Evince doesnt work

Hi,
Days ago, evince stops working with pdf or djvu. And the error messages are
Unable to open document "file:///.....pdf"
File type Text Document (text/plain) is not supported
Unable to open document "file:///.....djvu"
File type application/octet-stream type (application/octet-stream) is not supported
Then I tried to downgrade to evince-3.10.3-1-i686.pkg.tar.xz and evince-3.10.0-2-i686.pkg.tar.xz. They didnt work.
I also reinstalled those dependencies: dconf desktop-file-utils djvulibre gnome-icon-theme gsettings-desktop-schemas gsfonts gtk3 libgxps libsecret libspectre poppler-glib t1lib. No lucky.
Hope someone could tell me what I should do.
Thanks for the help.

ayekat wrote:
Are you sure you're trying to open an actual PDF or DJVu file?
Otherwise, have you tried installing e.g. zathura with zathura-pdf-poppler as backend to see if it's related to libpoppler?
Thanks for your reply.
1>There are actual pdf files, because right now I can use qpdfview to open them.
2>
sudo pacman -S zathura-pdf-poppler
then zathura can open pdf files correctly. But evince still doesnt work.
3>
1 extra/poppler 0.26.0-1 [installed]
PDF rendering library based on xpdf 3.0
2 extra/poppler-data 0.4.6-1
Encoding data for the poppler PDF rendering library
3 extra/poppler-glib 0.26.0-1 [installed]
Poppler glib bindings
4 extra/poppler-qt4 0.26.0-1 [installed]
Poppler Qt4 bindings
And "reinstalling poppler, poppler-glib" doesnt help.
Last edited by yjcong (2014-05-13 00:21:39)

Similar Messages

MSI GF4 Ti-4200 doesnt work with WindowsXP

I can't get the MSI display tools to work - it crashes,
the vbios.dll doesnt load, it also crashes.
the tv in doesnt work ,it crashes
the tv out doesnt work ,it crashes.
all the supplied software also crashes "application has encountered an error and cannot continue. sorry for any inconvenience"
the intervideo software (windvr, wincoder, winproducer) and MSI PVI software all crashes as well.
what's the deal with this stuff? ?(
I have a Dual AMD athlon Tyan thunder k7 motherboard,
MSI Ti-4200-VTD video card and MSI tv anywhere card.
is there any resolution for this?

I'm sorry gfilitti if I don't have my system listed, but I thought my question was pretty simple...
Has ANYONE been able to make the InterVideo WinProducer 2 software, that comes with the retail version of the MSI G4Ti4200-VTD64 card, work successfully under the Windows XP Home or Pro operating system?
If the answer is YES, then I will begin investigating why my system can't.
If the answer is NO, then I only ask for other people's recommendations of what software WILL work in place of that. I NEED those functions to work. That's why I paid extra for the VIVO.
All we've heard so far in this thread are NO votes. I would like to see just how widespread this is. If I can find ONE person who claims it works fine on his/her computer under Windows XP, then my NEXT question would be if they had to do anything different to make it run, or was it just a straight install? Did they add the program patch available from the MSI website? See where I'm going with this?
If you would REALLY like my system details, here ya go...
========================================
CASE - ANTEC SX1000II with 4 internal 8cm fans
POWER SUPPLY - ANTEC 400W "True Power" w/dual fans
MOTHERBOARD - MSI 645E MAX (MS-6547 Ver 2.0)
BIOS - AMI Ver 3.2 (10/21/02)
PROCESSOR - PENTIUM 4 2.0aGHz (Rev/Step 2/4(9) )
MEMORY - 1 Corsair 512MB DDR RAM (Winbond chips)
DISABLED IN CMOS - FLOPPY Controller, AUDIO Device, MODEM Device, Serial Port B, MIDI Port, and GAME Port
AGP SLOT - MSI G4Ti4200-VTD64 - IRQ 16
DRIVER: MSI 31.00
CAPTURE DRIVER - nVidia 1.08
SLOT 1 - Creative SB0090 Audigy Sound Blaster - IRQ 17
DRIVER - Creative 3.0.0.18 9/20/02
SLOT 1 - Creative SB1394 FireWire Controller - IRQ 18
DRIVER - MS 5.1.2535.0 7/1/01
SLOT 2 - NIC #1 D-Link DFE-530TX Ethernet - IRQ 18 (LAN)
DRIVER - REALTEK RTL8139 5.396.0530.2001
SLOT 3 - Adaptec 29160N Ultra160 SCSI Controller - IRQ 19
DRIVER - Adaptec 6.2.0.0 3/19/2002
SLOT 4 - EMPTY
SLOT 5 - MSI SYSTEM D-Bracket
SLOT 6 - NIC #2 NetGear FA312 Ethernet - IRQ 18
DRIVER - Windows XP Pro native driver
NOTE:
NIC #1 is for home LAN
NIC #2 is for Alcatel SpeedTouch External DSL modem
SCSI DRIVES:
ID 0 - COMPAQ (Seagate) ST318451LW, 18GB, 15K RPM
ID 1 - QUANTUM Typhoon Atlas II, 18GB, 10K RPM
ID 2 - Seagate ST39103LW, 9G, 10K RPM
ID 3 - Plextor CD-RW PX-W1219S
ID 4 - Toshiba DVD-ROM SD-M1201
ID 5 - EPSON Perfection 1640SU Flatbed Scanner
ATA/ATAPI DRIVES:
Primary Master - No Connection
Primary Slave - No Connection
Secondary Master - MATSHITA LS-120 Ver F523
Secondary Slave - No Connection
USB DEVICES:
DIAMOND SupraMAX 56K V.92 Model:SUP2920
Generic Flash Memory programmer and other assorted USB devices on occasion.
MONITOR - HITACHI SuperScan Pro 21 w/5-BNC input
========================================
BTW, I would think when investigating a program's FLAT refusal to run, that the MOST important things aren't listed in these signature files. It has to do with what ELSE is running at the same time. Which services are running and which are NOT? What memory resident programs are loaded at boot-up? Any service packs installed? How about any security patches from Microsoft? Which anti-virus software (if any)? Which DirectX version? Personal firewall? Etc., etc.
Granted, the hardware DOES have a factor, but I feel all of these are MORE important factors than the speed or brand of a persons hardware. I look at the signitures more as bragging rights than anything else.
Now, this is just my opinion and may not reflect the feelings of the more sane people around me.
Cheers!

Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
Good luck - take the issue as high up the food chain as you can and see what happens.
Clinton

On Safari, ipad connects to the internet. But when in applications such as Keynote, I try to e-mail presentattion it doesnt work.

I am a teacher and have my own iPad with a data plan. We also have a router in teh classroom for wifi, and it has a very strong signal. On Safari, the ipads can connect to the internet. But when in applications such as Keynote and HTML Egg, I try to e-mail presentat. or post website to web, it doesnt work. I tried re-setting the proxies and the router, no luck. Please Help! I am a teacher and want my students to be able to post their websites on to the web, and e-mail themselves and their parents their Keynote Presentations.

Try this. Turn your iPad Off. Then disconnect the power going to the router for 30 seconds or longer. Then replug the power to the router (allow it to initialize) and turn On the iPad. Hopefully everything will connect. If not, see below.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt

I've just installed CS6 creative suite mainly for photoshop CS6. It comes with camera raw 7.0.something, but need something newer to use my canon 6d. When I download camera raw 8.5 and install the raw converter doesnt work anymore, wont even open or isnt available anymore in the plugin list. Tried to reinstall everything for a few times, but nothing helps.

When I search for updates the raw converter doesnt get update automaticly. Frustrating, is costing me the whole morning.

I am locked out of my computer (macbook air) I just got it back from the apple store and they reset it. I put in a new password, and now it doesnt let me log in anymore. Command R doesnt work, all i hear is a sound, but nothing happens.

I just got it back from the apple store and they reset it (becuase it kept shutting down and not turning back on).
I put in a new password because i needed to start over from factory settings, but now it doesnt let me log in anymore. (I don't know if this is because it doesnt accpet my password, or I forgot my password in less than 5 minutes, or because when i typed in my new password, i typed it in wrong twice)
Command R doesnt work, all i hear is a sound, but nothing happens.

What I don't understand is why it is rejecting a password I am creating.
Perhaps the password you are creating is too short, or has characters that are not allowed, or is not secure enough because it is a word in a dictionary.
FileVault may have standards for what it considers an acceptable password. If the password is part of the 128-bit encryption scheme, it might have to be 16 characters, for example. (Don't know if that is true, but it's a possibility.) Check your documentation for password requirements.

Scrolling and rightclicking with magic mouse doesnt work anymore

Suddenly scrolling and rightclicking with magic mouse doesnt work any more. Left clicking and cursor moving works normal. I have checked the system preferences for the mouse and find nothing strange or unchecked. Any ideas?

Also tried the universal access thing. Doesnt work.

People Cannot Hear Me When I make Calls on iPhone 4, Bought a new iPhone 4, uploaded all of my own information from the backup, and it still doesnt work, help!

I went in to apple, they couldnt figure it out, I am on AT&T so I was figuring on going into their store today and seeing if its something with the network, if not I am going back to apple, but this is literally a brand new phone i bought yesterday, not refurbished or anything, brand new, does anyone know why this isnt working? Everything else works fine, the mics both work, its just when I make calls or someone calls me the mic doesnt work.

When you see the same issue on more than one hardware device, it means that the problem is likely to exist outside of the hardware. Two things to investigate would be the software/firmware on the backup and issues with the cellular network. It's probably safe to rule out the cellular network as well.
First, make sure that you have imported copies of all the information (pictures, videos, documents) on the device. Do this thorough itunes, and the applications (photographic and document processing) on your computer. Perform a firmware update then restore the device as new. If the problem persists, then you may actually have the worst luck and discovered two devices with an identical issue.
Read each of the steps before initiating the DFU.
!. Connect the iPhone to any computer running a fully updated version of iTunes.
2. Press and hold both "home" and "sleep/wake" buttons
3. After eight seconds let go of only the sleep/wake button.
4. Keep holding the home button until you see a popup mesage in iTunes.
5. Read all all the popups, then use iTunes to update the iPhone's software.
If the popup fails to show, repeat steps 2 through 4

My iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?

my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?

Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore

My GX630 doesnt work properly on Windows Vista 64 bit

Hi,
I have problem with my GX630, its doest work properly at W Vista 64 bit, exactly Sleep mode ... its imposible to awake my computer nd I have to turn it off and than on to wake it up ...
those buttons Turbo nd Eco mode doesnt work.
sometimes happen that i get blue error screen and reset but I dont know why ... it wrotes something with some .dll file ...
some people told me that its error is caused by that thing that there are no drivers for 64 vista yet ...
I would be pleased if someone could help me up to this topic or to my email (removed to protect user privacy) or ICQ (115-378-414) thank to all of you Jabu

"sometimes happen that i get blue error screen and reset but I dont know why ... it wrotes something with some .dll file ... "
What is the BSOD error code? What .dll ? Write down the exact error.
Do you OC your notebook?
"some people told me that its error is caused by that thing that there are no drivers for 64 vista yet ... "
Install Drivers from MSI web:
http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=135&prod_no=1513
"those buttons Turbo nd Eco mode doesnt work."
You need SCM: http://global.msi.eu/index.php?func=downloaddetail&type=utility&maincat_no=135&prod_no=1513
But x64 bit is N/A.
Why you use x64bit version anyway? Why not 32bit?

I purchased an app namesd FLV Explorer and it doesnt work and it keeps crashing and i sent a report to itunes so they can refunde my money back but they wont answer me back :( please help me :(

and it doesnt work and it keeps crashing and i sent a report to itunes so they can refunde my money back but they wont answer me back please help me

We are all itunes users just like you. We cannot refund anything.
There are no refunds, but you can try contacting itunes support. Click "Support" at the top of this page, then click the link under "Contact Us"

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem.

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.

I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.

iOS: Unable to update or restore

My Ipod Touch conects to my wi-fi, but when I open safari, or any other app that needs internet, it doesnt work. what should I do and why is this happening?

My sister bought me an ipod touch less than a month ago. when he first came, he was conecting normal to my wifi, but today, he isnt. I use the same wifi at my laptop, and its perfectly working. My ipod identify the network, conects to it, but when I open an app that needs it, it doesnt work. What should I do?
And why is this happening?

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Re: i was charging my iphone 3GS yesterday in electricity when once it turned off suddenly while it was in quarter battery. I tried charging it again but it didint open, i tried to plug it into my laptop but itunes didnt recognize it and it doesnt work.

Hello candymerna,
At this point I would recommeng resetting the device if if will not turn on.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If it does turn on, but will not charge then take a look at this part of the article iPhone: Hardware troubleshooting found http://support.apple.com/kb/ts2802
Power/Battery
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
If it is charging, but not recognized in iTunes take a look at one of these articles depending on your Operating System.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
or
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
Cheers,
Sterling

Evince doesnt work

Similar Messages

Maybe you are looking for