EWA report change the frequency of the alert to monthly.

Hi all
In Solution manager we have early watch alert configured for weekly basis. But we need to change it to monthly basis.
In solution manager, when I execute solution_manager, and EWA reports I get reports for every one week. Where can i change this frequency?
Thanks
subbu

Hi Subbu,
Check the sim file at https://service.sap.com/rkt-solman to configure the EWA reports.
Hope this help
Regards,
Rajesh

Similar Messages

Is there a way to change the alert tone for the find my iphone app?

Is there a way to change the alert tone for the find my iphone app? The one they use from the factory is terrible! I tried it out and could hardly hear it from 5 feet away!

Welcome to the Apple community.
Unfortunately, so far as I am aware you cannot change this tone. I must admit I don't fully understand your problem, I've tried it myself and can hear it from some distance away.

I changed the alert phrase that usually says, "Excuse me, ____ needs your attention." And I need to change it back. It's cursing at me. :)

I changed the alert phrase that usually says, "Excuse me, ____ needs your attention." And I need to change it back. It's cursing at me.
I had changed this a long time ago, so I don't remember how. It was done on an older computer and carried over to my new one. I think it was done through the terminal...

See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311

Ora-07445 reported in the alert log file

Hi all,
We are using the following platform:-
OS: Solaris Operating System (SPARC 32-bit)
Oracle Server - Enterprise Edition / Product Version: 9.2.0.5.0
We encountered the following problem:-
There is Ora-07445 reported in the alert log file.
"ORA-07445: exception encountered: core dump [kgghash()+308] [SIGSEGV] [Address not mapped to object] [0x3222
000] [] []reported in the database."
These errors are signaled in more than 3 independent, unexplained, occurrences every day.
When this error occurred while User was accessing the application system, by right the case will be shown on the system, but they were no case found.
alert log are as below:-
Fri Jul 27 09:12:30 2007
Errors in file /disc3/oracle9205/RFDB/udump/rfdb_ora_27371.trc:
ORA-07445: exception encountered: core dump [kgghash()+340] [SIGSEGV] [Address not mapped to object] [0x3184000] [] []
Fri Jul 27 09:22:10 2007
Thread 1 advanced to log sequence 10730
Current log# 2 seq# 10730 mem# 0: /disc3/oracle9205/RFDB/RDO/logRFDB2a.rdo
Current log# 2 seq# 10730 mem# 1: /disc3/oracle9205/RFDB/RDO/logRFDB2b.rdo
Fri Jul 27 09:29:26 2007
Errors in file /disc3/oracle9205/RFDB/udump/rfdb_ora_27372.trc:
ORA-07445: exception encountered: core dump [kgghash()+296] [SIGSEGV] [Address not mapped to object] [0x3182000] [] []
The applications have encountered ora-3113 after a short period of time followed by ora-3114.
application log:-
RF0120-1 2007-Jul-27 09:46:57] Load m[RF0120-1 2007-Jul-27 09:29:30] SQLCODE: -3113
[RF0120-1 2007-Jul-27 09:29:30] Error Code -4105 returning from get score pan no.
[RF0120-1 2007-Jul-27 09:29:30] Message type :120
[RF0120-1 2007-Jul-27 09:29:30] Primary Account Number(PAN) DE0
02 :5440640155262702
[RF0120-1 2007-Jul-27 09:29:30] Processing code DE003 :003000
[RF0120-1 2007-Jul-27 09:29:30] Transaction amount DE004 :000000000001
[RF0120-1 2007-Jul-27 09:29:30] Settlement amount DE005 :000000000000
[RF0120-1 2007-Jul-27 09:29:30] Transmission Date and time
DE007 :0727092717
[RF0120-1 2007-Jul-27 09:29:30] Settlement conversion rate DE009 :60263158
[RF0120-1 2007-Jul-27 09:29:30] System trace audit no. DE011 :754710
[RF0120-1 2007-Jul-27 09:29:30] Local transaction time DE012 :092717
[RF0120-1 2007-Jul-27 09:29:30] Local transaction date DE013 :0727
[RF0120-1 2007-Jul-27 09:29:30] Expiration date D
E014 :0712
[RF0120-1 2007-Jul-27 09:29:30] Settlement date DE015 :0727
[RF0120-1 2007-Jul-27 09:29:30] Merchant type DE018 :5311
[RF0120-1 2007-Jul-27 09:29:30] Point-of-service(POS) entry code DE022 :051
[RF0120-1 2007-Jul-27 09:29:30] Acquiring inst. ID code DE032 :001912
[RF0120-1 2007-Jul-27 09:29:30] Forwarding Inst. ID code DE033 :001912
[RF0120-1 2007-Jul-27 09:29:30] Retrieval ref. no.
DE037 :754710356390
[RF0120-1 2007-Jul-27 09:29:30] Autholization ID response DE038 :356390
[RF0120-1 2007-Jul-27 09:29:30] Response code DE039 :00
[RF0120-1 2007-Jul-27 09:29:30] Card acceptor terminal ID DE041 :19306002
[RF0120-1 2007-Jul-27 09:29:30] Card acceptor ID code DE042 :000001106
020132
[RF0120-1 2007-Jul-27 09:29:30] Card acceptor Name/Location
What could have caused the above mentioned errors i.e Ora-07445 ; ora-3113 / ora-3114? How to resolve the problem.
Please help .
Thanks.

i am also facing the same some time in ora 9.2.0.6 on Sun OS 9 SPARC 64-bits
Errors in file /oracle/oracle9i/admin/FINPROD/udump/finprod_ora_6076.trc:
ORA-07445: exception encountered: core dump [0000000100FDE088] [SIGSEGV] [Address not mapped to object] [0x00000013A] [] []
Thu Aug 30 08:52:39 2007
Errors in file /oracle/oracle9i/admin/FINPROD/udump/finprod_ora_6078.trc:
ORA-07445: exception encountered: core dump [0000000100FDE088] [SIGSEGV] [Address not mapped to object] [0x00000013A] [] []
Thu Aug 30 09:41:49 2007

My iphone calendar keeps changing the alert and second alert times I put in

Ever since updating to 7.0.2, my Iphone calendar keeps changing the alert and second alert times I input for an event to different times. Why is it doing this and how can I fix it?

Are you syncing your phone with iTunes and then with iCloud? This can cause duplicates. Sync with one or the other, but not both.

Hi We got the below alert but its not reported in the alert.log

The following SQL error occurred ORA-00054:resource busy had accquire with NOWAIT specified but its not reported in the alert log file
Regards

Hi,
Error: ORA-00054
Text: resource busy and acquire with NOWAIT specified or timeout expired
=========================================================================
Cause: Resource interested is busy or the timeout specified by DDL_LOCK_TIMEOUT has expired
Action: Retry the command with a higher DDL_LOCK_TIMEOUT if desired
Check this what could be in alert log file :Monitoring Errors and Alerts
HTH

Changing the Alert style Property Dynamically

hI..
Is there any way to change the Alert Style Property Dynamically.... if there please tell me its urgent
thnks in advance
Regards
Yashavanth

yes, u can change properties dynamically through set_alert_property and set_alert_button_property
here is an example
DECLARE
err_txt VARCHAR2(80) := Error_Text;
al_id Alert;
al_button Number;
BEGIN
al_id := Find_Alert('My_Error_Alert');
Set_Alert_Property(al_id, alert_message_text, err_txt );
al_button := Show_Alert( al_id );
END;

Changing the alert tone when "find my phone" is activated?

Is there a way to change the alert tone on iphone 4s when the "find my phone" is activated? The one it plays is kind of weak. TIA!

Welcome to the Apple Community.
I don't believe there is.

Report with the alerts that have been thrown

Hi all!
We are using the XI alerts to send several e-mails according to the alert that have been thrown.
Now, I would like to know if some report could be automatically generated showing the information of these alerts. Is it possible?
Thanks in advance.
Regards,
Sergi

Hi Sergi !
That's strange. I assume you tried with a wide date range, just to be sure that it is not a filter issue.
Try this:
go to TX 'ALRTCATDEF', locate your alert category and write down the name. Maybe you can get it from the RWB Alert Inbox, I'm not sure. Anyway, in the ALRTCATDEF tx there will be one or more alert categories already defined. Also you can find the alert category in use in the part of the scenario where the alert is triggered.
Then go to tx SLG1, in object filter keep the "*" and this time complete the "External ID" field with the name of the alert category, matching the case.
Try to find the alert this way.
Regards,
Matias.

Only get to change the alert sound in Sound Themes in GNOME.

Okay, so I get sick and tired of my current sound theme, decide to go change it and go into Volume Control, since for no apparent reason the GNOME devs wanted to inflict more pain my putting the sound settings in there in 2.26.
I am greeted with this:
Where's the rest of the settings? If I can't change it in this box, where can I find my theme settings in gconf-editor?

z5rz wrote:
I have been trying to figure this out myself.. This may help somewhat.
The sound conf files are in /etc/sound/events. Each event, ie "login", shows a specific .wav file.
The .wav files are in /usr/share/sounds. I am assuming you just drop the sounds in here that you want to use and then change the sound file reference in the event files.
The interesting thing, is that the sound event files do not reference the actual sound file locations, just the name of the sound file. I have not idea what file is driving that.....
I haven't had time to goof around with this yet. I have been trying to find these for a while. All the references on the web, point to a "sound" program in gnome which is not in Arch. Some of the other distros, like Fedora have it in there.
Not in arch? That's not good. Maybe this should be a bug report, then?

Printing a Crystal Report changes the printers default tray setting every

Hey,
Hopefully someone have experienced this in the past,
I am printing a Crystal Report, and in windows the printer has the tray auto as the setting. When I print from word, mspaint, or notepad, works perfect.
But when I print via Crystal Report, it changes the deafult printers tray setting every time.
Anyone have any idea, if there's a hotfix or something for this, I have problems at the client machine.
Best Regards,
Love

I dont have much idea about CR 8.
I would suggest you to try with No printer option.
Try with this also:
On Page setup click on printer ->Properties->Apply settings for default printer.
Regards,
Shweta

EWA Report collect the wrong data

Hi all
Our EWA Report can not collect data perfectly
It says that
When we checked the log files of the archive runs, we detected that your archive strategy does not follow the SAP archive recommendations.
In the time period from 28.04.2009 to 25.05.2009 , we noticed the following problems:
- There was neither a successful archive run nor a successful off-line backup on Friday 22.05.2009
- There was neither a successful archive run nor a successful off-line backup on Thursday 21.05.2009
- There was neither a successful archive run nor a successful off-line backup on Wednesday 20.05.2009
- There was neither a successful archive run nor a successful off-line backup on Tuesday 19.05.2009
- There was neither a successful archive run nor a successful off-line backup on Monday 18.05.2009
There are 5 working days without successful archive run this week.
In fact, the backup run smoothly, for that period. I think the system read the wrong period. On 5 May - 6 May 2009, backup error but from 7 May until now, backup run smoothly
FYI : On 8 Mei 2009 we restart our production system
The saposcol and sapccmsr run already
but when I hit OS07N, there is no data on casapdb system, error "Partner casapdb_CAP_32 not reached (reading table)
Can anybody help to to solve my problem?
thanks
regards,
Della

well for backups as you say.....
SAP looks for offline backups every day and since you are not doing offline backups,so it says an error during EWA report,so you must not be too much concerned on backup error in EWA report,
what wrong data is EWA collecting apart from this
Rohit

Changing the alert sounds

I am new to the IMAC from the PC world. I am enjoying my quad G7 IMAC. I would like to change the sound when I receive new email, and when the computer alerts for an error. How do I do that with the IMAC. Thanks

Hi & welcome
Go to the Apple symbol in the upper left of the screen click and scroll down to System Preferences>Sound>Sound Effects and choose your new alert.
For e-mail, it depends on what program you use, if Apple Mail:Preferences (under the Mail heading in the menu bar)>General>New Messages Sound
Good luck!

Frames on reports (changing the order of printing)

Hi OTN,
I have 2 frames: frame1 and frame2.
I build a report in a way that frame1 appears first and then frame2.
What I want is to inverse the order of the frames(frame2 appears and then frame1) without rebuilding my report.
Thank u in advance

HI THERE
I DONT THINK IT IS POSSIBLE 2 CHANGE THE ORDER OF FRAMES AS SUCH PROBBLY BY LOGICALLY
SOLVING I THINK IT CAN BE WORKED OUT .PLEASE SEND ME THE PROBLEM IN DETAIL

Captivate 8 - Changing the alert message in Firefox

Hello there,
Is there a solution to change the incompatibility warning message that appears when an CP8 publication is visualized with Firefox?
thanks

well the problem turns out due to smart shapes as buttons.
didn't quite find a js script edit that can help.. but the only alternative we had was to go back to the project and replace smartshape buttons with image buttons.
hopefully adobe patches this issue..

EWA report change the frequency of the alert to monthly.

Similar Messages

Maybe you are looking for