EWA Report not being sent for two systems

Hi Experts,
We are having one issue in EWA Report in solution manager. Searched hard but could not find solution.
Our solution manager is configured to provide EWA for 4 systems- ECC, BW, PI and Solution manager itself.
The configurations are in place to the extend that we are able to view the weekly reports in Solution manager.
Issue is -
1. We are able to recieve mail notification for Solution Manager and ECC but not able to get for BW and PI.
2. The ECC report is coming ok, but Solution manager report is blank.
The places I checked the configuration -
1. SDCCN for all systems.
2. SOLMAN_EWA_ADMIN - all systems active and chcked for EWA
3. Background Jobs for all systems -Maintenance Package, Refresh Session, Earlywatch Alert for Solution Manager
4. Background Jobs related to the task including SM:EXEC SERVICES
Later on I deleted and rescheduled the job SM:EXEC SERVICES to make sure it covers all systems.
Data is visible in Solution Manager but report is not being sent over mail for two systems- BW and PI.
Solution manager report is being sent but empty.
Please suggest.
Regards,
Sabita

Hi,
what is your ST verison? check this note applicable or not
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931]
and chek the version of your service updated ST_SER too, patch this also solve the issue
refer this [Note 1482818 - Service updates ST-SER 701_2010_1|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001482818&nlang=E]
Jansi

Similar Messages

Mail not being sent for background job spool

Hello All,
I have created a back ground job by adding a mail id in the spool receipient list. The job has finished successfully and spool is created but the mail has not been sent I have checked SOST transaction and no mail has been sent to this mail id.
This is only happening for some jobs other jobs are able to successfully send the spool as mails to the mail id's mentioned in spool receipient list.
I would like to know why this is happening only for some jobs and how can I check the whether mail has been generated or not.
Your replies will be greatly appreciated.
Thankyou,
Ranjan

Hi
To check whether mail is generated you can create dynamic break-point with SAAB transaction.
Using this transaction you create a memory area for your jobs where you can load any data value of your report..
Probably something goes wrong with COMMIT of Mail Function module system.
Hope to help..

Sections of report not being displayed on some systems

Post Author: jlutz
CA Forum: General
Hello... strange issue... We have these Crystal 11 reports deployed that are being called via a VS .NET 2005 application. The reports display fine on most systems, but on some systems (Dells, a few years old, 512mb of ram), sections of the report are not being displayed. For example, on one report parts of the header are not displayed, nor is some of the subtotal sections etc.However, if they zoom to 75%, they can view the subtotal section but the header part disappears. Additionally, if they export or print the report, it comes out just fine! Any idea what could be going on here? Thanks!

Post Author: PeterLiebich
CA Forum: General
I have issues in ReportDesigner when I have my hardware acceleration set at maximum try reducing it. Goto
ControlPanel-> Display Properties (settings Tab) -> Advanced Button -> troubleShoot tab. I had to set my down by 4 notches before it worked. - Try setting it to none to see if it fixes your issue

Mail not being sent for a background job scheduled.

Hello all,
We have a report which is scheduled in background. The job runs for every 10 mins in development server and sends the status to various mail IDs. The job runs successfully and the status shows as 'FINISHED'. But users are not able to recieve the mail.
Mails are sent using the FM "SO_DOCUMENT_SEND_API1".
When the debug the report everything works fine and the user recieved the mail. Any pointers to this would be of great help.
I tried searching in SDN for existing posts but could not find any relevant thread.
Thanks in advance.
Regards,
Chandra.

Hello,
PFB piece of code showing how the FM is called.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
         EXPORTING
              document_data       = wa_doc
              sender_address      = wf_sender
              sender_address_type = 'SMTP'
         TABLES
              packing_list        = it_paklist
              object_header    = it_obj_head
              contents_bin      = it_obj_bin
              contents_txt      = it_obj_txt
              receivers          = it_obj_rcv.
Also , please note that this report has been scheduled some time in last year i.e. 2008 and it was running successfully by sending mails. But from past 2 months the report is not sending mails.
Regards,
Chandra
Edited by: Chandra A on Sep 7, 2009 2:17 PM
Edited by: Chandra A on Sep 7, 2009 2:17 PM

Reports not being sent as attachments to email

I used rwcli60 to fire off a report to a report server (both running on Solaris 2.6), with destype being mail, and desname my email id, and desformat PDF. I did receive the email of the report, but it showed up in the body of the mail instead of as an attachment. What should I do to make the report be sent as an attachment? Is report server invoking r60mail.sh (which has commented out text for orasend) and invokes plain mail? Any help would be much appreciated.
Thanks
murthy

We solved this problem by changing r60mail.sh. We changed r60mail.sh into a Perl script, and used the MIME::Lite module of perl to send out the report as an attachment.

HT1920 Email is not being sent for reset security questions?

When I click send reset security questions to t********@gmail.com I do not recieve an email. I checked the spam and all other inboxes but still nothing. Anyone able to assist with this or have had a problem with it in the past.
~Thank You

If you aren't receiving the email (you've tried clicking the reset link again ?) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

Batch Process mail notifications not being sent

Racking my brain on this. On our prod 9.3.1 server, we reconfigured the mail server/database. I logged in as the application owner to establish the mail in application settings. Under workspace/administer/notifications I am able to successfully send a test email.
The emails are not being sent for any of our workspace reporting batch processes. What log would be associated with this for further review?
JTS

FR_GLOBAL_PROPERTIES didn't have the smtp server populated..once populated and then the scheduler service restarted the emails are working..
JTS

Suddenly many emails are not being sent or received on either of my two yahoo email accounts HELP

suddenly many emails are not being sent or received from either of my two yahoo email accounts.
Genius Bar no free appointments for a week.
HELP

try deleting and readding your yahoo accounts. Yahoo has been upgrading their servers for months now, and have been effecting users' accounts as they do so. I have two yahoo accounts and have had each of them mess up for a day or two before they start working again.
Chances are the issue is on yahoo's end. When mine messed up I simply accessed the mail via the web and safari until it cleared up.

Why are messages in my outbox and not being sent on my iphone 5. I have had the 5 for over a year and never had this problem before.

why are messages in my outbox and not being sent on my iphone 5. I have had the 5 for over a year and never had this problem before.

Text messages or emails?

Idocs not being sent from 4.6c to 6.0 system

Hello,
I am sending Idocs from a 4.6c R/3 system to a 6.0 R/3 system. I can see that the Idocs are being created and sent to port OK (status 03) in the 4.6c system but not able to see the Idocs in the 6.0 system.
Actually, there are 2 cases but in both cases I am using the same function module 'ALE_DISPUTE_CREATE' to send the Idocs but only in the first case Idocs are received in the 6.0 system. I checked the parameters of the function module in both the cases and they are same in both the cases with the only difference being the values.
One more difference is the way the data is prepared . In the first case, 'FDM_CASE_DATA_PREPARE' is used to prepare the data and in the second case I am creating the data using normal data extraction and internal tables after which I pass the datas to the function module 'FDM_COM_CASE_CREATE' which is also used in the first case.
'ALE_DISPUTE_CREATE' is within this function module.
I checked the queues in both the systems and did not find anything stuck there. One more interesting case, If I copy the Idocs which are not being sent using WE19, the Idocs are being sent correctly and received correctly in the 6.0 system.
Please advice.
Thanks,
Laxman.

Hi Laxman,
You said that the Status of the IDOC at sender side is '03', have you checked the status of IDOC in reciever system. Check the details of DOC using WE02. Use BD87 to Monitor the messages issued during IDOC processing. These messages will help you to reach to the exact problem.
Regards,
Vaishali.

Iphoto won't fully open after computer being off for two weeks.

After being gone for two weeks I came back home, turned on my computer and tried to load some pictures I had taken into IPhoto. I opened the program but in only partially opened and all I get is the spinning pinwheel. After waiting several minutes for the program to finish loading I finally had to force quit it. After several attempts I gave up. I've downloaded all updates and don't know what else to do. I'm wondering if the most recent update is for Lion and I'm still running Snow Leopard. Could that be the problem. I've sent the reports to Apple but of course won't receive any response. Any help would be greatly appreciated.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

Notifications are not being sent when Bulk Load is done

Hi All,
I have OIM 11g setup on my machine. I use the bulk load utility for loading the user data. Now in my OIM setup, the notifications are being sent for all stuff like Reset Password. New account creation and other. However when I bulk load the users, notifications are not sent to their mail ids. I am running the scheduled job "Bulk load Post Process" which is necessary so that the users are synced to the LDAP repository. I have the LDAP Sync option checked and also the Notifications option set to yes in this scheduled job. Though the users are loaded successfully and are synced properly, the notifications are not sent. Can some one please guide me as to what could be the problem here?
Thanks,
$id

The code is probably only called in the Event method of the event handler that sends the notification. You can check the mds files and find the notification you are looking for and then use a code decompiler to find the class that is called. You can then use this code as a sample, or write your own notification code and create an event handler that runs in the BulkEvent.
And on another note there is also this System Configuration Variable: Recon.SEND_NOTIFICATION which is set to FALSE by default.
-Kevin

Images not being sent with forwarded emails

Hi,
When I forward an email sent to me that has attached images, those images are not being sent when I forward the email.
Yes, I am being asked to "Include" the attachments, and I click the Include button.
I see the images in my message to be forwarded just before I send it, but the recipient does not get the images.
Any assistance would be appreciated.
Thanks

Posts: 26
From: New England
Registered: Oct 15, 2005
Forwarding Mail fails to include pictures
Posted: Nov 26, 2009 7:54 PM
Reply Email
Recently I've had a problem with my iPhone 3Gs when I forward an email that contains graphics. The graphic is fine on my iPhone but when it arrives the picture is missing. I am selecting 'include graphics'.
I've re-booted - no change.
I've restored from a backup - no change.
I've restored without using the backup - no change (other than I lost a couple email accounts etc.)
Anybody got any other suggestions?
TIA
Tim
Intel iMac / MacBook Pro Mac OS X (10.6.2) 80 gig Classic iPod, 32 iPhone 3Gs
wmdilson
Posts: 3
Registered: Oct 9, 2009
Re: Forwarding Mail fails to include pictures
Posted: Feb 14, 2010 9:31 AM in response to: Timothy Adams
Reply Email
I have been having the same issue since late September and been in touch with Apple support since. First they said they had no other reports on it so it was my phone. I started checking and found many other with the same issue. I called back and finally in November I was told they were aware of the issue and was working on it. The first week of January I called again and was told the update first week of February was going to correct this. I did the new software update and guest what....IT STILL DOESN'T WORK!!! It is now February 14th and I am on the phone once again for the same issue that was known back in October 2009. I am paying $30 for data plan that I can not utilize 100%. My question after being patient for 5 months is who is going to refund me a portion of my data plan? Apple or AT&T?? This is a software problem that really needs addressed. Apple just releases an iPAD and can't correct this email issue??
iPHONE 3gs iPhone OS 3.1.3
ernie goldstein
Posts: 177
Registered: Feb 1, 2005
Re: Forwarding Mail fails to include pictures
Posted: Feb 22, 2010 5:33 AM in response to: wmdilson
Reply Email
foward email
Posted: Jan 29, 2010 10:14 PM
Reply Email
i have the 32 g 3gs iphone. i have no problem when i send pictures from iphone from my photo album. the problem i have is when i receive a email on my phone that has pictures not from someones photo album and i foward the email the people get the email but not the picture. all they get is ca blank square where the picture should be. i even fowarded to myself and the samething happens on my mac . I have called teck support & was told they are working on it. this is unacceptable. it should not take this long to fix this.
imac Mac OS X (10.6.1)

Nokia 3110 Classic Messages not being sent

sent messages are being 'saved for sending' in outbox and not being sent. Message details give me a 'failed delivery' report. Any ideas?
Thanks
Solved!
Go to Solution.

Check if you have the right message centre number.
Messages sent by your phone are routed through your service provider's message center. Normally, this number is saved to your phone by your service provider. To save the number manually, do the following:
At the Start screen, press Menu 01-6 (Messages - Message settings).
"Text messages" is highlighted. Press Select.
"Sending profile" is highlighted. Press Select.
"Default profile" is highlighted. Press Select.
Scroll to "Message centre number" and press Select.
If the box in the display is empty, enter the number given by your service provider and press OK.
OR
If the box in the display is full, edit the number only if you are sure the number is incorrect, or you want to change the number, and press OK.
A message appears in the display that confirms your number is saved.

EWA Report not being sent for two systems

Similar Messages

Maybe you are looking for