EWA for Java Version 7.0

Hi,
We are doing system monitoring for our ABAP & Java systems.
As part of this, we were able to get EWA for all ABAP Systems, But the same is not working in JAVA.
Is that possible to generate or configure EWA for Java Systems with version 7.0
Please Advise. .
Thanks
Arun

Hi Arun,
Please note that the requirements for EWA for ABAP and JAVA systems are very different.
To generate EWA reports for JAVA systems you have to install solution manager diagnostics.
Please take a look at the notes below:
976054 Availability of EWA for Non ABAP components
1010428 End-to-End Diagnostics
1274287 End-to-End Diagnostics SP18(EHP1)- SP19 - SP20 - SP21 - SP22
If you have already done that, please check the troubleshootings guide attached to note 1332428 and the troubleshooting for workload analysis in service.sap.com/diagnostics -> Media Library.
Hope this can help.

Similar Messages

XML Parser for Java version 2.0.2.9

I can no longer find the XML parser for Java (version 2.0.2.9) for Sun Solaris and Oracle version 8.1.7.3. This would be the file xmlparserv2.jar for parser version 2.0.2.9
This file support the latest Oracle Applications work flow version and so is necessary but does not seem to be available. All notes on Metalink point to Techweb.
Thanks for your help. -Erik Stromholt

This is covered by patch for bug 2199206. Thanks

EWA for Java system / portal

Hi,
We have configured EWA for ABAP systems, help required to configure EWA for Java / portal systems
Ours is solman EHP1 - support pack level 6
Regards

Hello,
For Java systems you need to perform a managed system setup, then schedule in solman_ewa_admin.
Regards,
Paul

EWA for Java

Hi
I have setup the EWA for ABAP and now I want to setup for Java stack systems like portal and other NW systems. I have installed Wily Introscope 7.2 and now I am looking at the Root cause analysis setup guide where it says to "Activate the BI source system" - Could someone tells me why do I need to do this. Is it something to do with BI systems that we have in our landscape?
Another question is - What is the difference between the SMD agents and Introscope agents and CCMS agents?
Or could someone point me to a simple guide to setup the EWA for Java?
Thanks

where it says to "Activate the BI source system" - Could someone tells me why do I need to do this. Is it something to do with BI systems that we have in our landscape?
No.
The performance data collected through the introscope agent must be stored somewhere. SMD uses the introscope agent to collect the data. The data is not stored in flat tables but in BI cubes. This is why you need to install the BI content on the Solution Manager system. The SMD setup then activates the BI content in the SolMan. So basically BI technology is used to generate the EWAs for Java systems.
You can, however, use an existing BI system instead to store the performance data, if you have the appropriate BI_CONT patchlevel installed. Actually there are some drawbacks, it´s not yet fully automated, manual tasks have to be done to make this work.
Another question is - What is the difference between the SMD agents and Introscope agents and CCMS agents?
The SMD agent provide a "basic connection" between the SolMan and the Java system, the Wily Introscope agents instrument the functions/methods/classes and collects performance data. The CCMS agents are on a "higher layer", they can check e. g. that a specific application (e. g. the portal) is running but they can´t find out, how long a specific java method takes to be executed.
Or could someone point me to a simple guide to setup the EWA for Java?
There is no "simpler guide" for that.
Setting up EWA for Java a challenging and complex task. For us we decided that it´s not worth it because there are too many manual things to be done (profile changes which are overwritten each time you implement an SP (flightrecorder), incompatibilities of autoprobe connectors for Wily (on Linux), manual tasks need tobe done if you use an external BI system and others).
Good luck!
Markus

EWA for Java only systems

Hi,
I'm searching for a guide to set up EWAs for Java only instances. Currently I have my Java instances in SMSY as system components, but how do I set up the EWAs as only ABAP instances are selectable. I'm using the latest SP, so this functionality should be available finally. I can't find a document about that anywhere, just some very bad documented snippets in SPRO...
Regards,
Pascal

Hi Pascal,
EWA for Java systems is currently in a pilot phase. It will be released with the note 976054, which is currently still being processed internally.
Note 976054 contains a setup instruction for EWA for non-ABAP-components.
Technically, for pure Java systems the "Central SDCCN" of the Solution Manager is used as indeed pure Java systems do not have a SDCCN.
Double stack installations do not make use of the Central SDCCN, using their local SDCCN to obtain the non-ABAP data that is collected by the Diagnostics part of the Solution Manager.
The note will be released in the very near future.
Best regards,
Walter Heibey

ANN: XML Parser for Java Version 2.0.2.4

Oracle announces the release of version 2.0.2.4 of the XML
Parser for Java now available for free download on the Oracle
Technology Network. This version features an integrated XSLT
Processor that is compliant with the recently released W3C XSLT
1.0 Proposed Recommendation.
This parser includes the following new features from previous
versions:
* XSLT Extension Function support is now available
* XSL Output has been enhanced to provide support for PrintWriter
and OutputStream for XML Documents and Doc Fragments.
This is the fourth maintenance release of v2 and includes a
number of bug fixes. See the included readme.html for details.
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

This is covered by patch for bug 2199206. Thanks

Installation Error 1335 for java version 1.5 and 1.4 which i have tried

i tried to install the latest java ie 1.5.0_04 or matter of fact other java versions also but the Installation of java is stopped by the Error code : 1335. following up with the Internal Error code : 2350.
My system configuration is PIV 2.4 Ghz HT enabled. Intel 865GBF motherboard. 512Mb DDR ram. The problem is coming in the Data1.Cab.
I even tried online installation. Eventually J2RE latest edition has installed from Java.com update. But the JDK 1.5 has the same problem even while downloading it from the Server online.
Plz help me out in installing java in my computer. Its urgent for my project work.
Email:[email protected]

first of all do not post twice. you want help in this forum, one post is enoough. Two post doesnt help you at all.
If you have problem installing java in your computer, try to search it on the net yourself first or look around the sun website.
I'm not exactly sure where your problem is. I tried installing java 1.5.0 but i had few problems so im still using 1.4.2 version. if you are in a hurry try installing 1.4.2 and see whether you can install or not

Installation Error 1350 for java version 1.5 and 1.4 which i have tried

i tried to install the latest java ie 1.5.0_04 or matter of fact other java versions also but the Installation of java is stopped by the Error code : 1335. following up with the Internal Error code : 2350.
My system configuration is PIV 2.4 Ghz HT enabled. Intel 865GBF motherboard. 512Mb DDR ram. The problem is coming in the Data1.Cab.
I even tried online installation. Eventually J2RE latest edition has installed from Java.com update. But the JDK 1.5 has the same problem even while downloading it from the Server online.
Plz help me out in installing java in my computer. Its urgent for my project work.
Email:[email protected]

I also had problems when trying to install 1.5.0. I must have downloaded the offline installation file at least a dozen times and always got the 1335 error. I tried just about all the "recommended solutions", but none of them worked for me. I downloaded the file through WellGet, Firefox, and Internet Explorer. The installation file downloaded through WellGet and Firefox had identical results (error at the same point in the installation "timeline", but the file downloaded through Internet Explorer errored at bit later, which seemed weird, but I guess different software runs differently (obviously!)...
During my lunchbreak at work, I downloaded the offline installation file (through Internet Explorer--my only option at work) and tried to install it when I got home. At first it seemed like it was going to work, as it didn't immediately pop up and say the Data1.cab was corrupted. However, at the end of the installation, I got a 1722 error, so I was disappointed.
Then I decided to try something that people always recommend, but I never do--disabling everything possible when installing something. I rebooted, disabled everything I could in my Systray (anything that had an Exit option in the menu--I didn't go wild and stop everything in Task Manager though...), and lo and behold, the installation went through the SDK, started installing the JRE, and I held my breath, hoping I didn't get a 1722 at the end. No 1722. It finally installed! Yay!
My theory is that either my firewall, anti-virus, or anti-spyware programs were messing up the downloading of the installation file. My workplace only has anti-virus and a hardware firewall. The fact that one download had a 1335 error and the other did not supports this theory. Or that maybe the file got corrupted by chance, but what are the odds I'd get a dozen corrupts in a dozen attempts? If one blames the source file at Sun as being corrupt, then no one would ever be able to install 1.5...
Another strong theory is that I needed to shut off all programs before installing. I'm not going to risk uninstalling my good install to test out that theory on my "corrupted" installation file, though... This could explain a dozen corrupts in a dozen attempts. If so, the file is not corrupt, but something is amiss in the OS environment.
It's feasible that someone could be stuck in a rut trying to download the same file through the same "pipeline" (firewall, anti-virus, anti-spyware) or stubbornly trying to bulldoze through an installation with their RAM chock full of unnecessary programs. It's too easy to just say "their" file is corrupt or Windows Installer is busted--I too was thinking along those lines...
Anyway, if you consistently get a 1335 error (or maybe other kinds of errors), try shutting down all non-essential programs in the Systray (and maybe in the Startup and Task Manager--although that wasn't necessary for me). If that doesn't work, download the installation file from another computer/source or get ahold of an installation file that has proven to work. These two options are possibly the easiest to try. If they don't work, then one'd have resort to the more esoteric fix-its...
On a side note, it was a bit scary having to shut off my firewall and anti-virus... I hope nothing got through in the two minutes they were down--I should have turned off my DSL modem...oh well.
Now, I have to test out my 1.5 install to see if it is really okay. If it's not, I'll post back and complain...haha

SAP Recommendation for JAVA Version and BW 7.40 HANA.

Dear All,
give it right now some official recommendations for the JAVA Version if we migrate BW 7.01 to HANA 7.4.
Regards
Werner Schubert

Hi Werner Schubert,
Apart from what Michael has suggested, please see if the following link gives you some help.
http://scn.sap.com/thread/3476708
BR
Prabhith

EWA for java only systems - how to get ewa at the end

Hi gurus,
I have a solma system in which all smd agent setup for portal was done and also all tasks (to collect data for EWA) are running well for ep systems aswel.
We are at sps 17 in solman.
I need to generated EWA for this portal system.I have no idea of how to generate it at the end.and i need that report routed to my mail.Some one please let me know how to generate EWA(after setup of every thing) and how to route it to mail address.
Thank you.

Hi ,
Thanks for few inputs
I have my EP system in system components in java (sub). and also in systems->netweaver->I have cinfigured my EP.But after this also I am unable to schedule it in DSWP.Can any one of you give some thoughts.(Seems I am missing some thing here - can any one let me know the procedure here to cross verify)
Rohit,I followed that user guide with out missing a single point!.But still I am unable to pull my report..
Tried manually with xml file(generated for EP from SM) and given it in DSM but it is saying no data available.
Seems nothing is coming from my EP.
Below are few exceptions in xml file.
1) introscope data is missing
Cannot find agent name Business-Sandbox_SEP_server0 for
instance[IInstance: key=1178028371063144, type=[Server],
nodeId=13865850, creation=Tue May 01 09:05:01 CDT 2007]
for thie exception - not sure why my SM is not resolving EP's sid.
Please not - SMD is running fine in EP
Any thoughts?
2) PAR data is missing
ORA-12505, TNS:listener does not currently know of SID given in connec descriptor
The Connection descriptor used by the client was:
Thank you.

EWA for Java /Portal

Hi
I have several instances PI /XI ,ECC ...
I have configured the ABAP System in Solution Manager but I want to know to configure tha java side & portal in Solution Manager because for the ABAP System we have to create RFC connection in solution manager and the satellite systems
How configure Early Watch for Java?
Regards
B VA

You can use SAP Note 976054.

Swing Tutorial for Java version 1.4.2

Hi all, where the subject can be found?
Current tutorial for Swing that is present on site http://java.sun.com/docs/books/tutorial/uiswing/
is for Java 6 only.
I am particularly interested in filtering JTable.
Thanks in advance.

Here is a link to the 1.5 tutorial which I believe is the same as the 1.4.2 tutorial:
https://www.cs.auckland.ac.nz/references/java/java1.5/tutorial/uiswing/TOC.html

I'm looking for Java version j2sdk-1_4_2_16-windows-amd64

Hello everyone.
I need Java version j2sdk-1_4_2_16-windows-amd64
On SUN site are only versions j2sdk-1_4_2_13-windows-amd64 and j2sdk-1_4_2_17-windows-amd64.
Could enyone has this version?
Thank you.

hi,
it was very hard to find and you have to register at the sun website (should be free).
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=j2sdk-1.4.2_16-amd64-JPR@CDS-CDS_Developer
PS: I don´t know why the link is crossed out. Should work anyway.
I hope i could help.
regards
Tobias

How to check for java version in unix?

hi,can anyone tell me how to find the java versionin AIX unix?

In addition to Annie's answer: if you mean to get it in your code, then do this:
String version = System.getProperty("java.version");
System.out.println("Java version: "+version);

Generating EWA for JAVA

Hello,
I need to generate an EWA report for a JAVA stack.
I have an ABAP + JAVA system for which I've configured SMD.
The SETUP (Diagnostic Setup-->Managed Sytems) has been executed successfully.
In SMSY I've created a JAVA component for the system.
The ABAP EWA runs fine.
However, no JAVA report in generated in DSWP.
Will the report be generated seperately for the 2 stacks in DSWP?
Also, when I try to manually generate it in the Trubleshooting tab on the SMD webpage,
I just get an XML page.
Pls. help.
Thanks,
Have a nice weekend,
Saba.

#976054
2.2     Data Retrieval (Java)
Technically, the Java part of the Data Retrieval process is transparent to the user and typically requires no further configuration. However, it does offer a direct interface to access the data retrieved for the EWA, bypassing the ABAP Data Retrieval infrastructure. In particular, it can be accessed by the Service Cockpit of the SMD directly for maintenance and error detection.
2.2.1     The Service Cockpit
The Service Cockpit can be reached under the following URL: http://<SMD Host>:<SMD Port>/smd/services. Its role is to provide a graphical UI to the Data Provider.
2.2.3     Configuration
All services, for which the data provider can retrieve data, are configured centrally through a configuration XML. The section u201CConfigurationu201D allows you to display this XML, download it for editing and upload a newer version if required.
2.2.4     Service Download
The actual retrieval of the data for the selected service (e.g. the EWA) can be triggered manually in section u201CService Downloadu201D. This will trigger the same processes as the external call from the ABAP side through the CSDCCN. The purpose of this functionality is to quickly allow access the data collected for the EWA and other services even without the ABAP data retrieval infrastructure.
Selecting the button u201CStart Serviceu201D will trigger the data retrieval of all relevant data for the selected service and the selected system.

EWA for Java Version 7.0

Similar Messages

Maybe you are looking for