EWA for XI

Hi,
In our weekly EWA report for XI, sometimes we are missing the compleJava Performance Reports section, has someone faced this issue?
Thanks in advance.

checkout the attachment of SAP Note 976054, it contains a troubleshooting section

Similar Messages

EWA for Business Objects (XI 3.1) within SAP Solution Manager

Hello!
We use Business Objects (XI 3.1) and would like to get weekly a EWA report within our SAP Solution Manager.
Our SAP Solution Manger has only ABAP stack and it has the SPS version 25.
We also do not use Wily Introscope/Diagnostics and E2E tools within SAP Solution Manager.
Question
Is it possible to set up EWA for Business Objects with our requirements (SOLMAN with ABAP stack and without E2E/Diagnostics tools)?

Hello,
The short answer is no. You can verify this in SAP Note 1507629 - Preparing a BOE system for Service Sessions in Sol. Manager.
"...1.) Managed System Setup
Perform the Managed System Setup for SAP BusinessObjects Enterprise as
described in the "End-to-End Root Cause Analysis System Landscape Setup
Guide". This guide can be found in the SAP Service Market Place:
-> http://service.sap.com/diagnostics
-> Navigate to the "Media Library"
-> Open the document "SAP Solution Manager Landscape Setup Guide"
Please ensure that you perform all steps mentioned in the guide which
are relevant for your product and version. Please read also SAP note
1357901, which is also referred to in the above mentioned setup guide."
So this is a requirement. There are also pdf documetns attached to this note that describe how to setup the EWA in Solution Manager. EGI_SBOP_EWA_part1.pdf and EGI_SBOP_EWA_part2.pdf.
The fact you have no Java stack and have not installed Diagnostics, just means it has not been done. It can be done and then you can do a managed system setup, and the balance of tasks required to prepare the system and Solution manager to generate EWA reports for the BOE system. Its just more work, not a show stopper.
Regards,
Paul

EWA for NON-ABAP

Hi,
I configured SMD in solman, installed SMD & IA agents in Java systems(portals). But not able to generate report.
EWA setup was already done, i installed the agents recently. Even downloaded the service xml from solman SMD and tried to generate report manually, but not able to generate it.
In SDCCN the session log shows as follows.
         07/07/2008     04:53:59     Transfer of session data completed to destination NONE
         07/07/2008     04:53:59      > transfer completed
         07/07/2008     04:53:59      > transfer for server XXXXX completed
         07/07/2008     04:53:58     > transferring 000005 functions, 0000204676 bytes, RFC block size = 0000320000 for server bs1pa01z
         07/07/2008     04:53:58      > transfer for server XXXX started
         07/07/2008     04:53:58      > transfer data to mapped session ID 0000003416 100 destination NONE
         07/07/2008     04:53:58     Transfer of session data started to destination NONE
         07/07/2008     04:53:58     Data collection completed for session 1000000003416 EWALERT SolMan
         07/07/2008     04:52:45     Collection is for non-ABAP system <SID> 0020224025
         07/07/2008     04:52:45     Data collection started for session 1000000003416 EWALERT SolMan (non-ABAP)
         07/07/2008     04:52:45      > New data collection triggered using reference session TSKR000001012
         07/07/2008     04:52:45     Session download data requested using task 0000001887 by BATCHBASIS
Please guide..
On solman 4.0 SPS 15, ST-SER 700_2007_1 PATCH 1
Edited by: Kobby bryant on Jul 8, 2008 2:59 PM
Edited by: Kobby bryant on Jul 8, 2008 3:36 PM
Edited by: Kobby bryant on Jul 8, 2008 10:48 PM
Edited by: Kobby bryant on Jul 9, 2008 2:26 PM

Hello.
First of all, you must ensure that your solution manger has, at least, stack 13 of support package, in java and ABAP side.
Once you hace installed your agents in solution manager, you must to do different things in your satellite system.
- First of all, you must get sure that you have deployed LMSERVICE in your satellite system. And you must deploy -     JmxService7.1.P5NetWeaver.ear file.
- Secondly, you must install wily folder in /usr/sap/ccm . Willy folder is obtained in ISAGENT71_11-20002182.SAR file.
Into Wily folder, you must look for sap_IntroscopeAgent.profile file, and you need to modify it in order to be seen for your solution manager. To do this step, only find in this file the next item:
introscope.agent.enterprisemanager.transport.tcp.host.DEFAULT=
It will have value 'localhost' and you must delete 'default' and insert your solution manager host.
- Then, you must go to the next folder opening cmd:
\usr\sap\ccms\willy\connectors
There, execute the next command in order to create the necessary connector:
java -jar CreateAutoProbeConnector.jar -jvm C:\j                2sdk1.4.2_06 -output connector.jar
Get sure tou put your corresponding JDK
- You must install SMD agent in your satellite host, executing sapinst that is in CDSMDTOOLS21_0-10003537.SAR file.
- Once your agent is running go to \usr\sap\SMD\J98\component_analyzer and execute the command 'gather setup' . It will open to you a new window with some warnings. Double clicking in each warning and editing node, you can insert a value in order to correct these warnings.
- Then, you must insert different java parameters in your config tool. Parameters are the next:
-Xbootclasspath/p:K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/connectors/AutoProbeConnector.jar;K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/Agent.jar
-Dcom.wily.introscope.agent.agentName=<name of the agent : insert what you want>
-Dcom.wily.introscope.agentProfile=K:/usr/sap/SMD/J98/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.7.1.P11-2007-09-27/wily/sap_IntroscopeAgent.profile
-XX:+PrintClassHistogram
-XX:+HeapDumpOnCtrlBreak
- When you have done this, you must configure your system in SMSY following SAP guides and create the solution in solution_manager transaction.
- The next step is configure the system in SMD web:
1.- execute SMD upgrade.
2.- Setup diagnostics system
3.- Setup managed system
4.- in 'Trouble shooting' insert jdbc parameters
5.- In 'Introscope agent' you must load the parameters you configured in configtool.
6.- At this point will be necessary to restart your satellite system.
When you finishes all these steps you will be able to obtain EWA for java side.
Is so difficult to do this. We have done it in several environments and we have had lots of problems, but it's possible.
Any doubt, please, give me your mail and I'll be so glad to help you.
Best regards.

EWA for non-abap not triggering with SDCCN session

Hi
I can manually download the session and generate EWA for java stack but its not automatically generated with SDCCN report. Its a double stack system, i am getting EWA for abap stack but not for java stack. Guide on note 976054 do not clearly mention what to do.
Any suggestion

I JUST got this working after months of End-to-End Diagnostics Setup ...
You've run the SMD wizard to set up the managing system?
You've deployed smdagents everywhere you have a non-abap system? Use the SR3 install .. lets you register from SLD ... works when ping of your soulution manager host hasn't a chance.
You've deployed the wily agent? Use the absolute latest hostagent 7.2.3 or use the binary agent
You're running Wily Enterprise manager outside of sap
You've run the SMD wizard to set-up you non-abap systems
You've doubled the size of the host that runs SM/SMD 7.0
You've run the Diagnostics Admin > Diagnostics system > self check and got the reds down to an absolute minimum?
If the SMD wizard for the managing system had problems creating the WEBADMIN RFC,
there is an IMG activity (Solution Manager > Configuration > Basic Settings > Earlywatch Alert > Early Watch Alert for non-abap > Check RFC connection) that says to copy RFC SOLMANDIAG as WEBADMIN. This works where the wizard didn't.
/Ken Chamberlain
University of Toronto

EWA for non-ABAP systems

Hi,
We are planing to implement EWA for Java systems. Currently EWA is active for all ABAP systems. Do we need Wily Introscope in order to setup the EWA for non-ABAP systems? Or just we can use the SMD to generate EWA reports for Java systems?
Any idea?
Thanks,
Kris

Thanks Paul
We are on SM 7.0 EhP1. But I see following info in note 976054. It says data sources for EWA are different on 7.0 EhP1, does it mean we don't need wily from 7.0 EhP1 onwards?
Data sources in Solution Manager Diagnostics up to SP17 used for EWA for non-ABAP components analysis are:
                      - Introscope (SAP Note 797147),
                      - Garbage Collection (SAP Note 1079125) and
                      - Portal Activity Reporting (SAP Notes 936612 to know how to activate PAR and 914791, 1075276 to configure SQL
                        Command Console).
Starting with Solution Manager 7.0 EHP1 (SP18) the data sources are:
                      - Solution Manager BI for performance data
                      - Configuration and Change DB(CCDB) for configuration data
Thanks,
Kris

How can generated EWA for SAP Portal system

Hi Guru there,
Usually generate EWA should maintenan RFC, We have SAP Portal systems ( prod PP1 and test PT1 and dev PD1), but they are not appeared at saplogon and no general SAP interface, only operationing system level we can start/stop SAP system and database and from the operating system browser can see the portal work normal ( 50000 port) or not.
How can I generate EWA from solman?
waiting for your kind reply!
best regards,
WEI

Hi Wei,
Do you already know SAP Note <a href="http://www.service.sap.com/sap/support/notes/976054">976054</a>?
This SAP Note describes the setup of EWA for NON-ABAP Components.
Please see the description and the attachments.
Best regards,
Ruediger

EWA for non-productive Systems

Hi all,
is there a possibility to get Early Watch Alerts for Systems in a Solution, which are not marked as productive.
I don't want to create many solutions.
The same problem i have with the monitoring, I only see the productive in the monitoring overview.
Regards
Tobias

>
Schlosser Tobias wrote:
> I have added Systems to the Solution XY. The Leading Role of this solution is "productive Systems"
>
> I have add System PR1 (Productive) and System DE1 (Development). But I can only see the EWA for the Productive.
> If I want to see the EWA for the Development I have to delete the log. components and switch the leading role to "Development Systems".
>
> That's very inconvenient.
>
> I wan't one Solution with all my Systems, and EWAs for every System in it. Is this possible?
Yes, it's possible to have all systems (Prod, Dev, QA, ...) within one solution and to have EWA activated.
You need to choose "Put in Solution" from the context menu. See screen shots attached.
Regards,
Ruediger

Configuring EWA for non Abap System

Hello to everybody.
I am configuring EWA in Portal System 7.01and SOLMAN 7.01 too. It's a new installation and i have a question:
- Which is the order to start to configure SMD?
- Is Necessary configure the CCMSR agent?
I configured EWA in a old system that had installed the agents, but they could not to connect to SMD Server.
I Fixed this problem, but now I need configure the SMD since start.
By the way, I'm new configuring EWA for Java
Thanks.
Esteban G.-
Edited by: Esteban Gutierrez E. on Jan 11, 2010 8:48 PM

Hi Sailesh
Here is related blog fr your issue. Hope this will help you.
setup EWA for portal
Thanks
Jignesh

EWA for Java system / portal

Hi,
We have configured EWA for ABAP systems, help required to configure EWA for Java / portal systems
Ours is solman EHP1 - support pack level 6
Regards

Hello,
For Java systems you need to perform a managed system setup, then schedule in solman_ewa_admin.
Regards,
Paul

EWA for Java

Hi
I have setup the EWA for ABAP and now I want to setup for Java stack systems like portal and other NW systems. I have installed Wily Introscope 7.2 and now I am looking at the Root cause analysis setup guide where it says to "Activate the BI source system" - Could someone tells me why do I need to do this. Is it something to do with BI systems that we have in our landscape?
Another question is - What is the difference between the SMD agents and Introscope agents and CCMS agents?
Or could someone point me to a simple guide to setup the EWA for Java?
Thanks

where it says to "Activate the BI source system" - Could someone tells me why do I need to do this. Is it something to do with BI systems that we have in our landscape?
No.
The performance data collected through the introscope agent must be stored somewhere. SMD uses the introscope agent to collect the data. The data is not stored in flat tables but in BI cubes. This is why you need to install the BI content on the Solution Manager system. The SMD setup then activates the BI content in the SolMan. So basically BI technology is used to generate the EWAs for Java systems.
You can, however, use an existing BI system instead to store the performance data, if you have the appropriate BI_CONT patchlevel installed. Actually there are some drawbacks, it´s not yet fully automated, manual tasks have to be done to make this work.
Another question is - What is the difference between the SMD agents and Introscope agents and CCMS agents?
The SMD agent provide a "basic connection" between the SolMan and the Java system, the Wily Introscope agents instrument the functions/methods/classes and collects performance data. The CCMS agents are on a "higher layer", they can check e. g. that a specific application (e. g. the portal) is running but they can´t find out, how long a specific java method takes to be executed.
Or could someone point me to a simple guide to setup the EWA for Java?
There is no "simpler guide" for that.
Setting up EWA for Java a challenging and complex task. For us we decided that it´s not worth it because there are too many manual things to be done (profile changes which are overwritten each time you implement an SP (flightrecorder), incompatibilities of autoprobe connectors for Wily (on Linux), manual tasks need tobe done if you use an external BI system and others).
Good luck!
Markus

EWA for Java Version 7.0

Hi,
We are doing system monitoring for our ABAP & Java systems.
As part of this, we were able to get EWA for all ABAP Systems, But the same is not working in JAVA.
Is that possible to generate or configure EWA for Java Systems with version 7.0
Please Advise. .
Thanks
Arun

Hi Arun,
Please note that the requirements for EWA for ABAP and JAVA systems are very different.
To generate EWA reports for JAVA systems you have to install solution manager diagnostics.
Please take a look at the notes below:
976054 Availability of EWA for Non ABAP components
1010428 End-to-End Diagnostics
1274287 End-to-End Diagnostics SP18(EHP1)- SP19 - SP20 - SP21 - SP22
If you have already done that, please check the troubleshootings guide attached to note 1332428 and the troubleshooting for workload analysis in service.sap.com/diagnostics -> Media Library.
Hope this can help.

EWA for Java only systems

Hi,
I'm searching for a guide to set up EWAs for Java only instances. Currently I have my Java instances in SMSY as system components, but how do I set up the EWAs as only ABAP instances are selectable. I'm using the latest SP, so this functionality should be available finally. I can't find a document about that anywhere, just some very bad documented snippets in SPRO...
Regards,
Pascal

Hi Pascal,
EWA for Java systems is currently in a pilot phase. It will be released with the note 976054, which is currently still being processed internally.
Note 976054 contains a setup instruction for EWA for non-ABAP-components.
Technically, for pure Java systems the "Central SDCCN" of the Solution Manager is used as indeed pure Java systems do not have a SDCCN.
Double stack installations do not make use of the Central SDCCN, using their local SDCCN to obtain the non-ABAP data that is collected by the Diagnostics part of the Solution Manager.
The note will be released in the very near future.
Best regards,
Walter Heibey

EWA for java only systems - how to get ewa at the end

Hi gurus,
I have a solma system in which all smd agent setup for portal was done and also all tasks (to collect data for EWA) are running well for ep systems aswel.
We are at sps 17 in solman.
I need to generated EWA for this portal system.I have no idea of how to generate it at the end.and i need that report routed to my mail.Some one please let me know how to generate EWA(after setup of every thing) and how to route it to mail address.
Thank you.

Hi ,
Thanks for few inputs
I have my EP system in system components in java (sub). and also in systems->netweaver->I have cinfigured my EP.But after this also I am unable to schedule it in DSWP.Can any one of you give some thoughts.(Seems I am missing some thing here - can any one let me know the procedure here to cross verify)
Rohit,I followed that user guide with out missing a single point!.But still I am unable to pull my report..
Tried manually with xml file(generated for EP from SM) and given it in DSM but it is saying no data available.
Seems nothing is coming from my EP.
Below are few exceptions in xml file.
1) introscope data is missing
Cannot find agent name Business-Sandbox_SEP_server0 for
instance[IInstance: key=1178028371063144, type=[Server],
nodeId=13865850, creation=Tue May 01 09:05:01 CDT 2007]
for thie exception - not sure why my SM is not resolving EP's sid.
Please not - SMD is running fine in EP
Any thoughts?
2) PAR data is missing
ORA-12505, TNS:listener does not currently know of SID given in connec descriptor
The Connection descriptor used by the client was:
Thank you.

Activate EWA for satellite system in 3.2

Hello,
We have solution manager 3.2 with all the latest patches, and have included the satellite system in the landscape and generated the RFC's. Need to activate EWA for the system. Have defined a Solution. Need to how do you include a system in the solution because when i click on Solution directory --> setup EWA, it gives a message,
"NO system found in landscape"
Any suggestions / inputs are appreciated.
Thanks and cheers,
Chetan

HI ,
Kindly follow the below steps for the EWA activation:
1)go to transaction SMSY enter your system details and check the system data is updating with the SLD (check this option in SMSY_SETUP)
2)then define logical component fo rthis system then define this logical component under solution
3)you will be having a option under that EWA configuration click on EWA active (check )
and check the Send to SAP if you want the EWA repor thas to reach SAP once the Report is Red after analysis done in Solman by the Job SMS*
4)then go to SDCCN in the solman then trigger the activation of session data for the particular sysytem if the RFC SM_SIDCLNT<CLNT>_back exists then task created in the satelite system for the session data to Solamn
5)then check the EWA report and do processing in the operation for that solution
Best Regards,
Srekantha Reddy.M

How to setup EWA for non-ABAP system with SM 4.0 ?

Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
Thanks.

Hi Andrew,
we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
This is the old, available standard solution. At the moment we develop it also for java stand alone.
I think it will be available with the new ST-SER in autumn
Regards,
uDo

EWA for XI

Similar Messages

Maybe you are looking for