EVOC 20 Filterbank "jumps" at specific points

I love the EVOC 20 Filterbank, except for one thing.
During playback, it will inevitably choose a single point at which it "resets". Meaning, if I have it set to filter through two measures, it might play correctly for three beats, but then it would reset to the beginning of its cycle. After that point in the project, it plays normally, but its a huge distraction for the filter to mess up like that. Absolutely nothing I do can fix it. Creating a new region? Nope. Reloading the filter? Nope. Creating a new project, and using the filter in that? Works sometimes, but then it chooses another point at which to reset.
WHAT am I doing wrong here? Is this only happening to me? Can anyone help?
Thanks in advance!
Cliff

Thanks matt, that was exactly what I needed.
Unfortunately, with each breakthrough I find, a new problem is encountered. Now I have encountered a new problem when trying to change the simulated signals to real ones collected with the DAQ assistant. My code worked perfectly as I wanted when I used the 'simulate signals' VI, but now when I insert the daq assistant in its place (accompanied w/ 2 select signals VI's), the array is no loner filled with values.
It seems like rather than initializing the array as I wish (0 for all UV values and 25 for the temperature ones), It initialized the array with a zero reading from each analog input channel (which results in the -25 temperature values). It only records one value in the first column of the array for the 10 second interval, then reinitializes improperly, records one datya set in the first column, and repeats ad nausem.
Should I be using the advanced DAQmx VI's rather than the express VI?
Do I need to reconsider my whole timing structure for using real signals?
How can I get Program B to behave like my Program A?
-Ben
Attachments:
Program A - Simulated.vi ‏287 KB
Program B - DAQ.vi ‏444 KB
Signal Math.vi ‏36 KB

Similar Messages

Jumping to a specific point in a clip

How can I jump to a specific point/frame in a clip? Example: I know a clip is exactly 3:40 long. How could I go to 3:37?
Thanks.

If you have the clip loaded in the Viewer window and the Viewer window highlighted, it will take you to that point in the clip, if you have the Timeline highlighted, it will take you to that point in the Timeline. You can also save a few keystrokes by just hitting "3.37." to skip to 3 minutes and 37 seconds, for example.
-Zap

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

Hyperlink to a specific point on a page

I am trying to insert a hyperlink which jumps to a specific point on a page. The way I would like it to work is so that I have a list of headings - an index - and when you click on a heading it jumps to that particular chapter in a text.
So far I have only been able to get a hyperlink to jump to the top of a page.

Anchor
Search is your friend

Jumping at specific areas

Hi there
I am having an issue when playing back my rendered footage in the canvas jumping at specific time points though the playhead is moving smoothly. My main sequence consists of 2 embedded sequences, which play fine on their own. The embedded sequences are a mix of XDCAM EX 720p25 and DVCPRO HD 720p50 footage. Everything played fine initially then this shuttering happens at specific areas. Interestingly, when I delete the embedded sequence and re-add it to the timeline again from the browser, everything is fine. But once I render, it start up again.
Any clues will be highly appreciated. Cheers, Hisham

Okay,
I will give up on this, as I can live with it. Anyway, thanks everybody.
Cheers
Hisham

How do I move video clips to specific points on a music track in iMovie?

I am trying to make a lip synch video and need to move my video clips to specific points on a musci track so that the words are in time with people singing - does anyone know how to do this? At the moment, I only seem able to put the clips in one after the other...

Hi
IMovie is Video clip oriented - meaning that Audio can not be put in first and video/photos added later.
So to do this I use black photos that I fill up the Video with first
Then Add audio
Then add Video/photos by Cutaway function or exact replacement (in time).
This is so much easier in any version of FINALCUT where one can build Audio first then create the video ontop of this.
Yours Bengt W

How to find all those list of SAP standard and custom objects that are changed from a specific point of time

Hi all,
Please let me know the process to track or find all the SAP Standard and custom objects. that got changed from a specific point of time.
Is there any function module or any table where this change log is maintained.?
I just only need the details ,wheather that SAP standard or Custom object has got changed or not.
Thanks in advance

Hi RK v ,
I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
Have a look into table E070 and E071 .
Regards ,
Yogendra Bhaskar

QuickTime: can't move to a specific point when playing .WMA audio files

I use a lot of .WMA audio files recorded on my Olympus Digital Voice recorder. Since the latest update of QuickTime I cannot move to a specific point in a file. When I click and drag on the diamond cursor it won't move. The only way to move through the file is to play it or 'fast' forward it - which takes ages.

I have the same problem. when playing wma or wmv file, simply just cannot drag the progress bar to a specific position. Just have to progress from the very beginning to the end. Once it has been played to the end, I can move the progress bar. Very weird
I have both flip4Mac and perian installed with the latest version.
Could anybody please help.
cheers

How to rewind to a specific point?

I have a 30 gig. Ipod on which I like to listen to audible.com books. I just got a new Nano. On my 30 gig Ipod, I can rewind or fast forward to a SPECIFIC point of the book, not just to the very beginning or to the end. I can't seem to do this with the Nano, which allows me to go only to the very beginning or to the very end. What am I doing wrong? Thanks so much in advance.

Whilst listening to the audiobook, and the iPod is in the 'Now Playing' screen, press the centre button once. A small diamond will appear in the time scroller ad the current time point. Just use the scrollwheel to get to the time where you want to listen to.
Hope that helps

Zoom into a specific point on a clip

How do I zoom to a specific point on a clip or picture?
Whenever I try to use this feature it just goes to the centre of the clip.
Thank-you.

Make sure Image + Wireframe is selected in the Canvas:
Select the clip you want to zoom in on and reposition on the timeline by clicking on it. Once it is selected on the timeline, the turquoise box and cross hairs should appear in the canvas.
If you click and drag on one of the boxes on the corner, you can resize your image:
And if you click and drag on the image itself, you can change the clips position:
You may need to change the canvas display scale to see the handles after you zoom in:
MtD

Is there a way to draw gridlines at a specific point on a bubble chart?

I'm using Xcelsius 4.5 and (trying to) creating a bubble chart. I am using static min/max values for the x and y axes, but rather than drawing the gridlines in 1 or 2 divisions (i.e. the midpoint), I want to draw a grid line (both x and y) at a specific point -- is there any way to designate this point in Xcelsius?

I figured it out - I just adjusted my formula to draw the min/max such that my intersection is always the midpoint

Can I set a specific point on the page to go with a button?

I got a page of 1024x3072 and i need set a button to go on a specific point of the page, for example, from 650px to 724px just using a button.
So, my question is ¿can i do that?, ¿how?...Thanks

Not supported.
Bob

Is it possible to hyperlink to a specific point in a video?

I'm trying to create a DVD-style menu page within keynote.
Ideally what I'd like to do is have a video on 1 slide and then create a series of hyperlinks on a menu slide that would hyperlink to specific points within that video.
Anyone know if this is possible?

You could use iMovie to split the video clip into each section as well. Do you need the option to play the entire video clip from start to finish? If not, you can have each video clip be its own Keynote file and have Hyperlinks to each individual Keynote and then there will not be one large file, but multiple smaller files. This of course will not work if you want to play the movie straight though.

Adding static images to map at specific points in time

Hello,
I am trying to create a power map animation and I am having difficulties figuring out how to go beyond simply animating the data over time. let's say I want to add a little image of the space needle in Seattle when the animation gets to the point in
time when it was built. Obviously, I will be in the process of animating my normal data when this image gets added. Also, if you know of any tutorials that might be relevant please mention them.
Thanks,
Bob

You can add static images at a point in time and these are done by adding an annotation to a specific point that is plotted on your map. Once you pause the tour at a specific time you might want to add a scene to the tour and then add your annotation.
In order to add an annotation you will need to select the point and then right-click and select 'Add Annotation'. You will then be able to add a title along with either text, a field from data set, or an image. At this point you can continue
to plat the tour and/or add another scene and continue to build out your tour.
Check out this article on inserting annotations to Power Maps for additional information
http://office.microsoft.com/en-us/excel-help/add-an-annotation-to-my-power-map-HA104106344.aspx

Let a name following a specific point in a video

've looked everywhere but found nothing
is there any way to place a text and let it follow a specific point in the video ?
example, I place a name in text above a certain person and this name will following the person
Search everyway but cannot find it
thanks !

that is simple done with a 50$ investment to Motion5 ...
which offers a Tracker.
have a look (quick'n dirty test!):

EVOC 20 Filterbank "jumps" at specific points

Similar Messages

Maybe you are looking for