EWA报告里的'security notes'

关于生产系统的EarlyWatch Alert报告中有这么一段话:
10.1 Security-related SAP Notes
Vulnerabilities exist in this system that can be closed easily. We found relevant security-related SAP HotNews that have not been applied.
Recommendation:
Apply relevant security-related SAP HotNews and Notes. An overview about such notes is published on Service Marketplace at /securitynotes.
To obtain a list of relevant security-related SAP Notes that can be applied easily, run the tool RSECNOTE in transaction ST13. It will provide a detailed list of the vulnerabilities discovered and the corresponding SAP Notes for correction. More security issues may exist.
For more information, refer to SAP Note 888889.
在st13里运行报表RSECNOTE能看到很多note需要安装。有些note是增加检查权限等。
我担心note安装上去后对现有用户现有操作有影响。例如用户现在操作正常,但安装note后用户操作就失败。
请问大家在实际情况中安装 Security-related SAP Notes吗?

Hello Mary,
Sorry for the late answer.
So you go to the "Change Management" workcenter, after "System Recommendation" then you have to choose the solution where your system is.
You can select the interval, for exple, the beginning is the last time when you applied security notes and the end is now.
And after you click on "apply filter", the job launched will calculate performance notes, security notes, corrections notes.
After you just have to click on security notes and select all these, and download it in your system, in order to know if you can apply it.

Similar Messages

  • EWA does not report security notes missing and java systems

    Hello guys,
    Our early watch report don't contain section 7.1 with security notes missing in the system.
    We have solution manager 7.0 with ST-SER 700_2008_1 SP4.
    What do we need to configure so that ewa reports security notes missing?
    Another doubt, how can I get the list of security notes missing in java stack system like portal?
    thanks.
    regards,
    Filipe

    hello Filipe
    Below is a line from the SAP note 888889.
    "In the SAP EarlyWatch Alert report, the "Service Preparation Check" unit complains that Note 888889 is not implemented.  As a result, the check for security-relevant notes can only be carried out partially in the "Security" section."
    Looks like that could be the reason for that.
    For JAVA stack there is no note concept.
    Thanks & regards
    bala

  • Web service security not configured

    Hi All,
    We have new PI system 7.1 ehp1, as an initial step installation is done including post installation.I have a task of checking if
    everything is in place as the same have to be confirmed to the team which did the installation.
    When i open RWB , i could see a message with warning "WS security not configured". aprat from this everything seems to be
    fine.
    Can anyone guide me on how to set us WS security and what is the use ,importance of having that configured?

    Hi,
    I dont think you have to configure Message level security configuration manually, i have done instaltion of PI 7.1,i have not seen any step like this.
    by default it will come after completion of postinstaltion succesfully.
    my advice better to move thread to SAP NetWeaver Administartion forums,you may get good replies./
    Regards.,
    Raj

  • Looking for a free app for secure note taking with search feature (unlimited)

    Hi dudes,
    As the topic suggests, I'm looking for a free app for secure note taking with search feature without any restriction on the number of notes or any other major restriction. I already use HiDisk (which lacks search feature), and security note+ (which has limitation on the number of notes). I also have used My Disk which its search feature doesn't work correctly (it's buggy).
    Thank you.

    One named NotePad is free, saves as .txt files.
    Another, WriterRoom, costs $1.99USD, and saves as .txt and .doc files.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Item level security not working when placed in a portlet page

    I have three page links linking to separate pages and have two of them with item level security turned on for specific groups with view privilges. I have the access for those groups with view privilges in the page level as well. I have published that as portlet and placed the portlet in another page which has view priviliges for the groups specified in item level as well.
    But I notice that when i place the portlet in a page, the item level security is not working.
    Item Level Security Not Working for Items Placed on a page and published as portlet and placed in another page. Is there some work around for this.
    Thanks
    Valli

    Would you please clarify for me? Is the problem that unauthorized people can see the portlet, or that unauthorized people can see the links?

  • How can I acces Secure Notes from Keychain on my other Macs?

    I have build up many Secure Notes in Keychain with important stuff and I'd like to be able to access these notes on my four Macs and other Apple devices. Is this possible? If not, maybe a poor alternative would be to create a secure .txt file and store it in iCloud? Any better ideas?

    Put the photos you want to upload to your iPhone in an album in iPhoto.  Connect the iPhone to the Mac and launch iTunes. 
    Click on your iPhone icon
    and then on Photos
    Next check Sync Photos and Selected albums.  Find the album with the photos you want to upload and select it. 
    Lastly click on the Sync button.

  • Web Service Security not configured on this component.

    Hi Experts,
                           Before configuring the scenario, i went to RWB to check whether the comopnents are in active mode or not.
                                  Integration Engine XID 
                                  Business Process Engine XID 
                                  Mapping Runtime XID 
                                  Adapter Engine XID 
                                  Integration Engines
                          All components are in Green mode  Except Integration Engine, The Integration is in yellow mode
                           and shows the following details.
                         Details for 'Is Web service security available?'
                           Web Service Security not configured on this component.
    Can you give the solution for this.

    Hi,
                      1, While sending idoc from sapR/3 to PI , in r/3 sm58 shows the foll error:
    "No service for system SAPQA,client 200 in integration directory"*
                               Even the Bussiness sytem pointing R/3.
    From your initial post, it appears that you are using XID system and from above error, I believe you are trying to send the IDoc from QA system. R3 dev will communicate to PI dev, so verify the partner profile and ports in your IDoc Header settings.
                         2, When i execute the tcode sm58 in PI   it shows the following error:
                                   "Syntax error in program SAPLSXI_AC_CACHE _REFERESH"
    I am kinda confused how come sm58 tcode can show an error for this program, as sm58 is for checking the transactional RFCs and  SAPLSXI_AC_CACHE_REFERESH is for XI Cache refresh for Alert Category. Might be some one else can explain this.
                         3, WHEN I EXECUTE THE tcode SXI_CACHE
                                             Under the *STATUS OF RUNTIME CACHE
                                                           Unable to refresh cache contents
                                                           Error during last attempt toreferesh cache
                                                             (red colour triangle leading above both)
    Check this SAP Note 764176, might help in your situation.
    Worth reading - http://help.sap.com/saphelp_nw04/helpdata/en/0d/28e1c20a9d374cbb71875c5f89093b/frameset.htm
                        4, Still there is no messages in Message monitoring.
    Obviously because of error # 1, you are unable to send IDocs, how come you expect messages to reach PI ... strange, isn't it
    Hope this helps.
    Regards,
    Neetesh

  • Recovering secure notes from keychain

    I recently had my 2011 Macbook Pro's logic board fail on me so I bought a new MacBook Pro and just finished restoring my old Time Machine Backup.
    Much to my dismay, all of my secure notes (and maybe some of my website passwords) are nowhere to be found in the Keychain Access program. I have tried to restore my 'login(dot)keychain' from User/Library/Keychain on my TM backup, but the secure notes are still no where to be found. My secure notes are where I keep ALL of my passwords for everything and it is a major major inconvenience that I cannot access them.
    Does anyone know what I can do?
    (If it is of any use, in the Keychain folder in my TM backup there are several files named something like login keychain Sbx76tv)
    Help is very much appreciated,
    Ajay

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    ls -@Oaen L*/Keyc* | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message.
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.

  • In SOLMAN after applying security notes warings are coming

    Hi All,
    Please help here
    We have applied some security notes in SOMAN Dev & made the TR for the same
    after importing the TR in Live we are getting warining.
    log detail is as below
    Post-import method SCWN_AFTER_IMP_METHOD started for NOTE L, date and time: 2010111705264
    Beginn: After import method for SAP Note 0001379987
    No release data for Note 0001379987 in the data file in the request
    End:    After import method for SAP Note 0001379987
    Beginn: After import method for SAP Note 0001380710
    No release data for Note 0001380710 in the data file in the request
    End:    After import method for SAP Note 0001380710
    Beginn: After import method for SAP Note 0001381719
    No release data for Note 0001381719 in the data file in the request
    End:    After import method for SAP Note 0001381719
    Beginn: After import method for SAP Note 0001402132
    No release data for Note 0001402132 in the data file in the request
    End:    After import method for SAP Note 0001402132
    Beginn: After import method for SAP Note 0001412774
    No release data for Note 0001412774 in the data file in the request
    End:    After import method for SAP Note 0001412774
    Beginn: After import method for SAP Note 0001430970
    End:    After import method for SAP Note 0001430970
    Execution of programs after import (XPRA)
    End date and time : 20101117052647
    Ended with return code:  ===> 4 <===
    we checked and could see these SAP Notes coming in warning message has been implemented in our Dev & Live suuccessfully
    still waring is coming
    please help here to avoid this warnings
    Regards,
    Vyash

    Hi,
    Regarding the message "No release data for Note XXXXXXXXX in the data file in the request"
    You can normally ignore this warning.
    The warning's meaning:
    When a Note (R3TR NOTE) is transported, the release data for the
    software components affected by the Note is normally transported too. If
    a transport request contains several Notes, however, the release data
    is only transported with one of the Notes, and not with all of them.
    When a transport request containing several Notes is imported, the
    system issues a warning for all Notes that do not have release data
    transported with them.
    If the system issues this warning for all Notes during a transport
    request import, however, this might mean that the data in the target
    system is incomplete. If this is the case, the system will issue an
    error message when the imported Notes are displayed with transaction
    SNOTE.
    You can solve this display problem by downloading one of the Notes again
    from SAP Service Marketplace. The functionality of your system is in no
    way impaired.
    Hope the above information could be helpful to your situation.
    Kind regards,
    Fabricius

  • Insecurity of Keychain Access: "secure" notes visible during authentication

    Sorry if this has been discussed before, but I'm not keen on wading through 137 pages of discussions.
    I recently discovered Keychain Access' ability to create "secure notes," and thought this would be a wonderful way to keep my serial numbers, bank accounts, and other sensitive information secure.
    However, I just tried to actually decrypt this information for the first time, and was rather shocked. When you attempt to open a secure note, and select the "show note" checkbox that prompts the "Deny / Allow Once / Always Allow" dialog box, the dialog box contains the "secure" information from the note!
    In my example, which you can see here (http://www.justinreese.com/media/images/secure_bbedit.png), the entire text of the note is included in the dialog, previous to any password authentication. Of course, because I'm reusing the login keychain, I understand that it's already been decrypted upon logging in; however, I was under the impression that using Keychain Access to store secure notes and other passwords offered a secondary level of protection, and that even if someone were able to compromise my system while I was logged in, at least that sensitive data would remain secure (the way a dedication application such as Wallet or Yojimbo would do it).
    So... is this a bug, an oversight, or simply my own poor planning in using the login keychain to store secure information?
    Thanks to all.
    17" Powerbook G4/1.5Ghz   Mac OS X (10.4.6)   Stock + 1GB of RAM
    17" Powerbook G4/1.5Ghz   Mac OS X (10.4.6)   Stock except 1.5GB of RAM

    My suspicion is that when you created the note, in the "name" field, you used "paste" intending to paste "BBEdit 8 Registration". However, if the clipboard at the time had contained multiple lines, the "Name:" field would then contain the entire contents (Owner Name, Email Address, etc), although it might not be immediately apparent since the main "Keychain Access" window would only display the first line. However, when asking for authentication, the full "Name" is displayed. This scenario is easy enough to replicate.
    The odd thing is that even if the "Name:" is subsequently edited to remove the extra lines, the "authentication dialogue" seems to continue to ask for authentication using the "old" name... it's probably being cached somewhere but I haven't been able to track it down.
    So in this case, I would call this "user error" for putting "secure" info in an "insecure" field in the first place, but there is definitely some sort of bug / oversight / slopiness in that the authentication dialogue doesn't update - so in effect it is asking you to authenticate for one thing, when in reality it is authenticating something that might have a completely different name. That sort of thing might open up "spoofing" opportunities, but for a user's personal keychain, I would suspect that anyone that can get close enough to do something with it would have opportunities to do far worse. Still, it can't be a good thing...

  • How to implement the security notes in Java System.

    Hi All,
    For the ABAP systems we use RSECNOTE to implement the security notes, but how do we do that in Java systems?
    Any reference or guidance will be of great help.
    Thanks,
    Akash.

    RSECNOTE is for ABAP only, and I dont think there is any equivalent for Java.
    For Java , security note will guide you on how to implement.
    It could be manual changes or via SDM or JSPM.
    Regards,
    Pinkle

  • Password Manager Viewer - Cannot scroll secure note

    Hi!
    I exported my passwords from Password Manager using "Create a password viewer program" which works fine on my other computer (which is not Lenovo). Except when the secure note is a bit longer and because textarea is disabled i cannot use scroller.
    Im using Password Manager 4.0 Build: 0024.00
    Thanks.
    Screenshot:

    I also tried with Password Manager 4.4 but story remains the same.

  • SAP Security Note 1487730

    Last week we saw SAP releasing its SAP Security Notes as per its SAP Security Patch Day Practice .
    One of thenotes released was related to a BUG FIX in a Kernel as per note 1487730
    https://websmp130.sap-ag.de/sap/support/notes/1487330
    Now the issue goes this way .
    We are on Kernel 7.01 SP Level 79.
    According to the NOTE we need to be atleast on SP Level 103 .
    When I check out at Marketplace I can only Find SP Level 111 which is the latest and released on 14.10.2010 ie. 2 days after the NOTER was released .
    Apprantely we follow a Thumbs Rule here to Implement the Kernel which is lower than the latest Kernel .
    The issue is I cant find Kernel SP Level 103 .
    Is it safe to go for SP Level 111 .
    Our Database is ORACLE 10.2.0.4
    OS PLatform :- Solaris Sparc 64- Bit NON UNICODE
    Regards,
    Ashish .A. Poojary
    Edited by: Ashish Poojary on Oct 21, 2010 7:10 AM

    Hi Ashish,
    Generally the rule of N - 1 is followed for SAP Application patches and not for kernel.
    You can go for latest kernel, it will not be any problem.
    Thanks
    Anil

  • After upgrade to Tiger, Keychain does not show Secure Notes

    I've just finished upgrading from Panther to Tiger. I began with a Psync backup, did a fresh intall of Tiger on the boot drive, and have migrated user data manually. Everything is kosher except that Keychain 3.3 is not displaying any of my Keychain 3.1 Secure Notes.
    There doesn't seem to be anything wrong with the keychain itself. I can open it under Keychain 3.1 and it displays the notes just fine. I've also run Kechain 3.3 First Aid and it doesn't think there is a problem either.
    Any clues?

    I solved my problem, and of course the answer was staring me in the face the whole time. I keep a separate keychain for notes and certain other passwords, and this keychain had to be initially opened manually by double-clicking it. Information about secondary keychains is stored in the Keychain preferences file (which I had migrated over), but apparently was not enough to get Keychain 3.5 to open the file automatically. The keychain file only needs to be opened manually one time.
    Hope this saves somebody else a few minutes of frustration.

  • Do SAP Security Notes contain hacker and/or virus defence?

    Dear SCN fellows,
    I am new to this community and generally new to asking for SAP help in discussions and blogs.
    I need some advice on whether SAP Security Notes contain hacker and/or virus defences?
    I am investigating a companies SAP Security settings against its policy and global market standards.  I have identified that since our SAP rollout SAP Security notes patches have not been maintained.  RSECNOTE provides a large list of missing security notes.  I'm writing a report and what to confirm whether these notes offer any advice, support or notification of hacking or viruses.  Similar to Internet security software I guess.
    Can anyone advise if my thoughts and questioning is heading in the right direction or have I got the concept of SAP Security Notes completely wrong?
    Thank you kindly.
    Paul

    Hi Paul,
    I need some advice on whether SAP Security Notes contain hacker and/or virus defences?
    SAP releases respective security notes as per the loophole identification.  Once you run RSECNOTE you get the list of all applicable notes to your software release.
    Applying these notes will help you to remove the vulnerability SAP identified, So yes it contains solution to remove vulnerability.
    I'm writing a report and what to confirm whether these notes offer any advice, support or notification of hacking or viruses.  Similar to Internet security software I guess.
    Could you please elaborate it is not that clear to me.
    BR,
    Mangesh

Maybe you are looking for