EWM Scrapping after quality inspection

Hi guys,
I'm trying to work out a scenario in EWM but I'm not sure how the standard process should work, hopefully you can help.
I'm receiving a returns shipment in my warehouse. After Goods Receipt, I transfer the goods to my quality inspection area using POSC. Here, I enter the inspection result via /SCWM/QINSP. Depending on the inspection result, the follow-up task is determined.
The current behaviour is as described below:
1. If the product is OK, it can be putawayed via the already exising warehouse task.
2. If the result is not OK, the product needs to be scrapped. Currently, EWM creates a Warehouse Task to my putaway storage type, and assigns stock type S5 (Scrapping from Putaway) to the product. When I confirm this Warehouse Task, the stock is moved to the putaway area and the stock type is changed to S6 (Scrapping from Warehouse).
Is this correct behaviour? I would actually expect that the scrapped stock would be moved to the scrapping area (storage type 8040), and not to the putaway area...
Thanks & regards,
Oliver

Hi Juergen,
The Warehouse Process Type for decision "not ok" (Follow-up action D - Scrapping) is 4020 (Scrap).
The Destination storage type / bin for this whse process type are 8040 / SCRAP-ZONE.
As far as I can see, this is correct, right?
Appreciate your help.
Regards,
Oliver

Similar Messages

After quality inspection

Hello,
After quality inspection what happen to the material??

Please note the example
While you are in QA11 for stock posting scree will as like below where 500 is total quantity to be posted which is presently in Quality stock
Quantity Posted                                 To be Posted
Total                          0.000                                500
To unrestricted use 0.000
To scrap                   0.000
To sample usage       0.000
To blocked stock       0.000
To new material         0.000
To reserves               0.000
Return Delivery           0.000
You can split the quanty 500 to be posted as you wish like
Quantity Posted                                 To be Posted
Total                          0.000                                500
To unrestricted use 0.000                                 400
To scrap                   0.000
To sample usage       0.000
To blocked stock       0.000
To new material         0.000
To reserves               0.000
Return Delivery           0.000                               100
and press enter
Thanks & Regards
Rajendran
Edited by: Poovancheeri Rajendra on Feb 21, 2011 4:32 PM
Edited by: Poovancheeri Rajendra on Feb 21, 2011 4:33 PM

Batch creation after quality inspection

Hello friends,
I am using a raw material with batch management. I dont want to create batch when goods receipt takes place in MIGO . I want to create batch when i post quality stock to unrestricted use after quality inspection.
How can i do this?
Please help me.
Thanks!

hi kiran
When you are creating a Gr for raw material (for which you have activated Batch MGt) ,If you do not enter Batch number then Batch number is not be attched to raw material....but when you process the lot /take UD then By batch Magt you can create/asign batch to raw material.
this is possible in Batch MGt.
.I hope you have now created char (MIC with Class type 23) now You must have used it in QP01.
2.Now create a lot using MSC1N
3.create a inpecion lot(migo)
4.While result recoding system will ask for batch,Enter bach you have created in MSC1N..
5.Take UD .save
All the char will be get copied to batch as per spro setting .these result can be seen in batch MSC3N.
settings:
Go to QCC0->Quality inspection->Inspection lot completion-->transfer inspection decision to batch
Regards
Sujit Gujar

MIRO after Quality inspection..?

Hi guru
Can anybody explain me , how to make the MIRO process after Quality inspection done.
1. MIGO done,
2. Materials moved to quality
3. If materials ok then MIRO or If not ok the system should not allow to do MIRO. is it possible in SAP
If yes what are all the configuration settings..
Thanks
sap-mm

HI,
I was telling you the case if QM is not active.
if its active
General Procedure for a Goods Receipt Posting
When goods are delivered to a warehouse, they are frequently held for inspection before being posted to unrestricted-use stock for consumption or issue. If the control indicator for posting the goods to inspection stock is active for the inspection type, the stock is assigned a stock category that is retained until the goods have been inspected and released. Goods that are posted into inspection stock are not available for consumption or issue.
When an inspection lot is created automatically, all stock postings are carried out by the QM component. As a result, you can make stock postings using the functions within the scope of the usage decision.
The QM component creates an inspection lot and maintains the stocks for the material if:
QM is active for the inspection type
The control for posting the goods to inspection stock or goods-receipt blocked stock is active for the inspection type
The inspection lot is created automatically
The goods receipt process can be summarized as follows:
The goods receipt is recorded in the inventory management system.
- The quality level is checked
- The inspection lot is created (automatically)
- The quantity is posted to inspection stock or goods-receipt blocked stock (automatically)
- The sample size determined (automatically)
- The sample is taken (manually)
The goods are inspected by the inspector.
The inspection results are recorded in the QM component.
A usage decision is made for the inspection lot in the QM component.
- The quantity is posted to unrestricted-use stock
- The quality level record is updated (automatically)
regards

How to move the stock after quality inspection in wm

hi ,
if i am posting GR with PO for the material XXXX quantity of 10 it should not be posted in Warehouse. after completion of stock inspection in QM then only it moved to warehouse . But the problem is when i post gr in migo the transfer requirement created automatically...if i make this TR manual, two posting occurs one for gr posting and another one for manual tr...how to control this....
ex: matxxx-10 quantity
migo posted(no stock should be posted in wm)
after qc--8 quantity o.k
then we need to move this 8 quantity to storage bin.
how to achive this process in WM. (i already working manual TR it will create two posting)
Thanks
Muthuraman.D

Hi,
Use movement type 103 for GR. so, the goods will posted in to blocked stock. you deselect the auto TR creation for 103 movement type.
once the Quality inspection over the do the 105 to release blocked stock to unresticted stock. in 105 you activate the auto TR creation.
Now you may avoid double tr creation.
this you have to discuss MM consultant also. because of 103 & 105 movement type using.
SAM

Reverse Goods receipt after Quality Inspection...

Hi Expets,
I'm able to do the GR reverse after the Quality inspection Lot also using mb01 and mov type 102.The stcok is also updating as soon as i do the reverse. Here my questions are.......
1)Why I need to do the cancel of Inspection Lot since there is no effect on stock postings by cancellation and stock postings are effected by GR only.
2) GR = 10 qty
Inspection Lot = 5 Unrestricted, and for remaining UD for 5 has not been made.
here I'm able to do the reversal of GR for 10 Qty and I did also. and same time I,M not able to do the cancellation of Lot because the qty 5 is still pending, for this If i post the qty 5 to un restricted in the Lot and do the cancellation lot , the stock will be duplicated in mmbe. kindly guide me how to handle this type of issue....
where reversal of GR for full qty before partial Inspection qty for the lot and completing the inspection lot after GR reversal and cancellation of full Lot
Regards,
Sri.........

Hi Manu,
For wht Z-Tcode and programme has to be developed ?
Regards,
Sri......

Scrapping from Quality Inspection Area

I am trying to scrap the material from the Quality Inspection area. If i am trying to use 553/551 its not working its asking me to do the process through QM only.
So i tried to reject the lot in QA12, but unfortunately i am not getting the tab "Inspection Lot Stock" tab to post the material to the scrap. Please guid

Dear
check out your original thread/question and this one both are completely different & confusing !!
I am trying to scrap the material from the Quality Inspection area. If i am trying to use 553/551 its not working its asking me to do the process through QM only.
So i tried to reject the lot in QA12, but unfortunately i am not getting the tab "Inspection Lot Stock" tab to post the material to the scrap. Please guid
Now come back to your new question
Stock for the material was transferred to Quality Inspection area.
Now usage decision for inspection lot with origin 08 is Rejected.
How you have transfered the material to quality.which T code & mvt type you used ?
As i understand 323 should not create 08 inspection type lot !!

Control invoice verification after quality inspection

Dear all,
I want to restrict vendor invoice verification to be done after quality notification, I set QM control key 0007: Del. release, invoice block in the QM view of material master, then I post GR for a PO with inspection lot created, then I did invoice verification through MIRO it was successful without even a warning message.
Does anybody know how to control this?
Thx
Danny

Hi Danny,
MIRO will be processed, but you will get message as "Blocked for Payment". You can see the reason for block and clear the block in MRBR. Ensure that in PO indicator GR-Based Invoice Verification is flagged.
For more details Block the payment if inspection lot is not cleared by quality
Thanks & Regards,
Ramagiri

How to Cancel MIGO Document after Quality Inspection

Hi,
I have done
1). Purchase Order
2). MIGO
3). Quality Inspection
4). After that for some reason, i need to cancel the MIGO document. When i tried to cancel the MIGO in MBST, i am getting the below error. Kindly help me
Deficit of BA Stck.in qual.insp 10,000 EA : 101921 1100 1001 REGULAR
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 10,000 EA.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
Note:
The abbreviations in the short text of this message can have the following values:
BA = batch
OR = order
PL = plant
PR = previous period
PU = purchasing document
RE = reservation
SL = storage location
VC = consignment stock from vendor in storage location
Thanks
Dharmendra

Hi,
Check out this:-
Re: reverse migo..when UD -inspection is done...
Quality Inspection in MIGO
Cancel raw material goods receipt document in MIGO
pherasath

Material not getting reversed after quality inspection

Hi Friends,
I want to reverse a material document for material which has been cleared in the quality inspection step. But I am unable to do so. Can you please let me know if there is any way we can reverse material which has been cleared from quality inspection.
Regards,
Wasim.

Hi,
Please apply the note 175842 by this you can reverse the Quality inspection & cancell the Material Doc.
Regards,
Manish Jain

Quality inspection stock for scrapping

Hello SAP expert,
In MMBE there are 2800 PC in the Quality inspection SLoc 1005.We want to scrap those 2800 PC. We want to do this with MB1A, movement type 551 or 554. With movement type 551, the quantity must be transferred to unrestricted. For movement type 554, we can scrap directly from SLoc 1005.
When trying to do this, the error "Change the inspection lot stock of material 10009021in QM only" is shown. The person of the Quality department checked the inspection lots and canu2019t find something. So we donu2019t know where to look for this anymore.
Can you please help?
Thanks
Ryan

Hello,
I have noticed that they use MB1A, and with movement 551 (withdrawal for scrapping) and they said the stock will be transfer to UNRESTRICTED, then they do 554 movement (withdrawal for scrapping from quality inspection - reversal) which i think is a wrong process?
they can use movement 553 (withdrawal for scrapping from quality inspection) am i correct? to achieve they desired. and plus where can i find when i achieve to scrap the QI stock? where i can may the proof that the QI stock was scrap? in what tcode can i find this scrap number of material i done?
Thanks
Ryan

Good receipt in quality inspection

hi gurus
i have maintained quality inspcton set up in material master data. now when i do good receipt it is posted in quality inspecton stock. now query after quality inspection how to take stock from quality inspection stock to unrestricted stock .in between this how to do quality usage decision so that rejected material can be returned and for accepted material invoice cen be posted.if some one have snap shots for usage decision please send it my mail id
[email protected]
points will be rewarded.thnks

HI,
Go to QA 32 , you can see the list of inspection lots .
You can do result recording & Usage decision.
During usage decision , you can do the stock posting (Unrestricted , returm delivery) from the stock posting tab in UD screen.
Ref the link below for more details.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/QMIMUD/QMIMUD.pdf
Hope this helps you.
Regards
K.M.Arun

How to scrap specail stock in quality inspection...

hi guys:
I have a query, Is there any possible way to scrap the sale order stock in quality inspection without transferring it to the unrestricted stock and that also through inventory count(mi01,04,07),
Actually we have damage lighting stock which is received against sale order(automatically transferred to quality inspection), and customers are replaced with new units, then this stock is called back in head office, for this we have a complicated process in use, first this stock is scraped from suppose "a" storage location after transferring it to unrestricted, then loaded back to "a", to make an STR for it from Head Office.
So is there any way to scrap all special stock(complete storage location) against different sale orders at one go. whether the stock is available in unrestricted, quality inspection or blocked stock.
I hope I am understood.
Please help me to get through this complicated process.
Regards
Salar...

Thx you guys are fantastic; I appreciate your help;
below given is the post which has helped me, but there is some problem at the end, after the click of this point "11. (Click) in the gray box next to the session name and click . " there was nothing to proceed with, though I have posted the count through mi24 and post the difference with mi07, but still want to know what goes wrong with mi31, I have given the appropriate time for back ground processing....one thing to note there were 2 old inventory documents seen to be pending of the same storage location I was posting the count off, is this the reason of problem in processing of mi31,,,,,,please guide...
Hi Buddy This transaction is used to create physical inventory documents for multiple materials in your plant and storage locations. Inventory documents may be created and printed prior to the count date; however, the posting block should not be set until the day of the actual physical inventory count. 1. From the SAP R/3 System screen, enter transaction code MI31. 2. Click or press Enter. The Selected Data for Phys. Inventory Docmts w/o Special Stock screen displays. 3. Enter or select a value for each of the following required fields: - Plant (enter plant code) - Storage location (do one storage location at a time) - Name of session Remove the checkmark from the Materials marked for deletion field will exclude items previously marked for deletion from the inventory document. The default session name is MB_MI01. Enter your initials and the session number after the default session name to identify it as your own. Example: MB_MI01_WW1 - Max. no. items/doc - use 99 for main storage location; - use 300 for truck storage locations. - Planned count date - enter date of inventory count - Physical inventory number - enter fiscal year followed by plant number and storage location. Example: 2004FY60118071. MI31 Create Physical Inventory Documents (in batch) - Set posting block - check if count is immediate; do not check if creating batch documents ahead of the inventory count date. - Sorting u2013 click on and select Plnt- Stor.bin description-Material. 4. Erase any variants under u201CDisplay optionsu201D. 5. Click . The Batch Input Created for the Creation of Phys. Inv. Docmts screen displays. Enter through any system information messages or errors. 6. Click . The Batch Input: Session Overview screen displays. 7. Click in the gray box next to the session name to highlight row. Click . The Process Session {Session name} dialog box displays. 8. Select the Background radio button. 9. Click . The following message displays: u201CX session(s) transferred to background processingu201D. It takes approximately 5 to 6 minutes for the system to process a batch session. Please wait at least 5 minutes before continuing with Step 10. 10. Click in the gray box next to the session name and click . The Batch Input: Log Overview screen displays. 11. Click in the gray box next to the session name and click . The Batch Input Log for Session {Session name} screen displays. If the batch processing is completed the last line in the Message column should read u201CBatch input processing endedu201D. If this message does not appear on the last line adequate time was not provided for the batch process to be viewed. SAP continues the batch processing in the background. Use transaction MI24 to retrieve a complete list of Physical Inventory Documents created. 11. Record the physical inventory document numbers created. You will need the document numbers to print the inventory documents. Clicking on can print this list. 12. View the log for any errors generated. A material master record being blocked for updates at the time of processing may cause errors. Add the material to a physical inventory document using transaction code MI02. Regrds Yogesh
Thanks & Regards
Salar...

Need to send data, after Usage decision in quality inspection (QA11)

Hi all,
After Usage decision in quality inspection (QA11), i need to send some data like material number, qty etc to external database or to external party. is there anyway i can achive this in real time? real time means, it should send the appropriate data to external party after usage decision is made.
Thanks
Pabi

Hi,
You can change results recording in case the MIC in the inspection plan of the lot are marked as "long term characteristics", else it wont be possible to change result recording.
you can change the UD code only after giving the Usage decision.
you cannot change the defects recording.
Thanks
SUMIT

Sample still showing in quality inspection stock after usage decision completed

After process order completed, we have received 100 units as a quality inspection stock. After usage decision,( QA11), I have posted 98 units to unrestricted use and 2 units to the to sample usage
98 units successfully move to unrestricted stock.
However 2 units for sample still showing quality inspection stock.
I have checked MB51, mat document number for sample is 4900000160 and movement type is 331
Do you have any idea why sample still showing in quality inspection stock. It should consumed and zero out the quality inspection stock in MMBE

Hi,
Please check you MIC's control Indicators.
Is it tick on Destructive insp. under Sample tab ?
Please tick it and try again with whole process.
Destructive Insp. : You specify whether the sample is to be destroyed after inspection. This means that is no longer available. This quantity is used in the usage decision as the proposed quantity for the posting to sample.

EWM Scrapping after quality inspection

Similar Messages

Maybe you are looking for