EWA Generating for EHP4 Systems

Hi,
    I had generated EWA Reports successfully for ECC6.0,ECC5.0 Systems.
Now iam configuraing EWA Report for EHP4-SP04 sytems,i did all the settings in solution manager,when iam ruiing RTCCTOOL in satelite System iam getting below warning.Is this creating any problem to generate report.
Setup of the EarlyWatch Alert service
[ checks that min. 2 EWAlert sessions to SAP Solution Manager or to SAP
   are found in last 60 days, and that SDCC session manager job runs ]
We recommend that SAP Solution Manager be used to monitor your systems
via Earlywatch Alert. In this case you activate it just by including
a system into a Solution Landscape. See the note 1257308  . If this is
not possible, data for productive systems can be processed at SAP.
In SDCCN when iam creating maintenace package,refresh sessions after finishing successfully disappearing from screen,not generating any early watch alerts.Guide me for the same.
Thanku,

Okay. Hmmm...
Than I would query the EarlyWatch of the Satelite System over the Solman.
Logon to your Solman.
Navigate to the Solution in which the Satelite System was created.
Operations -> Solution Monitoring -> Early Watch Alert
Scroll down to the next Early Watch for your system in the future and click on it.
Change the Date of the Early Watch to the current day and time and run the suggested Job in the Solution Manager.
After the job is finished (control it via SM37), there should be a Early Watch Task in SDCCN of the Satelite System.
Best Regards
Tobias

Similar Messages

  • Grey (blank) EWA reports generated for Portal systems

    I am attempting to set up EWA reports for J2EE systems. At this stage despite all efforts I continue to get grey rated (blank) reports generated for our Portal systems.
    As far as I can tell all required components are installed correctly (Wily, SMD server, SMD agents etc).
    This problem seems to be restricted to our Portal systems as report data is being generated for our XI J2EE engines with the same SMD components installed.
    CGA collection jobs are running successfully against the managed Portal systems, and I have attempted to manually generate reports via transaction DSA in the Solution Manager system, using an uploaded service data xml file generated with the SMD/services utility. This also results in a blank report.
    Our systems comprise the following components:
    Wily v7.1
    SMD 13 on Solution Manager and managed systems
    Solution Manager 4.0 SP13: (ABAP):
    SAP_ABA     700     0013     SAPKA70013
    SAP_BASIS     700     0013     SAPKB70013
    ST-PI  2005_1_700     0006     SAPKITLQI6
    PI_BASIS 2005_1_700     0013     SAPKIPYJ7D
    SAP_BW     700     0015     SAPKW70015
    SAP_AP     700     0009     SAPKNA7009
    BBPCRM     500     0009     SAPKU50009
    CPRXRPM     400     0010     SAPK-40010INCPRXRPM
    ST     400     0013     SAPKITL423
    BI_CONT     703     0008     SAPKIBIIP8
    ST-A/PI     01K_CRM560     0000          -
    ST-ICO     150_700     0011     SAPK-1507BINSTPL
    ST-SER     700_2006_2     0004     SAPKITLOK4
    Solution Manager (J2EE):
    sap.com     SAP_JTECHF     7.00 SP13 (1000.7.00.13.0.20070812015644)
    sap.com     ISAGENT     7.00 SP13 (1000.7.00.14.0.20070927052333)
    sap.com     SAP-JEE     7.00 SP13 (1000.7.00.13.0.20070812015311)
    sap.com     SAP-JEECOR     7.00 SP13 (1000.7.00.13.0.20070907082334)
    sap.com     BASETABLES     7.00 SP13 (1000.7.00.13.0.20070812013638)
    sap.com     CORE-TOOLS     7.00 SP13 (1000.7.00.13.0.20070812014121)
    sap.com     JLOGVIEW     7.00 SP13 (1000.7.00.13.0.20070812001600)
    sap.com     JSPM     7.00 SP13 (1000.7.00.13.0.20070812001700)
    sap.com     CAF     7.00 SP13 (1000.7.00.13.0.20070809092315)
    sap.com     UMEADMIN     7.00 SP13 (1000.7.00.13.0.20070809093947)
    sap.com     ADSSAP     7.00 SP13 (1000.7.00.13.0.20070812011854)
    sap.com     BI_MMR     7.00 SP13 (1000.7.00.13.0.20070812013749)
    sap.com     CAF-UM     7.00 SP13 (1000.7.00.13.0.20070809092324)
    sap.com     KM-KW_JIKS     7.00 SP13 (1000.7.00.13.0.20070812014519)
    sap.com     SAP_JTECHS     7.00 SP13 (1000.7.00.13.0.20070812015951)
    sap.com     BI_UDI     7.00 SP13 (1000.7.00.13.0.20070811190400)
    sap.com     LM-SERVICE     7.00 SP13 (1000.7.00.13.0.20070812001200)
    sap.com     LM-TOOLS     7.00 SP13 (1000.7.00.13.0.20070906104634)
    Among many, many others, the following notes and documentation has been followed:
    976054 Availability of EWA for Non ABAP components
    1010428 End-to-End Diagnostics
    762969 - Grey rating for Earywatch Report
    EWA guide for NON-ABAB components
    SAP Solution Manager 4.0 End-to-End Root Cause Analysis Installation Guide
    762969 - Grey rating for Earywatch Report
    And of course all the Wily & SMD installation guides.
    Please let me know if there is any other information required. I'm posting this in the hopes that someone else has had this problem and has been able to resolve it. I have read though what seems like hundreds of threads on SMD setup problems, however not many that describe the problem I'm having exactly.
    Many thanks in advace.
    Tim

    Hi Stephan,
    You're on the right track! When I try manually generate reports for our XI systems via uploaded service data, I only get valid report data if I generate report with graphics - otherwise the report is blank.
    Alas with the Portal systems, I get no report data either way.
    The XML storage table does contain data (with XI & Portal systems) - so comms with the J2EE is working.
    Thanks for your help.
    Tim

  • Config in Sol Mgr 4.0 for EWA reports for NW2004s Systems??????????

    Dear Experts,
    We have installed Solution Manager 4.0 with latest Patch Level.
    We also have  BI 7.0 and ECC 6.0 Systems in Landscape.
    Requirement :
    I have to generate <b>Early Watch Reports</b> for the both BI & ECC systems in our Solution Manager.
    Please Let me know the configuration & steps for integration and to generate EWA's for the systems on a weekly BASIS.
    Blogs / Links / Guides are highly appreciated.
    Thanks in Advance to all SOlution Manager Experts.
    Regards
    PR

    hi,
    Please check these. It will solve your problem.
    https://websmp206.sap-ag.de/~sapidb/011000358700006819072005E
    https://websmp206.sap-ag.de/~sapidb/011000358700006936042005E.sim
    https://websmp206.sap-ag.de/~sapidb/011000358700005011442004E
    https://websmp206.sap-ag.de/~sapidb/011000358700008968942004E.sim
    https://websmp206.sap-ag.de/~sapidb/011000358700001581372005E.sim
    /people/federico.babelis2/blog/2006/04/23/sdcc--service-data-control-center-configuration-guide-for-dummies
    Feel free to revert back.
    --Ragu

  • EWA Reporting for NONSAP Systems

    Hi all,
    we need an EWA reporting for NONSAP systems. Is it possible to generate EWA Reports containing OS information (like CPU Utilization, Memory consumption, Filesystems ...) from the monitored systems.
    If possible , are there any "How to guides" for implementing the NONSAP system in SMSY.
    Thanks in advance for your help.
    Regards
    Anton Brehm

    Hello,
    I would refere you to SAP Note 1257308 - FAQ: Using EarlyWatch Alerts
    If you look at section 1. Products and components for whcih teh EarlyWatch Alert is Available, the answer to your question is there, and states the products under section 1.1 and the components under section 1.2.
    This should clarify the answer for you.
    Regards,
    Paul

  • Configuration of EWA reports for java systems.

    Hello,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I  am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
    So far, so good according to manuals but when i  want do define data collection in the SMD for Gargage Collection  (task in scheduler) i cannot see host of my portal system.
    I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been  generated.
    Am i missing something?
    Some configuration in SMD?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system  NW 7.0 EP, SPS 6 (planning to SPS 19)
    Thank you for your advices!!!

    Hi Suveer,
    I did the configuration before. I forgot to mention it.
    I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
    Step BI Details
    Cannot invoke CCMSBISETUP on host localhost
    !! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
    Exceptions
    com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
    at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
    ... 37 more
    And also this one>>
    Step RFC Details
    Failed to create TCP/IP RFC on ABAP side (SM59)
    !! Exception :      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    Exceptions
    com.sap.aii.proxy.framework.core.BaseProxyException:      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
    at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
    Thanks a lot for your remarks

  • 2 EWA reports for 1 system?

    Hello,
    We got ECC and BW in the same system, with different clients number - and we got one EWA report every monday that cover both clients.
    Is there any way that I can set up EWA reporting so I got one EWA Report for my ECC client, and one other one for my BW client?
    Best Regards,
    Karl Yngve Andersen

    Maybe you can do this with 2 solutions.
    Transaction SMSY_SETUP or dswp.
    Edited by: Nico Effenberger on Oct 20, 2008 1:41 PM

  • EWA report for non-abap systems

    Hi Gurus,
    Good day.
    I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
    Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
    It is both? Which one?
    It would be also great if you can provide me links/documents in relation to my queries.
    Please do note that the current version of solman system is 7.1
    Thanks in advance for the help
    Virgilio

    Hi Virgilio,
    To generate an EWA report for Java stack system,
    you need to do following:
    1. install smd agent (diagnostics agent) on Java stack system
    you can install this agent standalone, details see note 1234384.
    The installation Guide is also attached in note 1234384.
    2. finish Initial Config and Basic Configuration in solman_setup for
    solman system, the setting about Enterprise Manager is also included
    in these configurations, please ensure EM is running properly.
    3. start managed system configuration for the EP system in solman_setup
    after selecting the system type 'Java', please finish all steps as
    suggested in which step. The Step 'Wily Introscope Configuration' is to
    install Introscope Agent which is used for Java stack system. More infor
    please read the installation Guide of Enterprise Manager and note
    797147.
    4. You should be able to see data in Wily Introscope and Workload
    analysis via
    Root Cause Analysis->End-to-End Analysis->select the system->Workload
    Analysis
    5. If the EP system is added in a solution, the EWA task for this system
    should be shown up in solman's SDCCN.
    Also check note: 976054"
    Thanks
    Regards,
    Vikram

  • Showing Grey Colour on EWA session only for PI systems

    Hi,
    I have a strange issue when I try to generate EWA report for PI systems. For all other systems the reports are generated fine and in PI systems are exactly the same configurations as in other systems. I want to let you know that in PI systems in SDCCN there I have scheduled Sessions Refresh with target RFC destination SM_<SID>CLNT000_BACK (Solution Manager) and  Maintenance Package  with target RFC SM_<SID>CLNT000_BACK (Solution Manager). After Maintenance Package  is running this generate one session number being send to Solution Manager. I think the configurations in satellite systems are ok (PI systems), but in solution manager after I start to process the data I get one report generated with grey color and only two pages. Do you know which will be the reason? Also I checked note 727998, and this didnu2019t help me.
    Thank you,
    Kind regards,
    Florin Radulea

    >
    Florin Radulea wrote:
    > Hi Paul,
    > Thank you for your response.
    > I checked those notes but my problem is because these systems (PI systems) are not able to generate EWA reports for ABAP stacks. There is not needed to generate reports for JAVA stacks. I want first to generate reports for ABAP stacks. I mention that in SMSY I set PI systems as being as ABAP also.
    > Can you also give me another advices?
    > Thank you,
    > Kind regards,
    > Florin Radulea
    Dear Florin
    You might want to review the following note :
    1322899    EWA incomplete after importing EHP/product incorrec
    Regards
    Amit

  • EWA reports for SAP Content Server

    Hi
    I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for  SAP Content Server.
    As per Content Server for EWA reports need to be configuring only Database and OS.
    Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
    Regards,
    Panu

    Hi There
    In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
    this link below..
    http://service.sap.com/EWA   >> Media Library
    Best Regards
    Jai Wardhan

  • EWA reports for non abap systems

    Hello gurus,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
    >>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
    In the SMD i can see just the abap systems  for which the EWA are being already generated.
    (i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
    Do you have any idea, what i have done wrong?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system , EP  SPS 19
    Thank you very much for your points!!

    Hello Jagan,
    I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
    And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
    Do you have any idea?
    Thanks,
    Best regards
    Slavomir

  • EWA For EP System

    Hi All,
    I want to generate EWA report for my Enterprise Portal system which is JAVA Based.
    I had read the document attached in note 976054. As per this note data will be collected using SMD.
    Now I want to know that from where can I start SMD? Is the any configuration require for SMD?
    My current solution manager level is Solution Manager 7.0 with EHP1 with SP19. So any new patch installation is require?
    All configuration will require at solman side only? No any configuration will require at Enterprise Portal side?
    Please guide me how can I generate EWA?
    Regards,
    Nisit
    Edited by: Nisit  Patel on Aug 10, 2010 7:30 AM

    Hi Nishit,
    Install SMD server on Solution manager system which will common for all portal system which is done once.
    Install SMD system on Portal system  with sapinst. now a days it come automatically installed during Installation of system.
    Instally Wilyintro-scope on Portal system .
    All system shuold be registered successfully in your SLD of lanscape for EWA generation.
    Thanks
    Manas Behra

  • EWA Report for DEV/QAS System (if possible)

    Hi Experts,
    I would like to know if it is possible to generate EWA reports for DEV/QAS Systems. I believe i have set up all the necessary RFCs for our SOLMAN to communicate with the DEV/QAS systems.
    When I try to create an EWA session in SDCCN of the DEV/QAS system, the only destination i can choose is "NONE" which is local.
    Any idea how I can send this to my SOLMAN. My SOLMAN is already configured to be the master system of my DEV/QAS system.
    Any help would be appreciated.
    Thanks.

    Hi Prince Jose,
    My problem actually is that I want to set up EWA for a DEV system. I have tested all the RFC connections to and from my SOLMAN.
    Even the RFC connection in SDCCN -> Settings .. -> RFC destination, i have 2, one SAP_OSS and my 'back' RFC to my SOLMAN and everything is working OK.
    Would you be able to give me a step by step guide on how to setup EWA. From what i know:
    1. Setup the system via SMSY (done)
    2. Generate the necessary RFCs (done and tested OK)
    3. Set SOLMAN as the master system of the satellite systems (done)
    4. Create the necessary task for EWA via SDCCN of satellite system
    Are the steps correct?
    Thanks

  • Activate EWA for satellite system in 3.2

    Hello,
    We have solution manager 3.2 with all the latest patches, and have included the satellite system in the landscape and generated the RFC's. Need to activate EWA for the system. Have defined a Solution. Need to how do you include a system in the solution because when i click on Solution directory --> setup EWA, it gives a message,
    "NO system found in landscape"
    Any suggestions / inputs are appreciated.
    Thanks and cheers,
    Chetan

    HI ,
    Kindly follow the below steps for the EWA activation:
    1)go to transaction SMSY enter your system details and check the system data is updating with the SLD (check this option in SMSY_SETUP)
    2)then define logical component fo rthis system then define this logical component under solution
    3)you will be having a option under that EWA configuration click on EWA active (check )
    and check the Send to SAP if you want the EWA repor thas to reach SAP once the Report is Red after analysis done in Solman by the Job SMS*
    4)then go to SDCCN in the solman then trigger the activation of session data for the particular sysytem if the RFC SM_SIDCLNT<CLNT>_back exists then task created in the satelite system for the session data to Solamn
    5)then check the EWA report and do processing in the operation for that solution
    Best Regards,
    Srekantha Reddy.M

  • GRC 10.0 SP14 - Poblems when generating rules for logical systems

    Hello Experts!
    We recently updated a DEV system to SP14 and we're having issues regarding the rule set generation. I'd like to know if you have faced a similar problem after installing SP14. The details are described below:
    Create a test function ZTEST_F1
    The action PFCG is associated to a Physical System (Test Connector SP14) and to a Logical System (Sistema Logico Retail)
    The logical system contains D05 among other connectors:
    And it’s defined as a logical group:
    The connector “test connector Sp14” points to the same system as D05.
    Now I create another function, let’s say ZTEST_F2
    Now let’s define a SoD Risk ZTSTSP14
    Generate rules and after that we check GRACSYSRULE table for such risk and we get:
    Let’s add more transactions:
    Generate rules:
    Now in the table we get:
    The logical system has been added to the GRACSYSRULE table for the new combination and also the physical system TST_D05, but there's no combinations for the system D05 for example.
    Now if we run SoD analysis:
    We have four combinations for the physical system TST_D05 but only two for D05 that belongs to the logical system:
    Do you have any clue? have you faced a similar problem?
    Thanks in advance.
    Cheers,
    Diego.

    Hello Collen!
    First of all I want to thank you because after aplying the note the rules generated fine and now the Risk Analysis is OK for the example described above:
    I've also tested with a huge number of risks and made a comparison between the results of the Physical conector and the Connector that belongs to a logical group and I got the same results as action level as well as Permission Level as expected.
    Regarding the note itself, we usually check for notes and we have implemented many notes in advance related to rule generation issues.
    The point is that, as my point of view is just not acceptable to get a new SP with this kind of issue. Rule generation is a core functionality and SAP must test such functionalities before releasing a SP and these checks cannot rely on the customer. For me, rule generation issues in GRC are just unnaceptable. I can accept issues with other modules or new functionalities, but with role generation they must guarantee that it works properly and perform the requiered tests before releasing an SP.
    Well... bottom line the issue has been resolved and I really appreciate the help you provided!!!!
    Many Thanks!!!
    Diego.

  • Java Add-In Installation for EHP4 ERP system

    Hello!
    we successfully upgraded our SAP ERP system to EHP4 for SAP.
    Our system has only ABAP stack.
    Question
    1) Is it possible to install a Java Add-In instance for the existing EHP4 system?
    2) If yes, can this be done on the same Windows server?
    Thank you very much!

    Specific Requirements
    Take the following specific requirements of the new installation process into consideration:
    - The previous SAPInst installation service Java Add-In in SAP ERP 6.0/SAP NetWeaver
    7.0 was able to add Java usage types such as EPC, or EP, to existing ABAP-only
    systems. This was possible only, if you added AS Java at the same time. The option of a
    Java Add-In installation is not any longer available as of the enhancement package 4 for
    SAP ERP 6.0. Thus, it is not any longer possible, for example, to add EPC and EP
    together with AS Java to an ABAP-only system.
    [SAP Enhancement Package 4 for SAP ERP 6.0|https://websmp201.sap-ag.de/~sapidb/011000358700000772192007E]
    There are many links on SDN discussing ERP EHP 4 dual stack:
    [Re: EHP4 Dual stack;
    [ECC 6.0 - EHP4 - Client Import;
    Hope this helps.
    Thanks,
    Naveed

Maybe you are looking for

  • Creation of po with mutiple line items using BDC

    Hi Gurus,       Can any body hav notes for creating po's using BDC with multiple line items in transaction ME21. I hav created po for single line item but if i tried to create multiple line items, it ll create multiple po's... thanks in advance arun

  • Error message opening TS Apps on RDWeb

    I am sometimes getting an error when trying to open an app on my webpage. I have 2 servers that are in DNS with their correct IP's. The farm name also has 2 entries in DNS pointing to each TS Server. Have I done something wrong ? Error is 'The connec

  • Oracle Linux 6 - stuck on Welcome Setup Screen, black screen on CTRL+ALT+F*

    Oracle Linux 6 DVD x64. Installed fine. I selected gnome for UI + all dev packages as I will be doing some dev work on the box. After install it boots okay and the Welcome setup screen shows up. It allows me to setup connection to ULN, create a user,

  • Node does not join cluster upon reboot

    Hi Guys, I have two servers [Sun Fire X4170] clustered together using Solaris cluster 3.3 for Oracle Database. They are connected to a shared storage which is Dell Equallogic [iSCSI]. Lately, I have ran into a weird kind of a problem where as both no

  • Re: How to access Property meta data for KM in webdynpro

    Hi Friends, I have created a custom property System admin- system configuartion - KM content - Content management - Global service - property meta data . I have assigned this property to a Folder , Now I want to access this property in my code . How