EVO LTE connection issues

I found this interesting. I'm having problems with connection on my phone. I had a EVO Shift, no connection issus.
After pointing out our own findings as well as the forum complaints, Sprint communications manager Natalie Papaj replied, “We are aware of the issue and are currently investigating it. I will keep you posted as I know more.”
This is on http://www.techhive.com/article/2000138/htc-evo-4g-lte-signal-woes-confirmed.html

These are indeed hardware limitations so flashing new software won't solve anything unfortunately.
There are different versions of the Z3+ intended for different markets (different bands). The Xperia Z3+ dual/E6533 supports the following bands:
GSM GPRS/EDGE 850, 900, 1800, 1900 MHz UMTS HSPA+ 850 (Band V), 900 (Band VIII), 1700 (Band IV), 1900 (Band II), 2100 (Band I) MHz TD-LTE (Band 38, 39, 40, 41) FDD-LTE (Bands 1, 2, 3, 4, 5, 7, 8, 17, 20)
If your operator uses these bands there shouldn't be any issues.

Similar Messages

Please update Lumia 920 LTE connections issues.

just want to say that this is a wonderful device.
I am having issues with LTE intermittently connecting. I have to reset the phone to correct sometimes.
Will there be a update that addresses this?

To be honest. I have four identical 920's in my house. The other 3 people using them aren't heavy internet/data users. As soon as I used internet connection sharing (works perfectly by the way - also made sure WIFI stayed on with lock screen) my phone no longer connects to LTE as the preferred freq choice. The other phones have never done ICS and they are all constantly on LTE and never switch down. My set is constantly on 3G or 4G. If I travel, and the LTE connection is strong, then the phone does go there but typically not. I believe its a WP8 issue. Please fix because I'd like to appreciate the LTE speed that is offered here.

IPhone 6 3G & LTE Connectivity issue

We purchased an iPhone 6 the day they were released. My son said the 3G and LTE stopped working about 3 days after getting it. Wifi is still functional. We have tried everything to reset the system and any little work-arounds we have seen. Nothing works. He installed IOS 8.0.2 and we were under the impression that would solve the problem. Nope! Any other ideas as to how to solve this? I'm heading to my Bell store this week for further investigation but it would be great to solve it before then.

Hey there tracturk,
It sounds like the cellular data on your sons iPhone 6 is not functioning properly even after you reset the phone and updated to iOS 8.0.2. I would recommend the troubleshooting in the following article to help resolve the issue with the phone:
iPhone cellular data connection issues
Follow these steps for help with cellular data issues on your iPhone. After performing each step, test to see if your iPhone still has the issue.
Toggle airplane mode: Tap Settings, turn airplane mode on, wait three seconds, and then turn off again.
Restart your iPhone.
Make sure that your software is up to date:
Check for a Carrier Settings Update: Tap Settings > General > About.
Check for an iOS Software Update: Tap Settings > General > Software Update.
Some updates may require a Wi-Fi connection.
Remove the SIM Card and reinsert it. Allow the iPhone to acquire the network again.
If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Phone > SIM PIN.
Try another location. If a different location works, but the original location still doesn't, contact your carrier to report the issue.
Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
Resetting network settings on your device will erase all current saved settings, including Wi-Fi passwords, preferred networks, and VPN settings.
Restore the iPhone as new.
Contact your carrier to:
Verify that the iPhone is properly set up on the account with the appropriate, current data plan.
Verify that there are no account-related blocks.
Find out if there are specific error messages in the carrier logs that could help determine why the issue is occurring.
If none of the above steps resolves the issue, contact your carrier, make an appointment at an Apple Retail Store, or contact AppleCare.
Thank you for using Apple Support Communities.
Regards,
Sterling

Anyone having LTE connection issue after updating to 8.0.2.?

After updating my iPhone 5S to 8.0.2, I can no longer connect my phone to LTE but my iPhone 6 plus is fine. Anyone having the same issue?

Loner T wrote:
From Loss of cellular service or ability to use Touch ID after updating to iOS 8.0.1 on iPhone 6 or iPhone 6 Plus
The Health app won't work in iOS 8 after these steps. It will be fixed in our upcoming iOS 8.0.2 software update.
Last Modified: Sep 25, 2014
There is no IOS 8.0.2 out yet. There is no patch for iPhone5s.
This update is specific for iPhone6/6+ as indicated
Download the file below that corresponds to your device:
iPhone 6
iPhone 6 Plus
8.0.2 is out. But if it's true that 8.0.2 is only for iPhone 6 or iPhone 6 Plus, WHY would it appear on devices that aren't 6 or 6 plus? I have two 6 phones and the update went fine. But the update also appeared on our iPad's, which I downloaded and that went fine as well.

LTE Connectivity issue

I updated my iphone 6 to ioS 8.1 last night. and since then i have gone thru two stints where my phone will be unable to visit websites, send texts, use internet based apps. Last night it fixed itself but im now approaching 3 hours where i cannot do anything that requires LTE despite being connected to it. No wi fi in the area to connect to. Anyone having similar issues?

reset, no data loss. hold down the home/sleep button together until you see the apple logo and then release.
settings - general - reset - reset network settings.
if both don't help, then you will need to contact your phone carrier as LTE - cellular data is a carrier feature.

Connectivity issue with ipad 3

anybody having connectivity issues with new ipad 3?
mine won't connect to wifi.
when i switich to cellular 4g lte, that doesn't connect as well.
my macbook pro and iphone connect, with no prob.
i get various can't connect to server messages.
took to genius bar, we erased and rebooted, it worked for a bit but happening again. genius bar staff claimed it was a corrupted file, but i think its more than that?
any thougths?
many thanks,
-L

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Zagg HD on EVO LTE

On my EVO LTE my screen goes black during a call. I've read the proximity sensor can be covered by screen protectors. BB installed the Zagg HD on my phone. Android Central says some of the early screen protectors covered the proximity sensor. Anyone had that issue?

Issue is still not fixed. I had BB put a new protector on that Zagg sent me, still the screen goes dark. It happened without a protector on the phone. BB says it's working normal, same from HTC. The screen is designed to come on when it's moved from your face, mine isn't, i need the keyboard so the screen has to come on to use the keyboard. I'm on my 2nd phone so BB won't exchage it again.

AT&T contract,suddenly lost my LTE connection on my iPhone 5

just have signed up an at&t contract for less than a month, and suddenly my iphone lost LTE connection a few days ago. no matter how many times i reboot or reset the network settings, my iphone just can't connect to the internet. strangely however, some apps (sns apps) are still able to send and receive messages. it really annoys me a lot. anyone here with the similar problem? really need some help. btw i'm in chicago

Hi jun xia,
If you are having issues with the AT&T LTE connection on your iPhone, you may find the following article helpful:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Regards,
- Brenden

Lumia 928 LTE/WiFi issues

I don't know if anyone else is having these problems, but it appears that my 928 only wants to connect to data over LTE unless I turn off the Data Connection in "Cellular" settings or I go into airplane mode with WiFi enabled. While this would be a terrible problem for me if I didn't have unlimited data, it still causes problems for me when my phone is receiving an LTE signal that isn't actually strong enough to transmit data on, but nonetheless shows up. At work, even though I am connected to WiFi all day, I usually don't get email updates because the LTE connection is not strong enough.
Any idea if there will a patch issued? I seem to recall one of the early WP8 lumias having a similar problem, but don't remember which one it was.
Thanks for any help / feedback

I have the exact same issue on my 928, WP 8.0.10327.77. **bleep**!!
It's really irritating to be sitting at home on the couch and to have to restart my phone if I want to use anything data related. It's even more embarassing to have to say to friends "hold on" while I restart my phone to look something up or check FB, whatever. The alternative is to change the setting to "use cellular data instead of wifi for weak wifi connections," despite having perfect wifi strength.
Other than this issue this phone is a gem.

My new 6 is showing LTE connection while my wife's 6 shows 4G... WHY?

My new 6+ is showing LTE connection while my wife's 6+ shows 4G... WHY?
all settings seem to be the same....

One of three questions answered. In order to help, we need to go through a troubleshooting process.
Have you talked to At&t about the difference?
Have you reset the network settings?
Have you talked to Apple about the issue?

HP PhotoSmart 7510 suddenly has severe connectivity issues

I have a HP PhotoSmart 7510 printer since about 2 months. Initial setup worked like a charm and the printer has been working pretty much perfectly for the last 2 months. Wireless printing, scanning and internet access on the printer (e.g. for Facebook photos) all worked. Just from time to time i would get the occasional (mildly annoying) message on my computer saying "scan to computer is currently unavailable" but it usually worked itself out and whenever I needed it to work, it did work.
But since a few days ago, it has some severe connectivity issues. I didn't change any settings on the printer, router or computer - the issues just started appearing by themselves. I startet getting much more frequent messages on my computer saying "scan to computer is currently unavailable". I noticed I couldn't print anymore, and restarting computer, printer and/or router didn't help at all. The only thing so far i managed to print wirelessly since the problems started were the first 5 pixel rows of an image I tried to print, the rest didn't transmit.
It seems the printer still connects to the WLAN but printing and scanning no longer work, and whenever I try to access a web service on the printer (like Facebook) it says it has no internet connection, even though the WLAN light is lit up (not blinking) and all the wireless status reports say "congratulations, no problems found" and display IPs etc. just like normal.
I looked at the threads "PhotoSmart 7510 connects to router, but not to the web.", "Wireless printer (HP Photosmart 7510) not connecting to network" and "Photosmart 7510 won't connect to Web Services" but they weren't a big help. Activating EWS didn't work because even though the printer showed its IP address to be 192.168.1.3, when I entered this in my web browser it didn't find the printers configuration page.
I tried the following steps from one of the threads:
1. Restore the Network defaults
2. Unplug the printers power cord while it is still on. Leave it unplugged and walk to the router.
3. While the router is still on, unplug the power cord from the router, leave it unplugged for 30 seconds, then reconnect the power cord to the router. Once plugged back in the router should power on automatically.
4. Plug the power cord back into the printer. Once plugged back in the printer should power on automatically.
5. Run the Wireless Setup Wizard to reconnect the printer to your wireless network.
6. Try enabling Web Services.
I followed these steps exactly. Interestingly, even though I had done step 1 and restored the network settings to factory defaults, after turning back on, the printer somehow still had its old settings saved and reconnected to the network.
It seemed to have fixed the problem, the printer finally had internet access again (Facebook app showed my photos) and scan to computer found my PC. But after just about 3 minutes, the printer had lost its internet connectivity again. When opening the Facebook app, it displayed the same error message it did before. And printing no longer worked as well.
So, what is wrong with this printer?! It has the newest software update by the way (I checked during the 3 minutes it had internet access.) My computer is a HP Windows 7 x64 machine (EliteBook 6930p) and the router I'm using is a Netgear WNDR3700.
I specifically bought this printer for my studies at university. In one week i have my exams and in order to study I REALLY need to be able to print some of my course materials! So any help as quickly as possible would be greatly appreciated. Or do you think this is a case for a warranty replacement, considering the printer's really strange and error-prone behavior?
Thanks a lot!

I can assure you that it is not a router issue. It appears to me that it is a driver compatibility with Windows OS. After trying to get to the bottom of this since my Photosmart 7525 was new and reading just about every forum and blog, I have come to the conclusion that the issue must be related to the HP driver itself.
The issue does not seem to affect any Mac systems, and from one forum someone was able to fix it by downloading new drivers compatible with 64-bit systems (which seem to not be affected by the glitch). But that leaves us 32-bit people stuck with the current driver which does not work.
The printer is connected with good signal to the wireless router (no matter who's router it is and what configuration is made). The printer can be pinged from the router and any computer on the network which is not currently being affected by this issue. However, the affected computer fails pings by either request timed out, or destination host unreachable. Pings are successful from the affected computer to any other device on the network. The only way to recover (at least for a few days) is to reboot the affected computer.
Also, from the display on the 7525, the network tests pass without issue. I can also download and print content from the internet with no issues.
Please do a quick google search of this issue and you will see several THOUSAND entries of people with the same request. This is a serious issue that people are having and everything is pointing to an HP problem (not routers, improper installation of software or drivers, etc...). I agree with several other customers that HP should be on the hook for this fix. I will give it another couple weeks, then back to the store for a reliable unit from another competitor (Canon, Lexmark, etc..)
Thank you in advance for escalating this issue to product engineering,
S. Hunn
There are 10 kinds of people in this world... Those who understand binary and those who do not.

Connection doctor and connection issues

I have nothing blocking my internet connection, however mail is a nightmare for me. I continually receive connection issues via the connection doctor for imaps, pops, and icloud.
Are my settings wrong? I have checked with each of the settings and they are set per instructions provided. Some are google, some yahoo, icloud, etc.
This is really annoying and I could really use some help.
Here is a typical message: Could not connect to this Google IMAP server. Check your network connection and that you entered the correct information in the Account preferences. Also verify that the server supports SSL. If it does not, deselect the 'Use SSL" checkbox in the Advanced tab of Account Preference"
I have done all of this and am still having troubles.
I am also receiving SMTP connection issues - "Trying to log into this SMTP account failed. Verufy that the username and password are correct."
I have checked and all are correct. Even more confusing, these issues are not present all the time - however I have not changed anything between when times are good and bad.
Sigh - I hope someone has an idea to help me out.
Thanks in advance for your time and thoughts.
Patti
I am running osx 10.8 mail 6.2 and use xfinity for my internet (as I mentioned, I disabled their firewall trying to fix this)

Hi there Japps1,
You may find the troubleshooting steps in the article below helpful.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
-Griff W.

Excel ODBC Connection Issues

I'm having some issues importing external data from an Oracle 9i database.
Here is what is happening:
I am initially able to import data from the table I want to into Excel.
I do this through "Data -> Import External Data -> New Database Query" where I have my .ORA data source. I'm able to log in using my user and password and import the table. My problems come after I import this first set of data.
If I try to "Edit Query…" I get an error box that says "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed".
If I try to "Refresh Data" I get two error boxes. The first is just: "[Microsoft][ODBC driver for Oracle][Oracle]" and the next says: "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed". It then prompts me for the User name and password of the DB I'm connecting and after I enter the information, I get the same two error messages.
Also, if I attempt to establish another connection following the "Data -> Import External Data…" steps I run into a different problem. Upon entering the information for the User Name and password prompt I get two error messages. One says "!" and the next box says "Couldn't read this file". Once I click "OK" in those boxes, the Microsoft Query window automatically opens with nothing in it.
I can't seem to figure out why I can initially pull down data and then cannot succeed afterwards. I'm unable to connect to the DB I have through Excel until I completely closed all Microsoft Excel instances.
I also use this data source in Microsoft Access without any problems.
My Excel version is 2003.
I'm using Oracle Drivers I'm using are from an "Instant Client" package.
Any thoughts why I'm having these connections issues?
Thanks in advance.

This issue is closed.
The solution was:
"Data -> Import External Data -> Import Data"
Select "New Source" and select the "Oracle" data source and filled in the appropriate information. This was similar to the database query but it actually works.

My brand new mac pro always had Internet connection issues at school. WHY is that? I see the school's Internet working perfectly fine on other PC's, but there is never a day where my mac doesn't have Internet connection issues at school. How do I fix it?

I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in class I always sit at. It's ridiculous and it's frustrating. I invested my money into this laptop and I'm beginning to regret it. I thought it was the school's Internet, but I don't see Internet issues with other PC users. It's most frustrating on registration days and I'm trying to register for my classes before it gets taken, but again... Internet connection issues. It's random. Majority of the time, it doesn't work at all. I've done Network Diagnosis and turning WiFi off then turning it on again. I've done everything I could. I put my money on this laptop and it was a lot of money. I could have bought an 800 dollars laptop and I would have Internet connection anywhere on campus. So, I don't want to continue everyday to regret on buying this laptop every time I try to connect to the Internet at school or Starbucks or anywhere else. How do I fix this? What's the problem ?
At school, I heard this guy had a problem with Internet connections too and he owned a new mac book pro. He said something like Apple messed up on something, but he fixed it. If I knew mac book pro's had these issues I wouldn't have bought it in the first place. It's freezing on me every other day. It's ridiculous. But what concerns me the most is the Internet connection. So someone please tell me what can I do next to prevent the problem? Am I doing something wrong maybe?

Hi Kevin,
I'm using an XLR input mic which is connected to the phantom power enabled XLR mic socket on a USB M-Audio M-Track. The M-Track is connected by USB to the Mac Pro - so effectively I've got an M-Audio USB soundcard with a mic input. I've also tried a microphone that is a straight XLR to USB cable (guessing with some soundcard chip buried in the usb plug) but that also yields the same effect of bad latency, intermittent quality, stuttering and repeating and echoing (without the speakers on during record so its not feedback).
The mic works absolutely fine with other recording applications I have on the mac at the moment - albeit non-adobe ones (tested it on the EasyAudioRecorder - and it lives up to its name. it's easy)
I will try with Audition and report back, but sitting here right now I can imagine it would work fine with audition too - it just seems to be the way premiere is set up for recording into the timeline is a bit sketchy. I'm willing to accept it might well be a quirk with the new Mac Pro trashcan - I'm not weighting all the woes on premiere.
Any thoughts or am I out of luck to sit with my fingers crossed for a fix in the next round of updates?
Nathan.

Connection issues with Safari 3

I'm having some connection issues with Safari 3.
When I connect wirelessly, Safari won't load any web pages. I go and use Firefox and everything is just peachy.
I've reset Safari, emptied the cache and whatnot. I went in and checked the permissions, everything checks out.
When I connect with Ethernet, there's nothing wrong, which is my dilemma.
Help would be greatly appreciated.

There are a number of posts in the Leopard forum from people with direct experience with upgrading from Panther to Leopard. Here is a relevant thread from there that should reassure you.:
http://discussions.apple.com/thread.jspa?threadID=1418714
Your system should be fine for Leopard, but you will probably need a current version of Photoshop if you don't already have it. See this download:
http://www.adobe.com/support/products/pdfs/leopardsupport.pdf
Also, Leopard doesn't run Classic (OS 9) apps.
One caveat - first make a bootable backup "clone" of your present system onto an external firewire drive so you can recover if anything goes wrong. You can use the "Restore" tab of Disk Utility to make such a clone, and there are also Panther-compatible versions of Carbon Copy Cloner (v 2.3) and SuperDuper (v 2.1.4), both excellent for this.
It's even possible to a create second Panther clone on a different external volume to create a "dual-boot" system, using that volume to continue to run old applications that you can't run with Leopard.

EVO LTE connection issues

Similar Messages

Maybe you are looking for