EWA session not created after refresh_session in SDCCN
Hi All,
I have configured EWA in our SolMan 7.1 for our managed system SAP BW 7.0, and to test it, I've been trying to create an adhoc EWA report manually. However, after the completion of refresh_session tasks in the managed system's SDCCN, no EWA session is being created.
I have already followed instructions in SAP Note 1769513 - EWA not generated - session data is overdue (red flag status), but I'm still stuck with this error.
Please advise.
Thanks.
Hi,
You are using solution manager 7.1, so here are couple on KBAs which can help you to get the EWAs.
1907383 - How to setup and troubleshoot EarlyWatch Alert reports in SAP Solution Manager 7.1
1924199 - EarlyWatch Alert Management SP10+
Also follow the recommendations of RTCCTOOL.
To generate an Ad-hoc EWA, yo can look into this wiki.
How to create an Ad Hoc EWA report in Solution Manager 7.1 - Solution Manager - SCN Wiki
Further, to understand and troubleshoot, please read the EWA workflow
The EWA workflow - a closer look - Solution Manager - SCN Wiki
I hope, all this should help you in fixing your issue.
Regards
Similar Messages
-
MIGO should not create after PO Delivery Date
Hi,
We have a PO with multiple line items and diff. Delivery Dates...
We want that during MIGO Process, Posting Date should not exceed to PO Delivery Date.
Means, if PO Delivery Date is 05.07.2014, then MIGO should not created after this date...
Please suggest.If you want to achieve the scenario with standard settings, then you can use the field "Latest GR date".
Just put the same date as delivery date in this field. Then system will not allow to do GR if the Posting date is exceed with compare this date in MIGO.
You can find the latest GR date in Delivery tab in PO. Also you can maintain the field as mandatory in PO to avoid the field value blank as per your requirement.
Also if you want to change Latest GR date along with delivery date, just take the steps which is explained in this document Mass changes from one field to another field.
**Edited by: Dëv Päträ -
Hi, experts
Sometimes after I did goods receipt with MIGO for purchsing order, the TR was not created by system. Normally after MIGO system create material document and TR at same time, then I use LT06 with reference the document no. place it to the storage bin.
But for this case, no TR generaged. I can only use LT10 /mvt999 to move them to the storage bin.
Can you please tell me the possible reason for this problem( TR not created)?Can you please check what is the movement type being used ? If you were able to use LT06 in some cases means that most probably 101 is correctly defined in LE--> Interfaces --> Movement types to trigger the TR's.
1) however, if you are using / different movement type is being triggered and is not set up to create the TR.
2) If you see that the movement type is still 101, you could still be creating the TR's in the background, however, if you have a background job or some other transaction that is confirming the open TR's , this could be one of the reasons why you are not able to use LT06.
For this you can go to MIGO ( go to display tab for material document) , go to WM tab and find out the TR # there.
You can then go to LB03 and if you scroll to the right , you will find the TO # created.
Please go to LT21 and check who and how the TO is being created / confirmed, if thats something out of the process for you.
Thanks -
PR not created after creating 3rd Party Sales Order
Hi SAP,
We have 3rd Party Sales Order process. The Problem is, PR number is not generate after creating 3rd Party Sales Order.
the problem happen for particular customer only. I already check the credit limit and its okay.
need help,If the PR is not getting created, please click on the Incompletion log in the SO to check for any missing data.
If it is complete use VKM3 transaction to check if the SO needs a credit release., if needed relase the SO and the PR will get generated.
Check if the material is maintained for purchasing or not. -
PO not created after complete Approval of SC.
Hi Experts,
I am working with classic scenario with SRM 7.0.
I have an issue related to creation of PO at backend.
After complete approval of SC PO is not created in backend. The status of SC is showing as Approved.
There is no error in RZ20 or Application monitor.
Can you give some touch points where can I find some errors or reason for this.
Where can I check the PO create BAPI is called on approval of SC.
Please help me in this regard.
Regards,
B.N.KarthiHi
go to your BBP_PD
click item data
and search for your PO ?
you must have PO there ?
or check ANY ENTRY IN BBP_DOCUEMNT_TAB
Do YOU have valid source of supply?
E_OBJECT_ID-BBP_PDBEI - WHAT IS THER INSIDE?
As laurent staed below, you must check item status too :- it could be purchaser work list too or error in process or can not be ordered...
Muthu -
COPA DOCUMENT NOT CREATED AFTER BILLING
HI
COPA document is not created while doing the sale order cycle
Ive carried a standard sales cycle that contains sales order (VA01),
Delivery (VL01n) and billing document (VF01). System should generate 4
documents as follows
1) FI Document
2) CO Document
3) Profit Center Accounting Document
4) COPA Document
But in my case only 3 documents are generated instead of COPA.
I completed the total COPA configuration with creation of operating concern and assigned SD condition types. And also maintained number range for actual copa line items.
Fllowing things are done.
1) assignment of controlling area to Operating concern .
2) controlling area setting activate profitability analysis.
3)Valuation Strategies are assigned to the Points of Valuation in ke4u.
4)SD Quantity Field to a COPA Quantity Field (Normally FKIMG assigned to ABSMG).
when we excute the transcation KE4S system display the error Document "XXXXXXXXXX" is not profit-related and thus could not be transferred.
when we go back to the Billing Document in the Change mode, click on the PSG button in Account Assignment it is showing some characterstics also.Hi
I have already mentioned in my pervious mail what the activities done by me. Quantity filed are already assign KE4M.Please do needful for me and give me suitable answer. -
MP Related Logs and IIS Virtual directory not created After re_installation of SCCM 2007
Hi
We have re-installed the IIS and SCCM secondary site. tried to intsall the MP role and DP role but it has not created any logs or IIS virtual directory in the secondary site server which is in WAN link.
Trouble shooting:
- checked the ports 443,445 and 80
- Disabled symantec
- exchanged the public key ( still it is in progress in Despooler log)
- checked the site to site permission and added the accounts.
please suggest further.Yes, I know this is an old post, but I’m trying to clean them up.
What error(s) are you getting within the logs? Without these details there isn’t much anyone can do to help you.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Hello SAP Gurus!
We are having a problem regarding PR creation.
No PR is created after running MRP and we have a lot of requirements.
What do you think is the problem?
How to check?
Thanks in advanceHi again,
Kindly let me know have you check these 3 steps below for you
1) Requirement Planning for the corresponding plant must be activated in customizing for material management under consumption based planning -
>Planning------>Activate Material Requirement Planning
2)The Plant parameters for the corresponding plant must be activated in customizing for material management under consumption based planning->Plant Parameters-->Carryout overall maintenance of plant parameters
3) In the material master record, you have to maintain the MRP data of the materials that are subject to automatic plannning
Viz , MRP TYPE, MRP GROUP...Etc
If tthe above steps are ok then check the material master record of material of which MRP run is resulting in no Purchase requistion, Kindly check the MRP Views and see whether field of MRP Type is showing ND i.e. No Planning.
Change the same to consumption based planning and get your reults.
I hope this will solve your problem.
Regards,
Tushar Patankar -
Promotion Condition (VKA0) Not Created after activation
Hi
We currently activate promotions using WAK5 and WAK16. On WAK5 you can see the status of the sales price condition is set at B, however the VKA0 condition is not created.
In the process we perform supply source determination 45 days before the promotion start date (this is done for F&R) and we activate the promotion 5 days before the start date (this is done for our POS system)
What could be the cause of the VKA0 condition not being created?
RgdsHi Sush,
In that table where the path you indicate takes you, you just need to insert the following entries:
BIDDER
COLLAB
EVALUA
EXTERN
INTERN
Hope this will help you.
By the way, where are you implementing PPS?
Best regards,
André Sousa -
Sapdata3 has been not created after Sap Neatweaver 7.3
Hi Gurus,
I have done the installation for SAP Netweaver 7.3 Java stack with distributed option with oracle database .
However file system created is sapdata1,sapdata2 , and sapdata4 has been created but sapdata3 is not created .
can any one susggest.
Regards,
JeetendraHi Jeetendra,
Check whether you system is up and running ?
If yes, then sapdata3 is a folder created under /oracle/SID or /oracle based on your file system structure.
As right mentioned SAP installer will not create any file system. If file system /oracle/SID/sapdata3 is not available, SAP installer will create a folder sapdata3 under /oracle/SID and respective data files will be created under the same.
Hope this helps.
Regards,
Deepak Kori -
Knowledge modules files were not created after ODI installed
I installed ODI 10.1.3.5 on my Windows XP laptop and found that there are no Knowledge Module files in the directory ODI_HOME/oracledi/doc/km. Should these files be created after ODI installed or do we need to do something to create there KM files ? Appreciate if somebody can answer this ?
Thanks in advance,
RamHi Ram,
Are you talking about KM XML files ? If yes then these are located at ODI_HOME/oracledi/impexp
Under ODI_HOME\oracledi\doc\km you will get the PDF document about KM development guide .
Thanks,
Sutirtha -
Batch Input Session not created
I am looking in transaction SM37 and i see a background job with the status finished. This job create a batch input who update equipment via transaction IE02. When i look at the job log everything look fine. One line of the log show the QID number but nothing is available in transaction SM35. I have look directly in table APQI and there is nothing there.
Why this QID session have not been created in SM35?
Help required.
SAP version 4.6CIs this a custom program or standard SAP program that you ran in the background?
The reason for not seeing the session in SM35 could be that the program RDBDCSUB was called immediately after creating the session with the parameter XKEEP = SPACE. This parameter tells the system whether to keep the session even after it is processed successfully. So if your session is processed successfully, then it must have been deleted. Unfortunately, even the logs will be deleted. -
Automatic schedule lines not creating after MD03
HI Gurus,
When I am running MD03 system is creating Pur. Requisitions instead of Schedule lines
I am running with
NETCH
2
3
1
1
1
29102011
Data maintained
1.Material master /vendor master Auto po ticked (MRP type VB ROP 500 ,Safety stock 600, current stock 200)
2.Sch. Agreement created with LP (validity period, Qty ok)
3.Pur. Info rec maintained for vendor material for the plant.
4.Source list maintained with Vendor,scheduling agreement no ,item no, MRP indicator 2 Fixed vendor ticked
Now after Running MD03
Pur. Req created for 400 qty
but when I click on Procurement proposal manually I can select Del. Schedule and create
but system is asking Agreement no. item,qty etc (I already maintained Source list system is asking again )
Then why not system creating automatically..
Please help..
Thanks in advanceThanks Jürgen,
It was a problem of Date ,validity period of the SA.
which I sort out any way thank you. for your input -
PO not created after approval.
Hi
We are working on SRM4.0 classic scenario with SAP R/3 4.7.
We are having following scenarios to create backend docs.
1. All SC created from catalog should create PO in backend R/3.
2. All SC created using Free text description (All non catalog items) should generate PR in backend.
All PRs are getting generated perfectly as per point 2.
But the problem is with point 1 where PO is not getting generated in backend after approval is done.
As per my analysis, system is picking the PO number and object type perfectly. But all these records exists in BBP_DOCUMENT_TAB. Even after running CLEAN_REQREQ_UP also they are not going to backend.
In BBP_PD it shows I111 Item in transfer process with no check in inactive column.
No errors in SC monitor(RZ20).
I dont know where am I missing. Checked all possible things.
Did anyone faced such situation please throw some light on this.
Thanks in advance
JagadishJagdish
Not sure, try to run FM BBP_PD_PO_TRANSFER_EXEC...
Regards
Reddy -
Netlogon and SYSVOL shares are not created after DCPROMO in Windows 2012
Hi
When i run a dcpromo on my windows 2012 server (all dc's are windows 2012)
On the new domain controller i don't have sysvol or netlogon share.
All the sugestions i found in social refer to FRS but in server 2012 DFS is used, no idea how to troubel shoot this problem.
All dcdiag on all DC before promo where clean
dcidag on srv01 the new dc shows:
Doing initial required tests
Testing server: Bas\SRV01
Starting test: Connectivity
......................... SRV01 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
Starting test: FrsEvent
......................... SRV01 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV01 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV01 passed test SysVolCheck
Starting test: KccEvent
......................... SRV01 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV01 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV01 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV01 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SRV01\netlogon)
[SRV01] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SRV01 failed test NetLogons
Starting test: ObjectsReplicated
......................... SRV01 passed test ObjectsReplicated
Starting test: Replications
......................... SRV01 passed test Replications
Starting test: RidManager
......................... SRV01 passed test RidManager
Starting test: Services
......................... SRV01 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 21:55:22
Event String:
The WinRM service is not listening for WS-Management requests.
An error event occurred. EventID: 0x00001001
Time Generated: 02/26/2013 21:58:10
Event String:
The machine SRV01 attempted to join the domain dikkenberg.local but
failed. The error code was 1332.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:00:04
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x000727A5
Time Generated: 02/26/2013 22:08:43
Event String:
The WinRM service is not listening for WS-Management requests.
A warning event occurred. EventID: 0x0000008E
Time Generated: 02/26/2013 22:10:22
Event String:
The time service has stopped advertising as a time source because th
e local clock is not synchronized.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:24:05
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
......................... SRV01 failed test SystemLog
Starting test: VerifyReferences
......................... SRV01 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
C:\Users\administrator.DIKKENBERG>
Dcdiag on good dc:
Performing initial setup:
Trying to find home server...
Home Server = SRV09
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Bas\SRV09
Starting test: Connectivity
......................... SRV09 passed test Connectivity
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
Starting test: DFSREvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SRV09 passed test DFSREvent
Starting test: SysVolCheck
......................... SRV09 passed test SysVolCheck
Starting test: KccEvent
A warning event occurred. EventID: 0x80000B46
Time Generated: 02/26/2013 22:42:36
Event String:
The security of this directory server can be significantly enhanced
by configuring the server to reject SASL (Negotiate, Kerberos, NTLM, or Digest)
LDAP binds that do not request signing (integrity verification) and LDAP simple
binds that are performed on a cleartext (non-SSL/TLS-encrypted) connection. E
ven if no clients are using such binds, configuring the server to reject them wi
ll improve the security of this server.
......................... SRV09 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SRV09 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SRV09 passed test MachineAccount
Starting test: NCSecDesc
......................... SRV09 passed test NCSecDesc
Starting test: NetLogons
......................... SRV09 passed test NetLogons
Starting test: ObjectsReplicated
......................... SRV09 passed test ObjectsReplicated
Starting test: Replications
......................... SRV09 passed test Replications
Starting test: RidManager
......................... SRV09 passed test RidManager
Starting test: Services
......................... SRV09 passed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:13
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 21:57:14
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
A warning event occurred. EventID: 0x000016AF
Time Generated: 02/26/2013 22:34:50
Event String:
During the past 4.24 hours there have been 20 connections to this Do
main Controller from client machines whose IP addresses don't map to any of the
existing sites in the enterprise. Those clients, therefore, have undefined sites
and may connect to any Domain Controller including those that are in far distan
t locations from the clients. A client's site is determined by the mapping of it
s subnet to one of the existing sites. To move the above clients to one of the s
ites, please consider creating subnet object(s) covering the above IP addresses
with mapping to one of the existing sites. The names and IP addresses of the cl
ients in question have been logged on this computer in the following log file '%
SystemRoot%\debug\netlogon.log' and, potentially, in the log file '%SystemRoot%\
debug\netlogon.bak' created if the former log becomes full. The log(s) may conta
in additional unrelated debugging information. To filter out the needed informat
ion, please search for lines which contain text 'NO_CLIENT_SITE:'. The first wor
d after this string is the client name and the second word is the client IP addr
ess. The maximum size of the log(s) is controlled by the following registry DWOR
D value 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameter
s\LogFileMaxSize'; the default is 20000000 bytes. The current maximum size is 2
0000000 bytes. To set a different maximum size, create the above registry value
and set the desired maximum size in bytes.
A warning event occurred. EventID: 0x0000000B
Time Generated: 02/26/2013 22:42:06
Event String:
Custom dynamic link libraries are being loaded for every application
. The system administrator should review the list of libraries to ensure they ar
e related to trusted applications. Please visit http://support.microsoft.com/kb/
197571 for more information.
A warning event occurred. EventID: 0x000727AA
Time Generated: 02/26/2013 22:43:09
Event String:
The WinRM service failed to create the following SPNs: WSMAN/SRV09.d
ikkenberg.local; WSMAN/SRV09.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name _msdcs.dikkenberg.local timed out after
none of the configured DNS servers responded.
A warning event occurred. EventID: 0x000003F6
Time Generated: 02/26/2013 22:43:11
Event String:
Name resolution for the name dikkenberg.local timed out after none o
f the configured DNS servers responded.
A warning event occurred. EventID: 0x0000000C
Time Generated: 02/26/2013 22:43:13
Event String:
Time Provider NtpClient: This machine is configured to use the domai
n hierarchy to determine its time source, but it is the AD PDC emulator for the
domain at the root of the forest, so there is no machine above it in the domain
hierarchy to use as a time source. It is recommended that you either configure a
reliable time service in the root domain, or manually configure the AD PDC to s
ynchronize with an external time source. Otherwise, this machine will function a
s the authoritative time source in the domain hierarchy. If an external time sou
rce is not configured or used for this computer, you may choose to disable the N
tpClient.
A warning event occurred. EventID: 0x00001796
Time Generated: 02/26/2013 22:43:50
Event String:
Microsoft Windows Server has detected that NTLM authentication is pr
esently being used between clients and this server. This event occurs once per b
oot of the server on the first time a client uses NTLM with this server.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:12
Event String:
Driver Samsung CLP-320 Series required for printer Samsung CLP-320 S
eries is unknown. Contact the administrator to install the driver before you log
in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Verz
enden naar OneNote 2013 is unknown. Contact the administrator to install the dri
ver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:16
Event String:
Driver DYMO LabelWriter 400 Turbo required for printer DYMO LabelWri
ter 400 Turbo is unknown. Contact the administrator to install the driver before
you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 02/26/2013 22:44:17
Event String:
Driver Microsoft XPS Document Writer required for printer Microsoft
XPS Document Writer is unknown. Contact the administrator to install the driver
before you log in again.
......................... SRV09 failed test SystemLog
Starting test: VerifyReferences
......................... SRV09 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dikkenberg
Starting test: CheckSDRefDom
......................... dikkenberg passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... dikkenberg passed test CrossRefValidation
Running enterprise tests on : dikkenberg.local
Starting test: LocatorCheck
......................... dikkenberg.local passed test LocatorCheck
Starting test: Intersite
......................... dikkenberg.local passed test Intersite
With kind regards, Bas van den DikkenbergDoing primary tests
Testing server: Bas\SRV01
Starting test: Advertising
Warning: DsGetDcName returned information for
\\SRV09.dikkenberg.local, when we were trying to reach SRV01.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... SRV01 failed test Advertising
"SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE"
this error means that the DC is in USN rollback state.
srv01 is not usn rollback see:
test from other DC:
Doing primary tests
Testing server: Ouders\SRV10
Starting test: Advertising
......................... SRV10 passed test Advertising
Starting test: FrsEvent
......................... SRV10 passed test FrsEvent
Test from srv09:
Doing primary tests
Testing server: Bas\SRV09
Starting test: Advertising
......................... SRV09 passed test Advertising
Starting test: FrsEvent
......................... SRV09 passed test FrsEvent
With kind regards, Bas van den Dikkenberg
Maybe you are looking for
-
Time variation 1hr between iCal apps and the ones synched to phone
I've just downloaded a plug in to allow me synch my ical appointments to my new mobile (a sony ericsson W850i). This works now which is great but all the appointments have come up one hour earlier on the phone. I have so many apps etc each day and I
-
Can I upgrade iWorks'08 to iWorks'09 on Mac OS 10.7.5?
I have iWorks'08 (Pages 3.0.3, Numbers 1.0.3 , Keynote 4.0.4) on my MacBook Air using Mac OS 10.7.5. I bought a new iMac (10.10.03) with Pages 5.5.3, Numbers 3.5.3, Keynote 6.5.3). When I try to open a document, it says I need to save them in iWorks
-
I can't sign in to my business catalyst account
-
Exceptions in deploying ThreeEJB Hotel sample
When I use JDeveloper to deploy ThreeEJBHotel to "Connection" I encounter the following exceptions. I am looking for suggestions from other developers or Oracle tech support. The OS is Windows 2000 advanced server. Thank you very much. Beginning depl
-
Nokia 7230 Not Recognised By PC Suite Neither Ovi ...
Plz Help Me Out Anyone. From 2-3 Days PC Suite, Ovi Suite & Nokia Software Updater Are Not Able To Recognise My Mobile My Nokia 7230 Was Able To Be Detected By These Previously. But Donno Wat has Happened. Now It's Not Detecting. But Still My Compute