EWA: How to change alert DAYS?

Hi Experts,
I want to know how to change days of EarlyWatch alerts. They all are setup for every Monday. How can I change some of them to be scheduled for some other days as well. I'm on SOLMAN SP13. Before SP13, I was able to change the days by going to tcode DSWP, select solution, then solution Landscape > solution Landscape Maintenance > Solution settigs > Here I was able to see days etc...
Can some one please help me?
Thanks,

Red flag means, no data collected or transferred yet.
Relevant for missing EWA data in SolMan is the RFC destination from Satellite System to SolMan.
Please check the following in the Satellite System:
RFC Destination (default name: SM_<SID>CLNT<client>_BACK ) to SAP Solution Manager exists and is functional.
Transaction SDCCN (Service Data Control Center) must have been activated. Maintenance Package runs daily. RFC Destination (default name: SM_<SID>CLNT<client>_BACK ) is assigned in SDCCN: Goto -> Settings -> Task-Specific -> Session Data Collection -> RFC Destinations -> Settings.
Check protocol of SDCCN. You should find a task "EarlyWatch Alert for Solution Manager" (or similar)
Best regards,
Ruediger
Edited by: Ruediger Stoecker on Apr 1, 2008 9:04 PM
Edited by: Ruediger Stoecker on Apr 1, 2008 9:06 PM

Similar Messages

How to change the day and time seen on the calendar

Hi.
I am a bit confused as to how to restrict the day and time shown on a calendar.
The ical help says this:
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
Anybody got any ideas?
Thanks
David Tobin

OK, but what did the help menu mean when it said..
To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
Have you any idea how to achieve this, as i don't see the popup menu suggested with...
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
I am confused!!
Any other ideas?
David Tobin

How do change Default Day

I am pretty new to using Crystal Reports and I would like to know how can change the default start date from Sunday to Monday. I have looked around the web to find a solution and I did not find one that worked. I need to be able to change in a Group Header Selection.
The report is Group by the week using "for each week." I see there is place i can put a formula for the sort order, but I do not know how to write a formula for it.
Thank you for any help you can offer me.
Shane
Edited by: asparatu on Feb 23, 2011 1:46 AM

It is possible to customized the start of the week by creating a formula that returns the required start day, then group by the formula. The following example start day of week is Monday.
To customize the start of the week when grouping on a date field, complete the following steps:
1. Create a formula like:
WhileReadingRecords;
Local DateVar vDate := <INSERT YOUR DATE FIELD HERE>;
// Start Week Day
// Values accepted: crSunday, crMonday, crTuesday, crWednesday, crThursday, crFriday, crSaturday
Local NumberVar weekStartDay := crMonday;
// Substract N number of days to the date,
// The date will then be equal to the first day of the defined start day of the week
vDate - (DayOfWeek(vDate,weekStartDay) - 1)
2. Create a group on the above formula, and set the 'on change of' value to 'each day'.
The report is now grouped by a week that starts on Monday
Note that the formula could be written in one line, but for readbility I have added variables and comments, but if wanted you can use the following formula:
{Date Field} - (DayOfWeek({Date Field},crMonday) - 1)
Finally, I am attaching a sample report demonstarting the above technique
Hope this help,
Patrick

How to change alert tones

all my alert tones are the same.
i would like to have a different alert tone for each app
how do i do that?

Go to Tools > Profiles (select profile) > Options > personalise. Scroll down and find Message alert tone option and change it to whatever tone you want.

IPhoto Calendars, how to change white days to black

I'm not new to iPhoto or calendar making. In fact, I've created calendars each year with iPhoto since 2010. But this year I've chosen a calendar that has a light gray background, showing most days as Black and special days as White. When I created the calendar I chose to show Birthdays and import those from my Contacts. Except for some duplicated enteries on the same day, that birthday import went well. But since I will be preparing this calendar for my parents, I do not want to put some of my friends birthdays on the calendar. As such, I've gone through the calendar and deleted out those birthdays. The problem is that those days are marked in White originally because they are birthdays, and even after I delete out the birthday info, the day remains white. I double-click on it, but I cannot edit the day. So how do I revert that White to Black?
Here's an example calendar that is styled like mine: http://tinyurl.com/mmsm3gj
Note in that example that the special day is the 8th, shown in White. What I am saying is that I want to delete the text under that special day, and then have that day no longer be special. In other words, I want to revert that white 8 back to a black 8. How do I do it?
Thank you.

Create a huge rectangular shape inserted behind your tables.
Yvan KOENIG (VALLAURIS, France) samedi 7 avril 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

How to change default alerts in iCal?

Hello.
Every time you add a new event in iCal, the Info panel of the event contains a series of default alerts that you may want to add to it. However, all of them are useless to me (e.g.: "Send email to <my address> 4 days after), so I need to manually edit them event by event. Anybody knows how to change them? I have already inspected all the plist files related to ical, and looked inside the ical package content, but I found no indication of where to change these values. Using iCal version 5.0.2
Thanks,
l

John: Thank you, this is exactly what I wanted. I was indeed inspecting the plist with bbedit, but what I did not realize is that the file has some parts which are binary, so I could not see the PersistentMenu-lastUsedAlarms part by using a text editor. I opened it with Xcode and I did find what you were saying, and erased all the junk that was in there. In fact, the issue I had was also described here:
http://newsgroups.derkeiler.com/Archive/Uk/uk.comp.sys.mac/2010-06/msg02349.html
For some reason, it looks like after some upgrade the program adds were some positive values in the plist and I was stuck with default alarms that were set *after* the events I wanted to set an alarm for.
I did what you suggested, then added by hand new values to the PersistentMenu part of the plist, and I am now happy.
For everybody's information, to know what I did, it is enough to know to add Dictionary items to the PersistentMenu-lastUsedAlarms, with 3 fields:
-- AlarmTypeKey (this determines if you want a sound, or else an email, or else the other default alarm type keys. For example, sending an email is a Number, value 4; having a message with sound is a Number, value 3)
-- AlarmDurationKey: This is a Number, in seconds, that determines when you want your alarm to trigger. E.g: -172800 will be two days before. Must be negative for "before", of course)
-- AlarmParameterKey: This is a String, where you store the value that you want the alarm to have. For example, if you want an email to be sent, the AlarmTypeKey will be 4, as explained above, and this field will contain your email address. Instead, if you want the alarm to be a sound, the AlarmTypeKey will be 3 and this field will have the name of the sound you want (e.g., Basso).
That's it. Thanks a lot for the solution!
l.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple I'd as there was some problem with the first one. Now at some places still my old apple I'd is appearing. Pls adv how I change this to my new apple Id.

I created one apple I'd when I started using the iPad. After some days, I had to create a new apple id
as there was some problem with the first one. Now at some places still my old apple Id is appearing. Pls adv how I change this to my new apple Id.

Anything you downloaded with the first Apple Id will forever be tied to it, and will always require it to update.
The question here is, why did you think you needed to create a new Apple ID? What was the problem with the first one?
To get rid of th old one, you'll need to delete everything you downloaded with it, and then sign out of the ID in several places around the iPad.
Go to Settings->iTunes & App Stores->Apple ID->Sign out.
Repeat the process, for Facetime, Messages, Mail and any other App you need to sign out of.

In Lookout, how can I make the equivalent of a "4 changes per day" set-back thermostat?

Ok... I need some help here....
I have a Pot_TSP (Temperature setpoint) that uses a PLC register as its remote source. I added a night-time temperature setback feature by adding a "DAYTIME" expression as a permissive, and tying two new Pots (Pot_SP1 and Pot_SP2) to Pot_TSP's "reset value" : NIF(Expression_Daytime, Pot_SP1, Pot_SP2).
Client now wants this increased to 4 optional temp changes per day, just like a household 7-day programmable T-stat. Adding the additional conditions to the "reset" parameter was easy; one extra TimeOfDay timer for each temperature Setpoint change, arranged as "OR" functions. Each time the clock hits one of these TOD targets, Pot_TSP gets "reset" and the "reset value" gets written to it. Here's where I start to bog down... How do you arrange this so that when one of the 4 TOD targets goes "true", its corresponding SP value gets written to Pot_TSP? The closest I've been able to get is this: make a new Pot (Pot_X) with a min of 1 and a max of 4 and use a NCHOOSE to select which of the 4 Temp setpoint Pots Pot_X will use as the (next) SP. If I rotate Pot_X and the clock hits a TOD target, a value corresponding to the selected Pot gets written to Pot_TSP.
So can someone please tell me how to get Pot_X to align itself with the TOD events? I can get a limping model if I slave the NCHOOSE function to a Counter object, but if the customer has Lookout turned off or disconnected long enough to miss one of the events, Pot_X will go out of sync. Same goes for incrementing the Pot object. Can't allow that...
Since the clock never stops and only hits each TOD once every 24 hours, there would never be more than one of the 4 TOD conditions true at one time... is there a way to build an expression object (or the like) to ultimately produce a numeric (the Pot_TSP value) using the following logic: If TOD1 is true, return Pot_SP_1; If TOD2 is true, return Pot_SP_2, If TOD3 is true, return Pot_SP_3; If TOD4 is true, return Pot_SP_4 ????
Thanks guys.
G

Hi Ryan
Thanks again for your input! I'm more comfortable with the DataTable object (now that it's become more familiar), and thanks to you I now have a DataTable constructed for one zone (7 rows for the days-of-the-week, and 16 columns for the variables). Displaying of the cell data, cursor navigation, and reading/writing to the Pots' remote position source (in other words the actual GUI) work just fine. In order to expedite completion of the project for which this DataTable is intended, I am at a point where I am prepared to clone the DataTable 3 times to get 4 zones (that's one panel), then clone that result times the number of panels the site has....but I'd like to run this by you first:
Unless it's contrary to "best practices", should I do as above, or try to further multiplex the DataTable I already have by adding to it the other three zones? The Table I have now serves one zone; can it be expanded to serve (dare I suggest it) one panel (4 zones)? If you recall, I started out thinking I'd need one dedicated Pot for each variable in each zone (16) times 7 days = 96; using the DataTable, the cursor replaced the d-o-t-w so the number of Pots needed dropped to 16. My point: if I have to make separate DataTable objects for each zone, I also need to make 48 more Pots to serve them (which I'm obviously trying to avoid). Then I have to repeat this times the number of panels on site. I'm guessing that adding 3 more zones to the existing (one zone) DataTable is no problem since there's plenty of room left...
But would you add them as columns (to keep the cursor consistent across the zones) or add them as rows (to keep the columns consistent across the zones)?
If added as columns, can I avoid making those extra 48 Pots? Can I make my existing 16 Pots read/write to multiple columns, like change the Remote Source for Pot_Temp_SP_1 from "..\DataTable.B" to something like "nchoose(Pot_Zone_Selector,..\DataTable.B,..\DataTable.R)" where columns B and R contain Temperature setpoint values for Zones 1 and 2 respectively?
If added as rows, I'm guessing I don't have to make those extra 48 Pots. But what's the best way to deal with the cursor? Should I be looking at multiple cursors (one for each zone)?
I should also point out I've been using only L3 Pots since "normal" Pots won't accept an expression as a remote position source; if I change this to regular Pots coupled with SymbolicLinks, does it change the picture at all?
...and I'm using Ver 6.0.2
Thanks,
George

The picture that changes ever day when you open up firefox is gone how do I get it back

How do I reset the home page to show the picture that changes ever day to a different picture when you open up firefox

What was or is the home page setting that has the images?
Was that the Google website (www.google.com) with a background image?

How do you change the day of the week on your calender starts on

How do you change the day of the week your calender starts on??

You would have to change the region settings to a country whose formatting starts the week on the day you like:
iPhone User Guide (For iOS 5.0 Software)

How can i change alert text size?

hello everyone
how can i change alert text size?
thanks

What about using the properties of the alert, there are several settings for the font (also one for the size)

How to change preferences in calendar on ipad i.e want to change start day from sunday to monday like in icloud

how do you change preferences in calendar on ipad i.e want to change start day from sunday to monday like in icloud

AFAIK - and I'm pretty sure about this - you can't change the starting day of the week on the calendar on the iPad.

How to hide save changes alert window when no changes made to the form

hi,
in my form when i close the form without making any changes it displays do you want to save the changes alert.how to hide this alert when no changes are made to the form window.
regards
Yesukannan

Be advised that this solution will also exit the form without saving the changes and asking anything if the user did make changes.
You're probably changing some field from a PL/SQL trigger (hint: post-query or when-new-record-instance are likely). If you set the value of a field from a trigger or program unit that also marks the record as changed for Forms. Forms will then ask to save the changes when exiting the form.
If you want to prevent this, reset the record status after you change the field in the PL/SQL code.

How can i change alert tone for incoming messages on my ipad, for imessage?

How can i change alert tone for incoming messages on my ipad, for imessage?

Settings>Sounds>Text Tones

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I think it must be an IMAP account then, & in Mail>Preferences>Accounts>Advanced>Keep copies for Offline viewing:>Don't keep copies, then on the Server, or maybe it's just this one itself, but on the Server you have a setting to remove eMails after 30 days.
If it's a POP account we'd have to investigate that... but you didn't say so I'm guessing here.

EWA: How to change alert DAYS?

Similar Messages

Maybe you are looking for