Evgts Input Template Retrieving no data and shows #RFR Errors

Hi Experts,
Need opinions regarding a weird issue I am facing in BPC 5.1 version.
Details of the error :
We have the Entity Hierarchy in Rows and Accounts in Col. The Input template refreshes and brings on the existing values for the Topmost (Lowest Level) member selection in the Entity.Similar is true when the Entity member is lowest in the Hierarchy.
The template shows wierd #RFR error when selection is done for one particular Member in the Entity hierarchy.
This template is only showing #RFR for this member and refreshes for all other members.
The Report uses Basic function EVGTS to retrieve the Data and EVSND to send.
Any help would be greatly appreciated.
Regards
Raghav

Hi Raghav,
We also faced similar issue.
The test result tells us it is due to number of columns with EVGTS. It is not due to any particular EVGTS formula in any column.
You can try out removing EVGTS formulas in the report and add one by one and try out.
Does anyone know why number of EVGTS formulas with combination of number of columns resulting into #RFR error!
Thanks,
Rajesh

Similar Messages

I have created a projet on imovie and when I try to share it. it automaticall closes and shows an error.. what should I do.. I dont want to loose all my documents at all...?? its very urgent plss tell a solution to it as soon as ppossiblc

I was working on my project on imovie and when I was trying to share it.. it automatically closes and shows an error... I have tried to do it so many times and it shows the same error again and again.. I dont want to loose the document at all.... I facing too much problem plss help me plss its very urgrnt for me... plss help me :-(

well no reply from the community. sniff- do i stink!? - probably a little bit. If i have lost all that data then I'm gonna really really pong.
Any ways i have purchased a 1tb usb HDD and have managed to duplicate the dmg file onto it. however still unable to mount the **** thing. so now i have ordered disk warrior which will be in my possession tomorrow.
fingers toes eyes crossed.

HT1386 My iphone wont sync and shows an error number (13019)... What does this mean???

My iphone wont sync and shows an error number (13019)... What does this mean???

http://support.apple.com/kb/TS2830

When i try to update cc downloadcenter it, stops after a while and shows an error

when i try to update cc downloadcenter it, stops after a while and shows an error ?

i tried every solution you suggested but nothing helped. And when i tried to download the cc desktop app.again it stopped downloading and gave an error code 207 and message that it could not
contact the server. ( i had internet open all the time and every other site wasconnected ) My premiere pro cc does also quit working when i try to do something ?

HT1338 just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

How to retrieve sharepoint list data and show it on excel-addin using C#

Hi,
we have a sharepoint list where all students are present. we wanted to get the data from the list and show it via excel addin (VSTO) (something like save,retrieve buutons) . we have some more business logic which need to be performed before the data is retrieved
. once data is shown on excel , user modifies it and update/save the record back to sharepoint.
can you please give some samples and suggest any links to start with development.
Thanks
chaitu

Hi chaituatp,
For this requirement, I would suggest you to get familiar with how to create VSTO applications, and how SharePoint object model works. Here are some sample code about this:
How to: Retrieve List Items using JavaScript:
http://msdn.microsoft.com/en-us/library/hh185007(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/office/ee534956(v=office.14).aspx
VSTO application show data in datagridview:
http://stackoverflow.com/questions/16926275/simple-example-of-vsto-excel-using-a-worksheet-as-a-datasource
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

Does PSE13 download photos in the order they are taken on that date and show actual time when hovering over the photo as it did in PSE6?

In my work, I need to be able to look at photos I took throughout the day at various locations and group them by the time I was there on that date to distinguish the different properties I am taking photos of. In my previous version of PSE6, when the day's pictures were downloaded, they were downloaded to the computer in the order I took them, and if you hovered over the picture it would show the time the photo was taken. I just need a program that will organize in that fashion. I do not need a lot of editing options, more the organizational options.

Hi,
If you are happy with PSE 6, why not continue to use it?
PSE 13 can display the images in date/time order like PSE 6 does. The time doesn't appear when you hover over a thumbnail but can be displayed below the thumbnail. The best thing is for you to download the trial version (select version 13 from the following link) and try it for 30 days to see if you like it.
Download Photoshop Elements products | 13, 12, 11, 10
If you use the trial, to see the date and time under each thumbnail you need to go to the View menu in the organizer and ensure that Details is checked.
Brian

Continuous saving data and showing waveform

I want to continuous saving data and continuous watch the waveform on the graph..
Now after saving one time, the waveform just stops and freezs. How can I make it continuously working?
Do I have to use loop ?

You need to show what you currently have so we can figure out your system and figure out exactly what you are looking for.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

HT3805 My Aperture 3 just crashed, i.e., it would not open and showed an error message -1712. I sent the current version to trash and reinstalled from my A3 disk, but after installing again it still says "Aperture can not open -1712."

My Aperture 3 just crashed...by that I mean it would not open and showed the message: "Aperture 3 cannot open. -1712." I have the latest A3 version and had been using it continually for 3 years. This was the first crash. And it will not open as often as I tried.
I am using a 13" Macbook Pro with OSX 10.8.5.
I tried sending the A3 application to trash, and reinstalling from my A3 disk. Install message said "installation successful." But A3 would still not open and gave same message with -1712.
Any suggestions what I should do or try?
Thanks

Perhaps your Aperture library was damaged, when Aperture crashed. What where you doing, right before the crash happened?
- If you installed new software - programs, plug-ins, preferences panels, check, if they are compatible.
- If you imported new images, you may have imported corrupted files, that crash Aperture.
Can Aperture launch correctly, when you try to open a new Aperture library?
Hold down the options-key, when you launch Aperture and select to create a new library. Import a few images. Does that work?
If Aperture will launch on a new Library, try to repair your current library. Hold down the key-combination option-command ⌥⌘ firmly while double-clicking the Aperture library to open in First Aid Mode. Hold the keys down, until the panel appears, and then try the First Aid Options in turn.
I have the latest A3 version
Is it Aperture 3.4.5? The latest Aperture 3.5.1 will not work with Mt. Lion.

TS3694 Please how do I handle this. I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an error message that it cannot be downloaded with code1015.

Please how do I handle this?
I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an unknown error message that it cannot be downloaded and the code of the message 1015.

This is usually a result of the iPhone being hacked with the cutsie term for that "jailbroken".
http://support.apple.com/kb/TS3694#error1015
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Date and Time Variable error Plz guide

Gurus
When I write the query for time and date I keep getting error message mentioned below, plz guide
DECLARE @ArrivalTme Time;
SET @ArrivalTme = N'18:22';
SELECT @ArrivalTme;
GO
Msg 2715, Level 16, State 3, Line 3
Column, parameter, or variable #1: Cannot find data type TIME.
Parameter or variable '@ArrivalTme' has an invalid data type.
DECLARE @OneDay DATE;
SET @OneDay = N'10360610';
SELECT @OneDay AS [Day to Prevail];
GO
Msg 2715, Level 16, State 3, Line 3
Column, parameter, or variable #1: Cannot find data type DATE.
Parameter or variable '@OneDay' has an invalid data type.
Faisal Baloch

Hi Faisal,
which SQL version do you use? In 2005 there is no variable "date" or "time", instead of this you have to use "datetime".
http://msdn.microsoft.com/en-us/library/ms187752%28v=SQL.90%29.aspx
Regards Steffen

VisualRF not starting and showing communication error timeout

Problem:
VisualRf is not starting and shows connection timed out on the Airwave GUI.
If we look at the visualRF logs, from the location /var/log/visualrf/visualrf.log
we can see the below error in the log:
2015-06-14 11:53:29,461 WARN Inventory com.airwave.amp.RoleParserImpl Existing login cookie is null. Initialize amp login.
2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl Failed to initialize session cookie.
2015-06-14 11:53:29,479 ERROR Inventory com.airwave.amp.RoleParserImpl prepareMethod
java.lang.Exception: Failed to login.
Diagnostics:
When we look at the below error,
java.lang.Exception: Failed to login.
We could see that VisualRF is trying to login to Airwave database and failing to login for whatever reason. When we look at the Airwave database for this visualRF user, we could see this below:
The highlighted username in Yellow is the visualRF, VisaulRF creates this username randomly and we could see that login_attempts for this user is 10 and Airwave disables the user after 10 attempts. Therefore that explains why is_enabled is 0.
This could happen for different reasons, when we restore the visualRF backup and backup has some issues or when we do a vrf bootstrap, to do a factory reset on visualRF or could be any other reason.
Solution
To resolve this issue, all we need to do is update the Airwave database to enable this user, as shown below:
[root@localhost mercury]# dbc "update users set is_enabled = 1 where username = 'AihmrH3MHQ';"
once done, VisualRF would start working normally.

Got the screenshot, thanks. And hello again Rob
Follow-up:
2) Not sure that it matters, but what's the url you see in the BrowserLab UI after making the request? What path do you have defined as the Local Site Path in your site definition in DW?
3) How are you requesting the screenshots? From the BrowserLab panel inside DW?
4) Open up the BrowserLab panel in DW and see what the drop-down control is set to. If it doesn't say "Local" change it to Local and press the preview button and let me know what happens.
6) I want to make sure that none of the assets your page(s) need live outside the directory you've got within your DW site definition.
Thanks,
Mark

Smartform output not displaying, no formatting affected on output and shows formatting Error.

Hi Guys,
I am new to SAP and working in Smartforms now. I am facing an issue that the output screen is not showing any formatting done during the design phase. Not even font changes are displaying, instead only showing the default Courier font. No Bold as well as italics too. And borders also showing some problems.
It was working properly till the last day and suddenly it gone faulty. Hence I cannot run the form and when I try to run it, it displays nothing. I have been designing a Tax Invoice. When I tried to execute the smartform from the form itself, it was showing Formatting Error.
What is the solution for this? I am using ECC 6. Please share your views.

Hi Sanjeev,
I've not made any changes to the formatting (Fonts and Borders) and I cross checked it many times.
Everything is fine and Times used everywhere as Font. It is showing the same in the design too but in the output, it comes as Courier !! (May be default settings in case there is some exceptions, I don't know)
I tried another report, pick list form, which too showing the same things. As we have developed only two reports, we cannot check more. The standard SAP forms are displaying as is, but the problem is with the newly designed ones.(Standard forms too are displaying in Courier font)
I think it might be any problem related to the output graphical properties of the smart forms...!!! I am not sure but I need expert advice from you if there is any such scenarios...

My itunes was being updated then it stopped and showed an error message

I download the newest version of Itunes on my PC windows 7 and then half way it stops and shows a message that says something about me to "manualy update the itunes" The only reawl resason i wanted to download a new version was to download the new software for my iPod touch,

I have the same problem on my windows xp, it gets to the end of the instalation process then tells me that older versions of apple updates couldn't be removed. ive tried using the control pannel to remove the apple software, ive manualy deleted it restarted my computer, but still itunes wont update. I'm stuck with no itunes, i cant update my touch, no access to my podcasts or music, if i had knowen this would happen i never would have tried to update. does anyone have any ideas as to what i can do to reinstall itunes.

My iphone 4s is not being connected to laptop and showing an error message as it is unrecognised device

my iphone4s is not being recognised by the laptop...it is showing an error message as unrecognised device...wat would be the problem?? plzzz help!!!

Some clarifying questions, in hopes that the answers will help somebody help you:
What kind of connection (USB, WiFi, Bluetooth)?
What kind of laptop (MacBook, Windows PC; running what operating system level)?
What kind of connection are you expecting, for what purpose?
Was it working before, or is this the first time you have tried this combination?

Evgts Input Template Retrieving no data and shows #RFR Errors

Similar Messages

Maybe you are looking for