EWA - traffic light pictures missing - text rating available
Hello,
we have currently SAP EHP 1 for SAP Solution Manager 7.0 with SP Stack 26 installed. In all our EWA reports the traffic light pictures are missing.
Nevertheless, the rating is correct and visible as the missing image comment. This is within the DSWP preview, in the Word documents and also in the HTML reports. We already deleted and updated the service definitions but the issue stays.
Is there any correction for this?
Kind regards,
Sven
Checked the notes I guess?
So note https://service.sap.com/sap/support/notes/1480106 is not the solution?
We had issues with Basis SP08 (SAPKB70108) cause it introduced new procedure to determine SAPWORKDIR.
Note 1501119 describes this change.
In our case the SAPWORKDIR ended up on
-folder names causing lots of issues in RMAUTH-transaction. Check the SAPWORKDIR-folder to see if the icons gets downloaded or not!
Similar Messages
-
Traffic lights are missing on Safari
Traffic lights are missing on Safari. Please help.
To regain your 'traffic lights' go to top of screen and minimise, then drag the screen to the required size. Every time I maximised the lights disappeared, but when I minimised it they showed up. I eventually caught on and then dragged the minimised screen to the required size, Easy when you know how!!
-
Using InDesign CS6 onWindows PC. Apple icon and traffic lights in L top corner are missing and so are some of the editing features. I fixed this once before by accident but can't remember how I did it. All I remember is it had something to do with the veiw % in other applications - I think!
I've been using a tutorial that is obviously been done on a Mac.
I used to have a link somewhere that was basically a list of all of the differences between the two platforms, but I can't lay hands on it. I'm sure if you asked us about the features that were missing or broken, we could answer fairly easily - you know, like "Preferences are under the InDesign menu on a Mac, but in Windows they're under Edit."
The worst of these differences is in keyboard shortcuts - Macs have an extra modifier key, so whenever I switch platforms I always spend twenty minutes flopping my hands around and muttering uncomplimentary things about Cupertino and Redmond, at least until muscle memory takes over. -
Internet pages missing text & pictures?
Always pictures missing form each website?
I am unable to enter text into the message section
This problem could be caused by some Launch Services cache or preferences corruption that affects the built-in spell checker. The following article describes how to manually reset Launch Services -- the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
Resetting Launch Services
If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, this other article provides links to some utilities that can be used for troubleshooting and cache cleaning:
Resolving Disk, Permission, and Cache Corruption
It seems that the most appropriate utility for solving this particular problem is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
Side effects of System cache cleaning
As an example, this is how you should proceed with OnyX:
1. Quit all applications.
2. Launch OnyX and enter your administrator password.
3. Click Maintenance. In the Reset section, check LaunchServices database.
4. You may uncheck any other pre-checked options if you wish.
5. Click the Execute button.
6. Restart the computer. -
5800 XM missed text light keeps flashing!
Hello everyone!
Right, I dont know why, ever since I updated the 5800 with the latest firmware the little white light that used to only flash when I had a missed call or a missed text now flashes constantly (at that same slow rate..but its always flashing). I went through my inbox, outbox everything. Then went though all the missed calls etc, but it still flashes.
Any ideas why or how I could stop it?
Cheers!
Solved!
Go to Solution.It's the "breather" as mentioned in the hundred or so other threads about this issue on this forum.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you! -
How to print traffic lights in ALV reports
hi how to print traffic lights on selection screen in alv reports
HI,
check below code
TYPE-POOLS : icon.
types: BEGIN OF ty_display,
status TYPE icon-id,
bukrs TYPE bseg-bukrs,
gjahr TYPE bseg-gjahr,
monat TYPE monat,
work_order TYPE z_work_order,
glaccount TYPE saknr,
message TYPE string,
END OF ty_display.
data : it_display TYPE TABLE OF ty_display,
wa_display TYPE ty_display.
WRITE icon_led_green AS ICON TO wa_display-status.
wa_display-gjahr = p_year.
wa_display-bukrs = p_cc.
wa_display-monat = p_period.
wa_display-work_order = v_aufnr.
wa_display-glaccount = wa_bseg-hkont.
APPEND wa_display TO it_display.
WRITE icon_led_red AS ICON TO wa_display-status.
wa_display-gjahr = p_year.
wa_display-bukrs = p_cc.
wa_display-monat = p_period.
wa_display-work_order = v_aufnr.
wa_display-glaccount = wa_bseg-hkont.
wa_display-message = text-010.
APPEND wa_display TO it_display.
change the icon color based on your requirement and append it to the internal table which you have to display in ALV.
reward points if it is helpful.
Regards,
Srilatha -
Displaying traffic lights in alv grid report?
Hi everyone,
I have an alv grid report.I m using the FM reuse_alv_grod_display to display my alv report.I am passing the fieldcatalogue automatically.I m getting the output perfectly.Now i have to add traffic lights to that alv report.
Since i m passing the fieldcatalogue automatically i m confused to display the traffic lights?
any suggestions please?
Thank you.hi dp,
look at the program i made... se the bold part you will be able to impelment lights easily,
DECLARING TYPES POOL *
All the definitions of internal tables, structures and constants
are declared in a type-pool called SLIS.
type-pools: slis.
TABLES *
tables: vbak,vbap,kna1.
TYPES *
*&--defining types for TABLE VBAK
types: begin of t_vbak,
vbeln type vbeln_va, "sales document
kunnr type kunag,
erdat type erdat,
auart type auart,
netwr type netwr_ak,
waerk type waerk,
vkorg type vkorg,
vtweg type vtweg,
spart type spart,
name1 type name1_gp,
stras type stras_gp,
ort01 type ort01_gp,
pstlz type pstlz,
regio type regio,
land1 type land1_gp,
telf1 type telf1,
end of t_vbak.
*&--Defining types for TABLE VBAP
types: begin of t_vbap,
vbeln type vbeln_va,
posnr type posnr_va,
matnr type matnr,
maktx type maktx,
end of t_vbap.
*&--MERGED FINAL SALES TABLE
types: begin of t_sales_final,
vbeln type vbeln_va,
kunnr type kunag,
posnr type posnr_va,
erdat type erdat, "date of creation
auart type auart,
netwr type netwr_ak,
waerk type waerk,
vkorg type vkorg,
vtweg type vtweg,
spart type spart,
name1 type name1_gp,
v_lights type c,
stras type stras_gp,
ort01 type ort01_gp,
pstlz type pstlz,
regio type regio,
land1 type land1_gp,
telf1 type telf1,
matnr type matnr,
maktx type maktx,
end of t_sales_final.
defining wrokarea and IT.
WORK AREA DECLARATION *
*&---work area for Internal Tables
data: wa_vbak type t_vbak.
data: wa_vbap type t_vbap.
data: wa_sales_final type t_sales_final.
*&--work area for layout
data: wa_layout type slis_layout_alv.
INTERNAL TABLES DECLARATION *
*&---Internal tables without Header Line.
data : i_vbak type standard table of t_vbak,
i_vbap type standard table of t_vbap,
i_sales_final type standard table of t_sales_final.
*&---Internal table for field catalog
data : i_fieldcat type slis_t_fieldcat_alv,
*&---Internal table for the sorting sequence.
i_sortinfo type slis_t_sortinfo_alv,
*&---Internal table for the event catalog.
i_eventcat type slis_t_event,
*&---Internal table for the top of page event
i_listheader type slis_t_listheader.
VARIABLE DECLARATION *
data : v_progname like sy-repid, "Program name(system defined)
v_gridtitle type lvc_title. "Grid Title
INITIALIZATION EVENT *
initialization.
v_progname = sy-repid.
refresh:i_vbak,
i_vbap,
i_sales_final,
i_fieldcat,
i_sortinfo,
i_eventcat,
i_listheader.
clear: wa_vbak,
wa_vbap,
wa_sales_final,
wa_layout.
SELECTION SCREEN *
SCREEN FOR ENTERING INFORMATION
selection-screen begin of block b1 with frame title text-001.
select-options: r_vbeln for wa_vbak-vbeln obligatory.
select-options: r_erdat for wa_vbak-erdat obligatory.
selection-screen end of block b1 .
AT SELECTION SCREEN *
at selection-screen.
perform zf_validate_sales_doc_no.
perform zf_validate_date.
START OF SELECTION EVENT
start-of-selection.
perform zf_populate_header.
perform zf_populate_detail.
perform zf_append_sales_final.
END OF SELECTION EVENT
end-of-selection.
*If Internal Table Is Populated Then Only Display Alv Report.
if i_sales_final is not initial.
Prepare fieldcatalog .
perform zf_build_fieldcat using i_fieldcat.
MODIFY the records IN the internal TABLE for the traffic lights.
perform zf_modify_final.
build event catalogue
perform zf_eventcat using i_eventcat.
build sorting
perform zf_sorting using i_sortinfo.
&---Build Listheader for TOP OF PAGE EVENT.
perform zf_build_listheader using i_listheader.
&---Build layout.
perform zf_layout.
&---Initializating Grid Title
perform zf_build_grid_title.
&---Display alv grid.
perform zf_display_alv_grid.
else.
*If Table is not Populated ie Records Does not exist
message 'Record Does Not Exist' type 'S'.
endif.
*& Form zf_validate_sales_doc_no
text
--> p1 text
<-- p2 text
form zf_validate_sales_doc_no .
select single vbeln into wa_vbak-vbeln from vbak where vbeln in r_vbeln .
if sy-subrc <> 0.
message i101.
endif.
endform. " zf_validate_sales_doc_no
*& Form zf_validate_date
text
--> p1 text
<-- p2 text
form zf_validate_date .
if date is future
if r_erdat-low >= sy-datum.
message e102.
elseif r_erdat-high >= sy-datum.
message e103.
endif.
endform. " zf_validate_date
*& Form zf_populate_header
text
--> p1 text
<-- p2 text
form zf_populate_header .
select vbeln
kunnr
erdat
auart
netwr
waerk
vkorg
vtweg
spart
into table i_vbak from vbak where vbeln in r_vbeln.
if sy-subrc <> 0.
message 'RECORD DOES NOT EXIST' type 'E'.
endif.
sort i_vbak by vbeln.
*&--LOGIC TO GET FIELDS FROM TABLE KNA1 INTO INTERNAL TABLE I_VBAK
loop at i_vbak into wa_vbak.
select single name1 stras ort01 pstlz regio land1 telf1 into (wa_vbak-name1,
wa_vbak-stras,
wa_vbak-ort01,
wa_vbak-pstlz,
wa_vbak-regio,
wa_vbak-land1,
wa_vbak-telf1)
from kna1
where kunnr = wa_vbak-kunnr.
modifying it_header.
modify i_vbak from wa_vbak.
clear wa_vbak.
endloop.
endform. " zf_populate_header
*& Form zf_populate_detail
text
--> p1 text
<-- p2 text
form zf_populate_detail .
if i_vbak[] is not initial.
select vbeln
posnr
matnr
into table i_vbap from vbap
for all entries in i_vbak where vbeln = i_vbak-vbeln.
endif.
sort i_vbap by vbeln.
sort i_vbap by posnr.
*&--LOGIC TO GET FIELDS FROM TABLE MAKT INTO INTERNAL TABLE I_VBAP
loop at i_vbap into wa_vbap.
select single maktx into (wa_vbap-maktx)
from makt where matnr = wa_vbap-matnr and spras = sy-langu.
modifying it_header.
modify i_vbap from wa_vbap.
clear wa_vbap.
endloop.
endform. " zf_populate_detail
*& Form zf_append_sales_final
text
--> p1 text
<-- p2 text
form zf_append_sales_final .
sort i_vbak by vbeln.
sort i_vbap by vbeln posnr.
loop at i_vbak into wa_vbak.
move-corresponding wa_vbak to wa_sales_final.
read table i_vbap with key vbeln = wa_vbak-vbeln
binary search transporting no fields.
loop at i_vbap into wa_vbap from sy-tabix.
if wa_vbap-vbeln <> wa_vbak-vbeln.
exit.
endif.
move-corresponding wa_vbap to wa_sales_final.
append wa_sales_final to i_sales_final.
endloop.
endloop.
endform. " zf_append_sales_final
*& Form zf_build_fieldcat
text
-->P_I_FIELDCAT text
form zf_build_fieldcat using p_i_fieldcat type slis_t_fieldcat_alv.
data: l_fieldcat type slis_fieldcat_alv. "local Workarea used
clear l_fieldcat.
FOR LIGHT IN COLUMN
clear l_fieldcat.
l_fieldcat-col_pos = '1'. " POSITION OF THE COLUMN.
l_fieldcat-fieldname = 'V_LIGHTS'.
" FIELD FOR WHICH CATALOG ID FILLED.
*We are passing final internal table 'I_FINAL' to l_fieldcat(local
*variable
l_fieldcat-tabname = 'I_SALES_FINAL'.
" INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
l_fieldcat-just = 'C'. " FOR JUSTIFICATION.
l_fieldcat-outputlen = 20.
" TO DEFINE OUTPUT LENGTH OF THE COLUMN.
append l_fieldcat to p_i_fieldcat.
FIRST COLUMN ********************************
l_fieldcat-col_pos = '2'. " POSITION OF THE COLUMN
l_fieldcat-fieldname = 'VBELN'. " FIELD FOR WHICH CATALOG ID FILLED
l_fieldcat-tabname = 'I_SALES_FINAL'. " INTERNAL TABLE BELONGS TO
l_fieldcat-key = 'X'. " SO THAT this field is not scrollable hiddable.
l_fieldcat-just = 'L'. " FOR JUSTIFICATION
*l_fieldcat-hotspot = 'X'. " MARK THIS field as hotsopt
l_fieldcat-lzero = 'X'. " OUTPUT WITH leading zeros.
l_fieldcat-seltext_l = 'Sales Document'. " long text for header.
l_fieldcat-seltext_m = 'Sales Doc'. " medium text for header.
l_fieldcat-seltext_s = 'Sales Doc'. " sort text for header.
l_fieldcat-outputlen = 20. " SET THE output length.
l_fieldcat-ref_tabname = 'VBAK'. " FOR F1 & F4 help as
append l_fieldcat to p_i_fieldcat.
clear l_fieldcat.
**************************SECOND COLUMN ********************************
*l_fieldcat-col_pos = '3'. " POSITION OF THE COLUMN
l_fieldcat-row_pos = '2'. " POSITION OF THE COLUMN
l_fieldcat-fieldname = 'POSNR'. " FIELD FOR WHICH CATALOG ID FILLED
l_fieldcat-tabname = 'I_SALES_FINAL'. " INTERNAL TABLE BELONGS TO
l_fieldcat-key = 'X'. " SO THAT this field is not scrollable hiddable.
l_fieldcat-just = 'L'. " FOR JUSTIFICATION
l_fieldcat-hotspot = 'X'. " MARK THIS field as hotsopt
l_fieldcat-lzero = 'x'. " OUTPUT WITH leading zeros.
l_fieldcat-seltext_l = 'Sales Document Item'. " long text for header.
l_fieldcat-seltext_m = 'Sales Document Item'. " medium text for header.
l_fieldcat-seltext_s = 'Sales Document Item'. " sort text for header.
l_fieldcat-outputlen = 20. " SET THE output length.
l_fieldcat-ref_tabname = 'VBAP'. " FOR F1 & F4 help as
append l_fieldcat to p_i_fieldcat.
clear l_fieldcat.
endform. " zf_build_fieldcat
*& Form zf_eventcat
text
-->P_I_EVENTCAT text
form zf_eventcat using p_i_eventcat type slis_t_event.
data: l_eventcat type slis_alv_event.
clear l_eventcat.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
TOP OF PAGE FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_top_of_page.
"(COMPONENT "NAME"of structure)
if sy-subrc = 0. "if success
move 'ZF_TOP_OF_PAGE' to l_eventcat-form.
"matches name and moves form to workarea and modifies table
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
PF_STATUS_SET FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_pf_status_set.
if sy-subrc = 0.
move 'ZF_PF_STATUS_SET' to l_eventcat-form.
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
USER_COMMAND FORM
clear l_eventcat.
read table p_i_eventcat into l_eventcat with key
name = slis_ev_user_command.
if sy-subrc = 0.
move 'ZF_USER_COMMAND' to l_eventcat-form.
modify p_i_eventcat from l_eventcat index sy-tabix
transporting form.
endif.
endform. " zf_eventcat
*& Form zf_sorting
text
-->P_I_SORTINFO text
form zf_sorting using p_i_sortinfo.
endform. " zf_sorting
*& Form zf_build_listheader
text
-->P_I_LISTHEADER text
form zf_build_listheader using p_i_listheader type slis_t_listheader.
data: l_listheader type slis_listheader.
refresh p_i_listheader.
clear l_listheader.
HEADER
l_listheader-typ = 'H'.
l_listheader-info = 'FUJITSU CONSULTING INDIA LTD.'.
append l_listheader to p_i_listheader.
SELECTION
l_listheader-typ = 'S'.
l_listheader-key = 'Date:'.
l_listheader-info = sy-datum.
append l_listheader to p_i_listheader.
ACTION
l_listheader-typ = 'A'.
*l_listheader-key =
l_listheader-info = 'SALES ORDER ALV REPORT By Rohan Malik'.
append l_listheader to p_i_listheader.
endform. " zf_build_listheader
*& Form zf_build_grid_title
text
--> p1 text
<-- p2 text
form zf_build_grid_title .
v_gridtitle = 'List of Purchase Order'.
endform. " zf_build_grid_title
*& Form zf_display_alv_grid
text
--> p1 text
<-- p2 text
form zf_display_alv_grid .
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_grid_title = v_gridtitle
is_layout = wa_layout
it_fieldcat = i_fieldcat
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = i_sales_final
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " zf_display_alv_grid
*& Form zf_top_of_page
text
--> p1 text
<-- p2 text
form zf_top_of_page .
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = i_listheader
i_logo = 'ENJOYSAP_LOGO'
I_END_OF_LIST_GRID =
endform. " zf_top_of_page
*& Form zf_user_command
text
--> p1 text
<-- p2 text
form zf_user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield .
case r_ucomm. "FCODE
when 'VA03'.
read table i_sales_final into wa_sales_final index rs_selfield-tabindex.
set parameter id 'AUN' field rs_selfield-value.
call transaction 'VA03' and skip first screen .
message i102 with rs_selfield-value .
when '&IC1'. "for hotspot with VBELN, POSNR, MATNR, KUNNR.
if rs_selfield-fieldname = 'MATNR'.
set parameter id 'MAT' field rs_selfield-value.
call transaction 'MM03' and skip first screen.
return.
message i103 with rs_selfield-value .
endif.
if rs_selfield-fieldname = 'VBELN'.
set parameter id 'AUN' field rs_selfield-value.
call transaction 'VA03' and skip first screen.
return.
message i104 with rs_selfield-value .
endif.
endcase.
endform. " zf_user_command
*& Form ZF_PF_STATUS_SET
text
--> p1 text
<-- p2 text
form zf_pf_status_set using rt_extab type slis_t_extab.
set pf-status 'Z11_RM_ALV_SO'.
endform. " ZF_PF_STATUS_SET
*& Form zf_layout
text
--> p1 text
<-- p2 text
form zf_layout .
wa_layout-zebra = 'X'.
wa_layout-lights_fieldname = 'V_LIGHTS'.
wa_layout-lights_tabname = 'I_SALES_FINAL'.
" 1, 2 or 3 for red, yellow and green respectively.
endform. " zf_layout
*& Form zf_modify_final
text
--> p1 text
<-- p2 text
form zf_modify_final .
CODE TO EXECUTE LIGHTS
*start of loop
loop at i_sales_final into wa_sales_final.
*giving conditions and modifying as we want to change many rows
if wa_sales_final-netwr <= 10000.
wa_sales_final-v_lights = '1'.
modify i_sales_final from wa_sales_final transporting v_lights.
elseif wa_sales_final-netwr > 10000 and wa_sales_final-netwr <= 100000.
wa_sales_final-v_lights = '2'. " Exception.
modify i_sales_final from wa_sales_final transporting v_lights.
else.
wa_sales_final-v_lights = '3'. " Exception.
modify i_sales_final from wa_sales_final transporting v_lights.
endif.
endloop.
reward point s if helpful
rohan malik -
Display Traffic Lights in ALV TREE
Hi,
I have to display traffic light in ALV tree but i am not able to find out what parameter i should pass like in ALV grid where we can set is_layout (BCALV_GRID_04).
Thanks in advance.
Regards,
HarshHi,
Please take a look at my code below. Hope it suits your requirement.
P.S. Please award points if it helps...
*& Report ZMM_R_PO_TO_IPURCH_XI
*& PROGRAM TYPE : Report
*& RICEF ID :
*& TITLE : ZMM_R_PO_TO_IPURCH_XI
*& SAP Module : MM
*& CREATION DATE : 02/06/2008
*& AUTHOR : Aris Hidalgo
*& DESIGNER : Aris Hidalgo
*& DESCRIPTION :
*$**********************************************************************
*$ CHANGE HISTORY
*$----------------------------------------------------------------------
*$ DATE | T-Num | Description | Reference
** | | |
*$**********************************************************************
REPORT zmm_r_po_to_ipurch_xi
NO STANDARD PAGE HEADING
MESSAGE-ID zmm.
* Data Dictionary Table/s *
TABLES: edidc.
* SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_credat FOR edidc-credat OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: rb_sum RADIOBUTTON GROUP grp1,
rb_det RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK b2.
*/ CLASS DEFINITION/S /*
* CLASS lcl_data_def DEFINITION
CLASS lcl_data_def DEFINITION ABSTRACT.
PUBLIC SECTION.
TYPES: BEGIN OF t_edidc,
docnum TYPE edidc-docnum,
docrel TYPE edidc-docrel,
status TYPE edidc-status,
doctyp TYPE edidc-doctyp,
direct TYPE edidc-direct,
rcvpor TYPE edidc-rcvpor,
rcvprt TYPE edidc-rcvprt,
rcvprn TYPE edidc-rcvprn,
rcvsad TYPE edidc-rcvsad,
sndpor TYPE edidc-sndpor,
sndprt TYPE edidc-sndprt,
sndprn TYPE edidc-sndprn,
sndsad TYPE edidc-sndsad,
credat TYPE edidc-credat,
cretim TYPE edidc-cretim,
mestyp TYPE edidc-mestyp,
idoctp TYPE edidc-idoctp,
END OF t_edidc.
TYPES: BEGIN OF t_output,
exception TYPE char1,
ebeln TYPE ekko-ebeln,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
credat TYPE edidc-credat,
cretim TYPE edidc-cretim,
END OF t_output.
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekko-ebeln,
lifnr TYPE ekko-lifnr,
END OF t_ekko.
TYPES: BEGIN OF t_lfa1,
lifnr TYPE lfa1-lifnr,
name1 TYPE lfa1-name1,
END OF t_lfa1.
DATA: gt_edidc TYPE STANDARD TABLE OF t_edidc,
gt_output TYPE STANDARD TABLE OF t_output,
wa_output LIKE LINE OF gt_output,
gt_ekko TYPE HASHED TABLE OF t_ekko
WITH UNIQUE KEY ebeln,
gt_lfa1 TYPE HASHED TABLE OF t_lfa1
WITH UNIQUE KEY lifnr.
ENDCLASS. "lcl_data_def DEFINITION
CLASS lcl_alv_routines DEFINITION DEFERRED.
CLASS lcl_handle_events DEFINITION DEFERRED.
* CLASS lcl_get_data DEFINITION
CLASS lcl_get_data DEFINITION INHERITING FROM lcl_data_def.
PUBLIC SECTION.
METHODS: get_idocs,
read_idocs,
process_data
IMPORTING
im_docnum TYPE edidc-docnum.
PRIVATE SECTION.
CONSTANTS: lc_mestyp TYPE edidc-mestyp VALUE 'ZMARKETSITE_PURCHASE_ORDER',
lc_idoctp TYPE edidc-idoctp VALUE 'ZMARKETSITE_PURCHASE_ORDER01',
lc_segnam TYPE edid4-segnam VALUE 'ZMARKETSITE_ORDER_HEADER1'.
CONSTANTS: lc_red TYPE i VALUE 1,
lc_yellow TYPE i VALUE 2,
lc_green TYPE i VALUE 3.
DATA: lv_stat_message TYPE bdidocattr-message,
o_lcl_alv_routines TYPE REF TO lcl_alv_routines.
DATA: ls_idoc_control TYPE edidc,
lv_tot_data_recs TYPE sy-dbcnt, "#EC NEEDED
lv_tot_status_recs TYPE sy-dbcnt. "#EC NEEDED
DATA: lt_edids TYPE STANDARD TABLE OF edids,
lt_edidd TYPE STANDARD TABLE OF edidd.
ENDCLASS. "lcl_get_data DEFINITION
* CLASS lcl_alv_routines DEFINITION
CLASS lcl_alv_routines DEFINITION INHERITING FROM lcl_get_data.
PUBLIC SECTION.
DATA: lcl_table TYPE REF TO cl_salv_table,
lcl_container TYPE REF TO cl_gui_custom_container,
lcl_handle_events TYPE REF TO lcl_handle_events,
lcl_columns TYPE REF TO cl_salv_columns_table,
lcl_column TYPE REF TO cl_salv_column_table,
lcl_events2 TYPE REF TO cl_salv_events_table,
lcl_display_settings TYPE REF TO cl_salv_display_settings,
lcl_functions TYPE REF TO cl_salv_functions_list,
lcl_display TYPE REF TO cl_salv_display_settings,
lcl_aggregations TYPE REF TO cl_salv_aggregations,
lcl_sorts TYPE REF TO cl_salv_sorts,
lcl_content TYPE REF TO cl_salv_form_element,
lcl_header TYPE REF TO cl_salv_form_header_info,
ls_color TYPE lvc_s_colo.
DATA: lcl_grid TYPE REF TO cl_salv_form_layout_grid,
lcl_grid_1 TYPE REF TO cl_salv_form_layout_grid,
lcl_grid_2 TYPE REF TO cl_salv_form_layout_grid,
lcl_label TYPE REF TO cl_salv_form_label,"#EC NEEDED
lcl_text TYPE REF TO cl_salv_form_text,
gt_t247 TYPE STANDARD TABLE OF t247,
wa_t247 LIKE LINE OF gt_t247,
lv_text TYPE string.
METHODS: display_data
IMPORTING
im_output LIKE gt_output,
display_top_of_page.
PRIVATE SECTION.
DATA: lv_string TYPE string,
lv_date1 TYPE c LENGTH 10,
lv_time TYPE c LENGTH 10,
lv_title TYPE string.
ENDCLASS. "lcl_alv_routines DEFINITION
* CLASS lcl_handle_events DEFINITION
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
METHODS:
on_link_click FOR EVENT link_click OF cl_salv_events_table
IMPORTING row column.
ENDCLASS. "lcl_handle_events DEFINITION
*/ IMPLEMENTATION/S /*
* CLASS lcl_get_data IMPLEMENTATION
CLASS lcl_get_data IMPLEMENTATION.
* METHOD get_idocs
METHOD get_idocs.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = text-p01.
SELECT docnum docrel status doctyp
direct rcvpor rcvprt rcvprn
rcvsad sndpor sndprt sndprn
sndsad credat cretim mestyp
idoctp
FROM edidc
INTO TABLE gt_edidc
WHERE mestyp = lc_mestyp
AND idoctp = lc_idoctp
AND credat IN s_credat.
IF gt_edidc[] IS NOT INITIAL.
* Get IDOC details
CALL METHOD me->read_idocs.
ENDIF.
ENDMETHOD. "get_idocs
* METHOD read_idocs
METHOD read_idocs.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
* PERCENTAGE = 0
text = text-p02.
FIELD-SYMBOLS: <fs_edidc> LIKE LINE OF gt_edidc,
<fs_output> LIKE LINE OF gt_output,
<fs_ekko> LIKE LINE OF gt_ekko,
<fs_lfa1> LIKE LINE OF gt_lfa1.
LOOP AT gt_edidc ASSIGNING <fs_edidc>.
CLEAR ls_idoc_control.
REFRESH: lt_edids, lt_edidd.
* Get status text of IDOC
CALL FUNCTION 'IDOC_GET_MESSAGE_ATTRIBUTE'
EXPORTING
idoc_number = <fs_edidc>-docnum
IMPORTING
idoc_message = lv_stat_message.
* Get IDOC details
CALL FUNCTION 'IDOC_READ_COMPLETELY'
EXPORTING
document_number = <fs_edidc>-docnum
IMPORTING
idoc_control = ls_idoc_control
number_of_data_records = lv_tot_data_recs
number_of_status_records = lv_tot_status_recs
TABLES
int_edids = lt_edids
int_edidd = lt_edidd
EXCEPTIONS
document_not_exist = 1
document_number_invalid = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* Pass data to output table
CALL METHOD me->process_data
EXPORTING
im_docnum = <fs_edidc>-docnum.
ENDLOOP.
DELETE gt_output WHERE ebeln IS INITIAL.
IF gt_output[] IS NOT INITIAL.
* Get vendor for fetched POs
SELECT ebeln lifnr
FROM ekko
INTO TABLE gt_ekko
FOR ALL ENTRIES IN gt_output
WHERE ebeln = gt_output-ebeln.
IF gt_ekko[] IS NOT INITIAL.
* Get name of vendors
SELECT lifnr name1
FROM lfa1
INTO TABLE gt_lfa1
FOR ALL ENTRIES IN gt_ekko
WHERE lifnr = gt_ekko-lifnr.
ENDIF.
* Pass vendor details to output table
LOOP AT gt_output ASSIGNING <fs_output>.
READ TABLE gt_ekko ASSIGNING <fs_ekko>
WITH TABLE KEY ebeln = <fs_output>-ebeln.
IF sy-subrc = 0.
READ TABLE gt_lfa1 ASSIGNING <fs_lfa1>
WITH TABLE KEY lifnr = <fs_ekko>-lifnr.
IF sy-subrc = 0.
<fs_output>-lifnr = <fs_lfa1>-lifnr.
<fs_output>-name1 = <fs_lfa1>-name1.
ENDIF.
ENDIF.
ENDLOOP.
CREATE OBJECT o_lcl_alv_routines.
CALL METHOD o_lcl_alv_routines->display_data
EXPORTING
im_output = gt_output[].
ENDIF.
ENDMETHOD. "read_idocs
* METHOD process_data
METHOD process_data.
FIELD-SYMBOLS: <fs_edidd> LIKE LINE OF lt_edidd.
IF lv_stat_message CP 'ok' OR
lv_stat_message CP 'positive'.
wa_output-exception = lc_green.
ELSEIF lv_stat_message CP 'error' OR
lv_stat_message CP 'negative'.
wa_output-exception = lc_red.
ELSE.
wa_output-exception = lc_yellow.
ENDIF.
READ TABLE lt_edidd ASSIGNING <fs_edidd>
WITH KEY docnum = im_docnum
segnam = lc_segnam.
IF sy-subrc = 0.
wa_output-ebeln = <fs_edidd>-sdata+0(10).
ENDIF.
wa_output-credat = ls_idoc_control-credat.
wa_output-cretim = ls_idoc_control-cretim.
APPEND wa_output TO gt_output.
CLEAR wa_output.
ENDMETHOD. "process_data
ENDCLASS. "lcl_get_data IMPLEMENTATION
* CLASS lcl_alv_routines IMPLEMENTATION
CLASS lcl_alv_routines IMPLEMENTATION.
* METHOD display_data
METHOD display_data.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
percentage = 0
text = text-p03.
gt_output[] = im_output[].
TRY.
cl_salv_table=>factory(
EXPORTING
list_display = ''
IMPORTING
r_salv_table = lcl_table
CHANGING
t_table = gt_output ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
lcl_functions = lcl_table->get_functions( ).
* Set all standard ALV functions
lcl_functions->set_all( abap_true ).
lcl_columns = lcl_table->get_columns( ).
lcl_columns->set_optimize( '' ).
* Set display to striped pattern
lcl_display = lcl_table->get_display_settings( ).
lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
*/Sort columns
TRY.
lcl_sorts = lcl_table->get_sorts( ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
lcl_sorts->set_group_active( ).
TRY.
lcl_sorts->add_sort(
columnname = 'EBELN'
subtotal = '' ).
CATCH cx_salv_not_found cx_salv_existing cx_salv_data_error."#EC NO_HANDLER
ENDTRY.
*/Set column names
TRY.
lcl_columns->set_exception_column( 'EXCEPTION' ).
CATCH cx_salv_data_error. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EXCEPTION' ).
lcl_column->set_short_text( text-h01 ).
lcl_column->set_medium_text( text-h01 ).
lcl_column->set_long_text( text-h01 ).
lcl_column->set_output_length( '6' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EBELN' ).
lcl_column->set_short_text( text-h02 ).
lcl_column->set_medium_text( text-h02 ).
lcl_column->set_long_text( text-h02 ).
lcl_column->set_output_length( '9' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'LIFNR' ).
* lcl_column->set_short_text( text-h03 ).
lcl_column->set_medium_text( text-h03 ).
lcl_column->set_long_text( text-h03 ).
lcl_column->set_output_length( '11' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'NAME1' ).
* lcl_column->set_short_text( text-h04 ).
* lcl_column->set_medium_text( text-h04 ).
lcl_column->set_long_text( text-h04 ).
lcl_column->set_output_length( '30' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'CREDAT' ).
* lcl_column->set_short_text( text-h05 ).
* lcl_column->set_medium_text( text-h05 ).
lcl_column->set_long_text( text-h05 ).
lcl_column->set_output_length( '13' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'CRETIM' ).
* lcl_column->set_short_text( text-h06 ).
* lcl_column->set_medium_text( text-h06 ).
lcl_column->set_long_text( text-h06 ).
lcl_column->set_output_length( '13' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
*/Set aggregations
* TRY.
* lcl_aggregations = lcl_table->get_aggregations( ).
* CATCH cx_salv_not_found. "#EC NO_HANDLER
* ENDTRY.
* TRY.
* lcl_aggregations->add_aggregation( '' ).
* CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing."#EC NO_HANDLER
* ENDTRY.
*/Hide columns
* TRY.
* lcl_column ?= lcl_columns->get_column( 'DESCRIPT' ).
* lcl_column->set_visible( if_salv_c_bool_sap=>false ).
* CATCH cx_salv_not_found. "#EC NO_HANDLER
* ENDTRY.
*/Display top of page
CALL METHOD me->display_top_of_page.
lcl_table->set_top_of_list( lcl_content ).
*/Handle ALV events
lcl_events2 = lcl_table->get_event( ).
CREATE OBJECT lcl_handle_events.
SET HANDLER lcl_handle_events->on_link_click FOR lcl_events2.
lcl_display_settings = lcl_table->get_display_settings( ).
lcl_table->display( ).
ENDMETHOD. "display_data
* METHOD display_top_of_page
METHOD display_top_of_page.
CREATE OBJECT lcl_grid.
lv_title = text-t01.
lcl_grid->create_header_information(
row = 1
column = 1
text = lv_title
tooltip = lv_title ).
lcl_grid->add_row( ).
lcl_grid_1 = lcl_grid->create_grid(
row = 3
column = 1 ).
CLEAR lv_string.
CONCATENATE: sy-datum+4(2) '/' sy-datum+6(2) '/' sy-datum+0(4)
INTO lv_date1.
CONCATENATE: text-t02 lv_date1
INTO lv_string
SEPARATED BY space.
lcl_label = lcl_grid_1->create_label(
row = 1
column = 1
text = lv_string
tooltip = lv_string ).
CLEAR lv_string.
CONCATENATE: sy-uzeit+0(2) ':' sy-uzeit+2(2) ':' sy-uzeit+4(2)
INTO lv_time.
CONCATENATE: text-t03 lv_time
INTO lv_string
SEPARATED BY space.
lcl_label = lcl_grid_1->create_label(
row = 2
column = 1
text = lv_string
tooltip = lv_string ).
lcl_content = lcl_grid.
ENDMETHOD. "display_top_of_page
ENDCLASS. "lcl_alv_routines IMPLEMENTATION
* CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
* METHOD on_link_click
METHOD on_link_click.
ENDMETHOD. "on_link_click
ENDCLASS. "lcl_handle_events IMPLEMENTATION
* START-OF-SELECTION *
START-OF-SELECTION.
DATA: o_lcl_get_data TYPE REF TO lcl_get_data.
CREATE OBJECT o_lcl_get_data.
CALL METHOD o_lcl_get_data->get_idocs. -
Multiple traffic lights in ALV
Hi friends,
is it possible to have more than one traffic lights colomn in ALV OO ?
i displayed the first one, but i need to display 3 traffic lights in 3 different colomns in my ALV (wich has 10 columns)
Thanks in advance,
SoufianeCopy this and paste in your test program. execute it and see
REPORT ysam_test5 MESSAGE-ID zsummit.
TYPE-POOLS: icon.
DATA: marc TYPE marc.
TYPES: BEGIN OF t_marc,
matnr TYPE matnr,
werks TYPE werks_d,
mmsta TYPE mmsta,
maabc TYPE maabc,
action(4) TYPE c,
action1(4) type c,
action2(4) type c,
END OF t_marc.
DATA: it_marc TYPE TABLE OF t_marc,
wa_marc TYPE t_marc.
FIELD-SYMBOLS: .
DATA: w_recipient TYPE swc_object,
w_recipient_obj TYPE swotobjid.
*container macro
swc_container w_swc_container.
*batch job information
INCLUDE lbtchdef.
DATA: w_job TYPE tbtcjob.
*constants
CONSTANTS: c_on VALUE 'X',
c_off VALUE space,
c_int(11) VALUE ' 0123456789'.
Objects for handling the events
CLASS lcl_handle_events DEFINITION DEFERRED.
DATA: w_events_grid TYPE REF TO lcl_handle_events.
CLASS lcl_handle_events DEFINITION
CLASS lcl_handle_events DEFINITION.
PUBLIC SECTION.
METHODS:
on_link_click FOR EVENT link_click OF cl_salv_events_table
IMPORTING row column.
ENDCLASS. "lcl_handle_events DEFINITION
CLASS lcl_handle_events IMPLEMENTATION
CLASS lcl_handle_events IMPLEMENTATION.
METHOD on_link_click.
IF column = 'ACTION'.
READ TABLE it_marc ASSIGNING refresh.
ENDIF.
ENDMETHOD. "on_single_click
ENDCLASS. "lcl_handle_events IMPLEMENTATION
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME.
SELECT-OPTIONS: s_matnr FOR marc-matnr,
s_werks FOR marc-werks.
SELECTION-SCREEN BEGIN OF BLOCK back WITH FRAME TITLE text-ss2.
PARAMETERS: p_fore RADIOBUTTON GROUP proc DEFAULT 'X', "foreground
p_ball RADIOBUTTON GROUP proc,
p_berr RADIOBUTTON GROUP proc.
SELECTION-SCREEN END OF BLOCK back.
SELECTION-SCREEN BEGIN OF BLOCK mail WITH FRAME TITLE text-ss3.
PARAMETERS: p_print RADIOBUTTON GROUP mail DEFAULT 'X',
p_email RADIOBUTTON GROUP mail.
SELECTION-SCREEN END OF BLOCK mail.
SELECTION-SCREEN END OF BLOCK main.
START-OF-SELECTION.
PERFORM select_data.
END-OF-SELECTION.
PERFORM salv_grid.
*& Form salv_grid
text
FORM salv_grid .
DATA: lref TYPE REF TO cx_root .
DATA: lr_layout TYPE REF TO cl_salv_layout,
ls_key TYPE salv_s_layout_key.
Icon
DATA: l_columns TYPE REF TO cl_salv_columns,
l_column TYPE REF TO cl_salv_column_table.
DATA: l_icon TYPE REF TO cl_salv_column_list.
TRY.
cl_salv_table=>factory(
IMPORTING
r_salv_table = gr_table
CHANGING
t_table = it_marc ).
CATCH cx_salv_msg INTO lref.
ENDTRY.
***Sub Total
PERFORM sub_total.
***Layout
lr_layout = gr_table->get_layout( ).
ls_key-report = sy-cprog.
lr_layout->set_key( ls_key ).
lr_layout->set_default( 'X' ).
lr_layout->set_save_restriction( if_salv_c_layout=>restrict_none ).
***toolbar
gr_functions = gr_table->get_functions( ).
gr_functions->set_all( 'X' ).
icon
l_columns = gr_table->get_columns( ).
TRY.
l_column ?= l_columns->get_column( 'ACTION' ).
l_column->set_short_text( 'Execute' ).
l_column->set_icon( IF_SALV_C_BOOL_SAP=>FALSE ).
CATCH cx_salv_not_found.
ENDTRY.
TRY.
l_column ?= l_columns->get_column( 'ACTION' ).
l_column->set_icon( if_salv_c_bool_sap=>true ).
CATCH cx_salv_not_found.
ENDTRY.
TRY.
l_column ?= l_columns->get_column( 'ACTION' ).
l_column->set_cell_type( if_salv_c_cell_type=>hotspot ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
*... §6.5 register to the event LINK_CLICK
DATA: lr_events TYPE REF TO cl_salv_events_table.
lr_events = gr_table->get_event( ).
CREATE OBJECT w_events_grid.
SET HANDLER w_events_grid->on_link_click FOR lr_events.
*final display
gr_table->display( ).
ENDFORM. " salv
*& Form sub_total
FORM sub_total .
DATA: lr_aggregations TYPE REF TO cl_salv_aggregations.
lr_aggregations = gr_table->get_aggregations( ).
lr_aggregations->clear( ).
TRY.
lr_aggregations->add_aggregation( columnname = 'Z_BALANCE_REM' ).
CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing.
ENDTRY.
TRY.
lr_aggregations->add_aggregation( columnname = 'Z_PAY_AMT' ).
CATCH cx_salv_not_found cx_salv_data_error cx_salv_existing.
ENDTRY.
ENDFORM. " sub_total
*& Form select_data
FORM select_data .
SELECT matnr werks mmsta maabc
INTO CORRESPONDING FIELDS OF TABLE it_marc
FROM marc
WHERE matnr IN s_matnr
AND werks IN s_werks.
IF sy-subrc = 0.
LOOP AT it_marc ASSIGNING -action = icon_execute_object.
ENDLOOP.
ENDIF.
ENDFORM. " select_data
enter material number and press execute icon - just come back from mm02 and it will display three lights. -
Missing text in many programs - Rox, Thunar, Deluge, etc [SOLVED]
Hi all,
I'm having a very confusing problem. Basically, text is just missing from certain programs. Here are a few quick examples:
Thunar:
Rox:
Deluge:
It's very strange. First of all, this just started happening recently, and I don't think after an update or anything. But I know "it just randomly started happening" is a dumb thing to say.
Here is the info I think could be useful:
-I have the ttf-freefont package and the xorg-font family of packages
-I have updated and restarted since this happened; nothing has changed
-The filenames look perfect if I just list them in the terminal (no newlines or anything)
-The filenames that have disappeared aren't anything special, it's seemingly random (no weird characters in them)
-The icons are totally fine
-All the things with missing text are still totally functional if I use them
-I thought this was a file manager issue, but it happening in Deluge too, so nope
-I downloaded and tried Nautilus, same deal, but some files had random words from their name appear. Just as bad basically though
-I also downloaded and tried Midnight Commander (a text based file manager) and everything is perfectly fine in it
Any suggestions? This is very mysterious, and driving me nuts.
Thanks!!
Edit: To clarify, in the Thunar and Rox pictures I just took screenshots of a small portion of a folder. In the Deluge pictures, in the first one those 3 blank looking buttons in that menu should have more words (like "Remove Torrent"), and in the second one, those + and - buttons should also have text.
Last edited by Declan (2012-05-10 00:41:48)Cairo 1.12 was just moved into [extra], so chances are this bug will reappear the next time you -Syu. If you're running Nouveau drivers, then the underlying cause of your issue might be this bug:
https://bugs.archlinux.org/task/29495
If this is indeed your issue, then you need to install the xf86-video-nouveau-0.0.16_git20120512-1 package from [testing]. If you re-enable [testing] and do an -Syu, it should automatically install this package. -
I just spent 3 days creating a book [32 pages], with photos and text but when I click Buy Book In iPhoto this appears>
Our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?
My question is will the text I have sellected to use still be ok, am I safe to continue and buy or will the book have missing text ?
The book is for special birtday in 2 weeks time Please Help.G
<Email Edited by Host>Yes, you're safe to continue. That means that there are text boxes that you did not put any text into and they contain the holding text which will not be printed. That text is shown in a light grayt and is in Latin. Normally you can just put a space in the text box to replace the holding text so as not to get that warning message.
Before ordering the book proof the book according to this Apple document: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Check the pdf file for any missing text or photos and any warning indicators in the text boxes indicating that some of the text has exceeded the space allotted in the text box.
Keep the pdf file to compare with the printed copy when you reciive it.
OT -
Traffic light showing the red colour in vl10g after all status completed
Hi Team,
My client facing one issue regarding the vl10g traffic light it show red colour after all document status is completed so please let me know I have to used which oss note / I have to debug the program(this is the standard T.code) or which way i have to used for resolved this issue so please replay argentely this great help to me and I am very thankful for corporation.
Regrads,
Ravi SAP SDRaviSAPSD wrote:
it show's the error i.e. "No delivery-relevant items in order 0527087193, order type OR"
With this in mind, I'd doubt the previous statement that the order status is 'completed'. Such orders wouldn't be picked up for the Delivery Due list. It is possible that either there is a line item that is not relevant to delivery yet it makes the order header status incomplete. Thus Delivery Due list picks up the order # based on the header status but when it checks the line items, there is nothing relevant for delivery.
Check again the order statuses, not just on screen but in the tables VBUK/VBUP. Additionally, you can search for the notes yourself using the message ID/number (e.g. VL 001, which you should see, along with the long text, when you double-click on the message). -
Hi
any one can help me how to display the details in exceptions field traffic light . i am facing the problem in execption field. ALV lisst is displaying in all other field but not showing in exception field.Dear Chandan,
If you are using the functionalities of the class CL_SALV_TABLE, try to have a look at this program: SALV_DEMO_TABLE_COLUMNS
and if the class is CL_GUI_ALV_GRID, have a look at this program: BCALV_GRID_04
Just try to compare and analyze what is that you are missing...:)
You can fiund a lot of demo programs in the package: SALV_OBJECTS and SLIS
Hop you find this helpful..:)
Regards
s@k -
hi experts
i have itab having a field status and its data ( 'open' , 'complete')
pls explain the needed steps to be followed for setting the traffic light in ALV.
open --red light
complete -- green light.
pls, explain me the step by step procedure.
thanks in advance.
Regards
RajaramHi Raja,
Try this source coode and you can able to do it.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE'
i_callback_html_end_of_list = 'END_OF_LIST_HTML'
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
i_save = 'X'
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
*& Form end_of_list_html
output at the end of the list - not in printed output *
FORM end_of_list_html USING end TYPE REF TO cl_dd_document.
DATA: ls_text TYPE sdydo_text_element,
l_grid TYPE REF TO cl_gui_alv_grid,
f(14) TYPE c VALUE 'SET_ROW_HEIGHT'.
ls_text = 'Footer title'.
adds and icon (red triangle)
CALL METHOD end->add_icon
EXPORTING
sap_icon = 'ICON_MESSAGE_ERROR_SMALL'.
adds test (via variable)
CALL METHOD end->add_text
EXPORTING
text = ls_text
sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
EXPORTING
text = 'Bold text'
sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(normal)
CALL METHOD end->add_text
EXPORTING
text = 'Normal text'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
EXPORTING
text = 'Yellow triangle'
sap_emphasis = 'strong'.
adds and icon (yellow triangle)
CALL METHOD end->add_icon
EXPORTING
sap_icon = 'ICON_LED_YELLOW'.
display text(normal)
CALL METHOD end->add_text
EXPORTING
text = 'More text'.
*set height of this section
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
EXPORTING
id = 3
height = 14.
ENDFORM. "end_of_list_html.
Regards,
Ameer Baba. -
Problem when creating multiple traffic lights column in SALV...
Hello Experts,
I am using ALV display using the SALV(factory) method. My problem is,
only the last excception column shows. I making 3 exception columns. Below is my code:
gt_output[] = im_output[].
TRY.
cl_salv_table=>factory(
EXPORTING
list_display = ''
IMPORTING
r_salv_table = lcl_table
CHANGING
t_table = gt_output ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
lcl_functions = lcl_table->get_functions( ).
* Set all standard ALV functions
lcl_functions->set_all( abap_true ).
lcl_columns = lcl_table->get_columns( ).
lcl_columns->set_optimize( '' ).
* Set display to striped pattern
lcl_display = lcl_table->get_display_settings( ).
lcl_display->set_striped_pattern( cl_salv_display_settings=>true ).
*/Sort columns
TRY.
lcl_sorts = lcl_table->get_sorts( ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
lcl_sorts->set_group_active( ).
TRY.
lcl_sorts->add_sort(
columnname = 'EBELN'
subtotal = '' ).
CATCH cx_salv_not_found cx_salv_existing cx_salv_data_error."#EC NO_HANDLER
ENDTRY.
TRY.
lcl_sorts->add_sort(
columnname = 'EBELP'
subtotal = '' ).
CATCH cx_salv_not_found cx_salv_existing cx_salv_data_error."#EC NO_HANDLER
ENDTRY.
*/Set column names
TRY.
lcl_columns->set_exception_column( 'EXCEPTION1' ).
lcl_columns->set_exception_column( 'EXCEPTION2' ).
lcl_columns->set_exception_column( 'EXCEPTION3' ).
CATCH cx_salv_data_error. "#EC NO_HANDLER
ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EXCEPTION1' ).
lcl_column->set_short_text( text-h01 ).
lcl_column->set_medium_text( text-h01 ).
lcl_column->set_long_text( text-h01 ).
lcl_column->set_output_length( '9' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
* TRY.
* lcl_columns->set_exception_column( 'EXCEPTION2' ).
* CATCH cx_salv_data_error. "#EC NO_HANDLER
* ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EXCEPTION2' ).
* lcl_column->set_short_text( text-h07 ).
lcl_column->set_medium_text( text-h07 ).
lcl_column->set_long_text( text-h07 ).
lcl_column->set_output_length( '15' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
* TRY.
* lcl_columns->set_exception_column( 'EXCEPTION3' ).
* CATCH cx_salv_data_error. "#EC NO_HANDLER
* ENDTRY.
TRY.
lcl_column ?= lcl_columns->get_column( 'EXCEPTION3' ).
* lcl_column->set_short_text( text-h08 ).
* lcl_column->set_medium_text( text-h08 ).
lcl_column->set_long_text( text-h08 ).
lcl_column->set_output_length( '23' ).
CATCH cx_salv_not_found. "#EC NO_HANDLER
ENDTRY.
Hope you can help me guys. Thank you and take care!
Edited by: Viraylab on Feb 15, 2008 3:50 PMyou can only define one exception per alv table. it's a limitation.
if you require more than one traffic light, use icons instead
Maybe you are looking for
-
I lost all my photos and contacts after updating my Iphone 4 to IOS 5.1.1?
Hello there, I'm in deep stuff and I seriously need help.....Yesterday I plugged in my Iphone 4 to Itunes for a back up after the back up was done it asked me to update my Iphone so I did after it was done it asked me to restore it and I did but some
-
Anyone Else paying top tariff for an inadequte ser...
Hi. I would just like to ask if anyone else is having the issues that I'm experiencing with BT. I have been with BT for many years & have had the same problem all this time. Basically I have a problem with my broadband speed. BT's website tells me on
-
Music in my playlist are grayed out and I'm not able to play from the Windows nor my devices
I tried syncing and the songs are bypassed while playing from a playlist. Help!!!
-
Hi, I want to know one thing, is it possible to generate an in memory image that means a small image which is randomly generated . i want to show this image in a jsp page. my requirement is that i don't want to save this image in the server side. jus
-
Hello Team, We are implementing DMS for loading of drawings, pdf excel and word files for the customer in the content server. As i am new to DMS i had earlier posted threads and have got very large useful help from this forum. Now my doubt is which a