Evolution 2.12.1-1 has gone slow

Is it just my machine or has evolution gone slow for other people?
Examples are:
I'm seeing a "formatting message" message flash up while stepping through mails
When replying to mails if the cursor wraps down a line and has to push other text downwards it can sometimes take a couple of words of typing before the display catches up
Redrawing the gui if I've changed desktops and then come back can take up to a second
general start up is now slower than it used to be.
None of these changes make it unusable but compared to the last version it is definitely noticeable. It seems to be something to do with the graphics engine rather than the smtp/network part.
I'm on version:
extra/evolution 2.12.1-1

very slow for me as well.
additionally, if I let it sit for a while I am no longer able to reply to messages at all. the reply button stays depressed and the whole application becomes unresponsive until I kill it.
on the flip side, the global address book via Exchange now works great. just wish I could reply to people, that's all...

Similar Messages

Since Flash 9 my internet has gone slow

Can anyone help? since i installed flash 9 as an update my
internet has gone mega slow. Every page with photo's takes forever
to load and its so annoying. How can i go back to my old flash
player so atleast my pages load up quickly like they used to. Any
help will be really appreciated guys.

quote:
Originally posted by:
minimalmagic
Can anyone help? since i installed flash 9 as an update my
internet has gone mega slow. Every page with photo's takes forever
to load and its so annoying. How can i go back to my old flash
player so atleast my pages load up quickly like they used to. Any
help will be really appreciated guys.
I wouldn't advise reverting back as a solution, i had the
same issue and after another reboot it corrected it. So just try
rebooting again, and see if that has an effect.

My ipad 2 internet connection has gone slow

i have an ipad 2 running IOS5.1.1
first my safari has gone so slow that it doesnt even open the page unless i refresh a couple of times
then i went to the app store and also the facebook app they both were super slow or they wont even load
i thought maybee it my connection but i tried on both wifi and 3g its the same
also i tried my iphone 4 on the same wifi connection it was normal , and tried my friends ipad 2 also and it was normal too
the only thing thats seems to work fine is the google chrome browser .. it loaded the page within 2 to 3 seconds !!!!
i tried doing a reset with the home and the power button twice ... still no luck
cleared the history and the cache and the cookies on safari ... didnt do any good
is there anything i can do other than restoring the ipad
i have i cloud back up on but because connecting to the internet is messed up i cant find out when is my last back up and i dont want to loose anything

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
Try This - Renew IP Address:
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Browsing in Safari has gone slow, Chrome 5 is super fast, how do I fix it?

Hi everyone,
I've been experiencing slow browsing speeds in Safari for some time now, and I've always thought that it was my ISP. Eventually I got used to it and I stopped worrying about it. Today I downloaded Chrome 5 out of curiosity and I was blown away! I mean, this thing is so instant on almost every page! Then I remembered that Safari used to be somewhat like that some long time ago...
So what on earth is going on, how do I fix it? I don't want to have to rely on Chrome because that doesn't fix iTunes, which is equally slow when browsing the iTunes store. When I mean slow, I don't mean that it is unusable like some other people have reported. It's maybe x5 times slower than Chrome. I.e., pages don't just appear instantly, but I can instead see the individual images and text that comprise them taking their time to load. Some benchmarking in the developer tools shows that the delay is attributed to both longer latency times per resource, and at times actual loading times too. Benchmarking a complex page reveals that it needs 1.2sec in Chrome 5, and almost 5sec in Safari 5 on my computer. So there is certainly something weird going on there.
I have tried a few things that have been suggested to others, but none worked. Also, the DNS in my preferences points to the router within my intranet, not to some bizarre external site (i.e., 192.168.0.1). I am connected to the router with a cable. The problem first appeared long time ago when I was working on a MacBook Pro. The problem persist till today on my iMac 27", which came fresh with OS X 10.6.3 - I did use the migration wizard though to transfer all my stuff from my Mac Book Pro to the new iMac. I can verify that the problem persists even with Safari 5, without any plugins added to it.
Any help would be greatly appreciated.
Thanks
Dimitris

I haven't installed any plugins as far as I can remember. I tried looking for menu "HOME > Library > Plugins" in Safari, but could not locate it. Perhaps it is a path in the file system? In that case, I don't have a Plugins subfolder (i.e., I only have <home folder>/Library/).
A also just tried OpenDNS out of curiosity, and there was no improvement. Chrome however became just slightly slower. Also, I would like to alert other members of the forum that may read this thread, that openDNS makes money by selling their browsing preferences to advertising agencies (refer to their small print for more details). I also tried Google's similar service (http://www.chromeplugins.org/google/chrome-talk/google-dns-8877.html) which is supposed to respect privacy (again, according to their terms and conditions), however that still did not improve the situation. Again, Chrome was just slightly slower. At the least, I was very pleasantly surprised to find out that my ISP offers really fast DNS resolution

My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

My Mac has gone really slow since upgrading to Mavericks. Any suggestions as to how to speed things up again?

First, back up all data immediately unless you already have a current backup. If you can't back up, stop here. Do not take any of the steps below.
Step 1
This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
Step 2
There are a few other possible causes of generalized slow performance that you can rule out easily.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Reset the System Management Controller.
Run Software Update. If there's a firmware update, install it.
If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
Step 3
When you notice the problem, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the View menu or the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
Step 4
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Safari has gone very slow

Hi there
I have an iPod touch and have found that safari has gone really slow. It takes ages to load the page and zoom in and out also scrolling up and down. It al started when I let my kids aged 11 and 9 used it. They where not as careful as me when using it but I was supervising and they did not drop it or anything. I have rebooted it then reset it to factory settings in iTunes. I have taken off the apps that they put on there but it made no difference. It has been fine since ios 4 update came out so it had nothing to do with that. I always thought that safari was quite quick but now its unusable on some sites, manly sites with moving images. It is like there is not enough ram any more. I know its not the modem as the two computers that i have are just the same, pretty good and there both using safari. Its strange as my mobile phone with android did the same thing about 6 months ago and nether improved. The phone does it on any wifi and mobile network, so again it cant be the modem. Is there any thing I can do with the ipod to speed safari up, or is that it I cant use safari any more and use opera instead?
Thanks for any help

thanks both for the repliy
I now its not the network as its fine with everything else. Also I have already tried restoring the ipod with itunes and that didn't make any difference. I have now reset it like you said but that didn't work. Not sure what to do now maybe safari just want work like it use to. I forgot to say it is a second gen ipod touch so it is quite old now.
Any more help I would be very thankful for.

G5 Dual - DVD Reader has gone very very slow after Leopard

After 1 Migrate install and 1 clean install, I notice that reinstalling apps is taking 4/5 times as long as they should it's as if my DVD Reader has gone very very slow. I thought at first it was the migration that had caused FCPS2 to reinstall slow.
(Sony DVD RW AW-G170A 4 months old) on G5 Dual 2's)
FCPS2 wanted 19-hrs to install, I waited 6 hrs and then gave up. Luckily or unluckily as the case may be I used the time install Leo on my other Macs.
In the end I have installed Apps over the Firewire network connected to my other G5 Dual with the stock DVD drive, they are installing fast now.

Some more info about my setup:
*Simultaneous Dual band AEBS:*
Radio Mode: 802.11n only (5 GHz) - 802.11b/g
Radio Channel Selection: Manual - 161 (5GHz), 6(2.4GHz)
*Airport Express:*
Wireless mode: Extend a wireless network
Allow wireless clients checked under the name of the network (same as for AEBS).
Both are WPA/WPA2 Personal security. And both the routers were upgraded to 7.4.2 firmware this morning with the hope that it will help.
*N Devices (both working fine):*
Apple TV 40GB
2009 Model Mac Mini upgraded to Snow Leopard - working perfectly.
*G Devices:*
Thinkpad running WinXP
Dell Laptop running WinXP
Acer Netbook running WinXP
iPod Touch
iPhone 3G
Linksys webcam
_All of the above are working fine_.
+2008 model Mac mini -+ upgrade to Snow Leopard shows extremely slow wifi connection that it is unusable. It takes 20min to load apple homepage. When I boot from the clone of my Leopard lying on my external drive, it works perfectly.
I compared the settings between all the tabs of Network-->Airport-->Advanced and they are identical between Snow Leopard and Leopard mode except that SL doesn't have the "Apple Talk" tab.
Appreciate any help to debug this.

5800 xpress music messaging has gone very slow aft...

Dear Friends,
I have recently updated by 5800 xpress music OS and since then the messaging has gone very slow.
it takes lot of time in loading the SMS editor and lot of time in sending a msg.
can some body please give me some solution to improve the speed.

@stripeertw
The brass contact that springs into taper on jack plug is on the vertical surface adjacent to where battery charger 2mm pin is inserted, away from all the other electrical contacts which are situated at either 180°or 90° to it for your information.
Happy to have helped forum with a Support Ratio = 42.5

My machine has gone dead slow. I have to wait for minutes to perform every single function. Like it stopped typing four times during this question.

My machine has gone dead slow. I have to wait for minutes to perform every single function. Like it stopped typing four times during this question.

If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the boot drive, or some other hardware component, is failing. Back up all data immediately, then run the Apple Hardware Test or Apple Diagnostics.
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

Broadband Has Now Gone Slow

Hi, the other day the internet was perfect till around 8pm 8:30pm and since then has gone very slow. the IP profile has dropped, there was work done by BT close by and its since the work up the road the slow down has occured.
I used to be able to download around 600-700kbps now i'm lucky getting 200kbps. the line is syncing at 4MB since but it was 7mb.
I have tried what some on the forum told me to do and still no luck the speed is getting slower and slower yet the connection has been stable.
Could a forum mod take a look i have sent a e-mail and waiting for a reply. just seems wierd that the connection has been stable since going to fast path from interleave but after BT work in the area the speed drops.
Thanks

I have been giving the mods Speed Tests over days now, but i contacted the BT support team on the phone and they have told me something the mods haven't, there is a fault that has registered on their system. This is now being looked at.
See the noise on the Line was 6db down and 9db up since the work that happend in the area it went up to 14.6 dB / 20.0 dB.
So why the mods didn't check this i don't know, nothing against the MODs on here they are great at times but when i have Game Servers that need maps uploading and backups done speed is everything.
Will see what happens in 2 days as i was told it will take upto 48 hours to resolve the issue.

Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...i paid %50.00 for an OLD windows computer with 512 mb of ram and it is much faster..is this normal for mac??

Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...i paid $50.00 for an OLD windows computer with 512 mb of ram and it is much faster..is this normal for mac?? Also, apple says there is nothing they can/wil do even though i got the apple care....i mean really? $50.00 for 2002 computer with windows XP and 512mb of ram and a single core processor......faster and more usable than $1400.00 computer with 4gb of ram and dual core processor.....***???

Willtc92 wrote:
Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...i paid $50.00 for an OLD windows computer with 512 mb of ram and it is much faster..is this normal for mac??
obviously not.
Ive had my 13 inch macbook pro for less than 30 days and the battery health has gone down to 92% and the computer itself is so slow...
Give examples of how it is slow.

My HP Pavilion g6 has suddenly gone slow and the mouse has completely stopped working

My computer has suddenly gone slow and the mouse has completely stopped working. The keyboard works on and off. I ran an HP PC hardware diagnostics UEFI which gave me this result:
smart check: passed
Long DST: Failed
Failure ID: PLQ77T-00074B-MFPWWI-61FF03
Can anyone please help?

The hard drive needs to be replaced. Post back for purchase suggestions and installation instructions.

Gnome won't start: Oh no! Something has gone wrong.

Hello,
after a week holyday i installed all new updates on my Notebook (Asus UX31). During shutdown it freezed and i had to switch off the Notebook. Now if i start i can login with Slim and than gnome starts with an error display: "Oh no! Something has gone wrong. A problem has occured and the system can't recover. All extensions have been disabled as precaution." I can klick on a Log Out Button but if i log in again, the same is happening. It's funny that there appear reminders from evolution and the dialog to unlock the keyring.
Any suggestions?
Here are some logs:
/var/log/Xorg.0.log
[ 16.074]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 16.074] X Protocol Version 11, Revision 0
[ 16.074] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 16.074] Current Operating System: Linux oliver-zen 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 16.074] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cd85b266-a33f-4abf-93d6-7ac918f8ff26 ro quiet add_efi_memmap i915.i915_enable_rc6=1 drm.vblankoffdelay=1 i915.semaphores=1
[ 16.074] Build Date: 01 July 2013 10:48:42AM
[ 16.074]
[ 16.074] Current version of pixman: 0.30.0
[ 16.074] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.074] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.074] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 3 19:37:30 2013
[ 16.075] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.075] (==) No Layout section. Using the first Screen section.
[ 16.075] (==) No screen section available. Using defaults.
[ 16.075] (**) |-->Screen "Default Screen Section" (0)
[ 16.075] (**) | |-->Monitor "<default monitor>"
[ 16.076] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 16.076] (**) | |-->Device "Card0"
[ 16.076] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.076] (==) Automatically adding devices
[ 16.076] (==) Automatically enabling devices
[ 16.076] (==) Automatically adding GPU devices
[ 16.076] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 16.076] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.076] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.076] (II) Loader magic: 0x7fdc20
[ 16.076] (II) Module ABI versions:
[ 16.076] X.Org ANSI C Emulation: 0.4
[ 16.076] X.Org Video Driver: 14.1
[ 16.076] X.Org XInput driver : 19.1
[ 16.076] X.Org Server Extension : 7.0
[ 16.077] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.079] (--) PCI:*(0:0:2:0) 8086:0116:1043:1427 rev 9, Mem @ 0xddc00000/4194304, 0xc0000000/268435456, I/O @ 0x0000e000/64
[ 16.079] Initializing built-in extension Generic Event Extension
[ 16.079] Initializing built-in extension SHAPE
[ 16.079] Initializing built-in extension MIT-SHM
[ 16.079] Initializing built-in extension XInputExtension
[ 16.079] Initializing built-in extension XTEST
[ 16.079] Initializing built-in extension BIG-REQUESTS
[ 16.079] Initializing built-in extension SYNC
[ 16.079] Initializing built-in extension XKEYBOARD
[ 16.079] Initializing built-in extension XC-MISC
[ 16.079] Initializing built-in extension SECURITY
[ 16.079] Initializing built-in extension XINERAMA
[ 16.079] Initializing built-in extension XFIXES
[ 16.079] Initializing built-in extension RENDER
[ 16.079] Initializing built-in extension RANDR
[ 16.079] Initializing built-in extension COMPOSITE
[ 16.079] Initializing built-in extension DAMAGE
[ 16.079] Initializing built-in extension MIT-SCREEN-SAVER
[ 16.079] Initializing built-in extension DOUBLE-BUFFER
[ 16.079] Initializing built-in extension RECORD
[ 16.079] Initializing built-in extension DPMS
[ 16.079] Initializing built-in extension X-Resource
[ 16.079] Initializing built-in extension XVideo
[ 16.079] Initializing built-in extension XVideo-MotionCompensation
[ 16.079] Initializing built-in extension XFree86-VidModeExtension
[ 16.079] Initializing built-in extension XFree86-DGA
[ 16.080] Initializing built-in extension XFree86-DRI
[ 16.080] Initializing built-in extension DRI2
[ 16.080] (II) LoadModule: "glx"
[ 16.080] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.080] (II) Module glx: vendor="X.Org Foundation"
[ 16.081] compiled for 1.14.2, module version = 1.0.0
[ 16.081] ABI class: X.Org Server Extension, version 7.0
[ 16.081] (==) AIGLX enabled
[ 16.081] Loading extension GLX
[ 16.081] (II) LoadModule: "intel"
[ 16.081] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.081] (II) Module intel: vendor="X.Org Foundation"
[ 16.081] compiled for 1.14.2, module version = 2.21.13
[ 16.081] Module class: X.Org Video Driver
[ 16.081] ABI class: X.Org Video Driver, version 14.1
[ 16.082] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 16.084] (++) using VT number 7
[ 16.096] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 16.096] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 16.096] (==) intel(0): RGB weight 888
[ 16.096] (==) intel(0): Default visual is TrueColor
[ 16.096] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2)
[ 16.096] (**) intel(0): Relaxed fencing enabled
[ 16.096] (**) intel(0): Wait on SwapBuffers? enabled
[ 16.096] (**) intel(0): Triple buffering? enabled
[ 16.096] (**) intel(0): Framebuffer tiled
[ 16.096] (**) intel(0): Pixmaps tiled
[ 16.096] (**) intel(0): 3D buffers tiled
[ 16.096] (**) intel(0): SwapBuffers wait enabled
[ 16.096] (==) intel(0): video overlay key set to 0x101fe
[ 16.096] (II) intel(0): Output eDP1 has no monitor section
[ 16.097] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 16.098] (II) intel(0): Output VGA1 has no monitor section
[ 16.098] (II) intel(0): Output HDMI1 has no monitor section
[ 16.099] (II) intel(0): Output DP1 has no monitor section
[ 16.099] (II) intel(0): EDID for output eDP1
[ 16.099] (II) intel(0): Manufacturer: COR Model: 17db Serial#: 0
[ 16.099] (II) intel(0): Year: 2011 Week: 20
[ 16.099] (II) intel(0): EDID Version: 1.4
[ 16.099] (II) intel(0): Digital Display Input
[ 16.099] (II) intel(0): 6 bits per channel
[ 16.099] (II) intel(0): Digital interface is DisplayPort
[ 16.099] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 16.099] (II) intel(0): Gamma: 2.20
[ 16.099] (II) intel(0): No DPMS capabilities specified
[ 16.099] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 16.099] (II) intel(0): First detailed timing is preferred mode
[ 16.099] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 16.099] (II) intel(0): redX: 0.574 redY: 0.341 greenX: 0.352 greenY: 0.564
[ 16.099] (II) intel(0): blueX: 0.162 blueY: 0.118 whiteX: 0.313 whiteY: 0.329
[ 16.099] (II) intel(0): Manufacturer's mask: 0
[ 16.099] (II) intel(0): Supported detailed timing:
[ 16.099] (II) intel(0): clock: 97.8 MHz Image Size: 293 x 164 mm
[ 16.099] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 16.099] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 16.099] (II) intel(0): Supported detailed timing:
[ 16.099] (II) intel(0): clock: 97.8 MHz Image Size: 293 x 164 mm
[ 16.099] (II) intel(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1760 h_border: 0
[ 16.099] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 908 v_blanking: 926 v_border: 0
[ 16.099] (II) intel(0): CPT
[ 16.099] (II) intel(0): Unknown vendor-specific block 0
[ 16.099] (II) intel(0): EDID (in hex):
[ 16.099] (II) intel(0): 00ffffffffffff000df2db1700000000
[ 16.099] (II) intel(0): 14150104951d10780a129593575a9029
[ 16.099] (II) intel(0): 1e505400000001010101010101010101
[ 16.099] (II) intel(0): 010101010101322640a060841a303020
[ 16.099] (II) intel(0): 350025a410000018322640a060841a30
[ 16.099] (II) intel(0): 3020350025a410000018000000fe0043
[ 16.099] (II) intel(0): 50542020202020202020202000000000
[ 16.099] (II) intel(0): 004e4c41413133335541303241200044
[ 16.100] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 16.100] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 16.100] (II) intel(0): Printing probed modes for output eDP1
[ 16.100] (II) intel(0): Modeline "1600x900"x60.0 97.78 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.6 kHz eP)
[ 16.100] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 16.100] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 16.100] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 16.100] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 16.101] (II) intel(0): EDID for output VGA1
[ 16.102] (II) intel(0): EDID for output HDMI1
[ 16.102] (II) intel(0): EDID for output DP1
[ 16.102] (II) intel(0): Output eDP1 connected
[ 16.102] (II) intel(0): Output VGA1 disconnected
[ 16.102] (II) intel(0): Output HDMI1 disconnected
[ 16.102] (II) intel(0): Output DP1 disconnected
[ 16.102] (II) intel(0): Using exact sizes for initial modes
[ 16.102] (II) intel(0): Output eDP1 using initial mode 1600x900
[ 16.102] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 16.102] (II) intel(0): Kernel page flipping support detected, enabling
[ 16.102] (==) intel(0): DPI set to (96, 96)
[ 16.102] (II) Loading sub module "fb"
[ 16.102] (II) LoadModule: "fb"
[ 16.102] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.103] (II) Module fb: vendor="X.Org Foundation"
[ 16.103] compiled for 1.14.2, module version = 1.0.0
[ 16.103] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.103] (II) Loading sub module "dri2"
[ 16.103] (II) LoadModule: "dri2"
[ 16.103] (II) Module "dri2" already built-in
[ 16.103] (==) Depth 24 pixmap format is 32 bpp
[ 16.103] (II) intel(0): [DRI2] Setup complete
[ 16.103] (II) intel(0): [DRI2] DRI driver: i965
[ 16.103] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
[ 16.105] (II) UXA(0): Driver registered support for the following operations:
[ 16.105] (II) solid
[ 16.105] (II) copy
[ 16.105] (II) composite (RENDER acceleration)
[ 16.105] (II) put_image
[ 16.105] (II) get_image
[ 16.105] (==) intel(0): Backing store disabled
[ 16.105] (==) intel(0): Silken mouse enabled
[ 16.105] (II) intel(0): Initializing HW Cursor
[ 16.105] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 16.107] (==) intel(0): DPMS enabled
[ 16.107] (==) intel(0): Intel XvMC decoder enabled
[ 16.107] (II) intel(0): Set up textured video
[ 16.108] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 16.108] (II) intel(0): direct rendering: DRI2 Enabled
[ 16.108] (==) intel(0): hotplug detection: "enabled"
[ 16.130] (--) RandR disabled
[ 16.144] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/i965_dri.so failed (/usr/lib/xorg/modules/dri/i965_dri.so: invalid ELF header)
[ 16.144] (EE) AIGLX: reverting to software rendering
[ 16.144] (II) AIGLX: Screen 0 is not DRI capable
[ 16.174] (II) AIGLX: Loaded and initialized swrast
[ 16.174] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 16.175] (II) intel(0): Setting screen physical size to 423 x 238
[ 16.402] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 16.402] (**) Video Bus: Applying InputClass "system-keyboard"
[ 16.402] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.402] (**) Video Bus: Applying InputClass "keyboard"
[ 16.402] (II) LoadModule: "evdev"
[ 16.403] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.403] (II) Module evdev: vendor="X.Org Foundation"
[ 16.403] compiled for 1.14.2, module version = 2.8.1
[ 16.403] Module class: X.Org XInput Driver
[ 16.403] ABI class: X.Org XInput driver, version 19.1
[ 16.403] (II) Using input driver 'evdev' for 'Video Bus'
[ 16.403] (**) Video Bus: always reports core events
[ 16.403] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 16.403] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 16.403] (--) evdev: Video Bus: Found keys
[ 16.403] (II) evdev: Video Bus: Configuring as keyboard
[ 16.403] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11"
[ 16.403] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[ 16.403] (**) Option "xkb_rules" "evdev"
[ 16.404] (**) Option "xkb_model" "pc104"
[ 16.404] (**) Option "xkb_layout" "de"
[ 16.464] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 16.464] (**) Power Button: Applying InputClass "system-keyboard"
[ 16.464] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.464] (**) Power Button: Applying InputClass "keyboard"
[ 16.464] (II) Using input driver 'evdev' for 'Power Button'
[ 16.464] (**) Power Button: always reports core events
[ 16.464] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 16.464] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.464] (--) evdev: Power Button: Found keys
[ 16.464] (II) evdev: Power Button: Configuring as keyboard
[ 16.464] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 16.464] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.464] (**) Option "xkb_rules" "evdev"
[ 16.464] (**) Option "xkb_model" "pc104"
[ 16.464] (**) Option "xkb_layout" "de"
[ 16.466] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 16.466] (II) No input driver specified, ignoring this device.
[ 16.466] (II) This device may have been added with another device file.
[ 16.466] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 16.466] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 16.466] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.466] (**) Sleep Button: Applying InputClass "keyboard"
[ 16.466] (II) Using input driver 'evdev' for 'Sleep Button'
[ 16.466] (**) Sleep Button: always reports core events
[ 16.466] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 16.466] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 16.466] (--) evdev: Sleep Button: Found keys
[ 16.466] (II) evdev: Sleep Button: Configuring as keyboard
[ 16.467] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
[ 16.467] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 16.467] (**) Option "xkb_rules" "evdev"
[ 16.467] (**) Option "xkb_model" "pc104"
[ 16.467] (**) Option "xkb_layout" "de"
[ 16.467] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 16.468] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 16.468] (II) No input driver specified, ignoring this device.
[ 16.468] (II) This device may have been added with another device file.
[ 16.469] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event6)
[ 16.469] (II) No input driver specified, ignoring this device.
[ 16.469] (II) This device may have been added with another device file.
[ 16.469] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 16.469] (II) No input driver specified, ignoring this device.
[ 16.469] (II) This device may have been added with another device file.
[ 16.470] (II) config/udev: Adding input device USB2.0 VGA Webcam (/dev/input/event9)
[ 16.470] (**) USB2.0 VGA Webcam: Applying InputClass "system-keyboard"
[ 16.470] (**) USB2.0 VGA Webcam: Applying InputClass "evdev keyboard catchall"
[ 16.470] (**) USB2.0 VGA Webcam: Applying InputClass "keyboard"
[ 16.470] (II) Using input driver 'evdev' for 'USB2.0 VGA Webcam'
[ 16.470] (**) USB2.0 VGA Webcam: always reports core events
[ 16.470] (**) evdev: USB2.0 VGA Webcam: Device: "/dev/input/event9"
[ 16.470] (--) evdev: USB2.0 VGA Webcam: Vendor 0x13d3 Product 0x5719
[ 16.470] (--) evdev: USB2.0 VGA Webcam: Found keys
[ 16.470] (II) evdev: USB2.0 VGA Webcam: Configuring as keyboard
[ 16.470] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input9/event9"
[ 16.470] (II) XINPUT: Adding extended input device "USB2.0 VGA Webcam" (type: KEYBOARD, id 9)
[ 16.470] (**) Option "xkb_rules" "evdev"
[ 16.470] (**) Option "xkb_model" "pc104"
[ 16.470] (**) Option "xkb_layout" "de"
[ 16.471] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 16.472] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 16.472] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 16.472] (**) Asus WMI hotkeys: Applying InputClass "keyboard"
[ 16.472] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 16.472] (**) Asus WMI hotkeys: always reports core events
[ 16.472] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 16.472] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 16.472] (--) evdev: Asus WMI hotkeys: Found keys
[ 16.472] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 16.472] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input8/event8"
[ 16.472] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 10)
[ 16.472] (**) Option "xkb_rules" "evdev"
[ 16.472] (**) Option "xkb_model" "pc104"
[ 16.472] (**) Option "xkb_layout" "de"
[ 16.473] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 16.473] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 16.473] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.473] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 16.473] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.473] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.473] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 16.473] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.473] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.473] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.473] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 16.473] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 16.474] (**) Option "xkb_rules" "evdev"
[ 16.474] (**) Option "xkb_model" "pc104"
[ 16.474] (**) Option "xkb_layout" "de"
[ 16.475] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event10)
[ 16.475] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 16.475] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[ 16.475] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[ 16.475] (II) LoadModule: "synaptics"
[ 16.475] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 16.475] (II) Module synaptics: vendor="X.Org Foundation"
[ 16.475] compiled for 1.14.1, module version = 1.7.1
[ 16.475] Module class: X.Org XInput Driver
[ 16.475] ABI class: X.Org XInput driver, version 19.1
[ 16.475] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 16.475] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 16.475] (**) Option "Device" "/dev/input/event10"
[ 16.596] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 32)
[ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 32)
[ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 16.597] (**) Option "TapButton1" "1"
[ 16.597] (**) Option "TapButton2" "2"
[ 16.597] (**) Option "TapButton3" "3"
[ 16.597] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 16.597] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 16.597] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 16.631] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input10/event10"
[ 16.631] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 16.631] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 16.631] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 16.631] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[ 16.632] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 16.632] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 16.632] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 16.632] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 16.632] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 16.633] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 16.633] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 16.633] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 16.633] (II) No input driver specified, ignoring this device.
[ 16.633] (II) This device may have been added with another device file.
[ 30.465] (II) UnloadModule: "synaptics"
[ 30.465] (II) evdev: AT Translated Set 2 keyboard: Close
[ 30.465] (II) UnloadModule: "evdev"
[ 30.465] (II) evdev: Asus WMI hotkeys: Close
[ 30.465] (II) UnloadModule: "evdev"
[ 30.465] (II) evdev: USB2.0 VGA Webcam: Close
[ 30.465] (II) UnloadModule: "evdev"
[ 30.465] (II) evdev: Sleep Button: Close
[ 30.465] (II) UnloadModule: "evdev"
[ 30.465] (II) evdev: Power Button: Close
[ 30.465] (II) UnloadModule: "evdev"
[ 30.465] (II) evdev: Video Bus: Close
[ 30.466] (II) UnloadModule: "evdev"
[ 30.480] (EE) Server terminated successfully (0). Closing log file.
~/.xsession-errors
Tracker-Message: Setting up monitor for changes to config file:'/home/oliver/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/home/oliver/.config/tracker/tracker-store.cfg'
gnome-session[1818]: WARNING: Failed to start app: Unable to start application: Kindprozess »dropboxd« konnte nicht ausgeführt werden (Datei oder Verzeichnis nicht gefunden)
Tracker-Message: Setting up monitor for changes to config file:'/home/oliver/.config/tracker/tracker-miner-fs.cfg'
** Message: applet now removed from the notification area
** Message: using fallback from indicator to GtkStatusIcon
(tracker-miner-fs:1925): Tracker-WARNING **: Invalid desktop file: 'file:///usr/share/desktop-directories/X-Unity-All-Applications.directory'
(tracker-miner-fs:1925): Tracker-WARNING **: Couldn't get name, missing key (Name)
JS ERROR: !!! WARNING: 'anonymous function does not always return a value'
JS ERROR: !!! WARNING: file '/home/oliver/.local/share/gnome-shell/extensions/[email protected]/extension.js' line 597 exception 0 number 157
JS ERROR: !!! WARNING: 'anonymous function does not always return a value'
JS ERROR: !!! WARNING: file '/home/oliver/.local/share/gnome-shell/extensions/[email protected]/extension.js' line 1012 exception 0 number 157
(gnome-shell:1897): Clutter-CRITICAL **: clutter_actor_insert_child_at_index: assertion `child->priv->parent == NULL' failed
** Message: applet now embedded in the notification area
Fensterverwalter-Warnung:CurrentTime used to choose focus window; focus window may not be correct.
Fensterverwalter-Warnung:Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
(gnome-shell:1897): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
Individuals will not be linked properly and creating new links between Personas will not work.
The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
gnome-session[1818]: WARNING: Could not launch application 'gdu-notification-daemon.desktop': Unable to start application: Kindprozess »/usr/lib/gnome-disk-utility/gdu-notification-daemon« konnte nicht ausgeführt werden (Datei oder Verzeichnis nicht gefunden)
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Bilder/Bildschirmfoto%20von%20%C2%BB2013-06-18%2022:43:01%C2%AB.png" was not found, exec: gnome-settings-daemon, mime_type: image/png
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/yi.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/Mabu.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/Sommerlager.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/MabuChongquan.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/basketball/klein/Basketball1.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/basketball/klein/Basketball2.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
(gnome-settings-daemon:1878): GLib-CRITICAL **: g_variant_get_int32: assertion `g_variant_is_of_type (value, G_VARIANT_TYPE_INT32)' failed
** (update-notifier:2110): WARNING **: log file empty (logrotate?) /var/log/dpkg.log
** (update-notifier:2110): WARNING **: log file empty (logrotate?) /var/log/apt/term.log
WARNING:root:timeout reached, exiting
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Bilder/Bildschirmfoto%20von%20%C2%BB2013-06-18%2022:43:01%C2%AB.png" was not found, exec: gnome-settings-daemon, mime_type: image/png
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/yi.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/Mabu.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/Sommerlager.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/Kung%20Fu/MabuChongquan.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/basketball/klein/Basketball1.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
** (zeitgeist-datahub:2032): WARNING **: recent-manager-provider.vala:133: Desktop file for "file:///home/oliver/Tempel%20Steyr/Kindersportmesse/Fotos/basketball/klein/Basketball2.jpg" was not found, exec: plugin-container, mime_type: image/jpeg
Fensterverwalter-Warnung:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2600003 (Rhythmbox)
Fensterverwalter-Warnung:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
Fensterverwalter-Warnung:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2600003 (Rhythmbox)
Fensterverwalter-Warnung:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
Fensterverwalter-Warnung:Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x2600003 (Rhythmbox)
Fensterverwalter-Warnung:meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.
(gnome-settings-daemon:1878): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-settings-daemon:1878): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(nm-applet:1933): Gdk-WARNING **: nm-applet: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
(update-notifier:2110): Gdk-WARNING **: update-notifier: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
(evolution-alarm-notify:2061): Gdk-WARNING **: evolution-alarm-notify: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
(gnome-screensaver:2031): Gdk-WARNING **: gnome-screensaver: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
Fensterverwalter-Warnung:Log level 16: gnome-shell: Fatal IO error 0 (Erfolg) on X server :0.
(gnome-shell-calendar-server:1967): Gdk-WARNING **: gnome-shell-calendar-server: Fatal IO error 11 (Die Ressource ist zur Zeit nicht verfügbar) on X server :0.
** (zeitgeist-datahub:2032): WARNING **: zeitgeist-datahub.vala:227: Unable to get name "org.gnome.zeitgeist.datahub" on the bus!
(tracker-miner-fs:1925): Tracker-CRITICAL **: Could not execute sparql: Verbindung ist geschlossen
(tracker-miner-fs:1925): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Verbindung ist geschlossen
(tracker-miner-fs:1925): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Verbindung ist geschlossen
(tracker-miner-fs:1925): GLib-GIO-CRITICAL **: Error while sending AddMatch() message: Verbindung ist geschlossen
XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0"
after 1788 requests (1788 known processed) with 0 events remaining.

Meanwhile i found out that tracker could be the source of this problem. If not, tracker has a problem. first i tried to reinstall tracker, output was a lot of lines with:
tracker: /usr/share/ tracker-concerning-files exist in filesystem
then i deinstalled it. now when i want to install it, a similar output like obove comes.
Last edited by meson11 (2013-08-05 16:29:52)

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was hot at charging time.

I downloaded IOS6 earlier today and my 4S has died twice, it has gone from 45 to 32% in the last 5 minutes and i have icloud, internet, all apps closed with nothing running at all!! There is a serious problem with ios6, my phone was working hot at chargering time. Apple need to address this asap!!!!

Hi Suzy Q,
I can send and receive calls.
I get "messaging stopped" when doing a lot of texts.
Texts come up "ghosted" meaning they have the text on the bottom and a transparent one overlaid on top. they then become one. But I get the ghosting most of the time when I go into a message from a contact to send a text.
When I go to call logs or text logs, the numbers come up first, and then then the names pop up randomly, meaning not in order down the page, until they are all shown. lots of lag time.
It runs slow.
I have 5 apps on here. I should be able to have a lot of apps on here, and play music, and have files, and...and....and.
I can get online but doing a Google search, when the page with the choices comes up, it is blurred and I have to tap on the screen for it to become clear and readable.
When online and scrolling, it hitches sometimes/lags/gets stuck then unstuck
I get VZWAVS has stopped. (not sure if those are the right letters)
The status bar that is supposed to be gray with the new update, goes back and forth between green--the old os--to gray. And I have found no continuity with when I get green or when I get gray.
I get a black screen on occasion.
sometimes the proximity sensor doesn't work.
sometimes when I have my bluetooth on and have "hands free mode" on, I get the a text message read through the headset and also through the handset.
I soft reboot often--turn it off wait a bit and

Bluetooth pane has gone missing since update from 10.10.2 to 10.10.3 on iMac mid 2007

I have a iMac mid 2007 model. I was running os x 10.10.2 with no problems. I update to os x 10.10.3 for the security issue. Now my bluetooth pane has gone missing from system preferences. I have tried everything suggested in suggested in support as it seems others have suffered the same thing on different macs. Nothing has that was suggested there has corrected this issue. Does anyone have any ideas apart from using a wired mouse and keyboard or using time machine to revert to os x 10.10.2? Let me know please.
Also booting up is slow to say the least, I can live with that though unless there is an as yet unknown by me fix.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Evolution 2.12.1-1 has gone slow

Similar Messages

Maybe you are looking for