EWA alert report for java system shows wrong data

Hi,
In our solman system, EWA alert reports are configured every week for all the production systems (both ABAP and JAVA). Recently oracle database was upgraded from 10g to 11g in all the production systems. The EWA alert report for ABAP systems is correctly taking the 11g database details and is suggesting parameter changes. Unforunately the EWA alert report for Java systems is still pointing to 10g database and is suggesting the parameter changes for 10g only but the systems are on 11g.
In SMSY, the database of the java systems is maintained as 11g only and not 10g. STill we are not sure where the data is being fetched from.
Please help me in finding the issue.
Regards,
Ragav

Hello,
iNote 1482818 would be iapplicable if not java checks are being made. You are not reporting no java checks, you are reportijng the check is being performed, but has the wrong value. When you updated the database dis you perform Solman_setup, Mnaaged system setup?
The reason I ask s that is what prepares the java side for EWA. For isntance if you had on old version of ST-SER such as 700_2008_2 then it does not know about Oracle 11.2....but that is on the ABAP side, you would need ST-SEr 701_2010_1 to
recognize ORacle 11.2 on the ABAP side.
So while I am not 100% sure in this specific instance, it seems logical that if the Java side isn't recognizing the Oracle Database version ( which means it is making this check) then you may need to run the Solman_setup, Mnaged system setup to pick up the ability to detect a new version of Oracel on the Java side.
It is certainly worth the try.
Regards,
Paul

Similar Messages

  • Configuration of EWA reports for java systems.

    Hello,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I  am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
    So far, so good according to manuals but when i  want do define data collection in the SMD for Gargage Collection  (task in scheduler) i cannot see host of my portal system.
    I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been  generated.
    Am i missing something?
    Some configuration in SMD?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system  NW 7.0 EP, SPS 6 (planning to SPS 19)
    Thank you for your advices!!!

    Hi Suveer,
    I did the configuration before. I forgot to mention it.
    I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
    Step BI Details
    Cannot invoke CCMSBISETUP on host localhost
    !! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
    Exceptions
    com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
    at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
    ... 37 more
    And also this one>>
    Step RFC Details
    Failed to create TCP/IP RFC on ABAP side (SM59)
    !! Exception :      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    Exceptions
    com.sap.aii.proxy.framework.core.BaseProxyException:      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
    at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
    Thanks a lot for your remarks

  • Earlywatch Alert configuration for Java system

    Hi All,
    I have configured the Solution manager diagnostics for early watch
    alerts for a java system by following the guide "EWA for non-ABAP
    components" in note 976054.
    I am able to get the EWA reports manually, i.e by downloading
    the "service download" file from http://<host-name>:<port>/smd/services
    and uploading it in T-code DSA in Solution manager system and by
    generating the "word" file over there. But i require the automatic
    configuration to work. This automatic reports generation is not working presently.
    Is there any separate configuration to be done for the automatic report
    generation for Non-ABAP systems.
    Waiting for any one of your help,
    Points will be awarded for any useful solutions.
    Regards,
    Phani.

    Hi,
    Normally you have nothig to do, the report should be generated each week automatically. But you have some checks in  document attached to <b>SAP Note 976054</b> to see if everything is activated (SDCCN, NONE Destination, etc...).
    Regards,
    Stephan

  • Setup and configuration for system monitoring and IT Reporting for Java sys

    Hi all,
    How to setup and configuration for system monitoring and IT Reporting for Java system ?
    How to connect Java system to Solman system?
    Regards,
    Neni

    HI,
    What is your OS? You can use SAPCCMSR.exe to monitoring  IT Reporting Java system on Solman.
    Go to solman rz21 create a csmreg user. and configuration fil for agent. copy configuration fil on usr/sap/ccms/..
    Go to comman line cd ../user/sap/xxx/sys/exe/.../ wite SAPCCMSR.00 -R pf=< ...../sys/profile/instans profile> .
    You can se agent on rz10 and use this connaction on rz20 to monitoring and IT Reporting Java system on Solman.
    I hope this help

  • EWA & IT Reporting on MDM System

    Hi,
    We are configuring our MDM System in System Monitoring.
    Is that possible to configure EWA & IT Reporting for MDM Systems in Solution Manager System Monitoring.?
    Pls Advise
    Thanks
    Arun

    Hello
    Please to be clear, EWA for MDM is possible however only the Standard JAVA checks can be made.
    There are no MDM checks for EWA. There maybe MDM checks in the future.
    So 1) Yes EWA can be generated on an MDM system with SDM installed
         2) The EWA will be a standard Java system EWA and will have no MDM specific checks.
    Hope this makes everyhting clear.
    Regards,
    Paul

  • EWA Reporting for NONSAP Systems

    Hi all,
    we need an EWA reporting for NONSAP systems. Is it possible to generate EWA Reports containing OS information (like CPU Utilization, Memory consumption, Filesystems ...) from the monitored systems.
    If possible , are there any "How to guides" for implementing the NONSAP system in SMSY.
    Thanks in advance for your help.
    Regards
    Anton Brehm

    Hello,
    I would refere you to SAP Note 1257308 - FAQ: Using EarlyWatch Alerts
    If you look at section 1. Products and components for whcih teh EarlyWatch Alert is Available, the answer to your question is there, and states the products under section 1.1 and the components under section 1.2.
    This should clarify the answer for you.
    Regards,
    Paul

  • Showing Grey Colour on EWA session only for PI systems

    Hi,
    I have a strange issue when I try to generate EWA report for PI systems. For all other systems the reports are generated fine and in PI systems are exactly the same configurations as in other systems. I want to let you know that in PI systems in SDCCN there I have scheduled Sessions Refresh with target RFC destination SM_<SID>CLNT000_BACK (Solution Manager) and  Maintenance Package  with target RFC SM_<SID>CLNT000_BACK (Solution Manager). After Maintenance Package  is running this generate one session number being send to Solution Manager. I think the configurations in satellite systems are ok (PI systems), but in solution manager after I start to process the data I get one report generated with grey color and only two pages. Do you know which will be the reason? Also I checked note 727998, and this didnu2019t help me.
    Thank you,
    Kind regards,
    Florin Radulea

    >
    Florin Radulea wrote:
    > Hi Paul,
    > Thank you for your response.
    > I checked those notes but my problem is because these systems (PI systems) are not able to generate EWA reports for ABAP stacks. There is not needed to generate reports for JAVA stacks. I want first to generate reports for ABAP stacks. I mention that in SMSY I set PI systems as being as ABAP also.
    > Can you also give me another advices?
    > Thank you,
    > Kind regards,
    > Florin Radulea
    Dear Florin
    You might want to review the following note :
    1322899    EWA incomplete after importing EHP/product incorrec
    Regards
    Amit

  • EWA for Java system / portal

    Hi,
    We have configured EWA for ABAP systems, help required to configure EWA for Java / portal systems
    Ours is  solman EHP1 - support pack level 6
    Regards

    Hello,
    For Java systems you need to perform a managed system setup, then schedule in solman_ewa_admin.
    Regards,
    Paul

  • How to create a report with data using the Crystal Reports for Java SDK

    Hi,
    How do I create a report with data that can be displayed via the Crystal Report for Java SDK and the Viewers API?
    I am writing my own report designer, and would like to use the Crystal Runtime Engine to display my report in DHTML, PDF, and Excel formats.  I can create my own report through the following code snippet:
    ReportClientDocument boReportClientDocument = new ReportClientDocument();
    boReportClientDocument.newDocument();
    However, I cannot find a way to add data elements to the report without specifying an RPT file.  Is this possible?  I seems like it is since the Eclipse Plug In allows you to specify your database parameters when creating an RPT file.
    is there a way to do this through these packages?
    com.crystaldecisions.sdk.occa.report.data
    com.crystaldecisions.sdk.occa.report.definition
    Am I forced to create a RPT file for the different table and column structures I have? 
    Thank you in advance for any insights.
    Ted Jenney

    Hi Rameez,
    After working through the example code some more, and doing some more research, I remain unable to populate a report with my own data and view the report in a browser.  I realize this is a long post, but there are multiple errors I am receiving, and these are the seemingly essential ones that I am hitting.
    Modeling the Sample code from Create_Report_From_Scratch.zip to add a database table, using the following code:
    <%@ page import="com.crystaldecisions.sdk.occa.report.application.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.document.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.definition.*"%>
    <%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
    <%@ page import = "com.crystaldecisions.report.web.viewer.*"%>
    <%
    try { 
                ReportClientDocument rcd = new ReportClientDocument();
                rcd.newDocument();
    // Setup the DB connection
                String database_dll = "Sqlsrv32.dll";
                String db = "qa_start_2012";
                String dsn = "SQL Server";
                String userName = "sa";
                String pwd = "sa";
                // Create the DB connection
                ConnectionInfo oConnectionInfo = new ConnectionInfo();
                PropertyBag oPropertyBag1 = oConnectionInfo.getAttributes();
                // Set new table logon properties
                PropertyBag oPropertyBag2 = new PropertyBag();
                oPropertyBag2.put("DSN", dsn);
                oPropertyBag2.put("Data Source", db);
                // Set the connection info objects members
                // 1. Pass the Logon Properties to the main PropertyBag
                // 2. Set the Server Description to the new **System DSN**
                oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_LOGONPROPERTIES, oPropertyBag2);
                oPropertyBag1.put(PropertyBagHelper.CONNINFO_CRQE_SERVERDESCRIPTION, dsn);
                oPropertyBag1.put("Database DLL", database_dll);
                oConnectionInfo.setAttributes(oPropertyBag1);
                oConnectionInfo.setUserName(userName);
                oConnectionInfo.setPassword(pwd);
                // The Kind of connectionInfos is CRQE (Crystal Reports Query Engine).
                oConnectionInfo.setKind(ConnectionInfoKind.CRQE);
    // Add a Database table
              String tableName = "Building";
                Table oTable = new Table();
                oTable.setName(tableName);
                oTable.setConnectionInfo(oConnectionInfo);
                rcd.getDatabaseController().addTable(oTable, null);
        catch(ReportSDKException RsdkEx) {
                out.println(RsdkEx);  
        catch (Exception ex) {
              out.println(ex);  
    %>
    Throws the exception
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: java.lang.NullPointerException---- Error code:-2147467259 Error code name:failed
    There was other sample code on SDN which suggested the following - adding the table after calling table.setDataFields() as in:
              String tableName = "Building";
                String fieldname = "Building_Name";
                Table oTable = new Table();
                oTable.setName(tableName);
                oTable.setAlias(tableName);
                oTable.setQualifiedName(tableName);
                oTable.setDescription(tableName) ;
                Fields fields = new Fields();
                DBField field = new DBField();
                field.setDescription(fieldname);
                field.setHeadingText(fieldname);
                field.setName(fieldname);
                field.setType(FieldValueType.stringField);
                field.setLength(40);
                fields.add(field);
                oTable.setDataFields(fields);
                oTable.setConnectionInfo(oConnectionInfo);
                rcd.getDatabaseController().addTable(oTable, null);
    This code succeeds, but it is not clear how to add that database field to a section.  If I attempt to call the following:
    FieldObject oFieldObject = new FieldObject();
                oFieldObject.setDataSourceName(field.getFormulaForm());
                oFieldObject.setFieldValueType(field.getType());
                // Now add it to the section
                oFieldObject.setLeft(3120);
                oFieldObject.setTop(120);
                oFieldObject.setWidth(1911);
                oFieldObject.setHeight(226);
                rcd.getReportDefController().getReportObjectController().add(oFieldObject, rcd.getReportDefController().getReportDefinition().getDetailArea().getSections().getSection(0), -1);
    Then I get an error (which is not unexpected)
    com.crystaldecisions.sdk.occa.report.lib.ReportDefControllerException: The field was not found.---- Error code:-2147213283 Error code name:invalidFieldObject
    How do I add one of the table.SetDataFields()  to my report to be displayed?
    Are there any other pointers or suggestions you may have?
    Thank you

  • Add web element in Crystal report for SAP system

    Hi all,
    I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
    But if I add the webelement for Excel sheet ,It shows the control.
    How can I add web element for SAP System? Can't we use web controls in SAP system ?
    Help me in this regard.

    Hi All,
    i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
    OS: MS Windows 7 SP1
    SAP Business One 8.82 pl7
    Crystal report 2011
    Crystal report integration package installed under B1_SHare/Client
    But still the problem persist on the workstation.
    Please help me solve this problem.
    Thank you,
    ana

  • Report showing wrong data

    Hi Gurus,
    When we are generating report in the answers in one column it is showing wrong data from where i have to start for this issue.
    Thanks,
    Rafi

    Pull that column alone,run report, compare the results with your manual query, and also compare the physical query.
    if all are good then try to add other column from any other dim and then do the same as above
    repeat till you know the cause.
    Pls mark if helps

  • How to create reports for java programs?

    Hi,
    I have planned to do a project using java,that will help to create reports for java programs. To create reports for java programs i used two options.
    1)Crystal reports
    2)Write the code to produce reports for each java programs
    The second one little cumbersome.SO i planned to develop a software that is compatible for creating java reports.
    I would like to know how i will do the project?Can you help me to made it a successful project.Hope you can help me.
    Expecting your reply
    PreethiRenjith

    Uggg... Crystal reports...
    I would personally write a generic report generator, It would probably be easier than fighting w/
    crystal reports (CR is popular, but painful :) )
    Anyhow, I've written report generators for many different applications. It is one of the simplest projects you
    can take on, and the results make you feel special --
    If your need nicely formated, portable, printable reports, you could have your report generator make PDF files (the format is open, and VERY simple, plus people like pdf files) you can get the pdf spec from adobe or from wotsit.org (the famous wotsit file format archive).
    enjoy!

  • Can Central System administration be configured for JAVA systems?

    I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
    Can some one tell me, can it be configured for JAVA systems like Portal?
    Thanks
    Aditya

    Hello Aditya
    Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

  • ALERT - Support for Java Critical Patch Update

    ALERT - Support for Java Critical Patch Update
    On October 15th, Java released a critical patch update (CPU) which will require download and upgrade to the Java Runtime Environment (JRE) release – 1.7.0_45.   If upgrading the JRE to this release, the P6 module (also known as Web Access) of the P6 EPPM product line and the Contract Management product, which utilize LiveConnect applets in the browser, will start generating one or more prompts.   To remediate these prompts for the P6 EPPM Web Access module and the Contract Management product, Oracle Primavera will be releasing fixpacks.   Until fixpacks become available, you can use the following workaround to suppress these prompts:  Select the 'Allow' Prompt or 'Yes' prompt for successful loading of applets.  Note: This prompt will occur for each applet. 
    For more information, please refer to the following KM Documents in My Oracle Support.
    For P6 (Web Access), refer to KM Document ID 1591925.1
    For Contract Management, refer to KM Document ID 1592535.1

    I found the answer to my own question. For any newbies out there, if you create an account with Oracle, that is not enough to download patches. You have to have an Oracle Customer Support Identifier associated with your account. Once you have a CSI that you obtain through your employer who has paid for support or through some other means, you then can go into My Oracle Support and enter a request to be added to the given CSI. That request goes into a pending state until the administrator of the CSI grants you privileges to download patches. (NOTE: You might have to bug someone within your organization to get this to happen.) For me, once I was given the privilege, the link worked as it should.

  • Database statistics for Java system in CCMS (RZ20)

    Hi All,
    We have configured CCMS for JAVA system, but unable to view the Database statistics like Tablespace size, Free space, Backup, Performance etc., for it.
    We are able to see these statistics for ABAP stack.
    Is there any possible method (or) class to view these statistics?
    We have even created a new rule-based monitor with class CCMS_DB_mcmtc and CCMS_DB_space_mscl but in vain.
    Even if we cannot view these in RZ20, do we have any other methods like Netweaver administrator or Introscope or some other means....?
    Waiting for some help......
    Regards,
    Phani.

    I don't think there is any separation between CCMS and other systems, all use one database. If you use MaxDB use Database Manager, if smth like SQL Server or Oracle use standard tools of this vendors, like Enterprise Manager third party tools also helps you, cause I don't see any difference between

Maybe you are looking for