Top Box. It can be downloaded here:
http://www22.verizon.com/residentialhelp/inhomeagent/?CMP=DMC-CV090262
Try the setup with the 2nd remote, and failing that, then it just means the remote does not hold a code for that device. I realize the 2 devices are from the same manufacturer, but they are 2 separate products, produced for 2 different services. Any question as to why the 2 are not compatible would have to be directed toward Philips.

Can't find remote control code for Samsung BD-P2550

I am trying to configure my verizon fios remote to control my Samsung BD-P2550 using the DVD button on the remote. None of the suggested codes work nor does search for the code using the remote and the fast forward button for infinite attempts, PLEASE HELP!

joebingo,
Unfortunately the Verizon-provided universal remote will not work for all devices, particularly for advanced devices such as BR players. If you've already tried all the Samsung DVD codes and none of those work then it's most likely that there is not going to be a working code for this particular device.
However, you can try doing a manual code search by following the instructions here.
Regards,
Chris
Christian
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Why won't SKY come up with remote codes for Seiki tv's especially when charging a fortune for SKY

I wish someone could tell me why no remote codes are not available for Seiki tv's instead of coming up with excuses.

Like all new kit, it takes time for the codes to be shared and then programmed into remotes.The Sky Remote has a database of known television codes.Each TV has a group of codes to control the different functions of the TV.Sky develops sets of codes for each TV manufactured and then applies its own code to the control set.The Sky code is what you need to program the Sky remote so that it uses the control set for the selected TV. Each Sky remote is programmed with updated code databases when it is manufactured and to keep track of what remote does what, it is given a Rev number found inside the battery bay of the remote. In the case of Seiki, the code set was not incorporated by Sky until Rev 10.Anything earlier will not work unless by sheer chance it matches the code set of another TV.

What is the Visio TV code for my RMT-B126A remote?

Your website has no available codes for either the RMT-B126A remote or the BDP-S3200 Blu ray player it came with. I want to be able to control the TV volume like I could with my Samsung TV.
Thanks

Hi kwg06516,
This remote(RMT-B126A) doesn't have programmable codes because its not a universal remote. It is exclusive for your player(BDP-S3200) only. It may control other devices such as TVs but with the same brand only.
Thanks,
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Remote infrared codes for the Sony STR-DE675 receiver

Where can I find the remote infrared codes for the Sony STR-DE675 receiver? They are not in the Owner's Manual, nor on the Sony.com website. Thanks.GBP

If you were getting sound and no picture when you had the Wii hooked up to your surround sound receiver, your TV was probably on the wrong input. You would have needed to use the source or input button on your TV's remote and changed the input to the component 1 choice, since that is the port you stated you plugged the Wii into on the TV.
Your cable remote may not be programmed to work with the blu-ray player. However, I think you're misunderstanding the function of the buttons at the top of your remote labeled TV, Sat/Cab, VCR, etc. Your cable remote doesn't work like a Harmony remote. Pushing those buttons at the top of your cable remote are not like pushing the Watch TV or Watch DVD functions on a Harmony (meaning pushing them doesn't change the TV's input automatically). All those buttons at the top of the remote are for that you're describing are to tell the remote which components to control. For example, you are watching cable TV and just used the remote to change the channel but now you want to adjust the volume. You would have to hit the "TV" button on the cable remote to switch the remote from controlling the cable box to controlling the TV. Otherwise, you'd hit the volume controls over and over and nothing would happen b/c the remote would still think it was controlling the cable box. Only a Harmony remote (or similar universal remote) can change the TV's input with the click of a function button.
And to explain why one must change the TV's input when switching components, I always compare the process to the way a tube TV used to work for those that are new to the flat screen TVs. Think of the way your old TV probably worked - you had to have the TV on channel 3 for your VCR, 4 for cable, etc. The input changing is practically the same thing with just a few more steps, if that helps to make things any clearer. LOL
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

Remote code for XBox-360?

Does anyone know the 4-digit code (if there is one) to program into the remote?
I use the XBox to watch DVD's (HDMI), and I'd like to use the TV remote to do so. Thanks!

Unfortunately, if you use all of the given device codes as well as the code search option, then you've pretty much gone through every code in the remote. There are over 300 codes, so you could try again in case you accidentally bypassed the correct code. There's also the possibility that the remote is defective, but if you have no trouble controlling other devices, then that makes it less likely.
If you have a 2nd remote for a 2nd STB you could try that and see if the trouble replicates. If you don't have a 2nd remote, you can obtain a replacement remote through the In Home Agent on your PC or Set Top Box. It can be downloaded here:
http://www22.verizon.com/residentialhelp/inhomeagent/?CMP=DMC-CV090262
Try the setup with the 2nd remote, and failing that, then it just means the remote does not hold a code for that device. I realize the 2 devices are from the same manufacturer, but they are 2 separate products, produced for 2 different services. Any question as to why the 2 are not compatible would have to be directed toward Philips.

HT1539 I entered the download code for"THE HOST"but instead I got a copy of"Spring Breakers".How can I correct this? I called a friend that has"Spring Breakers"and the codes are not even remotely alike!!! I did not want to download what I received!!What'

I entered the correct download code for "THE HOST" but instead got a copy of "SPRING BREAKERS"! All of the prompts identified it as "The Host" but the final product was "Spring Breakers"! I called a friend who has a copy of that movie and the download codes are not even remotely alike!! How can I correct this error? I 'd rather have SyFy that a bubblegum teenager flick!! HELP ME, PLEASE?!

Hello Old Dogg new tricks,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Best of luck,
Mario

Finding TV, DVD, etc. Codes for FiOS TV Remote Controls

Every so often someone posts a question about needing the code for their new TV, DVD player, etc, to program into their FiOS TV remote control. The remotes come with a small booklet that lists a number of codes, but I don't think it has been updated in a while, so codes for newer devices or brands may be missing. Verizon has some lists on the web, but they seem to be difficult to find (at least for me). Here are links to the web pages I have been able to find so far:
TVs: Link
DVDs: Link
Audio Receivers: Link
Audio Amplifiers: Link
If any of you have links to other Verizon web pages, or pages at other sites that provide code lists, I think it might be useful to folks to have them posted in one place.
Some things I wish Verizon would do:
1) Provide links in obvious places to the pages that already exist and are linked above (plus any other pages that might exist).
2) Update the pages on a regular basis. Or if they already do that, then put an update date on the page so we can tell when it was done.
3) Provide a link where people could send Verizon information on new devices they get or codes they discover. I mean a real email address or web page where the information would go directly to the right people instead of a generic email address with a canned response where we never know whether it actually went to someone or just was sent to the bit-bucket.
Any thoughts?
Justin
Verizon FiOS TV, Internet, and phone
QIP6416, IMG 1.6.2, Build 08.58
Keller, TX 76248

Hi Adam,
I've got the same problem you had earlier this year, with the same Matsui tv/dvd combo unit and the Black remote. Did you ever get a successful resolution? If so would you mind sharing the solution with me, thank you?

Remote code for Logik L32HE15

Looking for a code for my replacement TV tried 2135, 1893, 2056, 2123, 2060. How often are codes updated?

You don't seem to have included the codes from Sky's remote code finder here: http://sky.uebv.com/ so have a look here first.

Remote Code for GPX

I have a GPX TV/DVD that isn't able to be programmed to the remote. Is there anyway to find a code that works?

Unfortunately, if you use all of the given device codes as well as the code search option, then you've pretty much gone through every code in the remote. There are over 300 codes, so you could try again in case you accidentally bypassed the correct code. There's also the possibility that the remote is defective, but if you have no trouble controlling other devices, then that makes it less likely.
If you have a 2nd remote for a 2nd STB you could try that and see if the trouble replicates. If you don't have a 2nd remote, you can obtain a replacement remote through the In Home Agent on your PC or Set Top Box. It can be downloaded here:
http://www22.verizon.com/residentialhelp/inhomeagent/?CMP=DMC-CV090262
Try the setup with the 2nd remote, and failing that, then it just means the remote does not hold a code for that device. I realize the 2 devices are from the same manufacturer, but they are 2 separate products, produced for 2 different services. Any question as to why the 2 are not compatible would have to be directed toward Philips.

Evesham Alqemi 32" TV codes for remote

Similar Messages

Maybe you are looking for