Evolution imap not working?

Hi,
Archlinux gets updated every two or three days on my laptop. Since 27 april 2011 I didn't use evolution, so I guess I have updated the system a few times. Yesterday I was not able to check my imap-mail from evolution - also sending an email through SMTP did not succeed. Checking it with thunderbird went perfectly, as well as sending that email through SMTP.
Anyone else having the same problem? In what logfile does evolution/gnome output its errors, so I can submit a bugreport...

Further to my earlier post today. Deleting my BT a/c in mac mail yesterday and adding back as new A/C did not work and both my A/c and my wife's continued to time out. I finally went into the a/c settings once more, deleted my password and re-entered it and saved the change. Surprise surprise, this re-established imap contact and downloaded all my folder contents once more. Not only that, it restarted my wife's e-mail in her logiin without the need to delete and re-enter her separate E-mail password. My password is the master for using BT Broadband and somewhere this had got lost/ corrupted in requesting imap mail to our iMac. I hope this is a permanent solution and hope this helps others whose imap service fails.

Similar Messages

Google IMAP not working in OUTLOOK 2013

Hi,
One of my client using Original MS OFFICE 2013 in genuine window.
but when he is trying to connect his gmail id in Outlook 2013.. its not working. showing lots of error. tried everything. please solve the issue or give me the solution how can i done it properly
he want to use google mail in Outlook
Thanks
neeraj Sharma
website designer
[Deleted personal information]

Hi,
Is the user using Gmail?
First, we need to confirm the account status is healthy, let the user logon Webmail to send and receive emails to check if there is any error.
Then, make sure the IMAP settings are correct as below:
Incoming Mail (IMAP) Server - Requires SSL
imap.gmail.com
Port: 993
Requires SSL:Yes
Outgoing Mail (SMTP) Server - Requires TLS
smtp.gmail.com
Port: 465 or 587
Requires SSL: Yes
Requires authentication: Yes
Use same settings as incoming mail server
Full Name or Display Name: [your name]
Account Name or User Name: your full Gmail address ([email protected]). Google Apps users, please enter username@your_domain.com
Email address: your full Gmail address ([email protected]) Google Apps users, please enter username@your_domain.com
Password: your Gmail password
Another possible cause is that the data file of this account has corrupted, I suggest you run Scanpst.exe to repair the data file(.ost) and check the result.
The default location of Scanpst.exe should be:
32-bit Windows
C:\Program Files\Microsoft Office\Office15
64-bit Windows
C:\Program Files (x86)\Microsoft Office\Office15
64-bit Outlook
C:\Program Files\Microsoft Office\Office15
Click-to-Run
C:\Program Files\Microsoft Office 15\root\office15
The data file location can be found in Outlook: File -> Account Settings -> Account Settings -> Data Files tab.
If the problem persists, I want to know what the error messages are. To protect the user's privacy, please send it to our email address:
[email protected]
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Imap not working (sky mail)

Hi,
I am having issues with my mail on my iPhone 4 iOS 4.3.3
I use IMAP from sky, and I have checked all the settings multiple times with the sky support, however I keep getting the following error
Cannot Get Mail
The mail server 'imap.tools.sky.com' is not responding. Verify that you have entered the correct account info in mail settings.
These details are correct, as I have not changed them. This just stopped working, I did not do an upgrade.
I have deleted and readded my account multiple times, and also been working with sky to get this issue sorted, however there is not a problem there end, so I must be doing something wrong, or my phone is not working properly.
Does anyone have anything additional that I can do?
Kind Regards
Colin

Further to my earlier post today. Deleting my BT a/c in mac mail yesterday and adding back as new A/C did not work and both my A/c and my wife's continued to time out. I finally went into the a/c settings once more, deleted my password and re-entered it and saved the change. Surprise surprise, this re-established imap contact and downloaded all my folder contents once more. Not only that, it restarted my wife's e-mail in her logiin without the need to delete and re-enter her separate E-mail password. My password is the master for using BT Broadband and somewhere this had got lost/ corrupted in requesting imap mail to our iMac. I hope this is a permanent solution and hope this helps others whose imap service fails.

Hotmail in IMAP not working

Hello everyone,
I added a hotmail.com email address in IMAP (formerly configured POP3 and it worked very well).
The automatic assistance has filled Incoming server (IMAP-mail.outlook.com) and outgoing (smtp-mail.outlook.com). I added the password in both cases.
I have the "sent messages" correctly imported,
I can send emails from this address,
but I have no message pushed in my inbox even after synchronizing the account.
In connection doctor, everything is in green and I have no error message ..
The problem seems to be in the incoming server but I can't find what's going wrong...
Someone has already encountered this problem?
I already tried to delete and add the account back but the problem persists.
Thanks for your help!

How to set up Outlook.com with IMAP
Outlook.com or Hotmail.com IMAP setup
Getting Hotmail IMAP to Work on a Mac

IMAP not working in IOS 8.1.1

IMAP email retrieval has stopped working with this release of IOS..
It claims to be connecting, doesn't show an error. but no new email shows up...
IOS 8.1.1, iPhone 5, no other configuration changes.
POP works, IMAP doesn't.
--marcel

Hello,
ive just come from a client that seems to have the same issue.
We tested his ipad, iPhone and my iPhone all on 8.1.1. No new email snice 21/11/2014 via IMAP on ISP based email. Called ISP they said they have not seen many calls like this.
No error messagez
can send emails
can delete emails, and they move to IMAP trash on all 3 devices.
His MacMail works, though has been a little erratic sinice Yosimite.

IMAP not working after 10.2 OS release

I have 3 email accounts on my Q10 all with different providers set up using IMAP and SMTP. Everything worked fine through OS 10 and 10.1. It stopped worked yesterday when I installed 10.2 yesterday. I can now no longer receive emails, but I can still send. If I change the settings to SMTP then I can receive but I can't sync with Outlook.
I have deletid the account and tried to add it, but it will only work with SMTP with SSL turned off.
Has anyone else had this problem or know how to fix this

Hi,
After several lengthly conversations with T-Mobile (UK) who couldn't duplicate the problem - I gave them access to a test email address and it worked fine for them - I have managed to get them to send the phone off for repair. They tried to pass the buck to Blackberry, but after pointing out that my contract was with them, the phone was supplied by them and the upgrade was from their servers, they agreed to take responsibilty. I'm not sure if you 'Sales of Goods Act' and 'Fit for Purpose' law in U.S. but you must have something similar.
To be fair to T-Mobile, once I got past their first line of defence and through to their technical department they were extremely helpful.
Unforunately, If the phone comes back fixed I won't know what the problem was to advise you, and if they can't fix it, I'll be getting a new one.
If I do find out, I will let you know. 2-4 weeks wait time though!

IMAP not working after installing GWAVA

BM 3.8; NW 6.5; GW 6.5. Just set up a GWAVA 4.5 SMTP scanner inside
BorderManager and before GWIA (BM now NATs the A record public IP
address to the internal GWAVA address, rather than to the internal GWIA
address). I assume as a consequence of the public IP address now
pointing to the GWAVA box and not directly to GWIA, IMAP now doesn't
work b/c it cannot connect to the GWIA ("mail.domain.com is not an IMAP
4 server"), although the IMAP to gmail still works. In another forum it
was suggested that using BM port forwarding is a possible work around:
http://forums.novell.com/novell-prod...orwarding.html
However, this link describes the BM port forwarding workaround where
there was only one public IP address, whereas i have several, and most
importantly one dedicated to my mail. I assume that the relevance of
the TID is to the public IP dedicated to my A record which now points to
GWAVA, and no longer to GWIA? That is the public IP can again be NATted
to GWIA so that IMAP works, yet the port 25 inbound mail can at the same
time be port forwarded to the GWAVA internal address? Finally, how, if
at all, does this relate to the filter exceptions in place opening port
25 to inbound mail to GWAVA?

This has been a common scenario over the years. A mail filtering
device gets instituted, and non-smtp traffic breaks. In a situation
where mail was being static NAT'd, you have to find a way to split the
traffic to two different devices. You have a couple of choices:
1. Two static NAT's. If you have two public IP addresses you can use,
one gets static NAT'd to the mail filtering device and the other to the
mail server. Filter exceptions need to be changed, and public DNS
records may need to be changed (if using URL's to access non-smtp
stuff).
2. Proxy. Convert the static nat to proxy, and redirect the desired
ports to different internal addresses. DNS doesn't have to be changed,
but filter exceptions do, and access rules need to be added/changed.
You also may not be able to use port 110, unless you use mail proxy
(which has some issues).
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Gmail - Mail IMAP not working very well

Hey all, I'm having some trouble with moving from POP to IMAP on my mac. I just set it up and it works fine except for receiving mail and syncing up with gmail online but for some reason I am unable to send emails straight from Mail. It seems that Mail can't connect with the Outgoing Mail Server (SMTP). It 's set to send to "smtp.gmail.com" as per the instructions at http://mail.google.com/support/bin/answer.py?answer=81379. In the preferences pane that seems to translate to smtp.gmail.com:(my email address).
Anyone have any ideas? Thanks for reading!

What are your settings for the Incoming and Outgoing ports; do they match exactly what Gmail advises in their Help page for Mail? If not, it won't work.
Mulder

Go daddy imap not working for inbox- I have checked ports, help anyone?

Go Daddy and Apple Mail Inbox are not syncing my imap account. Emails appear on server so problem is on Apple end. Outbox is fine. I have checked ports and tried both with SSL and without. Any suggestions?

Same thing happened to me. Looks like the upgrade turns on Location Restriction. To re-enable location:
1) Go to Settings
2) Select "General"
3) Go to "Restrictions"
4) Either Disable Restrictions, or set "Allow/Locations" to "ON".
Location should be re-enabled.

Mail 4.1 + Gmail IMAP not working anymore

Hello all,
All of a sudden I cannot recieve emails via IMAP gmail anymore. It was working fine till, a few days back when Mail stopped fetching new emails. The gears just keep spilling.
I can send emails via SMTP gmail.
The connectivity doctor shows that everything is ok for IMAP and SMTP.
Googling shows me a lot of people are facing this problem of late.
Anyone here know whats going on?

My Gmail IMAP Account has also stopped working. It continually searches for mail, and if I try to access any of my mail then the Mail program crashes. My wife's Gmail IMAP program is working fine. I have tried setting up another account, and it just keeps searching. Entourage works fine.
How did you remove the account??

10.5.2 MAIL not working ... A rotten Apple ! Any suitable alternatives ?

POP or IMAP not working since upgrading from Tiger. All I get is "Could not connect to this POP Server ..." or "could not connect to this SMTP Server" yet can Telnet Server on port 25 or 110. Checked and re-checked settings/Server/Ports. Tried nearly everything suggested in the forum to no avail.
Any suitable alternatives besides Thunderbird ?
Will Apple ever fix Mail ?

No problems here after upgrading and running my gmail through mail as pop.
well, ok I have no new mail alert sound playing, but that's a different story grrrrr

IMAP Sync not working (unread marks)

We have a number of users that are set up with GMail as a personal email address on their blackberry. If you read an email on the blackberry or delete an email on the blackberry it will sync that to GMail and the message will be read or deleted. If you delete from GMail it will eventually get ride of it from the blackberry.
We are still having two big issues though. If they read an email (through GMail) before it gets to the blackberry then it never gets on to the blackberry. Also, if you read an email in GMail it never marks it as read on the Blackberry.
We are in the process of switching from Lotus Notes to Google Apps so this is causing a lot of problems. I know there is a google app for reading the emails, but that will not work if you don't have a data connection.
Thank you for you help.
John Miller

You would know better than I exactly what you are looking for, I have been searching the Knowledgebase
using variations of "Unable to sync email messages imap" and I think we are pretty close to your problem.
I just lack the expertise. Go up to support and try some searches.
It's worth a try!
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Alternate imap ports not working?

I use fastmail as my email provider who has an option to access their servers thru a special proxy, meaning I can access my email from within my work firewall. The settings work ok with the ibismail iphone app (with settings below), but (using the same settings) not with the iphone mail app. It's not just the work firewall, the mail settings don't work over 3g as well, so it must be the settings not the firewall. Has anyone tried to get their iphone working with an alternate port?
Host Name: imaps-proxy.messagingengine.com
Authentication = password, Use SSL=Yes, server port = 80

It looks like:
iPhone (3GS, OS 3.1.3) Mail with IMAP on:
port 143 (unencrypted): works
port 993 (ssl): works
any other port (unencrypted): works
any other port (ssl): DOES NOT WORK!
Moreover it doesn't matter wether the certificate for SSL is self-signed or a "valid" commercial one.
It also is no firewall issue on the server side.
This is really bad as I don't want to open standard IMAP-SSL port on my server but instead use some port > 10000
It also does not work with iPad (OS 3.2) Mail

Imap and Pop not working on 2013 servers - BAD Command received in Invalid state

Hello,
We recently moved our frontend server over to Exchange 2013. So now both internally and externally all mail traffic will flow through the new servre. After battling issue after issue I was able to get the new exchange environment working as it should. The
only problem is that IMAP and POP3 logins do not work for 2013 mailboxes. It works fine for 2010 but not 2013. Here are the results from the testconnectivity website:
The IMAP service is being tested.
There was an error testing the IMAP service
Additional Details
Secured: CN=mail.domain.com, OU=Unified Communications, O=Companhy, POBox=United States, S...
S: * OK The Microsoft Exchange IMAP4 service is ready.
C: 1 CAPABILITY
S: * CAPABILITY IMAP4 IMAP4rev1 AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
1 OK CAPABILITY completed.
C: 2 LOGIN user <password>
S: 2 NO LOGIN failed.
C: 3 LIST "" *
S: 3 BAD Command received in Invalid state.
Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.MailProtocolException: 3 BAD Command received in Invalid state.
at Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.ImapProtocolTester.SendCommand(String command, String logString)
at Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.BaseProtocolTest.PerformTestReally()
Elapsed Time: 1829 ms.
Here are my Get-ImapSettings from the mailbox server
RunspaceId : 1c5069f4-520f-4f62-88d6-affd0e0796d7
ProtocolName : IMAP4
Name : 1
MaxCommandSize : 10240
ShowHiddenFoldersEnabled : False
UnencryptedOrTLSBindings : {[::]:143, 0.0.0.0:143}
SSLBindings : {[::]:993, 0.0.0.0:993}
InternalConnectionSettings : {MAIL4.domain.com:993:SSL, MAIL4.domain.com:143:TLS}
ExternalConnectionSettings : {}
X509CertificateName : mail.domain.com
Banner : The Microsoft Exchange IMAP4 service is ready.
LoginType : SecureLogin
AuthenticatedConnectionTimeout : 00:30:00
PreAuthenticatedConnectionTimeout : 00:01:00
MaxConnections : 2147483647
MaxConnectionFromSingleIP : 2147483647
MaxConnectionsPerUser : 16
MessageRetrievalMimeFormat : BestBodyFormat
ProxyTargetPort : 143
CalendarItemRetrievalOption : iCalendar
OwaServerUrl :
EnableExactRFC822Size : False
LiveIdBasicAuthReplacement : False
SuppressReadReceipt : False
ProtocolLogEnabled : True
EnforceCertificateErrors : False
LogFileLocation : C:\Program Files\Microsoft\Exchange Server\V15\Logging\Imap4
LogFileRollOverSettings : Daily
LogPerFileSizeQuota : 0 B (0 bytes)
ExtendedProtectionPolicy : None
EnableGSSAPIAndNTLMAuth : True
Server : MAIL4
AdminDisplayName :
ExchangeVersion : 0.10 (14.0.100.0)
DistinguishedName : CN=1,CN=IMAP4,CN=Protocols,CN=MAIL4,CN=Servers,CN=Exchange Administrative Group
(FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Company,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=willowcreek,DC=org
Identity : MAIL4\1
Guid : 593e53d7-64e5-4170-b897-47b1af944a5b
ObjectCategory : domain.com/Configuration/Schema/ms-Exch-Protocol-Cfg-IMAP-Server
ObjectClass : {top, protocolCfg, protocolCfgIMAP, protocolCfgIMAPServer}
WhenChanged : 2/4/2015 8:45:39 AM
WhenCreated : 1/22/2015 1:48:43 PM
WhenChangedUTC : 2/4/2015 2:45:39 PM
WhenCreatedUTC : 1/22/2015 7:48:43 PM
OrganizationId :
OriginatingServer : NS6.domain.com
IsValid : True
ObjectState : Unchanged
The IMAP service is being tested.
There was an error testing the IMAP service
Additional Details
Secured: CN=mail.willowcreek.org, OU=Unified Communications, O=Willow Creek Community Church, POBox=United States, STREET=67 E Algonquin Road, L=South Barrington, S=IL, PostalCode=60010, C=US
S: * OK The Microsoft Exchange IMAP4 service is ready.
C: 1 CAPABILITY
S: * CAPABILITY IMAP4 IMAP4rev1 AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
1 OK CAPABILITY completed.
C: 2 LOGIN ssimpson <password>
S: 2 NO LOGIN failed.
C: 3 LIST "" *
S: 3 BAD Command received in Invalid state.
Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.MailProtocolException: 3 BAD Command received in Invalid state.
at Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.ImapProtocolTester.SendCommand(String command, String logString)
at Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.BaseProtocolTest.PerformTestReally()
Elapsed Time: 1829 ms.
The IMAP service is being tested.
There was an error testing the IMAP service
Additional Details
Secured: CN=mail.willowcreek.org, OU=Unified Communications, O=Willow Creek Community Church, POBox=United States, STREET=67 E Algonquin Road, L=South Barrington, S=IL, PostalCode=60010, C=US
S: * OK The Microsoft Exchange IMAP4 service is ready.
C: 1 CAPABILITY
S: * CAPABILITY IMAP4 IMAP4rev1 AUTH=PLAIN UIDPLUS CHILDREN IDLE NAMESPACE LITERAL+
1 OK CAPABILITY completed.
C: 2 LOGIN ssimpson <password>
S: 2 NO LOGIN failed.
C: 3 LIST "" *
S: 3 BAD Command received in Invalid state.
Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.MailProtocolException: 3 BAD Command received in Invalid state.
at Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.ImapProtocolTester.SendCommand(String command, String logString)
at Microsoft.Exchange.Tools.ExRca.Tests.ImapPop.BaseProtocolTest.PerformTestReally()
Elapsed Time: 1829 ms.

When you do the telnet test make sure you enter in the command like below verbatim. Right before you type login you need to add some preceding character in my case the > sign.
* OK The Microsoft Exchange IMAP4 service is ready.
> login jchong password (make sure you type a preceding character first like the > sign)
> OK LOGIN completed.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

Evolution imap not working?

Similar Messages

Maybe you are looking for