[evince] image printing is disabled

.. at least it is so for png and jpg. With pdf and djvu files printing is enabled. I have not gnome installed - openbox is in use. Optional deps list hasn't anything related.
Where to dig in?

hokasch wrote:I use evince only for pdf's, but just tried with a png and print is greyed out here as well (full gnome).
Aha... Thanks for the information! I can not imagine default gnome file viewer isn't intended to print images. What do you think?
In fact I'll be happy with any other DE-neutral image viewer with decent printing capabilities (rotate, scale, ...). Can anybody suggest one?

Similar Messages

Order Prints button disabled Yosemite, iPhoto 9.6

I tried to order prints today and found out that I can't the order button is disabled. How can I re-enable the button?
Notice the image behind on top, is selected, but the Order Prints is disabled.

Do you still have the original library that you used iPLM to rebuild. I as because I didn't see anywhere that you used iPhoto itself to repair the database. If you still have it try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

Driver wizard says The drivers of your printer are disabled, but doesn't fix.

OfficeJet 6500 E709a series. Windows 7 64-bit. Printer operates from Word, emails, Copy function. Two programs, Photoshop and Printshop, no longer print when directed to print. Printshop says "Install a printer." Print Shop has tasks in printer queue and won't print. Hp Driver Wizard says,
The current full HP software is already installed for the selected printer but the basic functionality drivers appear to be missing or configured incorrectly. Click Next. After the click: The drivers of your printer are disabled, Click next to enable them.
These responses spool with no further option.
This question was solved.
View Solution.

Hi there mandrelliott,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How to Fix Disappearing HP Printer Drivers -- Disable HP CUE Device Discovery Service

I have a new HP G60-530US laptop with Windows 7 installed (less than 2 months old). It is connected to an HP 7410 All-in-One Printer and a Brother laser printer.
Three times now, the HP 7410 printer has mysteriously disappeared from the installed printers. The Brother printer does not disappear.
To re-install the HP 7410 printer requires disabling the AVS using the Services,msc utility (not just shutting down the AVS (Panda in my case)). It takes 20 minutes or so to re-install the HP printer driver software.
HP tech support is clueless about the cause or cure for this.
The laptop people referred me to the printer support people and the printer support people referred me to the laptop support people. The last tech support guy suggested that I restore the system on the theory that if the problem persisted it would be a hardware problem and not a software problem. He seemed to miss the fact that the disappearing printer driver software only occured with HP printers.
HP technical support was worthless.
Some internet forums suggest that this occurs when HP machines are connected to different networks. I noticed my problem occur after I took the laptop on a business trip and connected to a different wireless network.
On Vista forums, I've discovered that the disappearing HP printer drivers has been a problem for some time over a wide range of HP printers.
The solution identified on those forums is to stop and disable the HP CUE Device Discovery Service. Apparently, this service is used to detect HP printers and add them to the HP Solutions Center software.
In my experience, the HP printer drivers disappeared when my laptop comes into range of a "foreign" HP printer with wireless capabilities. For example, my laptop dropped my configured HP wireless printer when I went to an office that had a different wireless HP printer installed. The HP CUE service trashes the existing printer driver even though you do not intend to install and use the "foreign" printer. That would also explain why the printer drivers disappear when visiting a hotel or other location where any HP wireless devices exist. It would also explain why non-HP drivers do not disappear.
I've disabled the CUE Device Detection Service (using the Services utility). I'll see if that works. From what I've read, the CUE Device Detection Service is not needed after you have installed your printer, but it remains in your computer's active memory just "in case" you want to connect to a new HP printer and install software for that printer. Said differently, after your printer is installed, it remains as useless HP software that clogs your machine's resources.
A patch from Microsoft or HP (e.g., a patch that disables the CUE service) would be a big help to users if the number of posts on this issue are any indication of how pervasive this problem is.

This seems to be a common problem that exists for many HP devices, varying computer moakes and models and different operating systems. So, the conclusion must be that it is a HP issue. WHY ARE THEY NOT FIXING IT?
Based on this I am quite happy to buy a different make of printer so how does HP justify the continuing lack of support?
I posted a message about my C7180 All-in-one which had been causing problems but I put it down to me making (unrelated) changes to my system then noticed it got worse when I connected a new Trust digital pad. However, even when the pad is not connected I get the problem of disappearing drivers with the printer still visible.
What seems to happen to my set-up is it works when it is first reloaded and used, but the next time I open the HP software it fails and no other software is able to print/scan on the device.
Can somebody explain what the CUE is? I'll give it a try but I don't know what it refers to.
Who'd have thought that in the 21st century, software/hardware engineeers still can't make a simpy process for a computer. Whatever happened to the promise of plug'n'play?
P.

Images printing too small using Lightroom

I have an image that is 316x x 2317 pixels that I am printing using Lightroom 2.3 on Windows XP SP2. I use the Picture Package and add one 4x6 image to the sheet. I am using the Maximize template from the browser. The photo borders are minimum. The image nearly fills the page in the Lightroom viewer just as I expect. The image appears the same in Print Preview. However on my Epson 3800 the image prints about 30% smaller and offset to one corner of the 4x6 sheet.
The problem also occurs when printing from Photoshop CS4.
I am not scaling or resizing in the print driver. I uninstalled and reinstalled the printer using the latest driver.
Please help!!
Michael

Oh my...
It seems that, embarrasingly I was tripple checking everything for 4x6 prints but actually had 5x7 loaded in the printer!
Thanks for helping the hopeless.
Michael

Images print URL instead of image

I have developed crystal report which shows multiple images(stored as URL pointing to Unix box location where images are placed). Same is publised to Infoview where i can see the images properly.When i am printing the images,its not printing the image instead just showing the URL.
Please help how to resolve this.

--Which viewer you are using to Print ? ( DHTML, ActiveX, Java ?? )
--Whatever viewer you were using, can you change it in 'preferences' and see if you get same error in toher viewers?
--Are you flexible in using Printing the report after it get exported to PDF ? If yes, you can use this setting from CMC ?
--If you export the report to PDF and print from Infoview, does the images print fine?

Up graded to CS and images print out are green.

Hello,
I am using 10.4.11 operating system. I upgraded from Photo shop 7.0 to CS and all my images print out green. The printer is a Epson Stylus C88+. The images on my monitor look the same as 7.0. I do a nozzle check every day.
Does any body know why this happened?
Please help!
Many thanks,
Diane

wgross21947 wrote:
What can I do. Save current photos? Where?
You should always save your photos on computer like any other digital camera.

Image Printing Question

Hello,
Bottom line summary: How do I use the Media and Quality setting to get a good image?
I have an image printing question for an HP 8600 Office. I am trying to get a decent quality image to print
on regular paper. I gather that I will not get the quality of a photo printer. I gather I'm supposed to use
HP glossy paper. Please read on ...
Images come out grainy (rastery) when embedded from an MSPaint project, and if I use Word. However when I printed just an image from image viewer it came like a photo ... but I can't remember what I did. It definitely is capable of printing better. My cartridges all check out, etc. I did the Print Quality Report ... I sure wish I could get that quality when I print other things.
I tried messing with different settings from the Print - Preference. The Quality (Best, Normal, Draft) doesn't effect the outcome. I tried going into Print - Preference - Media and it makes a difference. I can't figure out which is the best setting for plain paper ... but it's not plain paper. The image rendering algorithm appears to be different for different Media settings. I also tried setting the Advanced Resolution to Maximum DPI. I haven't been totally methodical about this as I was in a rush.
I see that the printer is being "smart", perhaps a little too smart.
So my question is multipart:
- Is there documenation on the what the Print - Preference - Media settings do?
- How do I get it to not use grainy/rastery image method, but use the nicer photo method?
- Should I print Maximum DPI?
Thanks,
- Dave -

Hi @DaveGold , and welcome to the HP Forums!
I hope you had a great holiday!
I see you're looking into photo setup options. I'd like to help!
First I'd recommend this document on Changing Print Settings in Windows 7. This document should show all the settings you're looking into.
Also, another thing to keep in mind, when you select 'best print quality' and 'photo paper'. It will only be as good as the source image.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have CS4 and a new comp. & printer & still when i print the image printed is an 1/8 of the size

I have CS4 and a new comp. & printer & still when i print the image printed is an 1/8 of the size

See this support document. http://support.apple.com/kb/TS5185

Mirror image printing not desired

I have been an HP printer user for many years but this stumps me. Recently my printer will give me a mirror image of what I am trying to print. It usually does this with PDF's and Internet documents. I have gone into the Advanced tab to check to see that mirror printing is off but I still get it. I am currently using Vista and have tried to check for any updates.
I want to clear up this problem before I upgrade to Window's 7. Any help is appreciated!!!!!
Diane

spartanvboyce,
Here is a link to a post that has some good information on mirror image printing and what has worked for some other people. You should be able to go to Control Panel>Printers>right click on printer>Properties>under General tab click Printing Preferences>under Advanced Tab click Mirror Image ON. However, like i said others have had some issues with this. Hopefully you will find the link below helpful.
http://h30434.www3.hp.com/t5/Other-Printing-Questions/Printer-properties-keeps-changing-Mirror-Image...
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Reader X: Printing button disabled in secured file even though printing is enabled in security optio

Hi,
I have a document created in Adobe Acrobat 7.0, secured by a third party component, everything except printing is disabled in the security restrictions, but Reader X still disables the print button and the entry in the file menu.
The document works fine in the newest versions of Reader 7, 8, and 9 (all tests were don using an english Windows 7 pro 64 bit).
Is this a known bug? I haven't been able to find any mention of this problem.

So are you saying that you have a plugin installed in Adobe Reader X, which is used to open the PDF file - or that the plugin is solely present in Adobe Acrobat and the PDF file thus created is opening in a standard installation of Adobe Reader?
If the former, then as the Acrobat X Family SDK is not yet released to the public and there are significant changes in the plugin sandbox of Reader X (thanks to Protected Mode), I'm not surprised that it's having problems. Things that used to work in Reader 9 aren't in any way guaranteed to work in Reader X.

IPhoto 08 contact print problems - after 5 images. prints pt a screenshot

iPhoto 08 contact print problems - after 5 images. prints pt a screenshot

Okay - So, I teach photography and have my students print contact sheets from iPhoto version 08. I have one student (out of forty) having the following problem (I have removed preferences, reinstalled iPhoto, used the iPhoto updater for 7.1.5, reloading the printer driver and upgrading the system software to 10.6.8 {I teach in a high school, so no funds for newer software})
The problem is isolated to one student - the others on the same machine do NOT have the same problem. When this student selects more than 5 images, the resulting output looks as if he has taken a screen shot - the palettes on the left of the frame show and the titles he has inserted (using Batch Change) are moved on to the pictures.
At this point, I am going to let him screenshot his submissions, just wondering if anyone else has had this problem.
Thanks!
Sandy Snyder

Image Printing Problem

I make use of Crystal 10. I have a report that print 1 page per record. This page include data and 3 images. Recently, this report started to print some pages correctly while other pages images printed black. Would appreciate if someone can highlight what happen because after rebooting the crystal report server, the problem goes away. Need to find the root clause and not reboot server all the time.
rgds,
Loh

Hi Loh,
Need a lot more info.
Are you using CR Enterprise?
Are you using a custom application you or someone else wrote?
You'll have to monitor the WEB servers resources or local browser cache etc.
What have you done so far to debug the issue?
Thank you
Don

Some images printing too dark

I have two cameras that I use with iPhoto 6.0.4. A Canon G4, and a Pentax ist D. In iPhoto both cameras have nice looking images. The images from the Canon make beautiful prints, but the Pentax images print too dark. How can I fix this? Can I set different printing preferences for each camera?

whenever I calibrate my iMac with the Spyder2 hardware, I have to calibrate it twice because I always forget to turn off the Screen Saver and the Energy Saver 'Put Screen to Sleep' option.
another important thing about calibration. where is your 'book located during the calibration? what lights or on or off? is there any direct sunlight shining on the 'book?
personally, I prefer to calibrate at night with all lights turned off. if I calibrate at day, I shut the tinted doors and turn all (fluorescent) lights off. I realise that you are supposed to calibrate under your normal lighting conditions but I prefer this method

Elements 12 Editor does not print out images as specified.e.g a 15cm x 10cm image prints out as 10cm

In elements 12 images print out truncated,e.g a 10cm x 15cm image,altho in preview seems O.K prints out as 10cm x 10 cm

Editor is set to print a 10.2 x 15.2 cm image on A4 paper in landscape
view and appears to be the right proportion in the preview pane.
"Editor is set to print a 10.2 x 15.2 cm image".
This is not clear to me. How/what is set?
A4 paper is 29.7 cm x 21 cm.
Are you trying to fill this entire sheet of paper with one image, or are you trying to print a picture package?

[evince] image printing is disabled

Similar Messages

Maybe you are looking for