EWA & IT Reporting on MDM System

Hi,
We are configuring our MDM System in System Monitoring.
Is that possible to configure EWA & IT Reporting for MDM Systems in Solution Manager System Monitoring.?
Pls Advise
Thanks
Arun

Hello
Please to be clear, EWA for MDM is possible however only the Standard JAVA checks can be made.
There are no MDM checks for EWA. There maybe MDM checks in the future.
So 1) Yes EWA can be generated on an MDM system with SDM installed
     2) The EWA will be a standard Java system EWA and will have no MDM specific checks.
Hope this makes everyhting clear.
Regards,
Paul

Similar Messages

  • EWA alert report for java system shows wrong data

    Hi,
    In our solman system, EWA alert reports are configured every week for all the production systems (both ABAP and JAVA). Recently oracle database was upgraded from 10g to 11g in all the production systems. The EWA alert report for ABAP systems is correctly taking the 11g database details and is suggesting parameter changes. Unforunately the EWA alert report for Java systems is still pointing to 10g database and is suggesting the parameter changes for 10g only but the systems are on 11g.
    In SMSY, the database of the java systems is maintained as 11g only and not 10g. STill we are not sure where the data is being fetched from.
    Please help me in finding the issue.
    Regards,
    Ragav

    Hello,
    iNote 1482818 would be iapplicable if not java checks are being made. You are not reporting no java checks, you are reportijng the check is being performed, but has the wrong value. When you updated the database dis you perform Solman_setup, Mnaaged system setup?
    The reason I ask s that is what prepares the java side for EWA. For isntance if you had on old version of ST-SER such as 700_2008_2 then it does not know about Oracle 11.2....but that is on the ABAP side, you would need ST-SEr 701_2010_1 to
    recognize ORacle 11.2 on the ABAP side.
    So while I am not 100% sure in this specific instance, it seems logical that if the Java side isn't recognizing the Oracle Database version ( which means it is making this check) then you may need to run the Solman_setup, Mnaged system setup to pick up the ability to detect a new version of Oracel on the Java side.
    It is certainly worth the try.
    Regards,
    Paul

  • Configuration of EWA reports for java systems.

    Hello,
    I am facing a problem with configuration of EWA reports for SAP NW Portal.
    I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
    So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
    I  am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
    I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
    So far, so good according to manuals but when i  want do define data collection in the SMD for Gargage Collection  (task in scheduler) i cannot see host of my portal system.
    I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been  generated.
    Am i missing something?
    Some configuration in SMD?
    My solution manager is running on Sap NW 7.0, SPS16,
    Sattelite system  NW 7.0 EP, SPS 6 (planning to SPS 19)
    Thank you for your advices!!!

    Hi Suveer,
    I did the configuration before. I forgot to mention it.
    I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
    Step BI Details
    Cannot invoke CCMSBISETUP on host localhost
    !! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
    Exceptions
    com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
    at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
    at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
    at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
    ... 37 more
    And also this one>>
    Step RFC Details
    Failed to create TCP/IP RFC on ABAP side (SM59)
    !! Exception :      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    Exceptions
    com.sap.aii.proxy.framework.core.BaseProxyException:      Source system cannot be set to Unicode                              , error key: RFC_ERROR_SYSTEM_FAILURE
    at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
    at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
    at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
    at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
    at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
    at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
    at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
    Thanks a lot for your remarks

  • EWA Reporting for NONSAP Systems

    Hi all,
    we need an EWA reporting for NONSAP systems. Is it possible to generate EWA Reports containing OS information (like CPU Utilization, Memory consumption, Filesystems ...) from the monitored systems.
    If possible , are there any "How to guides" for implementing the NONSAP system in SMSY.
    Thanks in advance for your help.
    Regards
    Anton Brehm

    Hello,
    I would refere you to SAP Note 1257308 - FAQ: Using EarlyWatch Alerts
    If you look at section 1. Products and components for whcih teh EarlyWatch Alert is Available, the answer to your question is there, and states the products under section 1.1 and the components under section 1.2.
    This should clarify the answer for you.
    Regards,
    Paul

  • Showing Grey Colour on EWA session only for PI systems

    Hi,
    I have a strange issue when I try to generate EWA report for PI systems. For all other systems the reports are generated fine and in PI systems are exactly the same configurations as in other systems. I want to let you know that in PI systems in SDCCN there I have scheduled Sessions Refresh with target RFC destination SM_<SID>CLNT000_BACK (Solution Manager) and  Maintenance Package  with target RFC SM_<SID>CLNT000_BACK (Solution Manager). After Maintenance Package  is running this generate one session number being send to Solution Manager. I think the configurations in satellite systems are ok (PI systems), but in solution manager after I start to process the data I get one report generated with grey color and only two pages. Do you know which will be the reason? Also I checked note 727998, and this didnu2019t help me.
    Thank you,
    Kind regards,
    Florin Radulea

    >
    Florin Radulea wrote:
    > Hi Paul,
    > Thank you for your response.
    > I checked those notes but my problem is because these systems (PI systems) are not able to generate EWA reports for ABAP stacks. There is not needed to generate reports for JAVA stacks. I want first to generate reports for ABAP stacks. I mention that in SMSY I set PI systems as being as ABAP also.
    > Can you also give me another advices?
    > Thank you,
    > Kind regards,
    > Florin Radulea
    Dear Florin
    You might want to review the following note :
    1322899    EWA incomplete after importing EHP/product incorrec
    Regards
    Amit

  • Automatic import of roles to BI from MDM system?

    Hi,
    we do have custom MDM system. Since our authorization system is complex and heavily based on master data I wonder is it possible to achieve automatisation of transfering roles from MDM system to SAP BI?
    General idea is to make a templates (PFCG - download template role to file) for BI roles which will be kept in MDM and used to generate a new role (based on new master data by simple search/replace in template file). Next issues are to transfer and import newly generated role to BI form MDM. At the moment we are using services and XML to transfer master data from MDM to BI and intend to use it in case of roles.
    What we are missing, at the moment, is a way to automatically import role to BI (report which would do job of manual GUI role upload in PFCG)?
    We were considering puting a such report for importing roles to BI to a process chain.
    Any other ideas?
    Kind regards.

    Hi Josko.
    You should definitely use the possibility to generate BI Analysis Authorization from data
    rather than creating PFCG roles in BI system:
    http://help.sap.com/saphelp_nw70/helpdata/EN/59/fd8b41b5b3b45fe10000000a1550b0/frameset.htm
    You should define your own datasource in MDM system to extract the current authorizations there
    and then create data flow to store the data in copies of the template DSOs for generating authorizations.
    Finally use the program RSEC_GENERATE_AUTHORIZATIONS as described in the above link.
    Regards,
    Lars

  • In Portal MDM system missing

    Hi,
    Iam using the discovery system for creating a POC i was going through a SDN demo on MDM portal where they have show me to create a MDM folder and assign it to the MDM system templete. Here Iam not getting this <b>MDM SYSTEM</b> Can any one help me in this please.
    Iam struck here in Potal part of MDM.
    Thanks,
    Suresh

    Hi Sridhar,
    Go to SAP Service Market place http://service.sap.com
    Select
    Software Downloads>>Entry by Application Group>>Support Packages and Patches>> SAP NetWeaver>> SAP MDM>> SAP MDM 5.5>>Portal Content
    download the following 2 files.
    1. BP MDM APPLICATION 5.5
    2. BP MDM TECHNOLOGY 5.5
    The above 2 files are available via SAP Solution Manager.
    Thanks
    Subbu

  • How to Sales Reports in CRM system

    Dear all,
    we have CRM and ECC system which are up and running.
    and also we have BW server connected to both systems. We want to see some reports like quotations report, sales orders report, deliveries report,etc... which are exclusively available in ECC system.
    Could any one of you explain me how to activate BW Infocubes and how to see Sd reports in CRM system with the help of BW system.
    Your suggestions will be highly appreciated.
    Thank you
    Raghu Ram

    Refer pre-configured scenarios and step by step guide here:
    http://help.sap.com/bp_biv170/html/BW/I15_EN_DE.htm
    For further more scenarios refer:
    http://help.sap.com/saphelp_nw70/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm

  • Hi Expert , crystal report export problem. system not responding

    Hi,
    crystal report export problem. system not responding.
    Thanks
    Rajkumar Gupta

    Dear Raj,
    Please try this
              Try
                Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
                Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
                Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
                Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
                Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
                rptDoc.Load(rptPath)
                rptView.ShowExportButton = True
                rptView.ReportSource = rptDoc
                For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                    oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                Next
                For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                    For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                        If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                            oSubReport = rptObject
                            rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                            For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                                oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                            Next
                        End If
                    Next
                Next
                'Setting Paper
                Dim rawKind As Integer = 0
                Dim printSet As New System.Drawing.Printing.PrinterSettings
                For i As Integer = 0 To printSet.PaperSizes.Count - 1
                    If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                        rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                        Exit For
                    End If
                Next
                Dim MyTest As New SaveFileDialog
                rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
                rptDoc.ExportToStream(ExportFormatType.Excel)
                'rptDoc.SaveAs("C:\TBKING.xls", True)
                '''How to export the report
                Try
                    Dim CrExportOptions As ExportOptions
                    Dim CrDiskFileDestinationOptions As New _
                    DiskFileDestinationOptions()
                    Dim rename As String
                    rename = rptName.Replace(".rpt", "")
                    Dim CrFormatTypeOptions As New ExcelFormatOptions
                    CrDiskFileDestinationOptions.DiskFileName = _
                                                "c:\Report\" & rename & "_Export_File.xls"
                    CrExportOptions = rptDoc.ExportOptions
                    With CrExportOptions
                        .ExportDestinationType = ExportDestinationType.DiskFile
                        .ExportFormatType = ExportFormatType.Excel
                        .DestinationOptions = CrDiskFileDestinationOptions
                        .FormatOptions = CrFormatTypeOptions
                    End With
                    rptDoc.Export()
                Catch ex As Exception
                    MsgBox(ex.ToString)
                End Try
                '' end by kevin shah
                rptView.Show()
                rptView.ShowExportButton = True
                Dim oFrm As New System.Windows.Forms.Form
                rptView.DisplayGroupTree = True
                rptView.Dock = System.Windows.Forms.DockStyle.Fill
                rptView.Location = New System.Drawing.Point(0, 0)
                oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
                oFrm.Controls.Add(rptView)
                oFrm.Name = "Report Viewer"
                oFrm.Text = "Report Viewer11"
                oFrm.ResumeLayout(True)
                oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
                oFrm.TopMost = True
                oFrm.ShowDialog()
            Catch ex As Exception
                objMain.objApplication.MessageBox(ex.Message)
            End Try
    By pressing this button XLS file be generated on C:\report\
    Hope this will resolved the issue
    Thanks
    Kevin

  • Error occured while refreshing webi report in bi system

    Dear Experts ,
    please look into my problem
    While refreshing WebI report in BIDEV system, we are getting the following error. The problem occurs only while refreshing the report.
    ERROR: a database error occured. the database error text is unable to connect to sap bw server incomplete logon data.. (wis10901)
    Regards

    HI ayur
    In the universe connection if the username and password is hardcoded then make sure those username and passwords are correct.
    else
    Make sure you are in the right BOX, for example if Universe is pointed to Prod, and you execute the report associated with that universe  in the Dev, then  that error will show up. So in universe connection find out to what BOX(dev, test, prod) it is pointed to and login to webI in the same BOX as universe pointed to and execute the report.
    It should work, if not please let us know.

  • Setting Date value in File Name while scheduling report to File System

    I am trying to set the file name as %SI_Name% Current Date.extension in Destination section while scheduling a crystal report to File system.
    So in Use Specific Name section i have added %SI_NAME% %SI_STARTTIME%.%EXT%.
    Schedule works fine for me and I get the document in the file location with name  'Title 2009-06-26-12-53-17.pdf".
    But I dont want time to be printed in the title, so the title should be "Title 2009-06-26.pdf". How i can achieve this.
    -Raghu

    Is there any way to achieve this?
    -Raghu
    Edited by: Raghavendra Barekere on Jul 5, 2009 3:09 PM

  • Error while creating MDM system on Portal

    Hi All,
    I am trying to create MDM system in EP. MDM is 5.5 SP06. EP is 7.0 . We have upgraded the MDM sca files on Portal from SP05 to SP06.
    While creating the system , after entering the server, we are getting the following error.
    com.sap.mdm.internal.protocol.manual.ServerException: File failed a crc check
    Please help
    Regards
    Shilpa

    Hi Shilpa,
    If this is your MDM build version 5.5.63.80 SP06. It means you are using MDM 5.5 SP06 Patch3 hotfix 80.
    You need to find the Sca file of compatible with this version.
    So they should be
    - MDMJAVAAPI06_03.sca
    - BPMDMAPPLN06_03.sca
    - BPMDMTECHN06_03.sca
    The hotfix number can slightly differ but the Support pack and patch number must match.
    You need to follow this link:
    http://service.sap.com/swdc
    (download MDM support packages) Download>support packages and patches>entry by application
    group>sap netweaver>sap mdm>sap mdm 5.5>Entry by component>Portal content
    Then select which MDM portal content you want and check what is the version of those available sca files.
    based on the availablity of the sca files you need to upgrade/downgrade or server.
    As compatibility between the server version and sca files is a must for proper functioning.If its not possible to change your mdm server version then you can ask your Basis team to hunt the matching sca files for you.
    Hope It Helped
    Thanks & Regards
    Simona Pinto

  • Getting error while uploding report in QA system

    Hi,
    I downloaded reports from Development system and uploading the same to QA system but getting the below error.
    Regards,
    Rohit Tripathi

    Check out this document to further understand analytics in C4C
    C4C Analytics 101 - Designing Reports
    and
    In conversation with Sebastine Augustine, product manager explaining Key Figures as part of Business Analysis that forms an integral part of the Cloud for Customer solution offering powered by the HANA Cloud Platform
    Thank you.

  • Schedule a report with the system date imbeded in the file name

    Hello,
    Could anyone tell me how I can schedule a crystal report with the system date imbedded in the file name (FileNameYYYYMMDD) through BOE?  When I scheduled the report through BOE, I gave a file name and selected Attach Date Time, but the file name is coming out slightly differently and with the time imbedded as well (FileNameYYYY-MM-DD-HH-MN I think). Is there a way to change the default system date time format in BOE so that the date stamp comes out the way we want it?
    Thanks!

    %SI_STARTTIME% will add the time the report ran too.
    Adding onlt the date will necessarily have to be done via the appropriate SDK.

  • Add web element in Crystal report for SAP system

    Hi all,
    I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
    But if I add the webelement for Excel sheet ,It shows the control.
    How can I add web element for SAP System? Can't we use web controls in SAP system ?
    Help me in this regard.

    Hi All,
    i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
    OS: MS Windows 7 SP1
    SAP Business One 8.82 pl7
    Crystal report 2011
    Crystal report integration package installed under B1_SHare/Client
    But still the problem persist on the workstation.
    Please help me solve this problem.
    Thank you,
    ana

Maybe you are looking for

  • Keynote remote app no longer working with keynote for ipad

    noticed after upgrading that the keynote remote does not pair with keynote for the ipad.  Any suggestion on a resolution or anyone else experiencing this issue?

  • Enterprise wide wireless solution

    Hi All I got task to design enterprise wide wireless solution for my client. There are 50+ offices from 20-600 users. Offices are mostly connected as a hub and spoke by MPLS or VPN IPsec. Most of the office will have one or more WLC but some will hav

  • Problem using url on local image

    Hi, i'm currently playing around with javaFx for a udpClient and i wanted to use Image included into my jar but doesn't work. ImageView {                          image: bind Image { url: ".//image//gradient.jpg" } ...it gives me: java.net.MalformedU

  • TS1363 Ipod Nano 7 shows up as an ejectable device in Itunes, but will not sync/does not show up as a device.

    My nano 7 will show up meaning an option to eject it shows up.  The sync options are not grayed out, but it literally goes into sync for about 10 seconds and then shows as complete.  None of my music has moved over to nano.  I've uninstalled and rein

  • "Buffer table not upto date" while creating Service entry via BAPI

    Hi All, I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further