EWA Report do not generate ..

Hi ,
The early Watch Report is not generated. I have checked every thing , rfc are working fine and services are activated also. Created a new Refresh Session using Sdccn In my satellite system. BUT i can not see the job SM:EXEC SERVICES executing in Solution manager. I have manually scheduled this job but it is not released . i think this can be the reason..
Solman is ST25
Rtcctool prerequisite are done in solman and in r/3 system
Please Help..!!!
Thanks ,
Neel

Hello Neel,
for this answer I expect that EWA has worked in the past times because I had a similiar issue at a customer solman. The problem was a syntax error in a file updated via ags_update.
/1AGS/IEA_SWCM_____________003
Name of the include:
/1CAGTF/IF000180
Include was inserted in /1CAGTF/IF_LOGFUNC_000500
inserted code:
    Includes belonging to Logical Function
    CMO_EWA_TRANSPORT_MGMT:
    INCLUDE /1CAGTF/IF000170.
    INCLUDE /1CAGTF/IF000171.
    INCLUDE /1CAGTF/IF000180.
Maybe you are facing the same problem...
Basti

Similar Messages

EWA report did not go to SAP!!

Hi Exprts,
my EWA report did not go to SAP this time.. It has been going before.. is there any reason? Can someone please help?
Thanks,
I will post points for sure!!

Hi Afi,
the EWA report is scheduled every week in the SAP Solution Manager system for the satellite system.
As described above it's forward to SAP after first execution
- every 4 weeks
- in case of a red rating of the overall session.
Sessions forwarded to SAP are indicated by a small "SAP" icon right at the session link (tx DSMOP, Operations: Solution Monitoring -> EarlyWatch Alert).
Do you refer
- to EWAs scheduled via SolMan or
- to EWA scheduled as a session directly in SDCCN (session number contains a Z)
These session data (also know as download data) is sent to SAP and you are able
to access the generated MS Word (XML) report in SAP Support Portal.
I am not aware of other functionalities (and I am quite familar with this topic).
Sessions with GREEN, YELLOW are not sent in SAP Solution Manager to SAP every week. I have never seen this and it was not developed.
Could you explain in more detail
- how did identy forwarded sessions in the past
- what's wrong now, how do you see this.
- What's your current Support Package level
Best regards,
Ruediger

EWA alert report is not generating in SMP through SDCCN !!

Dear Techies,
Kindly help me on this issue,
I am generating EWA in SDCCN, it is generating fine through RFC Connections successful. But I am not getting EWA report in SMP. All steps performed successfully but no EWA report in SMP inbox ( service messages ).
Is there any changes do we need in Service market place to get EWA, or how to enable EWA icon in Service market place. PFA
Thanks & Regards
RAZZ

Hi Deepak,
Pls find Screenshot shared, is there any RFC connections needed between SOL & ECC systems for this activity ???
Done below logs
Regards
Raj

EWA Alert configuration done but report is not generated

I have setup the EWA congiguration for a Solman 7.0 , i executed rtcctool and implemented addons now everything is seen in green , also activated SDCCN and checked for all RFC ...everything is working fine .i saw two tasks service preparation check and maintenance check and executed them properly i also created a solution in DSWP and activated EWA for that solution . I followed the EWA tutor available at service marketplace properly but still when i create a early wath alert in opertaions in DSWP in solman , i see this waiting symbol and dont get any report in return , even after refreshing session am not gettin it here in DSWP. Please help me out and suggest some solution.
I did this setup to get EWA report of Solman system in that system itself , i mean i want report of solman system in it , i am not using any satellite system here, is this possible to do so . Please guide me .

Hiii
David ......i refreshed the service definitions and i ran service preperation check and maintenace package , both were ok after that i went to DSWP in operations(inside early watch alert Tab) and i created a new service named "SAP early watch Alert " i selected my solman system while creating this service but service is in Waiting process in DSWP in operations , sign is not of blue bottle or Red flag but the wait Sign that we usually get and when i click on it it says "The session is waiting for data from a remote system. Data transfer can take up to one day." it also gives steps to start it manually by going to SDCCN and creating task "Refresh Session" i also followed that process using "None" Rfc but still in DSWP in opertaion its in Wait and still same message inside it "The session is waiting for data from a remote system. Data transfer can take up to one day."
Please help me out in resolving it.

BIP Report does not generate in Siebel 7.8

Hi Experts,
We are having a problem not generating BIP report in Siebel 7.8. It says 'failed to generate report'.
The xdo.log displays
[100710_043210802][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210802][][STATEMENT] Generating page [4]
[100710_043210802][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210802][][STATEMENT] Phase2 time used: 16ms
[100710_043210818][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210818][][STATEMENT] Total time used: 7141ms for processing XSL-FO
[100710_043210818][oracle.apps.xdo.template.rtf.field.RTFFieldResult][STATEMENT] stylename=Normal
[100710_043210833][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica closed.
[100710_043210833][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210833][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica-Bold closed.
[100710_043210849][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210849][][STATEMENT] FO+Gen time used: 7172 msecs
[100710_043210849][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210864][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) is called.
[100710_043210864][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210880][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210880][oracle.apps.xdo.template.rtf.field.RTFFieldResult][STATEMENT] stylename=Normal
[100710_043210896][oracle.apps.xdo.template.FOProcessor][STATEMENT] clearInputs(Object) done. All inputs are cleared.
[100710_043210896][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210896][oracle.apps.xdo.template.FOProcessor][STATEMENT] End Memory: max=508MB, total=388MB, free=231MB
[100710_043210896][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[100710_043210911][][STATEMENT] PublicReportService::generateReport FINISH and Return BIPReportResponse --- Time Elapse = 149007
We cannot trace where the error is coming from. Can anyone know that to do about this? Thanks!
Edited by: user11174318 on Oct 7, 2010 4:58 AM

Hi,
Yes, this is fixed.
The root cause was a security patch from Microsoft.
The solution:
- Remove Microsoft Patch KB974455.
or
- uncheck the ‘Use HTTP 1.1’ flag under Internet Options > Advanced tab.
Regards,
Hakan

Oracle Clinical Reports - Ouput not generated

Hi,
When i try to run reports within Oracle Clinical it runs as "Success" as per Batch Jobs window.
I have run it using destype=FILE and desname=<reports_output_path>
The "View Log" also opens the log, but when trying to "View Output" it gives the following message in the explorer window:
File <reports_output_path>\o489.pdf does not exist
When i view the Report details in Report Queue Manager it shows the following error:
Terminated with Error :
Caught exception: exception oracle.reports.RWException { oracle.reports.RWError[] errorChain={struct oracle.reports.RWError { int errorCode=56093, java.lang.String errorString="Cached output for job 23 is no longer valid", java.lang.String moduleName="REP" }} }
The Report is being generated sometimes as a PDF file in the "Cache" directory of reports server, but the output directory doesnt contain any pdf file.
Any ideas folks?
Best regards,

Hi,
Thank you for the response.
1. This happens with all output types...I guess PDF Plugin is installed as it is generating a PDF in the Reports Cache Directory that is D:\oracle\9iDS\reports\cache
2. RXCPROD has been NOT been given Local Administrator rights. But it is a member of "Power users" group.
Does running a report in any way depend on the RXCPROD account...i thought it was just for running PSUB?
Any further ideas?
Best regards

EWA report is not opened in dswp

Dear all,
I got an error when i opened earlywatch report from DSWP for speacfic Solution.
Kindly check below error .
E-Mail Hint: to search, select this document and choose Ctrl+F
Error: An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause, Program CL_GUI_GP=====================CP, Include CL_GUI_GP=====================CM017, Row 1
Kindly advise

Hello Satheesh,
You can try updating the SAPGUI, as suggested.
But I think this problem is related to MS Word.
Satheesh, one way you can confirm the proble is with MS Word is to open the HTML version of the report.
Instead of clicking on the Word Document, either 1) Click on the eye classes, when the session opens, click the HTML button on the top, or 2) On the left hand side click the link.
If the HTML version opens then you know the problem is limited to just MS Word...if you have a problem with HTML, perhaps it is the SAPGUI. I suspect you will be able to open the EWA report in HTML. That can be a workaround until you implement a solution. However if it looks like it is limited to MS Word then I would advise the following.
Please check SAP Note 199123 - Word Settings and make sure that everything is set as per the note for yuor versio of MS Word.
If you are getting the error " MS Word Template Assignment failed" then you will need to apply SAP Note 1172706. If you are using Word 2000, that version is not supportedand you will need to be on at least MS Word 2002.
Also be aware if you are on Windows 7 or MS Word 2010 you should be on SAPGUI 7.20.
Regards,
Paul

EWA report is not showing in solution manager 7.1 SPS10

Hi Experts,
I have configured EWA in solution manager 7.1 SPS10 as per guides and best practices and managed system is showing perfectly for MOPZ configuration, RFC's are working fine but the Background job SM:EXEC_SERVICES completes in a few seconds with job log content showing the error
Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)
The EWA alert is generating successfully in managed system and available at service market place but it is not showing in solution manager because of the above mentioned error
Please let me know any solution for this problem.
Thanks,
Bharat.

Bharat,
Note 1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1 should have most of the answers related to EWA
Also Make sure you add the system to active solution by using "Put in Solution".
"Alerts for system DEV in solution 'Development systems' cannot be sent (denied by customer)" this msg is for sending alert to SAP. check if note 1925658 is implemented and also note 1984512.
-SS

Netflow is not showing on prime infra 1.2 and also reports are not generating

Hi friends,
I add my router to cisco prime for netflow and configured it by temelate as mentioned by cisco in deployment guide. I got netfloe till last friday but today i am getting anyflow on prime.
second I am not able to generate raw netflow.
how can i removed any device from data sources ifthis is nolonger present there. for better understanding i am also ataching the snapshot.

Hi,
Thanks
Yes I have configured the command âaaa accounting exec default start-stop group tacacs+â
As I have mentioned all the other reports are working. Which user and when he has logged in and what commands he has used. Only the TACAS+ Accounting and logned user is not working.
Regards,
Vineet

EWA report is not displayed in solution_manager

Hello Gurus,
in our SolMan 701.06 / ST 400-24(SAPKITL434) we had the following error at showing EWA in tac solution_manager.
Error: &EA1000000007291&: attribute not found: &TEXTPARAM& &check_244_comment&, Programm SAPLDSVAS_PROC, Include LDSVAS_PROCERI, line 48
We can not find any solution.
Notes 1470218, 1491227, 1500842, 1502573 don't solve it.
Has someone any suggestion?
regards
Chris

Hello Chris,
To resolve this issue, please proceed as follows:
1. Perform a complete refresh of the service definitions in your solution manager. Please use destination SDCC_OSS. The steps you have to perform are mentioned in SAP note 727998.
2. Execute the report RAGS_DSWP_SERV_CONTENT_RESET with the option "Remove content completely". You are then able to download and activate the service content again in transaction AGS_UPDATE or in the report RAGS_DSWP_SERV_CONTENT_UPDATE (more info in note 1317901).
Regards,
Daniel.

Report will not generate PDF only the XML output. View XML icon disabled

I created a PDF format report.
When the report completes, View Output shows XML code not the PDF output.
View XML button is disabled from Diagnostic on view request screen.
Any thoughts. All settings are the same as when other XML to PDF reports are created. Not sure why this one is not working.
Thanks

I'm afraid this is not an installation issue, it rather sounds and application server one, at the operative level.
I suggest you to post your thread at the Fusion Middleware or Developer Tools forums.
You didn't provide any OS nor Oracle / AS version, I suggest you to specify this information when posting in future threads.
~ Madrid.

EWA reports not generated from Solman

Hi All,
EWA reports are not been generated from Solution manager system.
Earlier they were working fine. But now it is not. We need to troubleshoot it.
Kindly suggest some healthy steps so that this could be started again.
Regards,
Sujit Takale

Hi man you dont gave to us a lot of informations, they are tons of reasons ... If RFC connection are generated correctly, make sure your followed the tree setps using the transaction ags_update.
Just double check that to see and provide to us more informations like error logs or something else
regards

Parameter issue - report not generating any pdf files

Hi All,
I'm trying to run a report which generates pdf files. Is there any limitation on the parameter string size? For one of the parameter values - '11F EA Accept nonhonor ASnSOMnSON_20091201090150846' the report is not generating any pdf files. I assumed the reason is of the keyword 'AS' in it and created another parameter value - '11F EA Accept nonhonor AnS-SOM-SON_20091202074331997', but it is also not generating any pdf files. I get this message from Adobe Reader " There was an error opening this document. This file cannot be opened because it has no pages. " The report is working normally when i hardcode the same parameter values into the logic. Any suggestions on this?
Thanks.
Edited by: user1049091 on Dec 2, 2009 9:17 AM
Edited by: user1049091 on Dec 2, 2009 12:37 PM

Tim,
That report is working normally for all the parameter values, except this one. It is not working only if i pass the value - ''11F EA Accept nonhonor ASnSOMnSON_20091201090150846' as a parameter. It is generating the pdf files when i hardcode the same value into sql query logic in the data template, instead of passing it as a parameter. Please advise.
Thanks.

NVision Report not generated with email option in the Run Report page

Hi ,
I want to send the nvision reports through email to the users, I tried it by setting the email option in the drop down of the "Type" after giving "Run Report" and then specifying the email ids. The issue is i am getting emails , but the report is not generated which otherwise generates, and hence no attachement is seen on the email .
Anybody faced this issue ?? Please help
Regards,
Kanchana

Hi again!
You are absolutely right! I will mark as solved in 5 mins (can't do it now, thread to fresh it seems).
thanks
Manfred

EWA does not report security notes missing and java systems

Hello guys,
Our early watch report don't contain section 7.1 with security notes missing in the system.
We have solution manager 7.0 with ST-SER 700_2008_1 SP4.
What do we need to configure so that ewa reports security notes missing?
Another doubt, how can I get the list of security notes missing in java stack system like portal?
thanks.
regards,
Filipe

hello Filipe
Below is a line from the SAP note 888889.
"In the SAP EarlyWatch Alert report, the "Service Preparation Check" unit complains that Note 888889 is not implemented. As a result, the check for security-relevant notes can only be carried out partially in the "Security" section."
Looks like that could be the reason for that.
For JAVA stack there is no note concept.
Thanks & regards
bala

EWA Report do not generate ..

Similar Messages

Maybe you are looking for