EWA does not report security notes missing and java systems

Hello guys,
Our early watch report don't contain section 7.1 with security notes missing in the system.
We have solution manager 7.0 with ST-SER 700_2008_1 SP4.
What do we need to configure so that ewa reports security notes missing?
Another doubt, how can I get the list of security notes missing in java stack system like portal?
thanks.
regards,
Filipe

hello Filipe
Below is a line from the SAP note 888889.
"In the SAP EarlyWatch Alert report, the "Service Preparation Check" unit complains that Note 888889 is not implemented. As a result, the check for security-relevant notes can only be carried out partially in the "Security" section."
Looks like that could be the reason for that.
For JAVA stack there is no note concept.
Thanks & regards
bala

Similar Messages

I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

OK, lets do a complete overhaul to make sure it's working ok.
First to check your Windows system file for any corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer.
Start iTunes and see if it is ok.
If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
(Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Not able to start the Sun Java System Access Manager 7 Console

Hi All,
I have successfully installed the Sun Java System Portal Server 7 on RHEL 4.0.The problem I am facing is not able to start the Sun Java System Access Manager 7 Console while accessing the URL: http://fqdn:8080/amconsole
As soon as I try to access this URL it gives me following Excepiton:::::::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NullPointerException]
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:386)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
     com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:338)
     com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.GeneratedMethodAccessor106.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
If anyone have any idea about the cause of this error,please let me know.All suggestions are welcome .
Thanx and Regards,
Chirag.

Hi All,
I am having exactly the same problem with the same stack trace. Has anybody have an idea how to fix this?
I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) The first time installation was fine and I was able to bring the Access Manager console. I was able to create users groups etc.
However, when I uninstalled and installed it again, I got exactly the same error described in the thread. Running "amserver start" and "amserver restart" did not help. I did the installation one more time
but again I got the same error.
Thanks for the help.
celikkan

Security 2009-01 and Java release 8 - which first?

Software update shows it's time for Security 2009-01 and Java Release 8. Java comes first on the list.
I do updates via downloads from Apple and install later. Should I install the Java release first?
Mrs H
BTW - The updates for Security used to indicate "Client" or "Server". This one just indicates Tiger PPC, Intel Tiger, Server Tiger, Leopard Server etc - has Client gone by the wayside?

Hi BDA,
A Safe Boot will prevent most of those from interfering, btw, this G4 I did the Alphabetically...
Alphabetically! Well, I'll be... I thought there was some secret significance here to the sequence - for example, you must do QT before iT.
...updating to had 5 Firewire Drives, 2 eSata Drives, 14 USB Devices besides the KB & Mouse, and four USB RAID Drives hooked up to it during the Updates... no problem here.
So maybe I don't have to disconnect my modem? (I leave the printer disconnected anyway, so I can connect to whichever Mac I need for printing)
Was that Klaus that told you that! (about points)? LOL
No, just my own thinking.
Yes indeed, thank you again, great news that you're getting more comfortable/knowledgeable about your Macs!
And it's only taken 20 years of working with Macs to do that!
Mrs H
To see where my current frustrations/confusions/issues lie check out:
http://discussions.apple.com/thread.jspa?threadID=1903870&tstart=0
and
http://discussions.apple.com/thread.jspa?threadID=1888621&tstart=0

How deploy the EJB in security on the Sun Java System Application Server 9?

I hava deploied a simple Hello EJB Object on PE 9(Sun Java System Application Server Platform Edition 9). I can use this EJB object without user name an password On any client. See the following code section:
     public static void main(String[] args) {
          try{
               Properties props = System.getProperties();
               props.put(Context.INITIAL_CONTEXT_FACTORY,"com.sun.enterprise.naming.SerialInitContextFactory");
               props.put(Context.PROVIDER_URL,"iiop://localhost:3700");
               Context ctx = new InitialContext(props);
               Hello h = (Hello) ctx.lookup("ejb/test/Hello");
               System.out.println(h.sayHello());
          }catch(Exception e){
               e.printStackTrace();
Please tell me how deploy the EJB in security on the Sun Java System Application Server 9? So that, The client must set the user name and password when lookup the ejb object. Like the following:
props.put(Context.SECURITY_PRINCIPAL,"admin")
props.put(Context.SECURITY_CREDENTIALS,"1234");

Guys,
I too have the same issue. If anyone has an answer, please let me know.
Is this GlassFish problem? or Prgram issue?
Find below the source code
package TransactionSecurity.bean;
import javax.annotation.Resource;
import javax.annotation.security.DeclareRoles;
import javax.annotation.security.PermitAll;
import javax.annotation.security.RolesAllowed;
import javax.ejb.Remote;
import javax.ejb.SessionContext;
import javax.ejb.Stateless;
import javax.ejb.TransactionAttribute;
import javax.ejb.TransactionAttributeType;
@Stateless
@Remote(TSCalculator.class)
@DeclareRoles({"student", "teacher"})
public class TSCalculatorBean implements TSCalculator {
     private @Resource SessionContext ctx;
     @PermitAll
//     @TransactionAttribute(TransactionAttributeType.REQUIRES_NEW)
     public int add(int x, int y) {
          System.out.println("CalculatorBean.add Caller Principal:" + ctx.getCallerPrincipal().getName());
          return x + y;
     @RolesAllowed( { "student" })
     public int subtract(int x, int y) {
          System.out.println("CalculatorBean.subtract Caller Principal:" + ctx.getCallerPrincipal().getName());
          System.out.println("CalculatorBean.subtract isCallerInRole:" + ctx.isCallerInRole("student"));
          return x - y;
     @RolesAllowed( { "teacher" })
     public int divide(int x, int y) {
          System.out.println("CalculatorBean.divide Caller Principal:" + ctx.getCallerPrincipal().getName());
          System.out.println("CalculatorBean.divide isCallerInRole:" + ctx.isCallerInRole("teacher"));
          return x / y;
package TransactionSecurity.bean;
import javax.ejb.Remote;
@Remote
public interface TSCalculator {
        public int add(int x, int y);
        public int subtract(int x, int y);
        public int divide(int x, int y);
package TransactionSecurity.client;
import java.util.Properties;
import javax.ejb.EJBAccessException;
import javax.naming.Context;
import javax.naming.InitialContext;
import TransactionSecurity.bean.TSCalculator;
public class TSCalculatorClient {
     public static void main(String[] args) throws Exception {
          // Establish the proxy with an incorrect security identity
          Properties env = new Properties();
          env.setProperty(Context.SECURITY_PRINCIPAL, "kabir");
          env.setProperty(Context.SECURITY_CREDENTIALS, "validpassword");
        env.setProperty(Context.INITIAL_CONTEXT_FACTORY,"com.sun.appserv.naming.S1ASCtxFactory");
        env.setProperty(Context.PROVIDER_URL,"iiop://127.0.0.1:3700");
        env.setProperty("java.naming.factory.initial","com.sun.enterprise.naming.SerialInitContextFactory");
        env.setProperty("java.naming.factory.url.pkgs","com.sun.enterprise.naming");
        env.setProperty("java.naming.factory.state","com.sun.corba.ee.impl.presentation.rmi.JNDIStateFactoryImpl");
        env.setProperty("org.omg.CORBA.ORBInitialHost", "127.0.0.1");
        env.setProperty("org.omg.CORBA.ORBInitialPort", "3700");
          InitialContext ctx = new InitialContext(env);
          TSCalculator calculator = null;
          try {
               calculator = (TSCalculator) ctx.lookup(TSCalculator.class.getName());
          } catch (Exception e) {
               System.out.println ("Error in Lookup");
               e.printStackTrace();
               System.exit(1);
          System.out.println("Kabir is a student.");
          System.out.println("Kabir types in the wrong password");
          try {
               System.out.println("1 + 1 = " + calculator.add(1, 1));
          } catch (EJBAccessException ex) {
               System.out.println("Saw expected SecurityException: "
                         + ex.getMessage());
          System.out.println("Kabir types in correct password.");
          System.out.println("Kabir does unchecked addition.");
          // Re-establish the proxy with the correct security identity
          env.setProperty(Context.SECURITY_CREDENTIALS, "validpassword");
          ctx = new InitialContext(env);
          calculator = (TSCalculator) ctx.lookup(TSCalculator.class.getName());
          System.out.println("1 + 1 = " + calculator.add(1, 1));
          System.out.println("Kabir is not a teacher so he cannot do division");
          try {
               calculator.divide(16, 4);
          } catch (javax.ejb.EJBAccessException ex) {
               System.out.println(ex.getMessage());
          System.out.println("Students are allowed to do subtraction");
          System.out.println("1 - 1 = " + calculator.subtract(1, 1));
}The user kabir is created in the server and this user belongs to the group student.
Also, I have enabled the "Default Principal To Role Mapping"
BTW, I'm able to run other EJB3 examples [that does'nt involve any
security features] without any problems.
Below is the ERROR
Error in Lookupjavax.naming.NamingException: ejb ref resolution error for remote business interfaceTransactionSecurity.bean.TSCalculator [Root exception is java.rmi.AccessException: CORBA NO_PERMISSION 0 No; nested exception is:
     org.omg.CORBA.NO_PERMISSION: ----------BEGIN server-side stack trace----------
org.omg.CORBA.NO_PERMISSION:   vmcid: 0x0 minor code: 0 completed: No
     at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.handle_null_service_context(SecServerRequestInterceptor.java:407)
     at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.receive_request(SecServerRequestInterceptor.java:429)
     at com.sun.corba.ee.impl.interceptors.InterceptorInvoker.invokeServerInterceptorIntermediatePoint(InterceptorInvoker.java:627)
     at com.sun.corba.ee.impl.interceptors.PIHandlerImpl.invokeServerPIIntermediatePoint(PIHandlerImpl.java:530)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.getServantWithPI(CorbaServerRequestDispatcherImpl.java:406)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:224)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1846)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1706)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1088)
     at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:223)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:806)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:563)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2567)
     at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
----------END server-side stack trace---------- vmcid: 0x0 minor code: 0 completed: No]
     at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:425)
     at com.sun.ejb.containers.RemoteBusinessObjectFactory.getObjectInstance(RemoteBusinessObjectFactory.java:74)
     at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
     at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:403)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at TransactionSecurity.client.TSCalculatorClient.main(TSCalculatorClient.java:35)
Caused by: java.rmi.AccessException: CORBA NO_PERMISSION 0 No; nested exception is:
     org.omg.CORBA.NO_PERMISSION: ----------BEGIN server-side stack trace----------
org.omg.CORBA.NO_PERMISSION:   vmcid: 0x0 minor code: 0 completed: No
     at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.handle_null_service_context(SecServerRequestInterceptor.java:407)
     at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.receive_request(SecServerRequestInterceptor.java:429)
     at com.sun.corba.ee.impl.interceptors.InterceptorInvoker.invokeServerInterceptorIntermediatePoint(InterceptorInvoker.java:627)
     at com.sun.corba.ee.impl.interceptors.PIHandlerImpl.invokeServerPIIntermediatePoint(PIHandlerImpl.java:530)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.getServantWithPI(CorbaServerRequestDispatcherImpl.java:406)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:224)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1846)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1706)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1088)
     at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:223)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:806)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:563)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2567)
     at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
----------END server-side stack trace---------- vmcid: 0x0 minor code: 0 completed: No
     at com.sun.corba.ee.impl.javax.rmi.CORBA.Util.mapSystemException(Util.java:277)
     at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:205)
     at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.invoke(StubInvocationHandlerImpl.java:152)
     at com.sun.corba.ee.impl.presentation.rmi.bcel.BCELStubBase.invoke(BCELStubBase.java:225)
     at com.sun.ejb.codegen._GenericEJBHome_Generated_DynamicStub.create(com/sun/ejb/codegen/_GenericEJBHome_Generated_DynamicStub.java)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sun.ejb.EJBUtils.lookupRemote30BusinessObject(EJBUtils.java:372)
     ... 5 more
Caused by: org.omg.CORBA.NO_PERMISSION: ----------BEGIN server-side stack trace----------
org.omg.CORBA.NO_PERMISSION:   vmcid: 0x0 minor code: 0 completed: No
     at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.handle_null_service_context(SecServerRequestInterceptor.java:407)
     at com.sun.enterprise.iiop.security.SecServerRequestInterceptor.receive_request(SecServerRequestInterceptor.java:429)
     at com.sun.corba.ee.impl.interceptors.InterceptorInvoker.invokeServerInterceptorIntermediatePoint(InterceptorInvoker.java:627)
     at com.sun.corba.ee.impl.interceptors.PIHandlerImpl.invokeServerPIIntermediatePoint(PIHandlerImpl.java:530)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.getServantWithPI(CorbaServerRequestDispatcherImpl.java:406)
     at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:224)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1846)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1706)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:1088)
     at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:223)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:806)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.dispatch(CorbaMessageMediatorImpl.java:563)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.doWork(CorbaMessageMediatorImpl.java:2567)
     at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:555)
----------END server-side stack trace---------- vmcid: 0x0 minor code: 0 completed: No
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at com.sun.corba.ee.impl.protocol.giopmsgheaders.MessageBase.getSystemException(MessageBase.java:913)
     at com.sun.corba.ee.impl.protocol.giopmsgheaders.ReplyMessage_1_2.getSystemException(ReplyMessage_1_2.java:131)
     at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.getSystemExceptionReply(CorbaMessageMediatorImpl.java:685)
     at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.processResponse(CorbaClientRequestDispatcherImpl.java:472)
     at com.sun.corba.ee.impl.protocol.CorbaClientRequestDispatcherImpl.marshalingComplete(CorbaClientRequestDispatcherImpl.java:363)
     at com.sun.corba.ee.impl.protocol.CorbaClientDelegateImpl.invoke(CorbaClientDelegateImpl.java:219)
     at com.sun.corba.ee.impl.presentation.rmi.StubInvocationHandlerImpl.privateInvoke(StubInvocationHandlerImpl.java:192)
     ... 13 moreAny help is appreciated.
Regards!
Nithi.
Edited by: EJB3 on Aug 17, 2008 8:17 PM

Apache and Java System Web server

Is it possible to run Apache Web Server and Java System Web Server on the same computer or is one of them which has to run.

Sure it can be run simultaneously as long as they don�t share the same Socket (pair of IP-Address/TCP-Port).
But the question is does it make sense at all - what would you get from Apache which is not there in SJS WS?

Why does New Report.vi not always minimize the document?

I’m using Report Generation Toolkit for Microsoft Office to generate documents based on bookmarks in a template document. It works very well and I’m pleased with it. However, it usually (not always) opens up the template document and displays it while inserting the data in the various bookmarks. The process really slows down when this happens. The document is to automatically print to the default printer when the print button is clicked without opening up.
I’m using the New Report.vi with Window State set to Minimized, Report Type to Word and the template document’s path and file name sent to Template. All other settings are default.
After the bookmarks are inserted I use the Print Report, Dispose Report and Simple Error Handler vi’s. There are no errors displayed.
OS: XP-Pro
LV: v.7.1
Report Generation Toolkit: v.1.0.1
Word: Office 2003 (Office 2003 was installed before installing the Report Generation Toolkit.)
Thanks,

Attached is a sample of the printing vi along with a subvi for support. Also attached is a sample template. This vi is a much simplified version of what I'm using. However, it also opens up the Word template. It opens and closes very quickly, but it should not open at all. In my final program, it really chokes up when the template opens.
I hope you can find something about it.
It's not clear to me what is meant by "WindowState input of no change."
Thanks,
Dave J.
Attachments:
Print Test.zip ‏47 KB

After upgrade to Tiger, Keychain does not show Secure Notes

I've just finished upgrading from Panther to Tiger. I began with a Psync backup, did a fresh intall of Tiger on the boot drive, and have migrated user data manually. Everything is kosher except that Keychain 3.3 is not displaying any of my Keychain 3.1 Secure Notes.
There doesn't seem to be anything wrong with the keychain itself. I can open it under Keychain 3.1 and it displays the notes just fine. I've also run Kechain 3.3 First Aid and it doesn't think there is a problem either.
Any clues?

I solved my problem, and of course the answer was staring me in the face the whole time. I keep a separate keychain for notes and certain other passwords, and this keychain had to be initially opened manually by double-clicking it. Information about secondary keychains is stored in the Keychain preferences file (which I had migrated over), but apparently was not enough to get Keychain 3.5 to open the file automatically. The keychain file only needs to be opened manually one time.
Hope this saves somebody else a few minutes of frustration.

How not to use Cold Fusion and Java

Overview
This write up is intended to give java developers that are
developing ColdFusion applications some beneficial information:
things that are not documented.
Scenario
The company builds enterprise class web application software
for fortune 500 companies. It had purchased a CF 7 based product,
had and existing proprietary J2EE based product, and needed to
integrate the two while meeting a host of new requirements. These
requirements were based on delivering a better user experience,
faster / cheaper integration, increased flexibility /
configuration, useablily, decreasing maintenance costs, the ability
to deploy in either install or ASP models. An initiative was
started to create a new framework that integrated the best of each
technologies. Tactically, this meant that we were to build a hybrid
CF and java application: one that used building blocks (decoupled /
cohesive components) that would allow applications to be rapidly
assembled, configured and deployed. This made sense on several
levels, the team was composed of Java and CF developers, the CF
rapid application development was very productive, there is great
functionality delivered in the CF platform and initial performance
tests showed no cause for alarm
The agreed upon design, based on requirements, and analysis
by both the CF and Java staff has us using CF in the presentation
layer, using a CF based MVC, use of CF based web services. The MVC
was deployed using CFC inheritance for model objects and views made
use of CF custom tags. The internals of the application, used a
rules engine, some proprietary java, ORM, and other J2EE
technology. The initial performance of the system was reasonable.
We pushed on with product implementation.
Then it was time to load test the application, and tune it.
Under load the response times were orders of magnitude slower,
sometimes the pages even timed out.
Armed with our profiler, oracle execution plans and we
charged ahead addressing issue after issue. Note that we took
meticulous care in tweaking the active thread pool and ensuring
that our CF setup was tuned for our application. None of the
observations here are a condemnation of the language; rather they
are aspects that, when considered together, not conducive for
building integrated java and CF frameworks that use a structured /
OO programming practices. Further detail can be provided on
request.
CFC inheritance should be avoided - resolution of variable
scope is expensive even if properly declared.
Since CF creates a class per method under the covers call
stacks become very large, especially if used in a loop. This is
nominally exacerbated by CF calls necessary to set up for the
method call (String.toUpper()).
Nesting of loops and if statements should be kept to a
minimum - the conditional for each lookup of logical operator like
LT, GT are synchronized. Under load this results in thread waits.
Jrun has as single thread pool - both http and web service
requests use the same pool. Under load this leads to thread
deadlock. There are work arounds, but they are painful.
Recursion should be avoided - we had a few recursive routines
and these had to be rewritten.
Custom Tags - should be used sparingly - each custom tag
makes a synchronized call to the license server - (This may be
fixed in CF 8)
Summary
In the end we got the performance to reasonable numbers, but
we ended up moving some code to java (Custom Tags) and getting rid
of 'good programming' practices (Inheritance, loops, etc), mandated
proper variable scoping for those things left over. We prototyped a
sans cold fusion implementation and had an order of magnitude
improvement in performance and number of requests served per
second.
The lesson? Use Coldfusion in its sweet spot: make a query,
iterate over the results and format for display. Extensive use of
structure programming techniques or OO CFCs should be avoided: they
will work but under load - but are better as a prototype. Building
frameworks in CF? Think twice, no three times, and, if you must, be
minimalist.
Text

interesting aslbert123,
Not that I doubt you, but could you answer some questions
about your implementation that was so slow:
1.) Did you put your CFCs in the application or server scope?
2.) Were you initializing your CFCs, via CreateObject or
<cfinvoke>, on every request?
3.) Are you sure that you were properly Var'ing every
variable in your methods? (people typically forget about query
names and loop iterator variables)
4.) Could you give examples of how your inheritence was set
up?
5.) For CustomTags, did you call them the old <cf_tag>
way or the newer, better-performing <cfimport> way?
6.) How did you connect CF to Java exactly?
Thanks,
Aaron

The connectivity between ABAP and JAVA system is not working properly.

Hi,
I have Installed ECC5.0 ABAP system and Netweaver JAVA system with different SID's in single box. While Installing JAVA systen I have selected UME as ABAP system and Installation was success. Once I restart MMC the JAVA server process thowing an rc -11113.
I have pasted trace file for Server process. Please send me any suggestions ASAP.
[Thr 4500] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 4500] JLaunchISetClusterId: set cluster id 31689350
[Thr 4500] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 4500] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 4180] Thu Apr 19 12:06:29 2007
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
[Thr 4180] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
[Thr 4748] Thu Apr 19 12:06:30 2007
[Thr 4748] JLaunchIExitJava: exit hook is called (rc=-11113)
[Thr 4748] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 940893 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 4748] JLaunchCloseProgram: good bye (exitcode=-11113)
Thanks,
Suraj

Hi,
It clearly says the problem is with virtual memory. SO you need to change your virtual memory settings using configtool.
See the relevant note.940893
Make changes in the VM parameters for Bootstarp, Dispatched and the server nodes. Your -Xms should be less than equal to -Xmx.
Restart the cluster then.
It should work.
Do reward good points.

Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1

Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.

Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks.

Not able to Start the Sun Java System Portal Server 7

Hi All,
I have already installed Sun Java System Portal Server 7 successfully.But when I tried to access the URL : http://fqdn:8080/portal it gives the following excepiton:::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: SMSException Exception Code:5
Message:sms-UNKNOWN_EXCEPTION_OCCURRED
The lower level exception message
no-server-found
The lower level exception:
java.rmi.RemoteException: no-server-found
     at com.sun.identity.jaxrpc.JAXRPCUtil.getValidURL(JAXRPCUtil.java:115)
     at com.sun.identity.jaxrpc.SOAPClient.call(SOAPClient.java:165)
     at com.sun.identity.jaxrpc.SOAPClient.send(SOAPClient.java:295)
     at com.sun.identity.sm.jaxrpc.SMSJAXRPCObject.read(SMSJAXRPCObject.java:123)
     at com.sun.identity.sm.SMSEntry.read(SMSEntry.java:479)
     at com.sun.identity.sm.SMSEntry.read(SMSEntry.java:455)
     at com.sun.identity.sm.SMSEntry.(SMSEntry.java:288)
     at com.sun.identity.sm.CachedSMSEntry.getInstance(CachedSMSEntry.java:316)
     at com.sun.identity.sm.CachedSubEntries.(CachedSubEntries.java:77)
     at com.sun.identity.sm.CachedSubEntries.getInstance(CachedSubEntries.java:199)
     at com.sun.identity.sm.ServiceManager.initialize(ServiceManager.java:868)
     at com.sun.identity.sm.ServiceManager.(ServiceManager.java:140)
     at com.sun.portal.desktop.context.DSAMEConnection.init(DSAMEConnection.java:131)
     at com.sun.portal.desktop.context.DSAMEConnection.(DSAMEConnection.java:84)
     at com.sun.portal.desktop.context.DSAMEServiceAppContext.initAdminDSAMEConnection(DSAMEServiceAppContext.java:57)
     at com.sun.portal.desktop.context.DSAMEServiceAppContext.init(DSAMEServiceAppContext.java:43)
     at com.sun.portal.desktop.context.PSDesktopAppContext.initServiceAppContext(PSDesktopAppContext.java:163)
     at com.sun.portal.desktop.context.PSDesktopAppContext.init(PSDesktopAppContext.java:87)
     at com.sun.portal.desktop.context.PSDesktopContextFactory.initDesktopAppContext(PSDesktopContextFactory.java:141)
     at com.sun.portal.desktop.context.PSDesktopContextFactory.init(PSDesktopContextFactory.java:105)
     at com.sun.portal.desktop.context.PSDesktopContextFactoryManager.getFactory(PSDesktopContextFactoryManager.java:21)
     at com.sun.portal.desktop.DesktopServlet.getDesktopContextFactory(DesktopServlet.java:190)
     at com.sun.portal.desktop.DesktopServlet.init(DesktopServlet.java:232)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:118)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1093)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:756)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:177)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
     at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:226)
     at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2071)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:300)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:118)
     com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:226)
     com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2071)
root cause
com.sun.portal.desktop.context.ContextError: SMSException Exception Code:5
Message:sms-UNKNOWN_EXCEPTION_OCCURRED
The lower level exception message
no-server-found
The lower level exception:
java.rmi.RemoteException: no-server-found
     at com.sun.identity.jaxrpc.JAXRPCUtil.getValidURL(JAXRPCUtil.java:115)
     at com.sun.identity.jaxrpc.SOAPClient.call(SOAPClient.java:165)
     at com.sun.identity.jaxrpc.SOAPClient.send(SOAPClient.java:295)
     at com.sun.identity.sm.jaxrpc.SMSJAXRPCObject.read(SMSJAXRPCObject.java:123)
     at com.sun.identity.sm.SMSEntry.read(SMSEntry.java:479)
     at com.sun.identity.sm.SMSEntry.read(SMSEntry.java:455)
     at com.sun.identity.sm.SMSEntry.(SMSEntry.java:288)
     at com.sun.identity.sm.CachedSMSEntry.getInstance(CachedSMSEntry.java:316)
     at com.sun.identity.sm.CachedSubEntries.(CachedSubEntries.java:77)
     at com.sun.identity.sm.CachedSubEntries.getInstance(CachedSubEntries.java:199)
     at com.sun.identity.sm.ServiceManager.initialize(ServiceManager.java:868)
     at com.sun.identity.sm.ServiceManager.(ServiceManager.java:140)
     at com.sun.portal.desktop.context.DSAMEConnection.init(DSAMEConnection.java:131)
     at com.sun.portal.desktop.context.DSAMEConnection.(DSAMEConnection.java:84)
     at com.sun.portal.desktop.context.DSAMEServiceAppContext.initAdminDSAMEConnection(DSAMEServiceAppContext.java:57)
     at com.sun.portal.desktop.context.DSAMEServiceAppContext.init(DSAMEServiceAppContext.java:43)
     at com.sun.portal.desktop.context.PSDesktopAppContext.initServiceAppContext(PSDesktopAppContext.java:163)
     at com.sun.portal.desktop.context.PSDesktopAppContext.init(PSDesktopAppContext.java:87)
     at com.sun.portal.desktop.context.PSDesktopContextFactory.initDesktopAppContext(PSDesktopContextFactory.java:141)
     at com.sun.portal.desktop.context.PSDesktopContextFactory.init(PSDesktopContextFactory.java:105)
     at com.sun.portal.desktop.context.PSDesktopContextFactoryManager.getFactory(PSDesktopContextFactoryManager.java:21)
     at com.sun.portal.desktop.DesktopServlet.getDesktopContextFactory(DesktopServlet.java:190)
     at com.sun.portal.desktop.DesktopServlet.init(DesktopServlet.java:232)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:118)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1093)
     at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:756)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:177)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:161)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
     at com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:226)
     at com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2071)
     com.sun.portal.desktop.context.DSAMEConnection.init(DSAMEConnection.java:135)
     com.sun.portal.desktop.context.DSAMEConnection.(DSAMEConnection.java:84)
     com.sun.portal.desktop.context.DSAMEServiceAppContext.initAdminDSAMEConnection(DSAMEServiceAppContext.java:57)
     com.sun.portal.desktop.context.DSAMEServiceAppContext.init(DSAMEServiceAppContext.java:43)
     com.sun.portal.desktop.context.PSDesktopAppContext.initServiceAppContext(PSDesktopAppContext.java:163)
     com.sun.portal.desktop.context.PSDesktopAppContext.init(PSDesktopAppContext.java:87)
     com.sun.portal.desktop.context.PSDesktopContextFactory.initDesktopAppContext(PSDesktopContextFactory.java:141)
     com.sun.portal.desktop.context.PSDesktopContextFactory.init(PSDesktopContextFactory.java:105)
     com.sun.portal.desktop.context.PSDesktopContextFactoryManager.getFactory(PSDesktopContextFactoryManager.java:21)
     com.sun.portal.desktop.DesktopServlet.getDesktopContextFactory(DesktopServlet.java:190)
     com.sun.portal.desktop.DesktopServlet.init(DesktopServlet.java:232)
     sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:118)
     com.sun.enterprise.web.connector.httpservice.HttpServiceProcessor.process(HttpServiceProcessor.java:226)
     com.sun.enterprise.web.HttpServiceWebContainer.service(HttpServiceWebContainer.java:2071)
If anyone have got idea about this problem then please let me know.All suggestions are welcome .
Thanx and Regards,
Chirag.

I meet the same problem.After I configured the Im and restart it,the error had happened.

CUA for ABAP and JAVA Systems

i have a AS-ABAP System and AS-JAVA system.
Can i have a single CUA for AS-ABAP system and aS-JAVA system or i should have seperate CUA for ABAP and JAVA

Hello Balaji,
Yes, you can connect the JAVA user adminsitration with the Single CUA.
Make use of the JAVA UME feature for this.
http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/content.htm
Regards,
Ammey Kesarkar

After upgrading to Firefox 11.0, clicks that link to a file do not report in the history and do not show up as visited.

Installed Beta 12.0 to no resolution. This same issue is happening on my other computer running 11.0. Checked in MS Explorer and links work normally.
Here's an example link:
file:///Z:/shared_cvo_docs/cust_inventory.xlsx
This link opens a excel spreadsheet file from my system. I have many of these types of links and I find it very helpful when I use the browser to open these as I can see which ones I've already opened. Without the links changing color, this becomes very difficult.
Running Win 7 Ultimate
Thanks for your help!

My history shows local .html files displayed in the browser, but not local files handed off to an external program. Is that the pattern you see as well?
No idea whether this was an intentional change (I don't see it on the Firefox 11 change list: [http://www.mozilla.org/en-US/firefox/11.0/releasenotes/buglist.html].)

FaceTime will not allow me to enter and the system does not recognize the password for my apple ID

gent.mo apple, I can not access with my Apple ID to open FaceTime regularly purchased with the new Lion OSX 10.7 (11A511) from the App Store. I get: "The server encountered an error while processing your registration. Try again later." Using Imac 24 n series VM816D010N4 purchased from the Apple Store Roma Est and waiting for your reply Yours faithfully
Luigi Diamanti

For the home WI-FI network. I need to unlock it so I can use the internet on the phone off the broadband network. I was in my friends house and when I connected to her WI-FI it asked for a password to allow me to run my phone off their broadband. When I selected their network it asked for as password which i entered and unlocked it. This is not happening for me on mine home broadband ??

EWA does not report security notes missing and java systems

Similar Messages

Maybe you are looking for