EWA report setting for SM7
Hi Guru,
I need your extreme help for configuring EWA report in SM7 system.
When i am trying to execute SDCCN tcode for gathering data in satellite system, job is not creating.
Can anybody help me into this?
Regards
Pranav
Hi Pranay,
I haven't got solman here up ands running due to hardware problems but see if this helps, trying to remember on top of my head so apologies for any confusion.
Goto into the remote system you are collecting EWA data from and go into SDCCN and i think its user defined tasks under one of the menus and sub menus. make sure there are 2 entries. one for connection to SAP think its SAP_OSS and there should be another one for Solman. You need to tell the satellite system that this is your master system for solman and i hope that this will send EWA data to solman. Solman will display a collection of data and it will use this to compile a word document provided you are up to date with support packs, otherwise the word document will not be filled in properly.
also make sure that you have set a EWA schedule in solution_manager transaction for your system landscape containing your satellite system.
if you are stuck then i will see if my solman is able to run and i will provide a detailed view of what i did to get it working
hope it helps for now
Mani
Similar Messages
-
Grey (blank) EWA reports generated for Portal systems
I am attempting to set up EWA reports for J2EE systems. At this stage despite all efforts I continue to get grey rated (blank) reports generated for our Portal systems.
As far as I can tell all required components are installed correctly (Wily, SMD server, SMD agents etc).
This problem seems to be restricted to our Portal systems as report data is being generated for our XI J2EE engines with the same SMD components installed.
CGA collection jobs are running successfully against the managed Portal systems, and I have attempted to manually generate reports via transaction DSA in the Solution Manager system, using an uploaded service data xml file generated with the SMD/services utility. This also results in a blank report.
Our systems comprise the following components:
Wily v7.1
SMD 13 on Solution Manager and managed systems
Solution Manager 4.0 SP13: (ABAP):
SAP_ABA 700 0013 SAPKA70013
SAP_BASIS 700 0013 SAPKB70013
ST-PI 2005_1_700 0006 SAPKITLQI6
PI_BASIS 2005_1_700 0013 SAPKIPYJ7D
SAP_BW 700 0015 SAPKW70015
SAP_AP 700 0009 SAPKNA7009
BBPCRM 500 0009 SAPKU50009
CPRXRPM 400 0010 SAPK-40010INCPRXRPM
ST 400 0013 SAPKITL423
BI_CONT 703 0008 SAPKIBIIP8
ST-A/PI 01K_CRM560 0000 -
ST-ICO 150_700 0011 SAPK-1507BINSTPL
ST-SER 700_2006_2 0004 SAPKITLOK4
Solution Manager (J2EE):
sap.com SAP_JTECHF 7.00 SP13 (1000.7.00.13.0.20070812015644)
sap.com ISAGENT 7.00 SP13 (1000.7.00.14.0.20070927052333)
sap.com SAP-JEE 7.00 SP13 (1000.7.00.13.0.20070812015311)
sap.com SAP-JEECOR 7.00 SP13 (1000.7.00.13.0.20070907082334)
sap.com BASETABLES 7.00 SP13 (1000.7.00.13.0.20070812013638)
sap.com CORE-TOOLS 7.00 SP13 (1000.7.00.13.0.20070812014121)
sap.com JLOGVIEW 7.00 SP13 (1000.7.00.13.0.20070812001600)
sap.com JSPM 7.00 SP13 (1000.7.00.13.0.20070812001700)
sap.com CAF 7.00 SP13 (1000.7.00.13.0.20070809092315)
sap.com UMEADMIN 7.00 SP13 (1000.7.00.13.0.20070809093947)
sap.com ADSSAP 7.00 SP13 (1000.7.00.13.0.20070812011854)
sap.com BI_MMR 7.00 SP13 (1000.7.00.13.0.20070812013749)
sap.com CAF-UM 7.00 SP13 (1000.7.00.13.0.20070809092324)
sap.com KM-KW_JIKS 7.00 SP13 (1000.7.00.13.0.20070812014519)
sap.com SAP_JTECHS 7.00 SP13 (1000.7.00.13.0.20070812015951)
sap.com BI_UDI 7.00 SP13 (1000.7.00.13.0.20070811190400)
sap.com LM-SERVICE 7.00 SP13 (1000.7.00.13.0.20070812001200)
sap.com LM-TOOLS 7.00 SP13 (1000.7.00.13.0.20070906104634)
Among many, many others, the following notes and documentation has been followed:
976054 Availability of EWA for Non ABAP components
1010428 End-to-End Diagnostics
762969 - Grey rating for Earywatch Report
EWA guide for NON-ABAB components
SAP Solution Manager 4.0 End-to-End Root Cause Analysis Installation Guide
762969 - Grey rating for Earywatch Report
And of course all the Wily & SMD installation guides.
Please let me know if there is any other information required. I'm posting this in the hopes that someone else has had this problem and has been able to resolve it. I have read though what seems like hundreds of threads on SMD setup problems, however not many that describe the problem I'm having exactly.
Many thanks in advace.
TimHi Stephan,
You're on the right track! When I try manually generate reports for our XI systems via uploaded service data, I only get valid report data if I generate report with graphics - otherwise the report is blank.
Alas with the Portal systems, I get no report data either way.
The XML storage table does contain data (with XI & Portal systems) - so comms with the J2EE is working.
Thanks for your help.
Tim -
Parameter event - to be set according to EWA report
Good day fellas,
I have a problem on my EWA report :
event 10027 trace name context forever, level 1
10028 trace name context forever, level 1
10142 trace name context forever, level 1
10183 trace name context forever, level 1
10411 trace name context forever, level 1
10629 trace name context forever, level 32
14532 trace name context forever, level 1
38068 trace name context forever, level 100
38085 trace name context forever, level 1
38087 trace name context forever, level 1
44951 trace name context forever, level 1024
10191 trace name context forever, level 1
10753 trace name context forever, level 2
10191 trace name context forever, level 1
10091 trace name context forever, level 1
and a bit below:
The following table lists events we found to be activated in your system, but which should only be activated in special circumstances. Please check whether there are special reasons to set these events. If they are no longer needed, they should be removed.
Event
10091
How can I check these special circumstances and if this parameter is needed ?
Thanks in advance,Hi deepakkori.
The parameter is already defined in initSID.ora:
*.event='10027 trace name context forever, level 1','10028 trace name context forever, level 1','10142 trace name context forever, level 1','10183 trace name context forever, le
vel 1','10411 trace name context forever, level 1','10629 trace name context forever, level 32','14532 trace name context forever, level 1','38068 trace name context forever, le
vel 100','38085 trace name context forever, level 1','38087 trace name context forever, level 1','44951 trace name context forever, level 1024','10191 trace name context forever
, level 1','10753 trace name context forever, level 2','10191 trace name context forever, level 1','10091 trace name context forever, level 1'
and they do not recommned any SAP note. These are the only things recommended in EWA:
Parameter EVENT
To provide special functionality or control system behavior, Oracle has a number of events. These can be activated in the configuration file and/or dynamically in the server manager or sqlplus.
In general, these events and parameters should be activated on request only. When they are no longer needed, they should be removed. However, it might be necessary to activate some events during normal database operation.
The following table displays the values for the parameter "event" as
found in your system:
Parameter Current Value
event 10027 trace name context forever, level 1
10028 trace name context forever, level 1
10142 trace name context forever, level 1
10183 trace name context forever, level 1
10411 trace name context forever, level 1
10629 trace name context forever, level 32
14532 trace name context forever, level 1
38068 trace name context forever, level 100
38085 trace name context forever, level 1
38087 trace name context forever, level 1
44951 trace name context forever, level 1024
10191 trace name context forever, level 1
10753 trace name context forever, level 2
10191 trace name context forever, level 1
10091 trace name context forever, level 1
The following table lists events we found to be activated in your system, but which should only be activated in special circumstances. Please check whether there are special reasons to set these events. If they are no longer needed, they should be removed.
Event
10091
So I am not sure, how to check if I should remove this 10091 or leave it there. What is that special case that this parameter needs to be present ?
Any idea ?
thanks in advance, -
EWA report for non-abap systems
Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
VirgilioHi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram -
Configuration of EWA reports for java systems.
Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks -
EWA Report for DEV/QAS System (if possible)
Hi Experts,
I would like to know if it is possible to generate EWA reports for DEV/QAS Systems. I believe i have set up all the necessary RFCs for our SOLMAN to communicate with the DEV/QAS systems.
When I try to create an EWA session in SDCCN of the DEV/QAS system, the only destination i can choose is "NONE" which is local.
Any idea how I can send this to my SOLMAN. My SOLMAN is already configured to be the master system of my DEV/QAS system.
Any help would be appreciated.
Thanks.Hi Prince Jose,
My problem actually is that I want to set up EWA for a DEV system. I have tested all the RFC connections to and from my SOLMAN.
Even the RFC connection in SDCCN -> Settings .. -> RFC destination, i have 2, one SAP_OSS and my 'back' RFC to my SOLMAN and everything is working OK.
Would you be able to give me a step by step guide on how to setup EWA. From what i know:
1. Setup the system via SMSY (done)
2. Generate the necessary RFCs (done and tested OK)
3. Set SOLMAN as the master system of the satellite systems (done)
4. Create the necessary task for EWA via SDCCN of satellite system
Are the steps correct?
Thanks -
Can thresholds change for EWA-Report ??
Hi All,
Is it possible to change the thresholds for EWA report in solution manager??
Regards,
NeniHi,
The EWA/SLR adjusts its reported KPIs according to the product it
detects. See SAP Note 721643 for a list of KPIs/Products.
According to this, the SLR follows the EWA and stops collecting the
R/3 related KPIs. They will stay in the report until they run out of
the reported time frame of 12 months. There is no way to delete these
manually in an easy way without loosing all other KPI histories as well.
As reported in the note 721643, the missing KPI's cannot be collected
anymore.
Next level support have provided the following information about getting
this information:
There is something similar using the Central Performance History (CPH)
from CCMS. Customer could collect the Dialog Reponse Times per instance
but there is no node in CCMS for the complete System.
It is not exactly like KPIs, but it is the only possibility we can offer
you. I have attached a screenshot of and example so that you can check.
For details about setting up CPH wihtin SLR please see following note:
872569- Central Performance History and SL Reporting
Hope this helps.
Cheers
SH -
Hello,
On client demand, we need to change sender of the EWA reports ( currently it is being emailed from my user id ) .
We changed user name for SCOT job but we are not able to change sender.
Can you please let me know how to change sender of EWA report.
Best Regards,
TusharTushar,
Were you able to achieve this. The SM:EXEC SERVICES job and the SCOT job are currently run by user ID: XYZ and the the EWA
is set up by the user ID XYZ.
I changed the following:
Deleted SM:EXEC SERVICES and the SCOT job and recreated them to be run by user ID ABC (the one I want to change to).
It still uses XYZ as the sender (not ABC) because as the configuration is set up by user XYZ, it is creating SM:EXEC SERVICES
on the fly to be run by user ID XYZ.
Please let me know what I am missing. What else need to be changed ? Thanks.
Ravi -
2 EWA reports for 1 system?
Hello,
We got ECC and BW in the same system, with different clients number - and we got one EWA report every monday that cover both clients.
Is there any way that I can set up EWA reporting so I got one EWA Report for my ECC client, and one other one for my BW client?
Best Regards,
Karl Yngve AndersenMaybe you can do this with 2 solutions.
Transaction SMSY_SETUP or dswp.
Edited by: Nico Effenberger on Oct 20, 2008 1:41 PM -
Can I set up a Master-Detail Page with report regions for 2 Detail Tables?
Hi there,
I am just starting to use Application Express.
I have a Table (A) with Master-Detail relationships to two Tables B & C.
I can set up a Master-Detail Page between Table A and Table B, where the records displayed in Table B change when switching between records in Table A. I would like to add Table C to the page and for this to work in the same way.
Is this possible in APEX? (I've tried adding a report region for Table C and making the Region Source dependent on the same ID field as is used by the report region for Table B but I keep getting "No Data Found" for Table C).
Many thanks.Thanks, but the text needs to be on a single master page which every page is assigned to. This is so the text alternates correctly regardless of whether new pages are inserted or moved. If I assigned separate master pages to individual pages and then moved the pages to a different location, the alternating footer text would then fall out of sync. I hope that made sense!
-
Change the default setting for report painter reports.
HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
VenuHI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal -
Dear Experts,
We have installed Solution Manager 4.0 with latest Patch Level.
We also have BI 7.0 and ECC 6.0 Systems in Landscape.
Requirement :
I have to generate <b>Early Watch Reports</b> for the both BI & ECC systems in our Solution Manager.
Please Let me know the configuration & steps for integration and to generate EWA's for the systems on a weekly BASIS.
Blogs / Links / Guides are highly appreciated.
Thanks in Advance to all SOlution Manager Experts.
Regards
PRhi,
Please check these. It will solve your problem.
https://websmp206.sap-ag.de/~sapidb/011000358700006819072005E
https://websmp206.sap-ag.de/~sapidb/011000358700006936042005E.sim
https://websmp206.sap-ag.de/~sapidb/011000358700005011442004E
https://websmp206.sap-ag.de/~sapidb/011000358700008968942004E.sim
https://websmp206.sap-ag.de/~sapidb/011000358700001581372005E.sim
/people/federico.babelis2/blog/2006/04/23/sdcc--service-data-control-center-configuration-guide-for-dummies
Feel free to revert back.
--Ragu -
EWA reports for non abap systems
Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir -
ECCS 6 CONSOLIDATION SET FOR REPORT PAINTER
Hi
I am configuring the Report Painter for the reports on ECCS consolidation. In the T CODE CXSA creating sets there is concept of formual.
Ecaxtly what i want is that, i want to spilt the value of a FS ITEM into 2 Account Group at the rate of 60% and 40%.
and for that i want to us Formula in the creation of Sets. Can anyone please tell me how this formual works.
Thanks & Regards
KrishHi
In a report painter report - Once you have created a SET means you know for what values you want to execute the report...
In your form definition, you will see two check boxes beside your characteristic - i.e. One for Defining a variable for the char and the Other for using a SET..
If you want to use a variable - this means you would specify the values of the projects at the time of execution... For this, click on the relevant check box and you can specify any name in the field "Local Variable"
If you want to use a SET, this means you know for what projects you would like to see the report.. For this, check on the relevant check box and specify your SET there...
If you want to use both the above options, then you must create your set from GS11 and choose the radio button SET VARIABLE
Refer the set 1KOSET from GS13 as a sample...
And see report 1SIP-001 under library 1VK in GRR3.. This report uses 1KOSET under General Data Selection.... You will get an idea for what you want
Regards
Ajay M -
EWA Reporting for NONSAP Systems
Hi all,
we need an EWA reporting for NONSAP systems. Is it possible to generate EWA Reports containing OS information (like CPU Utilization, Memory consumption, Filesystems ...) from the monitored systems.
If possible , are there any "How to guides" for implementing the NONSAP system in SMSY.
Thanks in advance for your help.
Regards
Anton BrehmHello,
I would refere you to SAP Note 1257308 - FAQ: Using EarlyWatch Alerts
If you look at section 1. Products and components for whcih teh EarlyWatch Alert is Available, the answer to your question is there, and states the products under section 1.1 and the components under section 1.2.
This should clarify the answer for you.
Regards,
Paul
Maybe you are looking for
-
Hi! I'm looking for a function that works as MB5B, I need to calculate the stock on posting date, I used the debugger, but I couldn't find a function. Thanks!
-
How do I set up a multipoint TP with Jabber as 1 endpoint?
I'm trying to set up a multipoint TP where I'll be one of the endpoints - how do I do this? I tried to set up a scheduled video bridge to get a manual bridge that I can dial into, but it's asking for at least 1 Tandberg endpoint, which I don't
-
Transfer files from one directory to another using HTTPS message protocol
My client has an requirement where the source files are in different directory and they need to be placed in a target directory with the same filename..it looked simple so far... but the actual complexity is that the source files are on a Novell serv
-
Error posting incoming payments (f-28)
Hello SAP Gurus, When trying to post a customer payment I keep getting the following error message " The trading partner entered in account xxxxx cocdxx is not valid. Any ideas? Many Thanks
-
Print receipt of purchased items
Hi, With all of the e-Commerce sites like Amazon, and all of the retail dot coms you can always log into your account and print or reprint a purchase. Why is it we cannot do this in the iTunes store? Gary