EWM - Inbound Delivery Notifi. - Error on Activation

Hi,
I have configured ECC 6.0 with EWM 5.1. I have created a delivery and distributed to SCM 5.1.
When I try to activate the inactive version in EWM, it gives me the following error
Field Item: Person Entitled to Dispose is a required field for the action HDR: Activate Document
Field Item: Stock Type is a required field for the action HDR: Activate Document
Field Item: Owner is a required field for the action HDR: Activate Document
Am I missing any configuration?.
Please let me know.
Thanks & Regards,
Sat

Hi Sathese,
could you please be so kind and let me know what your SCU was missing?
I'm facing the same error in EWM.
Thanks a lot in advance and regards,
Martin

Similar Messages

Error while activating Inbound Delivery Notification

Hi,
I have created and Inbound delivery in ERP, the material is batch managed and packed with HU. Once saved on ERP system, I find the Inbound Delivery Notification in SCM EWM system with HU, material and batch number appearing. Up to this point all good.
However, when I am trying to hit the button 'Activate' so that I can create Inbound delivery, system comes up with error message - 'Please specify an external number range' (message NR753) I have no idea where it's coming from.
For further information - I am using standard Doc Type INB with Doc Cat. PDI and it's assigned with an Internal Number Range.
What's missing?
I help will be rewarded.
Thanks,
Amit

Thanks Virendra,
You have pointed to the right direction. Basically, without checking for the posts here, which are really helpful, I went to system one more time only to find that I have made a configuration error. I am just sharing if anyone else in future faces same situation, he/she can be benefited out of it.
In EWM system - I had created number range with transaction SNRO for object /SCWM/SSCC putting 01 (from 1 - 1999999) as internal and 02 (from 2000000 - 2999999) as external number range.
In EWM system - I had assigned the number range in following place:
Extended Warehouse Management > Cross Process Settings > Handling Units > External Identification > SSCC Generation Acc. to EAN128 > Maintain SSCC Generation for Each Warehouse Number
In ERP system - I had created number range with SNRO for object LE_SSCC with same attributes as above. i.e. 01 as internal and 02 as external.
Now when I packed the inbound delivery in ERP system, I used packaging material for which the number range is internal (i.e. 01) and it created HU with SSCC number. Up to this all were good. But when the same HU transferred from ERP to EWM system, SAP treated the HU number coming from ERP system as external HU number (which is logical) but it was looking at number range 02 (since it was marked as external) but was failing to match as the allowed numbers doesn't fit along with the number transferred from ERP system. Hence it was giving error.
As a solution I declared 01 as external and 02 as internal and also inverted the number range assignment for SSCC generation in EWM system.
It created Inbound Delivery successfully.
Thanks all of you for helping on it.
Cheers,
Amit

Create Warehouse Request for Inbound Delivery Notification

Dear Experts,
I have created Inbound Delivery in ECC and Inbound Delivery Notification has been created in SAP EWM.
Kindly suggest me how and where can I create Warehouse Request for Inbound Delivery Notification.
I donot see any transaction or link to create Warehouse Request for the Inbound Delivery.
I am new to EWM. Please suggest.
Regards,
Shetty

Hi,
After the Inbound delivery has been distributed to the EWM environment the Inbound delivery notification (IDN) is created. So far so good but after the IDN has been created you will have to activate it manually if it didn't automatically. In order to activate it please go to transaction /n/SCWM/IDN - Maintain Inbound Delivery Notification and execute it for all of the IDNs that are not activated. Then you activate it and it creates the ID.
After the ID has been created, if the system (Post Processing Framework) didn't create the tasks relevant for receipt than you have to go into the ID and choose Inbound Delivery - Follow-On Functions - Warehouse Tasks and create and save the warehouse tasks relevant for receipt.
All the best,
Claudiu Maxim

EWM inbound delivery

Hi all,
We are trying to reproduce an inbound delivery flow from R/3 (ECC 6.0) to EWM ( SCM release 5.1).
We created an Integration Model, and it runs in the correct way, because Product, Location and BP Data were created correctly in SCM.
Now, when we create an inbound delivery in R/3 with a Packaging material, in SCM an Inbound Delivery Notification is created, but the system does not create
in automatic way the linked Inbound Delivery in SCM, as the Sap library shows.
Running SLG1 transaction one of the error messages shown is: "HU number XXXXXXX is internal and cannot be assigned externally"
Can someone help us?
Thanks in advance
Regards,
Rossella.

Hi Antonella
Looks like the PPF actions which create the INB dely are giving an error since the HU settings are not complete. Make sure that the packing material in EWM (which is CIF from ERP and WH Product has been creared) has a valid HU type entered. Also ensure that the HU number range in EWM (external number range) is in sync with the internal number range if HUs created in ERP.
Hope this helps
Thanks
Deepak Joshi

Inbound delivery notification in scm

hi all,
i have created in bound delivery in ecc 6.0 , maintain integration model for the same for data transfer between sap erp and scm. how to create inbound delivery notification based on the inbound delivery received from sap erp.
kindly guide me out for creation of inbound delivery.
Regards,
velu

Hi,
You need to map the delivery types and item categories first.
Regards,
MdZ

Inbound Delivery Notification Document is missing EWM

Dear Experts,
Inbound Delivery document is created successfully in ECC, Prior to that PO is created in ECC which is replicated in SCM due to active integration model, based on the PO inbound delivery document is created, but it is not replicated automatically in SCM, I am not able to figure what is missing, is there any special customization is needed to send delivery document to EWM, Give your valuable suggestions.
Thanks and Regards,
Babu

Hi Babu,
1) Check whether the data is getting struck in inbound/outbound queues
2) Check is there any inconsistencies
3) Check is there active integration model for delivery documents
Regards
R. Senthil Mareeswaran.

Inbound delivery idoc error in segment e1eld20

we are receiving delivery idoc from the vendor, so this is delivery will be created as inbound delivery in our system, so in the segment E1EDL20 field VBELN(let say 'ABCD') is the outbound delivery number of the vendor ( i believe), but when is try to process this idoc it gives the error as 'delivery ABCD does not exist' ( it's obvious that the delivery 'ABCD' will not be in our system because it's a vendor delivery number), can some body please let me know whats wrong with this E1EDL20-VBELN.
Thanks,
Kashif

HI,ALL
Thanks for your replies and documents.
Now I find the problems lies in the error connection between R/3 and BW. IF the autoconfiguration is completelly correct , the table RSBASIDOC in both system should be added one record.But now when the source system is activated successfully ,the table in R/3 side has no entry while the BW side has one entry .juding from this ,there is no BW system connected to the R/3 ,which is proved when I fill the setup table for LO datasource an error message shows that there's no BW system is connected to the OLTP system.
How can i figure this issue out ?If I want to do an automatic configuration ,what shall I do ?

Inbound delivery distribution error

Hi,
I'm not being able to distribute an inbound delivery from the ERP to the EWM system.
Everyt time I get the error:
"Item XXX is not supported in EWM and cannot be distributed "
I've had earlier successfully transfered the item in the EWM system. Cannot find the cause of the error.
Anybody who has faced a similar error, kindly help.
Regards,
Oritra

Hi
check Sloc for line item.
Regards
Suraj

L9 528 - Material cannot be used in Inbound Delivery because QM is active

Hi Colleagues,
So we have HUM products going into a warehouse managed location and we know that we cannot create an inbound delivery for these items if QM is active without 'HU inspection' selected in the QM inspection type of the material master
So the question
Is there anyway round this so that we can trigger the inspection lot creation at the goods receipt posting rather than at the HU level in the packing of the inbound delivery
Does anyone know if SAP plan to support this in the future?
Thanks
Steve

We are not using HUM however using WM. Nonetheless, the problem persist while creating inbounds.
We are trying to use the following approach to address this problem.
uncheck 'relev. for putaway' indicator from 'ELN' item category thus enabling VL31N to by-pass the hard stop incurred due to QM activation.
SAP's reason for this hardstop is to avoid inconsistencies that may arise when TO's are created for inbound deliveries before GR is posted. This scenario does not pertain to us since TO for inbounds before GR is not applicable. Therefore, we are enabling the above configuration. By doing this, we are breaking the link between inbound delvy's and WM, and thus disabling the functionality of creating TO's referencing inbound delvy's (transactions like LT03, LT0F become irrelevant).
But, this process will not work if we implement HUM since standard SAP will not allow to create a putaway TO referencing a TR or a material document. It becomes imperative to create a TO referencing a delvy, but this configuraton will break that link hence it will not work.
Best Regards.

Inbound Delivery Notification(IDN)-Activation

Hi Folks,
Hope every one is doing great. I am trying to receive material in a warehouse managed by EWM. The problem is I am not able to activate my IDN neither my PPF setting can do it automatically. When I tried to activate it, I get the following messages
Field Item: Person Entitled to Dispose is a required field for the action HDR: Activate Document
Field Item: Stock Type is a required field for the action HDR: Activate Document
Field Item: Owner is a required field for the action HDR: Activate Document
I also see that these field items are empty in IDN but I can't input it as the fields are not editable in maintain IDN tcode. I've mapped ERP plant storage loc and ERP logical system to an availability group     so I don't understand why EWM is not able to determine a stock type for the material. I have maintained warehouse product master for the material I am receiving with a party entitled to dispose, so I can't understand why EWM is not able to pull the Party entitle to dispose from the master data. I also see that in the config table where we map ERP plant to storage loc, the party entitle to dispose is blank but I can't change it. BTW, what is this Owner? Any idea folks? any kinda would be great, appreciate it.

Any pointers folks?

Inbound delivery error in SCM

Hi Experts,
While transferring delivery document from ecc to SCM, It encounters with the following error in the SCM side
Field Header: Receiving Office: Location No. is a required field for the action HDR: Save Node
Please help me to resolve.
Thanks in advance,
Pio

Problem is solved.
In my case problem was when I tried activate inbound delivery notification in EWM.
Go to in SAP Easy Access in EWM system -> Extended Warehouse Management -> Master Data -> Maintain Supply Chain Unit -> Choose your SCU and press enter. Then click on 'Alternative' tab and sure that row 'RO - Goods Receipt office' exists.

Error while activating IDN in EWM

Hi
Can anyone please help me with the following error? I am trying to activate an Inbound Delivery Notification in SCM5.0 and getting the error 'Application Error'. there is no message longtext or help available. I have configured the inbound delivery document and item type determination as follows. can anyone please help if the settings are correct? what i need to do to get rid of the error?
Doc type determination
Doc cat.----Doc.TypeItem cat.Item typeDoc cat.----Doc type
blank--blankblankblalnkPDI--
INB
Item type determination
Doc cat.-----Doc type---Item type grp--hier.typeItem type--Item cat.--
Item type
PDI--blankblankblankblankDLV--
IDLV
Thanks in advance!

Hi Sharad,
Thank you for the reply. There is no application log available in SLG1. I have configured the number range intervals for all documents in Warehouse, including the Inbound Deliveries. Can you think of anything else which might be causing the issue? does the Document and Item type determination seem okay? Please let me know.
Thanks & Happy Holidays!

Run time error while Creating IDN and Inbound Delivery

Hi All,
I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
Regards,
P@M

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

HU GR Message Inbound Delivery EWM

Hi Experts,
If in EWM inbound delivery I have created multiple HU's and warehouse task for each HU for putaway.
While confirming using RF-Putaway by HU option, one GR message is getting posted for 1 HU.
Can you please suggest, is there any way to control this. We would like to see the single GR message when putaway WT's are confirmed for all handling units.
Thanks in advance.
Sandip

In in the Interfaces, in Inbound Delivery, there will be an option. Send entire Goods Receipt at end of Inbound Delivery. Can you try changing that.
Try using Option 1 in below screen.
Regards,
Sathish

Inbound Delivery Modification n follow on activities

Hi,
Is there a way to modify EWM Inbound delivery once it is locked for processing. For e.g. I received an Inb del in EWM, due to me not specifying the storage bin for the warehouse task, I specified the bin in customizing. Now, I get the same error message that storage bin is not able to be determined. Do I've to resend the inbound delivery from ECC to EWM again after rejecting this. How does the process work?

Look at the Confirmations configuration on service POs. As far as my understanding the two processes are not either or it is the sequence. The inbound delivery is an indication that Goods receipt or Service execution is impending. Once goods are received or service executed, it is confirmed in the system and that triggers the posting of GR

EWM - Inbound Delivery Notifi. - Error on Activation

Similar Messages

Maybe you are looking for