EWA Configuration In SolMan 7.1

Dear Gurus,
Greetings...
We implemented Solution Manager 7.1 in our landscape and we need to configure EWA for our production Systems.
Can any one guide me how to configure Early Watch Alerts.
Thanks in advance.
Regards,
D M Reddy

dmreddy wrote:
> Can any one guide me how to configure Early Watch Alerts.
...In the same way you 'installed' the Solution Manager 7.1 i.e. by Referring the SAP guides available at OSS.
You must had downloaded the 'Installation Guide' from OSS to 'install' the solman, similarly you will have to download the 'Configuration Guide' from OSS to 'Configure' the Solman.
service.sap.com/instguides --> SAP Components --> SAP Solution manager -> Solman Release 7.1 --> 'Configuration' and 'Operations' sections !
https://websmp104.sap-ag.de/~sapidb/011000358700000492832011E.PDF
Thanks

Similar Messages

EWA Configuration in Solman 7

Hi Experts,
I am new to SAP Solution Manager and I have to configure EWA.
We have Solution manager 7 SP 15 and ECC 6 systems.
Please guide me the road map to start the configuration.
If any document / screen shots available please share.

Hi,
Check www.service.sap.com/rkt-solman >> Technology
Consultant for SAP Tutors regarding setup of EWA
https://websmp203.sap-ag.de/~sapidb/011000358700001873212008E
Regards
Kannan.K

Error in EWA Configuration??

Hello All,
While doing EWA Configuration in Solman I am getting a runtime error:
Programmatic access to Visual Basic Project is not trusted.Can you please suggest a solution.

Hi,
can your check configuration.
Use this very good link for Solman activities
[http://service.sap.com/rkt]
[http://service.sap.com/rkt ]>Solution Manager>solution manager 7.0-->Technology Consultants &
System Administrators -->It will open the following page:
SAP Solution Manager 7.0: Learning Map for Technology Consultants & System Administrators
there you have to open the tree for EWA, Service level and solutoin reporting, there you will get .sim files
for EW configuration (excellent step by step guide)
[https://websmp201.sap-ag.de/~sapidb/011000358700006936042005E.sim]
Regards,
Muralidhar

Managed System configuration in Solman 7.1 sp11??

Hi All,
I have done new installation of solman 7.1 and upgraded to sp11.
I did system preparation and basis configuration in solman_setup.
I have one query how to add ERP production system to SLD and how to do managed system configuration for that.
I want to add ERP Production system and Managed configuration for that and MOPZ,EWA configuration ERP Production system.
Please help me in this...
Here i attached screen shot for your reference.
Presently in managed system Only Solman system is visible.
Thank in Advance
Chandra

Hi,
Please chekc th ebelow guide
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
https://websmp104.sap-ag.de/~iron/fm/011000358700000209862011E/012002523100005267752014WRK2?TMP=1407918324257#bkm_show1_…
go to Configuration of SAP Solution Manager
Normally y this demo and guide will be available http://service.sap.com/rkt-solman
#sapadmin:: How to assign Product System in SOLMAN 7.1 & How LMDB, SLD, SMSY and Landscape Verification work in SOLMAN7.1
Normally after addition in SLD ,system will adding the system in LMDB ,then added in smsy automatically. check the Job LMDB*
Update the CR content in SLD , check th below note fpor the smae.
Note 669669 - Updating the SAP Component Repository in the SLD
LMDB FQA:
Landscape Management Database (LMDB) – FAQ
Product system Editor in LMDB:
New in SP05: Product System Editor in the Landscape Management Database of SAP Solution Manager 7.1
Maintenance of Product in the System Landscape - SAP Solution Manager Setup - SCN Wiki
Rg,
Karthik

Syntax error in program CL_AC_METRIC_REPOSITORY=======CP When going to managed system configuration in solman 7.1

Dear SAP Gurus,
Good Morning.
I'm getting error in managed system configuration in solman 7.1. Error is like
The system preparation and Basic configuration in working fine, but when we are going to click the managed system configuration Error getting like this.
Solution Manager Version : 7.1
SP Level : SP5
Thanks in Advance.
Regrads,
Kumar BN

Hello Kumar,
I would suggest moving this discussion to this space in SCN: http://scn.sap.com/community/it-management/alm/solution-manager
That will help get you a quicker response.
Thank you,
Kristen

Configuration in SOLMAN 7.1

Hi,
I created one "z" Customized Transaction Type Copy of SMHF , it wont Pick the Customized Transaction type in "Urgent Creation "
how to make it as default ( Customized Transaction Type ).

dmreddy wrote:
> Can any one guide me how to configure Early Watch Alerts.
...In the same way you 'installed' the Solution Manager 7.1 i.e. by Referring the SAP guides available at OSS.
You must had downloaded the 'Installation Guide' from OSS to 'install' the solman, similarly you will have to download the 'Configuration Guide' from OSS to 'Configure' the Solman.
service.sap.com/instguides --> SAP Components --> SAP Solution manager -> Solman Release 7.1 --> 'Configuration' and 'Operations' sections !
https://websmp104.sap-ag.de/~sapidb/011000358700000492832011E.PDF
Thanks

EWA Configuration in Solution Manager 7.1 in SP08

Hi All,
Could any one please advice on the Changes that has been taken place for EWA configuration in Solution Manager 7.1.
Warm Regards,
Sudhakar G

Hi
In addition to above also check below wiki link
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
and below as well
Step By Step Process to configure SLD, MOPZ & EWA in Solution Manager 7.1 SP 8
I assume you have done post setup etc
Regards
Prakhar

CCMS monitoring configuration in SOLMAN

Hi All,
I am doing CCMS configuration in SOLMAN can anyone please resolve my below doubt
1: Is there any extra memory sapce requirement ?
i dont think it would be require ?
2: We want to execute a script or unix command when alert is triggered thru CCMS. How to do that?
BR
Vyash

Hi,
Are you trying to setup monitoring for your Solution Manager system on it's own, or setting up monitoring on Solution Manager which will act as the CCMS CEN?
This link from SAP Help has the step by step instructions on how to assign the OS command to an autoreaction method and then assigning that on to an MTE class and MTE.
[http://help.sap.com/saphelp_nw70/helpdata/EN/27/cbdf3b8dc95136e10000000a114084/frameset.htm]
If you're setting up the CEN, it's slightly different. Create a new auto-reaction method.
1.     Transaction: rz21
2.     Goto: technical infrastructure - configure central system - assign central autoreactions
3.     In 'defined central autoreactions' window: Select u2018newu2019
4.     In the copy box, search for "CCMS_AUTO_REACT_OP_COMMAND"
5.     Create a copy of this method. Complete the information:
6.     Name: Z_UNIX_SCRIPT
7.     In the parameter tab, enter the logical name for the command u2018Z_UNIX_SCRIPT_TO_DO_XYZ'.
8.     Setup the Executable tab as below. This will be the detault.
9.     Setup the control tab as below. This will ensure the alert is processed automatically.
Execute method : Periodically in dialog process
Startup Method: Execute method immediately - on all application servers
Save
You then need to assign the autoreaction
From the Manage Central Autoreactions screen. Select the system to monitor, the MTE class to monitor and the central autoreaction method, then press u2018Assign Central Autoreactionu2019 button. This will make the necessary CCMS updates to start monitoring.
Gareth
Gareth

EWA report from SOLMAN not generating properly.

Hi expert,
EWA report from SOLMAN not generating properly. It's generating like Rating not Determined (Gray) - SAP EarlyWatch Alert.
Solman version: SAP EHP 1 for SAP Solution Manager 7.0
Thanks in advance. Any help appreciated.
Regards,
Debi pal

Hi,
Refer to SAP note: Note 762696 - Grey rating for Earlywatch Alert
Thanks
Anil

Setting up EWA Alert configuration in Solman for Sattelite system

I have followed the sap tutor for setting up EWA in solman which i got from market place, I have done the configuration step by step accordingly but when i see in DSWP i see Red flagged report that it throwed some error and not able to generate report i have activated SDCCN in satllite and all the basic steps but still its not working. Pleaase give some step by step configuration if available to you it ll be a great help.

Hi Rahul,
Please check if the following links help you:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/bc0cb290-0201-0010-3b90-8f3b6bb841ed
http://help.sap.com/saphelp_nw04/helpdata/en/45/cb27429d16db2ce10000000a1550b0/frameset.htm
Hope this helps!
Regards,
Saumya

Solution Manager 7.1 upgrade or configuration in Solman 7.0 EHP1

Hi,
We have a Solution Manager 7.0 EhP1 and there is a project now to configure several functionalities on it such as Charm and Services desk among others. We have the option of configuring all the functionalities in SOlman 7.0 EHP1 or upgrading to 7.1 and then configure the functionalities in the new version.
I would like to know if anybody has implemented an upgrade of Solman 7.0 EHP1 to Solman 7.1 with some functionalities implemented.
I would like as well if in the fact the the Solman 7.0 EHP1 has several functionalities implemented complicates the upgrade to Solman 7.1. The fact that the upgrade is more complicated due to all the functionalities configured, would be important factor to upgrade to 7.1 instead configure it in 7.0 EHP1.
Any information about this would be appreciated.
Many thanks in advance!
Raquel

Newer functionality and more holistically speaking, an ALM Tool, arguably one of the best in the market should be more than enough to take you to 7.1
if all you have is EWA, there is no major risk associated, the new 7.1 has new transaction types for ChaRM and Service Desk, the functionalities of which are better rounded and can support more enterprise wide processes.
Graphical Business Blueprint tool, my favorite feature in 7.1 and enhanced features in Project Implementation tools will only help you manage your implementations/support projects better.
If all you have is EWA, I have half a mind to ask you to do a fresh install, and not bother with the upgrade. Saves you time and lot of effort as well.

Change Management Configuration for SolMan 4.0 SP13

Hi SolMan Experts,
Recently, we have build SolMan4.0. As of now, we have configured this for System monitoring and EWA reports.
Now, we are planning to configure for Change Management.
Could you please provide me the useful documents for CHANGE MANAGEMENT configuration on SolMan4.0.
Thanks in advance!
Regards,
Hari.

Hello
Follow the same steps which mentioned for SP12, as per my understanding there is not much difference in basic configuration of solution manager 4.0.
Create systems in SMSY, RFC connections, create logical system, create project, activate charm, these are the basic steps.
You will get information on this on saphelp and also go through the solman rkt (service.sap.com/rkt),
sap market place  sap support infrastructure  solution manager  media library (u will find all documents)
Even they gave given the charm configuration guide for SP12, u will find that in technical papers.
Hope this will help
Regards,
Sharmishtha

My SLD is configured in SOLMAN sys, How can I connect it with SAP PI system

Dear Friends
My Basis has configured SLD in Solman, Now I cant use SXMB_IFR tcode in my PI that suggest me some error. saying "error in connection cant read secure connection config" or something like that. Plus SLDCHECK tcode is also not happy. it suggest that RFC connections are missing.
It is clear that My SLD is not linked with PI system. something is missing in technical system part and its not even bridged. but since I am not a BASIS guy I dont know How can I configure it. Not even my BASIS guy understands that I need to bring SOLMAN SLD to PI.
Can anyone suggests me How can I bring my SOLMAN SLD to PI system so I can run SXMB_IFR tcode ? I need to create some rfc connection like LCRSAPRFC and SAPSLDAPI but dont know the connection type like t, or something else. Please englight me by suggesting How can I bring my SOLMAN SLD to PI.
One intresting observation is when I try to run my SLD over url using PI system as host it comes but says SLD is not configured properly and when I did the same practice with SOLMAN host it works fine and I didnt receive any error.
Please reply me. your any help will be appreciated greatly.
Regards
Naeem

Hi,
Preferebly PI should have it's own SLD. And SOLMAN could use PI's SLD.
Please check Installation guide and SLD Administration Guide from Service Market place before finalizing SLD architecture in your System landscape.
I guess SOLMAN will have only one Instance in system landscape. (Not three system landscape like Dev, Qa, Prod).
If you want to go ahead with your current SLD plan, then Change your SLD hostname in Exchange Profile of PI, to SOLMAN Host name.
Regards
Praveen K
Edited by: Praveen Kurni on Jul 7, 2011 6:12 PM

EWA Configuration... DUMPS... user SAPSYS

Hi,
I have setup the EWA report to my sandbox. Report is generating fine. I did all the setup from my own user which has S_RFC, S_RFCACL, & S_TCODE Objects. I have SAP_ALL Authorization. Everything is working fine. sandbox is generating early watch reports fine. But the problem is I am getting DUMPS in my Sandbox everyhour in 33 mins... and its dumping sooo many times. I had 147 dumps yesterday. Here is the Dump Log (ST22)
User "SAPSYS" has no RFC authorization for function group "SCUST_SYS_INFO ".
What happened?
The user "SAPSYS" attempted to execute a function module from
the function group "SCUST_SYS_INFO ", but does not have the appropriate
RFC authorization.
Error in ABAP application program.
The current ABAP program "SAPLSCUST_SYS_INFO" had to be terminated because one
of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
The user "SAPSYS" has no RFC authorization for the function group
"SCUST_SYS_INFO ". Please contact your system administrator to give you
the RFC authorization for the required function groups (e.g. "SCUST_SYS_INFO
The RFC authorization object is S_RFC.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
Now i dont understand that from where this user came up SAPSYS in client 000... and we dont use client 000. strickly not allowed. I didnt use this user when generating RFS's.... Everything I did using my own user.
Please help ASAP. it is very critical...
Thanks,
Points will be posted for sure!!!

Hi,
Those are the following RFC's I am using;
In Solman: SM_XXXCLNTXXX_READ- user: Blank
                 SM_XXXCLNTXXX_TMW - user: Blank
                 SM_XXXCLNTXXX_TRUSTED - user: RFC-it has all the other rfc permissions as well as the you've provided me.
In CRM:    SM_XXXCLNTXXX_BACK - user: SOLMANXXX
                SM_XXXCLNTXXX_TRUSTED- user: checked on Current user
Please currect me if I am wrong. I think In solution manager, the user for xxxREAD should be SOLMANSMP001 which is standard under my other system when I go to sm59..
and for XXX_TMW, I should have user: SOLTMWSMP001...
Please correct me If I am wrong.
Thanks, I really appreciate your help

Error in Automatic configuration of solman

Dear Experts:
I am performing managed system configuration for a portal system in our landscape. Solman version 7.1 sps 8. Portal 7.0 ehp2. Wily version 9.0
In the final step automicatic confifuration. I am seeing this error"Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration". has any one else seen this before.
SidAdm is the owner for wilyintroscope instlal folder.
Please let me know your thoughts.
Message
Details
On instance : sapTP0ci/JC00
Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration
On instance : sapTP0ci/JC00
Created destination TP0_JC00_server0
Created destination SapStartSrv_sapTP0ci_TP0_00
Created action SAP GC|TP0_JC00_server0 - SAP GC|TP0_JC00_server0
Created action TP0|sapTP0ci_TP0_00 - SapStartSrv_sapTP0ci_TP0_00
Created 2 action(s).
Retrieving list of Enterprise Managers failed: All configured Enterprise Managers are offline - check configuration.
Exception
java.sql.SQLException: All configured Enterprise Managers are offline - check configuration.
at com.sap.sup.admin.wily.jdbc.EMOverview.getQueryEMgrs(EMOverview.java:560)
at com.sap.sup.admin.wily.jdbc.EMOverview.populateAgentCache(EMOverview.java:879)
at com.sap.sup.admin.wily.jdbc.EMOverview.checkAgentCache(EMOverview.java:953)
at com.sap.sup.admin.wily.jdbc.EMOverview.getAgentEMgrs(EMOverview.java:582)
at com.sap.sup.admin.wily.hostagent.Setup.emCanBeAccessed(Setup.java:342)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:100)
at com.sap.sup.admin.wily.hostagent.Setup.executeSetup(Setup.java:64)
at com.sap.sup.admin.setup.AppCfgTasks.configureEPAgent(AppCfgTasks.java:134)
at com.sap.sup.admin.setup.SetupStep.runExec(SetupStep.java:578)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:445)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:674)
at com.sap.sup.admin.setup.SapCluster.setup(SapCluster.java:2058)
at com.sap.sup.admin.setup.SapCluster.runClusterSetup(SapCluster.java:2298)
at com.sap.sup.admin.setup.ws.SetupWrapper._rManagedSetup(SetupWrapper.java:500)
at com.sap.sup.admin.setup.ws.SetupWrapper.managedSetup(SetupWrapper.java:327)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:331)
at com.sap.engine.services.webservices.runtime.JavaClassImplementationContainer.invokeMethod(JavaClassImplementationContainer.java:76)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:174)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:81)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:90)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Hugo Amo is correct, you have to check the wily configuration on solman_setup 3.1 (Configure CA wily Introscope), there you can see the status of connection between solman and wily.
for a correct configuration just follow that steps:
1.- click on edit button
2.- click on "import exiting Installation"
3.- on popup enter the path where wily is installed like F:\usr\sap\ccms\instroscope
4.- click on user management and select flag for connection user
5.- save
you have to get the status green like this one
Regards,
Luis

EWA Configuration In SolMan 7.1

Similar Messages

Maybe you are looking for