EWA Reporting for NONSAP Systems

Hi all,
we need an EWA reporting for NONSAP systems. Is it possible to generate EWA Reports containing OS information (like CPU Utilization, Memory consumption, Filesystems ...) from the monitored systems.
If possible , are there any "How to guides" for implementing the NONSAP system in SMSY.
Thanks in advance for your help.
Regards
Anton Brehm

Hello,
I would refere you to SAP Note 1257308 - FAQ: Using EarlyWatch Alerts
If you look at section 1. Products and components for whcih teh EarlyWatch Alert is Available, the answer to your question is there, and states the products under section 1.1 and the components under section 1.2.
This should clarify the answer for you.
Regards,
Paul

Similar Messages

Config in Sol Mgr 4.0 for EWA reports for NW2004s Systems??????????

Dear Experts,
We have installed Solution Manager 4.0 with latest Patch Level.
We also have BI 7.0 and ECC 6.0 Systems in Landscape.
Requirement :
I have to generate <b>Early Watch Reports</b> for the both BI & ECC systems in our Solution Manager.
Please Let me know the configuration & steps for integration and to generate EWA's for the systems on a weekly BASIS.
Blogs / Links / Guides are highly appreciated.
Thanks in Advance to all SOlution Manager Experts.
Regards
PR

hi,
Please check these. It will solve your problem.
https://websmp206.sap-ag.de/~sapidb/011000358700006819072005E
https://websmp206.sap-ag.de/~sapidb/011000358700006936042005E.sim
https://websmp206.sap-ag.de/~sapidb/011000358700005011442004E
https://websmp206.sap-ag.de/~sapidb/011000358700008968942004E.sim
https://websmp206.sap-ag.de/~sapidb/011000358700001581372005E.sim
/people/federico.babelis2/blog/2006/04/23/sdcc--service-data-control-center-configuration-guide-for-dummies
Feel free to revert back.
--Ragu

Configuration of EWA reports for java systems.

Hello,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD and assigned Logical component to java system.
So far, so good according to manuals but when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system.
I can see only the hosts (scheduler tasks ) of all abap system for which the EWA reports have already been generated.
Am i missing something?
Some configuration in SMD?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system NW 7.0 EP, SPS 6 (planning to SPS 19)
Thank you for your advices!!!

Hi Suveer,
I did the configuration before. I forgot to mention it.
I found this errors in Diagnostic Setup, maybe this could be the cause of the issue.
Step BI Details
Cannot invoke CCMSBISETUP on host localhost
!! Exception : An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.(cause=com.sap.sup.admin.abap.rfc.exception.RfcExecutionException The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!)
Exceptions
com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of this function 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC'.
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:92)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:743)
at com.sap.sup.admin.setup.AbapSysRfcAdapter.setupBIConfiguration_ccmsBiSetup(AbapSysRfcAdapter.java:727)
at com.sap.sup.admin.setup.ManagingServices.startCcmsBiSetup(ManagingServices.java:2686)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:334)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: The function named 'CCMSBI_RUN_SIMPLE_SETUP_IN_BTC' doesn't exist!
at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:62)
... 37 more
And also this one>>
Step RFC Details
Failed to create TCP/IP RFC on ABAP side (SM59)
!! Exception : Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
Exceptions
com.sap.aii.proxy.framework.core.BaseProxyException: Source system cannot be set to Unicode , error key: RFC_ERROR_SYSTEM_FAILURE
at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
at com.sap.sup.admin.setup.abapproxy.tcpiprfc.TcpIpRfcProxy_PortType.inst_Create_Tcpip_Rfcdest(TcpIpRfcProxy_PortType.java:16)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:663)
at com.sap.sup.admin.setup.ManagingServices.createTcpIpRFC(ManagingServices.java:637)
at com.sap.sup.admin.setup.SetupStep.execute(SetupStep.java:300)
at com.sap.smd.agent.plugins.remotesetup.SapInstance.setup(SapInstance.java:304)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.setupSMDServer(ConfirmationView.java:378)
at com.sap.sup.admin.setup.wizard.monitoring.ConfirmationView.onActionSetupServer(ConfirmationView.java:211)
at com.sap.sup.admin.setup.wizard.monitoring.wdp.InternalConfirmationView.wdInvokeEventHandler(InternalConfirmationView.java:278)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
And in the troubleshooting setup for managed systems, i can see that no initial upload was found form the SMD agent which is running on Java System.
Thanks a lot for your remarks

2 EWA reports for 1 system?

Hello,
We got ECC and BW in the same system, with different clients number - and we got one EWA report every monday that cover both clients.
Is there any way that I can set up EWA reporting so I got one EWA Report for my ECC client, and one other one for my BW client?
Best Regards,
Karl Yngve Andersen

Maybe you can do this with 2 solutions.
Transaction SMSY_SETUP or dswp.
Edited by: Nico Effenberger on Oct 20, 2008 1:41 PM

EWA reports for SAP Content Server

Hi
I have installed the SAP Content Server 6.40 on Solaris and MaxDB but my client want to configure EWA for SAP Content Server.
As per Content Server for EWA reports need to be configuring only Database and OS.
Kindly suggest me what are the steps need to be performed to setup the EWA for Content Server.
Regards,
Panu

Hi There
In order to have EWA report for any system you need to meet some prerequisit , for detail please refer to
this link below..
http://service.sap.com/EWA >> Media Library
Best Regards
Jai Wardhan

EWA reports for non abap systems

Hello gurus,
I am facing a problem with configuration of EWA reports for SAP NW Portal.
I have already configured EWA for abap systems, and those are running good on weekly basis. but i have problem with configuration of reports for java systems.
So far, i have installed an SMD agent and CA on my EP-satellite system. I have also configured and SMD server on my Sollution Manager and registered the SMD agent on SMD server and installed Willy Introscope on SMD server.
I am using a central SLD which is running on different host as Solution Manager. I did all the configuration (smsy_setup, configuration of sld_data_supplier etc... )
I have also created the system in SMSY, matched the smsy with SLD (data source SLd)and assigned Logical component to java system.
>>> But when i want do define data collection in the SMD for Gargage Collection (task in scheduler) i cannot see host of my portal system in the SMD.
In the SMD i can see just the abap systems for which the EWA are being already generated.
(i have done also configuration>>connecting managed sytem to the SMD, but i still cannot connect my Portal system to SMD)
Do you have any idea, what i have done wrong?
My solution manager is running on Sap NW 7.0, SPS16,
Sattelite system , EP SPS 19
Thank you very much for your points!!

Hello Jagan,
I was following the enclosed guide from the note: 976054, but it doesn't help to solve my issue.
And when i want to permorm the setup for the managed systems,(http://<host><port>/smd -> diagnostic setup->managed systems ->setup wizard) i can not see there my Portal systems, just the abap systems.
Do you have any idea?
Thanks,
Best regards
Slavomir

EWA report for non-abap systems

Hi Gurus,
Good day.
I would like to ask, what are the steps that I'm going to do when configuring an EWA report for non-abap systems i.e portal. Do Ineed to install SMD agents on my non-abap systems and connect to diagnostic agent of solman?
Or do I need to install wily introscope agents on my non-abap systems and connect to diagnostic agent?
It is both? Which one?
It would be also great if you can provide me links/documents in relation to my queries.
Please do note that the current version of solman system is 7.1
Thanks in advance for the help
Virgilio

Hi Virgilio,
To generate an EWA report for Java stack system,
you need to do following:
1. install smd agent (diagnostics agent) on Java stack system
you can install this agent standalone, details see note 1234384.
The installation Guide is also attached in note 1234384.
2. finish Initial Config and Basic Configuration in solman_setup for
solman system, the setting about Enterprise Manager is also included
in these configurations, please ensure EM is running properly.
3. start managed system configuration for the EP system in solman_setup
after selecting the system type 'Java', please finish all steps as
suggested in which step. The Step 'Wily Introscope Configuration' is to
install Introscope Agent which is used for Java stack system. More infor
please read the installation Guide of Enterprise Manager and note
797147.
4. You should be able to see data in Wily Introscope and Workload
analysis via
Root Cause Analysis->End-to-End Analysis->select the system->Workload
Analysis
5. If the EP system is added in a solution, the EWA task for this system
should be shown up in solman's SDCCN.
Also check note: 976054"
Thanks
Regards,
Vikram

EWA Report for DEV/QAS System (if possible)

Hi Experts,
I would like to know if it is possible to generate EWA reports for DEV/QAS Systems. I believe i have set up all the necessary RFCs for our SOLMAN to communicate with the DEV/QAS systems.
When I try to create an EWA session in SDCCN of the DEV/QAS system, the only destination i can choose is "NONE" which is local.
Any idea how I can send this to my SOLMAN. My SOLMAN is already configured to be the master system of my DEV/QAS system.
Any help would be appreciated.
Thanks.

Hi Prince Jose,
My problem actually is that I want to set up EWA for a DEV system. I have tested all the RFC connections to and from my SOLMAN.
Even the RFC connection in SDCCN -> Settings .. -> RFC destination, i have 2, one SAP_OSS and my 'back' RFC to my SOLMAN and everything is working OK.
Would you be able to give me a step by step guide on how to setup EWA. From what i know:
1. Setup the system via SMSY (done)
2. Generate the necessary RFCs (done and tested OK)
3. Set SOLMAN as the master system of the satellite systems (done)
4. Create the necessary task for EWA via SDCCN of satellite system
Are the steps correct?
Thanks

EWA alert report for java system shows wrong data

Hi,
In our solman system, EWA alert reports are configured every week for all the production systems (both ABAP and JAVA). Recently oracle database was upgraded from 10g to 11g in all the production systems. The EWA alert report for ABAP systems is correctly taking the 11g database details and is suggesting parameter changes. Unforunately the EWA alert report for Java systems is still pointing to 10g database and is suggesting the parameter changes for 10g only but the systems are on 11g.
In SMSY, the database of the java systems is maintained as 11g only and not 10g. STill we are not sure where the data is being fetched from.
Please help me in finding the issue.
Regards,
Ragav

Hello,
iNote 1482818 would be iapplicable if not java checks are being made. You are not reporting no java checks, you are reportijng the check is being performed, but has the wrong value. When you updated the database dis you perform Solman_setup, Mnaaged system setup?
The reason I ask s that is what prepares the java side for EWA. For isntance if you had on old version of ST-SER such as 700_2008_2 then it does not know about Oracle 11.2....but that is on the ABAP side, you would need ST-SEr 701_2010_1 to
recognize ORacle 11.2 on the ABAP side.
So while I am not 100% sure in this specific instance, it seems logical that if the Java side isn't recognizing the Oracle Database version ( which means it is making this check) then you may need to run the Solman_setup, Mnaged system setup to pick up the ability to detect a new version of Oracel on the Java side.
It is certainly worth the try.
Regards,
Paul

EWA Generating for EHP4 Systems

Hi,
I had generated EWA Reports successfully for ECC6.0,ECC5.0 Systems.
Now iam configuraing EWA Report for EHP4-SP04 sytems,i did all the settings in solution manager,when iam ruiing RTCCTOOL in satelite System iam getting below warning.Is this creating any problem to generate report.
Setup of the EarlyWatch Alert service
[ checks that min. 2 EWAlert sessions to SAP Solution Manager or to SAP
are found in last 60 days, and that SDCC session manager job runs ]
We recommend that SAP Solution Manager be used to monitor your systems
via Earlywatch Alert. In this case you activate it just by including
a system into a Solution Landscape. See the note 1257308 . If this is
not possible, data for productive systems can be processed at SAP.
In SDCCN when iam creating maintenace package,refresh sessions after finishing successfully disappearing from screen,not generating any early watch alerts.Guide me for the same.
Thanku,

Okay. Hmmm...
Than I would query the EarlyWatch of the Satelite System over the Solman.
Logon to your Solman.
Navigate to the Solution in which the Satelite System was created.
Operations -> Solution Monitoring -> Early Watch Alert
Scroll down to the next Early Watch for your system in the future and click on it.
Change the Date of the Early Watch to the current day and time and run the suggested Job in the Solution Manager.
After the job is finished (control it via SM37), there should be a Early Watch Task in SDCCN of the Satelite System.
Best Regards
Tobias

Add web element in Crystal report for SAP system

Hi all,
I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
But if I add the webelement for Excel sheet ,It shows the control.
How can I add web element for SAP System? Can't we use web controls in SAP system ?
Help me in this regard.

Hi All,
i have the same issue on crystal report add-ins. Have you able to solve this without upgrading our sap business one to the latest version or patch level? Please see details below.
OS: MS Windows 7 SP1
SAP Business One 8.82 pl7
Crystal report 2011
Crystal report integration package installed under B1_SHare/Client
But still the problem persist on the workstation.
Please help me solve this problem.
Thank you,
ana

Report for Project System

Hi Experts,
would anyone know of any reports that allows me to view the cost element by the rows, base on the WBS that i enter. For standard report, S_ALR_87013543, they list the cost element by each row, i am trying to find a report that shows the cost element by the column with the WBS in the row. Is there such a report? Please assist <removed_by_moderator>
*Read the "Rules of Engagement"
Edited by: Juan Reyes on Apr 6, 2011 4:07 PM

Hi,
If I have understood your query correctly...
You can use CJI3,CJI5,CJI4 reports instead of S_ALR_87013543.
or run S_ALR_87013543 & use call up report(F7) feature to get CE & WBS.
Regards,
Sl

Standard Report for Project System

Hello,
Is there a standrard report that i can find that will report by cost center the direct and indirect hours worked by an employee for a period Monthly and Year to Date.
I am also working on a stadnrad report KSB1 and i want to add a new field to the layout that is not existint in there. What report is KSB1 is it a report writer report that i can modify or will it be an ABABP customization.
Thanks.
R

Hi.
I think you are looking for transaction CATC.
You only can add those fields to the layout that are offered. KSB1 is a standard report that you rather not modify. Best you take a copy and change the copy to a Z. ABAP would be required.
Cheers!

RFC connection for nonSAP system

Hi all
i want to send and receive data from b/w SAP and NON-SAP systems. plz tell me which type of RFC connection i will use.
Regard
Imran Khan

Imran,
Check the attached link.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a]
Manoj

EWA reports for EP 7.0

Hi All,
When i tried to navigate to the page http://hostname:5<no>00/smd using the user id smd_admin i cannot see the tabs diagnostics administration and root cause anaylsis.
How can we launch the same from solman_workcenter.
SAP_SMWORK* roles have been added to the user.But still the problem persists.Any pointers.Thanks.

in SOlman_Work center we can see the root cause analysis tab.But we cannot see the same in smd.
SAP_ABA     701     0006     SAPKA70106     Cross-Application Component
SAP_BASIS     701     0006     SAPKB70106     SAP Basis Component
PI_BASIS     701     0006     SAPK-70106INPIBASIS     Basis Plug-In
ST-PI     2008_1_700     0002     SAPKITLRD2     SAP Solution Tools Plug-In

EWA Reporting for NONSAP Systems

Similar Messages

Maybe you are looking for