EWA for non-productive Systems

Hi all,
is there a possibility to get Early Watch Alerts for Systems in a Solution, which are not marked as productive.
I don't want to create many solutions.
The same problem i have with the monitoring, I only see the productive in the monitoring overview.
Regards
Tobias

>
Schlosser Tobias wrote:
> I have added Systems to the Solution XY. The Leading Role of this solution is "productive Systems"
>
> I have add System PR1 (Productive) and System DE1 (Development). But I can only see the EWA for the Productive.
> If I want to see the EWA for the Development I have to delete the log. components and switch the leading role to "Development Systems".
>
> That's very inconvenient.
>
> I wan't one Solution with all my Systems, and EWAs for every System in it. Is this possible?
Yes, it's possible to have all systems (Prod, Dev, QA, ...) within one solution and to have EWA activated.
You need to choose "Put in Solution" from the context menu. See screen shots attached.
Regards,
Ruediger

Similar Messages

EWA for non-ABAP systems

Hi,
We are planing to implement EWA for Java systems. Currently EWA is active for all ABAP systems. Do we need Wily Introscope in order to setup the EWA for non-ABAP systems? Or just we can use the SMD to generate EWA reports for Java systems?
Any idea?
Thanks,
Kris

Thanks Paul
We are on SM 7.0 EhP1. But I see following info in note 976054. It says data sources for EWA are different on 7.0 EhP1, does it mean we don't need wily from 7.0 EhP1 onwards?
Data sources in Solution Manager Diagnostics up to SP17 used for EWA for non-ABAP components analysis are:
                      - Introscope (SAP Note 797147),
                      - Garbage Collection (SAP Note 1079125) and
                      - Portal Activity Reporting (SAP Notes 936612 to know how to activate PAR and 914791, 1075276 to configure SQL
                        Command Console).
Starting with Solution Manager 7.0 EHP1 (SP18) the data sources are:
                      - Solution Manager BI for performance data
                      - Configuration and Change DB(CCDB) for configuration data
Thanks,
Kris

How to setup EWA for non-ABAP system with SM 4.0 ?

Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
Thanks.

Hi Andrew,
we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
This is the old, available standard solution. At the moment we develop it also for java stand alone.
I think it will be available with the new ST-SER in autumn
Regards,
uDo

Configuring EWA for non Abap System

Hello to everybody.
I am configuring EWA in Portal System 7.01and SOLMAN 7.01 too. It's a new installation and i have a question:
- Which is the order to start to configure SMD?
- Is Necessary configure the CCMSR agent?
I configured EWA in a old system that had installed the agents, but they could not to connect to SMD Server.
I Fixed this problem, but now I need configure the SMD since start.
By the way, I'm new configuring EWA for Java
Thanks.
Esteban G.-
Edited by: Esteban Gutierrez E. on Jan 11, 2010 8:48 PM

Hi Sailesh
Here is related blog fr your issue. Hope this will help you.
setup EWA for portal
Thanks
Jignesh

SAP_ALL in non-productive systems

Hello SAP Security Administrators,
I have been searching (without success) for documentation or posts for a SAP security best practice for who should or should not have the profile SAP_ALL in a non-productive system. Is this typically left up to the individual company security policies? Is it a given that Basis will have SAP_ALL for administrative support? Are Security Admins allowed to have elevated privs in a non-productive system for research and troubleshooting?
We are trying to establish a standard for non-productive systems, so any input would be greatly appreciated!
Regards,
Janice

I do not think there are real standards. Personally I consider using SAP_ALL a sign of utter lazyness because there is never a person who needs to access all functionallity in an ERP system.
The only valid occasions I know to use SAP_ALL is during upgrades but even then it's not a guarantee against surprises.
You are talking about non productive systems but that does not exclude systems with production data, something to consider.
Some thoughts:
Do you want people to influence developments and/or transports if that is not their task?
Do you want pepole to see sensitive testdata just copied from production?
Do you really think your system/landscape configuration will be safe if you have to rely on agreements? Transport routes for instance?
SAP_ALL is something I only allow in sandbox systems and only if they're being backupped at least weekly. That is to avoid heavy discussions when people destroy each others work by curiously hitting buttons and 'trying' transactions.
I am sure some others will have a few suggestions to add

EWA report for non-abap systems

Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
Virgilio

Hi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram

Technical Monitoring one template used for production and non-production system.

Dear All,
Is there a way to have one template in Solman Technical Monitoring for production system and non-production system with different alerts ? For example if it exceeds a threshold for production system it will trigger red alert or set automatically an incident and if it's non prod system it will go to yellow warning alert ?
Regards
Lukasz Goral

Hi Likasz,
You first create and customize the template, and then assign to a system.
If it was selecting a system and then customizing a template, then may be such functionality makes sense.
So, I don't think that is possible.
Better would be copy the template used for production to non-production and make the adjustment to it.
Regards,
Divyanshu

EWA for NON-ABAP

Hi,
I configured SMD in solman, installed SMD & IA agents in Java systems(portals). But not able to generate report.
EWA setup was already done, i installed the agents recently. Even downloaded the service xml from solman SMD and tried to generate report manually, but not able to generate it.
In SDCCN the session log shows as follows.
         07/07/2008     04:53:59     Transfer of session data completed to destination NONE
         07/07/2008     04:53:59      > transfer completed
         07/07/2008     04:53:59      > transfer for server XXXXX completed
         07/07/2008     04:53:58     > transferring 000005 functions, 0000204676 bytes, RFC block size = 0000320000 for server bs1pa01z
         07/07/2008     04:53:58      > transfer for server XXXX started
         07/07/2008     04:53:58      > transfer data to mapped session ID 0000003416 100 destination NONE
         07/07/2008     04:53:58     Transfer of session data started to destination NONE
         07/07/2008     04:53:58     Data collection completed for session 1000000003416 EWALERT SolMan
         07/07/2008     04:52:45     Collection is for non-ABAP system <SID> 0020224025
         07/07/2008     04:52:45     Data collection started for session 1000000003416 EWALERT SolMan (non-ABAP)
         07/07/2008     04:52:45      > New data collection triggered using reference session TSKR000001012
         07/07/2008     04:52:45     Session download data requested using task 0000001887 by BATCHBASIS
Please guide..
On solman 4.0 SPS 15, ST-SER 700_2007_1 PATCH 1
Edited by: Kobby bryant on Jul 8, 2008 2:59 PM
Edited by: Kobby bryant on Jul 8, 2008 3:36 PM
Edited by: Kobby bryant on Jul 8, 2008 10:48 PM
Edited by: Kobby bryant on Jul 9, 2008 2:26 PM

Hello.
First of all, you must ensure that your solution manger has, at least, stack 13 of support package, in java and ABAP side.
Once you hace installed your agents in solution manager, you must to do different things in your satellite system.
- First of all, you must get sure that you have deployed LMSERVICE in your satellite system. And you must deploy -     JmxService7.1.P5NetWeaver.ear file.
- Secondly, you must install wily folder in /usr/sap/ccm . Willy folder is obtained in ISAGENT71_11-20002182.SAR file.
Into Wily folder, you must look for sap_IntroscopeAgent.profile file, and you need to modify it in order to be seen for your solution manager. To do this step, only find in this file the next item:
introscope.agent.enterprisemanager.transport.tcp.host.DEFAULT=
It will have value 'localhost' and you must delete 'default' and insert your solution manager host.
- Then, you must go to the next folder opening cmd:
\usr\sap\ccms\willy\connectors
There, execute the next command in order to create the necessary connector:
java -jar CreateAutoProbeConnector.jar -jvm C:\j                2sdk1.4.2_06 -output connector.jar
Get sure tou put your corresponding JDK
- You must install SMD agent in your satellite host, executing sapinst that is in CDSMDTOOLS21_0-10003537.SAR file.
- Once your agent is running go to \usr\sap\SMD\J98\component_analyzer and execute the command 'gather setup' . It will open to you a new window with some warnings. Double clicking in each warning and editing node, you can insert a value in order to correct these warnings.
- Then, you must insert different java parameters in your config tool. Parameters are the next:
-Xbootclasspath/p:K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/connectors/AutoProbeConnector.jar;K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/Agent.jar
-Dcom.wily.introscope.agent.agentName=<name of the agent : insert what you want>
-Dcom.wily.introscope.agentProfile=K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/sap_IntroscopeAgent.profile
-XX:+PrintClassHistogram
-XX:+HeapDumpOnCtrlBreak
- When you have done this, you must configure your system in SMSY following SAP guides and create the solution in solution_manager transaction.
- The next step is configure the system in SMD web:
1.- execute SMD upgrade.
2.- Setup diagnostics system
3.- Setup managed system
4.- in 'Trouble shooting' insert jdbc parameters
5.- In 'Introscope agent' you must load the parameters you configured in configtool.
6.- At this point will be necessary to restart your satellite system.
When you finishes all these steps you will be able to obtain EWA for java side.
Is so difficult to do this. We have done it in several environments and we have had lots of problems, but it's possible.
Any doubt, please, give me your mail and I'll be so glad to help you.
Best regards.

EWA on Non-ABAP System with Solution Manager EHP 1

Hi Experts,
We have recently updated our solution manager from SP Stack 16 to EHP1 (sp 18). we are now planning to set up EWA for non-abap components (EP 7.0). however, the only SAP note that i have been able to find is "976054 - Availability of EWA for Non ABAP components" but this is only limited up to SP 17. I have not been able to find any guides relating to EWA thru Solution Manager EHP1.
I would greatly appreciate if anyone can refer any documents or SAP notes that would enable setting up EWA for non-abap components thru Solution Manager EHP1.
We have also gone through the note 1332428, but we have'nt found it useful. We are still struggling to generate EWA report on Non-ABAP system.
Looking forward to your kind help.
Thanks and Regards,
Sarthak Syal

Hi Sarthak,
Good!!
Please do the following:
1) include the system in the Solution and scheduled the EWA session.Logical component should refer to the Non-ABAP System with no ABAP instance as relevant under the SID definition in SMSY-systems.
2) Is the Non -ABAP ( assuming its java) has the Software component defined and is mentioned as relevant under the SID with the component name and type.
3) Having said that SMD - Root cause Analysis functionality is configured-> check whether you are getting the Details for the Non-ABAP systems in the analysis Tabs of Root Cause Analysis.
This should be good to go. Wait for the session to get completed.
Thanks,
Jagan

Chart of account conversion SLO tool,method for a Production system

Hi All
We have a requirement like we want to use Chart of account conversion tool for a production system where transactional data are present.
We have used this COA conversion tool for best practice solution not in a production system.
we want to know the difference between these two methods like production and non production system.
Provide me some process document on the SLO service tool for the same
Mrinal dey
9836265158

Hi Mrinal
I'm wondering the same? How to go on in productive system after to use the conversion toll?
How did you manage?
Regards
Angels

How can generated EWA for SAP Portal system

Hi Guru there,
Usually generate EWA should maintenan RFC, We have SAP Portal systems ( prod PP1 and test PT1 and dev PD1), but they are not appeared at saplogon and no general SAP interface, only operationing system level we can start/stop SAP system and database and from the operating system browser can see the portal work normal ( 50000 port) or not.
How can I generate EWA from solman?
waiting for your kind reply!
best regards,
WEI

Hi Wei,
Do you already know SAP Note <a href="http://www.service.sap.com/sap/support/notes/976054">976054</a>?
This SAP Note describes the setup of EWA for NON-ABAP Components.
Please see the description and the attachments.
Best regards,
Ruediger

Setting client role in non-production systems

In our QA test systems of R/3 and BW, the client role in SCC4 was set to 'Production'. The reason I was given is that by setting the client role to 'Production', will enable some settings in FI such as period closing,and customizing settings remain open without transportable requests. I totally disagree with this. I worked on numerous projects, but this is first time I am hearing this. I always set client role to Test in non-production systems, without any problems. Do any one have any idea about this?
Thanks
Santosh

SAP have a concept of "current settings". These include things like exchange rates and other items which really appear to be configuration settings. In a non-modifiable system these cannot be changed because the transport management system tries to get involved. If the client is set to productive, this restriction is overridden.
I would always suggest that the QA system should be set to productive and non-modifiable to ensure that the behaviour of the transactions affecting such objects can be tested in a production-like environment. If you need to have your QA system open for any sort of changes you are exposed to having changes introduced in QA to leading to the impression that new/modified functionality or config works but when the transport takes the unmodified version to production you'll be in trouble.

Configuration Managment Pack for Non Oracle Systems (new)

Hi ,
There is a pack called "Configuration Management" for the database. This pack manage hardware , software , updates, patches, etc for host that have installed any Oracle Software.
Now, in EM Release 2 there is a new pack "Configuration Managment Pack for Non Oracle Systems" wich basically will allow me to the same but without the requirement to have any Oracle software installed.
The question is : Where can i find a white paper about it? i been looking around and there is only mentions of the product, but not extra info. I know is out already 3k p/processor..
Any ideas?
Sergio Benavides

Found this dated Oct 2005
(Note the "priced in Advance of Availability" piece)
Standalone Managers
Configuration Management Pack for Non-Oracle Systems (priced in Advance of Availability) 2.375 522,59 Per Processor -
Provisioning Pack (priced in Advance of Availability) 2.375 522,59 Per Processor -
Service Level Management Pack (priced in Advance of Availability) 79 17,42 Test -
(Must license with Beacon Plus Test pricing) 2.375 522,59 Beacon -
System Monitoring Plug-in for Hosts (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Databases (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Middleware (priced in Advance of Availability)
25 1.188 261,29 Per Processor -
System Monitoring Plug-in for Network Devices (priced in Advance of Availability)
26 1.188 261,29 Per Network Device -
System Monitoring Plug-in for Storage (priced in Advance of Availability)
27

EWA for Java only systems

Hi,
I'm searching for a guide to set up EWAs for Java only instances. Currently I have my Java instances in SMSY as system components, but how do I set up the EWAs as only ABAP instances are selectable. I'm using the latest SP, so this functionality should be available finally. I can't find a document about that anywhere, just some very bad documented snippets in SPRO...
Regards,
Pascal

Hi Pascal,
EWA for Java systems is currently in a pilot phase. It will be released with the note 976054, which is currently still being processed internally.
Note 976054 contains a setup instruction for EWA for non-ABAP-components.
Technically, for pure Java systems the "Central SDCCN" of the Solution Manager is used as indeed pure Java systems do not have a SDCCN.
Double stack installations do not make use of the Central SDCCN, using their local SDCCN to obtain the non-ABAP data that is collected by the Diagnostics part of the Solution Manager.
The note will be released in the very near future.
Best regards,
Walter Heibey

Data Mapping Templates for NON-RTA Systems

Hi all,
I'm designing n extractor for my NON-SAP System.
I've been reading the Appendix B: Data Mapping Templates for Non-RTA Systems from Configuration Guide - SAP GRC AC 5.3.
I have a couple of questions regarding the size of two fields in table ACTION PERMISSION OBJECTS TEMPLATE
Is correct the size that the documents says about fields:
ACTION (document says it's 20 but in other tables is 50)
PERMISSION (document says it's 10 but in other tables is 100
ACTVT (document says it's 10but in other tables is 50)
Thank you in advanced.

Hi Luis,
Yeah i will follow the recomendations but i'm updating some files to RAR and i've seen another kind of inconsistency such as in the table User File Template. Recomendation says that both FNAME field and LNAME field are 50 size each one but in my case i can update a FNAME 51 size and a LNAME 49, i mean between FNAME and LNAME it's 100 size.
Cheers.

EWA for non-productive Systems

Similar Messages

Maybe you are looking for