EVP88 - When starting song from beginning, Tremolo Intensity resets to 0 ?!

EVP88 - When starting a song from beginning, Tremolo Intensity resets to 0 ?!
Why does this happen? I can't figure it out and its really annoying. Please someone say it happens to them too.
-Jeff

Thanks for the reply,
I should have said what I already tried.
I have moved the instrument to a fresh track
I have removed all regions
I have "removed all automation off current track"
It still does this, so I had to automate the paramter to on, and it even resets itself when a new regions comes along the SPL.
There must be something causing this. I know it responds to midi, but with no regions/automation, what is up?

Similar Messages

How can I show album art in the mini player when playing songs from a plugged in iPhone?

How can I show album art in the mini player when playing songs from a plugged in iPhone?
When I play from my phone and switch to the mini player it's always showing the music notes in the thumbnaill. It'd be nice if it could get album art off of the phone.
I'm on iTunes version 11.0.4.4

He @mracole,
it is very nice that you post a solution to complete the library with artwork for album's that do not have an artwork. Your solution perfectly addresses the problem for assigning artwork, BUT this thread is about CHANGING artwork for albums already uploaded into iTunes Match. Just try to replace for example a blue artwork cover for an album with a red one. If you made it in a simple way (without deleting the album from iTunes Match and local changes on the files with an external ID3-Application or 2 or more iTunes libraries on different Mac's) this is the right place to give a solution. I really tried for hours to change the artwork to make them visible in landscape cover flow mode on my iPhone5. In rare cases I made it, but then the covers sometimes where restored to the old onces - exacly how it is mentioned by Starhawk
As long as there is no simple way to change the cover of an iTunes Match stored album (you can change title, artist and so on without hitting "update iTunes Match" over all distributed Library on different devices - this date will be synchronized almost instantly) I considered the behaviour from iTunes as BUGGY! For me the local artwork cache (and if there is any iCloud artwork cache - I don't know) do not interfere with iCloud. Even when I delete the whole local cache (album artwork music - everything) I do not manage to change the artwork.
Regards from Munich, Germany

! Error when copying song from Purchased to IPod play list. How to fix?

! Error when copying song from Purchased to IPod play list. How to fix?

Hi
Try the iPod for windows forum http://discussions.apple.com/forum.jspa?forumID=826
Tony

When transferring songs from iTunes to phone it was doing it ok then all of a sudden it started to say iTunes cannot pick up information from phone restore to factory settings I am afraid if I do this I will loose all phone numbers pictures and songs anyo

When transferring music from iTunes to iPhone after about 3 downloads a message come up saying iTunes cannot get information from phone and I should restore phone to factory settings I do not wont to do this because I am worried I will loose all phone contacts ,pictures,and songs anyone know how I can resolve this

Not a good idea to depend on an iPhone or any cell phone alone for such important data, which can be lost or stolen or damaged beyond repair.
Contacts are designed to be synced with a supported address book app on your computer and/or there are a number of free email accounts that support syncing contacts and other data over the air such as with an Apple iCloud account, Gmail, Yahoo, and Hotmail.
Photos/videos in the iPhone's Camera Roll can and should be imported by your computer as with any other digital camera.
In addition, contacts and photos/videos in the iPhone's Camera Roll are included with the iPhone's backup.

Starting Songs From The Middle Of The Song

Sometimes when listening to iTunes or my iPod, I skip a song while it is in the middle of the song. Why is it that this information is then saved so that when that song is selected next, it continues from the exact point that I skipped ahead at the last time I listened to it?
Is there a setting so that all songs will automatically start from the beginning no matter what when they are selected?

Ya, go to the song in iTunes, select it, do a Get Info and then under Options there is a check box for Remember Playback position. You will likely find this checked. Uncheck it and you should be all set.
You can select multiple songs at the same time, go a Get Info, then at the bottom there is a pull down for turning this ON/OFF for the whole groups of songs. So you could select your whole library if you wanted, Get Info and then turn it off for all of them to be sure.
Patrick

NoSuchMethod error when starting WebStart from command line (Linux)

I'm using Chainsaw via WebStart http://logging.apache.org/log4j/docs/webstart/chainsaw/chainsawWebStart.jnlpWhen I enter this link into my browser, it launches WebStart and Chainsaw starts fine (after I approve the certificate).
When I try to run it from the command line/home/JavaLibs/jdk1.5.0_02/jre/javaws/javaws http://logging.apache.org/log4j/docs/webstart/chainsaw/chainsawWebStart.jnlpWebStart launches OK and I'm asked to approve the certificate, but then I get the following exception.
I'm supposing that it's a WebStart problem, rather than a Chainsaw problem, since Chainsaw starts fine if I start it from my browser. Is this a known problem? Is there any workaround?
java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.javaws.Launcher.executeApplication(Launcher.java:1098)
     at com.sun.javaws.Launcher.executeMainClass(Launcher.java:1045)
     at com.sun.javaws.Launcher.continueLaunch(Launcher.java:896)
     at com.sun.javaws.Launcher.handleApplicationDesc(Launcher.java:468)
     at com.sun.javaws.Launcher.handleLaunchFile(Launcher.java:218)
     at com.sun.javaws.Launcher.run(Launcher.java:165)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NoSuchMethodError: org.apache.log4j.AppenderSkeleton.activate()V
     at org.apache.log4j.chainsaw.ChainsawAppenderHandler.activate(ChainsawAppenderHandler.java:100)
     at org.apache.log4j.chainsaw.ChainsawAppenderHandler.<init>(ChainsawAppenderHandler.java:64)
     at org.apache.log4j.chainsaw.LogUI.createChainsawGUI(LogUI.java:294)
     at org.apache.log4j.chainsaw.LogUI.main(LogUI.java:250)
     ... 11 more

Which version of your eclipse? I am using eclipse 3.0 and I am able to start weblogic 8.1 from eclipse.
I did the following steps:
1.create a new domain through weblogic's configuration wizard --> basic weblogic server domain --> Express --> proive the user name and password --> development mode, and sun sdk (or other jdk) --> your new domain name
2. configure weblogic setting in eclipse: preferences --> weblogic --> 8.1, C:\bea\weblogic81, your newly created domain name --> C:\bea\user_projects\domains (domain directory) --> myserver --> admin (or your user name) --> password --> localhost --> 7001
after that, you should be able to click on "start weblogic server" button from toolbar.
Hope my two cents solve your problem.

Disc Error -2 when starting up from CD

There was a similar post to this a year ago with no answer.
I'm trying to install 10.3 on an iMac 333. When clicking on the installer, the first thing it wants to do is start up from the CD. I get an error message saying "Startup Disc is unable to startup from the CD (-2)" or something like that. If I go to Startup Disc in the control panel, the CD is grayed out so I can't select it. The firmware installer says the firmware is up to date. I have used this CD recently to install a backup copy of 10.3 on an external drive so the CD is OK.
Any ideas on how to install 10.3?

From what you've described, it sounds as if the CD is a Panther Restore disk for another model Mac. You should be using a retail/universal installer version of Panther, which would be black CDs with a silver X, and have no reference to a specific Mac printed on them. For the purpose of identification, the disks shown in this eBay "Panther" listing are the correct ones to use. Although discontinued, Panther is still available from a number of online retailers, as well as eBay. The iMac 333 should have at least 256 MBs of installed memory (if not more), to run Panther without problems.

"Download error" when getting songs from iTunes on iPod touch 2G

Hi all. Recently I've been getting a "Download Error. Tap to retry" message when I'm downloading songs from iTunes on my iPod Touch. It doesn't always happen, but seems to happen most if I leave the Download screen before the song is done downloading and processing. Even though it says "Tap to retry", when I do that, it just errors again. This continues, with frequent pop-up prompts asking for my iTunes password, until I connect my Touch back to iTunes.
I was curious if other people had the same problem and if there is a fix for this or if I just need to stay on the download screen until the song is done.
I have a 32gig iPod Touch 2nd Gen with the latest OS.
Thanks for any info.

Basics from the manual are:
Restart, reset, restore
http://manuals.info.apple.com/enUS/iPod_touch_3.1_UserGuide.pdf

KDE difference when starting programs from desktop or button

This is very strange. I'm using KDE 3.5.4 from normal Arch packages.
I've noticed that Firefox (installed from mozilla.org, not package) looks different when started from the desktop icon, than when started from the kicker button. The desktop icon is a 'Link to application'.
The kicker button is a 'Non-kde application'.
I wondered how it can look different, so I started each copied the process environment to a file of both (one after the other)*. I compared the environments and the interesting this is, one has
DISPLAY=:0
the other has
DISPLAY=:0.0
but that's not so important.
The one started from the desktop has GTK2_RC_FILES and GTK_RC_FILES set, the one from kicker didn't have them. The one started from the desktop also had ~/.kde/share/config/gtkrc-2.0 in GTK2_RC_FILES and this was actually what caused the difference in the firefox look.
After I removed that file, now Firefox looks the same in both cases - the way I set it up with gtk-theme-switch2 (and some personal corrections in ~/.gtkrc-2.0).
NOW, is this a BUG a FEATURE or what? Also,
- can anyone else see this behaviour?
- can anyone check in other KDE versions?
- in other distributions?
* The commands I used, in case anybody needs it:
cat /proc/PID/environ | xargs -0 -n1 | sort > firefox-env.desktop
cat /proc/PID/environ | xargs -0 -n1 | sort > firefox-env.button

You could try repairing the permissions while the drive is in the computer. After that, try ejecting it to see if everything is back to normal. an alternative you could try first is to relaunch the Finder from the force quit menu.

Error when copying songs from cd to hard drive

When I switched from a windows computer to a mac, I copied all of my itunes songs on to a data cd. When I insert the cd into my mac and try to copy the songs onto my hard drive, I get an error saying "Data Error (cyclic redundancy check)". I am pretty sure that you can copy as many songs, to as many computers as you want, but you can only authorize five computer to play the songs. Why is this error popping up? and How can I copy my songs?
Thank You, Margaret

"Data Error (cyclic redundancy check)"
This means the data on the disc is not correct (a bad burn). Try again.
Do you have an iPod or a USB stick.flash drive? You can transfer files that way.
I would not recommend burning them to an audio CD.
The songs were originally converted to AAC, thereby losing data (quality).
Wif you burn to an audio CD and then reimport as AAC, you will again lose data (quality).

Three beeps when starting up from a disc

three beeps when starting from a disc

If your MBP came with lion or mountain lion. You will need to reboot the computer with a bootable Lion DVD. Unlike previous versions of Mac OS X, Lion (OS X 10.7) doesn’t ship with a bootable disc—it’s available only as an installer app downloadable from the Mac App Store. Once you have attained one of these disks. Boot and enter utilities and reformat the hard disk. Ensure that "Guid" is selected under options and that you also select "Mac OS Extended - Journaled. Hopefully before you do any of this you have a very recent time machine backup.
Once reformatted the computer should startup from the Lion Boot DVD without the beeps and you can reinstall the OS and restore your backup.
Good luck

Keeping the album songs order, when importing songs from different sources

Hello
I imported lots of songs into my itunes library from various sources (itunes store, CD's, and audio files converted from my vinyl records) This way, songs from a specific artist, and sometimes from a specific album, could come from different sources.
Now, I hope to arrange all the songs from a specific album to appear in the appropriate order, but I just can't find a way of doing this! The songs just appear in the way iTunes sorts them, without any relation to the original order of the album. Even more, in the iPod itself, the order changes once again with no appearant reason! (Interestingly enough, when I import all the songs of a specific album from one source, the order is kept)
I tried changing the names on the files in itunes to include serial numbers (01, 02 and so on, at the names of the songs). but then again, for some reason, no order is kept.
How can I sort the songs in the album according to the proper order? I don't want to use a special playlist for each album.
Thank you in advance for your replies
Zak.
Windows XP
Windows XP

iTunes sorts things in thew following way (based on having the correct ID3 tag info)
Album > Disc number > Track Number
if you sort things by Album
iTunes does NOT take anything from the file name unless no ID3 tag info is present in the file, then you will see the file name appear as the track name and all other fields blank. ID3 tags are the way most meta-data is handled noawadays.
Hope that helps.

Error message when Importing Songs From a CD.

Everytime I try to Import Songs from a cd it says i tunes has caused an error and needs to close. Then it closes itunes. can anyone help me please??

hannka,
Have a look at this article in the Apple Knowledge Base and let us know if it helps you resolve your situation.

1st generation won't transfer songs from iTunes without factory reset

Hi, my 1st gen won't transfer newly purchased songs from iTunes. I've tried checking for downloads but it checks and states "just checked for downloads"
Also attempted restarting, but that didn't help. Only way I can get it to transfer is a factory reset.

ones had an issue a bit like that with my 1g Apple TV what fixed it for me was to unpair the computer in the appletv settings and then rebind it
sure it took ages to sync everything over again but it fixed it
think I've done it 2 times over the years

IPod touch music does not start songs from the beginning

the songs on an ipod touch does not start from the beginning how do you fix this

In your iTunes Library, check the songs to see if they are set to Remember playback position. If they are, turn that off and Sync the iPod with iTunes for these new changes to take effect.
Highlight a song, right-click/Get Info/Options>Remember playback position:

EVP88 - When starting song from beginning, Tremolo Intensity resets to 0 ?!

Similar Messages

Maybe you are looking for