EWQLSO Platinum and Node

Hi Guys,
I just bought EWQLSO Platinum and am about to purchase a new mac mini as a node machine. anyone has any experience with this? I heard somewhere that 3rd party plug-ins can't be noded. can anyone verify this?
thanks

Well, I run a lot of Logic plugs on my tracks. In combination with freezing you can get very far unless you use only EXS and 3rd party plugs.
There is plenty of reasons or situations that this would be valuable. Say you want several Space Designers, Sculptures, ES2... You can spend less time waiting for a freeze and balancing all that out ahd just continue working.
It's very useful for many users.
J

Similar Messages

P965 Platinum and E6600 won't go to 3GHz

Hello,
I have a MSI P965 Platinum and a E6600. Currently I have two sticks of Corsair Value Select 1GB PC-5300 RAM, rated at 667Mhz 5-5-5-15.
The E6600's stock is 2.4GHz, and I want to go to 3GHz. This should be dead simple - not only can the E6600 usually clock much higher, but 3GHz will only require a 333Mhz FSB (9 x 333), which means my RAM doesn't have to be overclocked at all since it is rated for 667MHz DDR2. I should be able to obtain 3GHz with a nice comfortable 1:1 FSB:RAM ratio without stressing the Corsair Value ram beyond specifications.
However, it just won't work. I seem to be having RAM instabilities at 667MHz 5-5-5-15 and 333Mhz FSB. The reason I say RAM is because Memtest86 freezes, and SuperPi has a 'not exact in round' error in 16M and 32M - which apparently means there is a problem with memory stability. Now, I know this sounds like the RAM is faulty, but I don't think it is, because when I run stock 266MHz FSB, the system is fine at 4:5 divider to make the RAM 667Mhz. It's only when I increase the FSB (and not the RAM at all) does the system become unstable. At 266MHz FSB and 667MHz RAM, my system will pass any stress test, but not at 333Mhz FSB and 667Mhz RAM.
I've upped the CPU voltage 3 notches to around 1.350 or so under load. My ram is at 1.9v, although I tried 1.95v too. I didn't touch the chipset voltage (should I?). My temperatures seem ok - I'm only using the stock Intel cooler, but it should be able to handle 3GHz fine. It hovers around 48c idle, 60c load according to Everest Ultimate (before it crashes in SuperPi), so it doesn't appear to be overheating while overclocked. Not great tempts but acceptable.
However, there are two things I've noticed:
- In the BIOS, if I select CAS to be 5 or 6, CPUZ still reports my ram at CAS3 (which my RAM can't do at 667Mhz), or 3-5-5-15. However if I select CAS4, it reports CAS4 properly (still unstable though), or 4-5-5-15. This is only a problem when I overclock the FSB - at stock FSB, the CAS timings are reported correctly. It could be an issue with CPUZ, but I doubt it. If there is a bug with the P965 Platinum not setting the CAS right when overclocking, this might explain why I'm having RAM stability issues even though I'm not overclocking the RAM - i.e. because the board is not using the right CAS setting. Is this a known bug? Also, I tried Auto SPD but it tried to use 4-4-4-12 at 667MHz (again, which this RAM won't do).
- When I run 333Mhz FSB and 667MHz RAM, the POST shows some sort of error message about the board not supporting CPU's with a 267Mhz FSB or something (which is weird, because 266Mhz is the stock speed *shrug*), and that it's resetting it. Sorry I can't recall the exact error off hand, but I can try the overclock again and provide it later on if needed. Anyway, despite the error message, the overclock still applies - it will boot into Vista 64-bit at 3Ghz, it just won't pass any stress test.
Is it possible a BIOS update could help me? I run V1.4, and even though I know there is a V1.8 now, no newer version mentions anything about fixing overclocking issues. I don't like to update my BIOS unless necessary (and I don't even have a floppy drive anyway, would need to figure out how to do it via USB).
Thanks for any help. I'm certain my RAM isn't faulty and I'm certain my CPU should be able to reach 3Ghz surely. I'm also pretty sure heat isn't an issue. I think maybe the board is trying to force CAS3 when FSB overclocking or something? That's my guess anyway.

Thanks for the reply!
Sorry, I should have mentioned I was definitely achieving 1:1 - I recall the confusion over why my RAM was trying to be 800+MHz at 667 and then I realized 533 actually meant 1:1, 667 4:5 etc, so I am definitely running at 533/1:1. I doubt this RAM would even post at 800+ MHz.
So updating the BIOS may help? Ok thanks, I guess I will update then. I don't see it in the "fix" list though on the site. Is there a way I can get a *full* fix/enhancement list for 1.5, 1.6, 1.7 and 1.8 so I know exactly what I'm fixing going from 1.4 to 1.8?
Also, does MSI support LiveUpdate BIOS in Windows Vista 64 yet? And if not, is there an official way to update via a USB stick? (no FDD here).

Confused - whats the difference between K8N Neo4 SLI Platinum and Diamond??

MSI web page says the Diamond has:
"Silicon Image's SATA RAID supports another 2 SATA II ports. Transfer rate is up to 300MB/s."
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=638
their Platinum page doesn't list the Silicone Image raid as a feature on the Platinum.
I have K8N Neo4/SLI Platinum and it has the Silicone Image raid - I'm using it now.
Can anyone explain this?
Another question: for both boards it shows: "NV RAID (Software) - - RAID function available for ATA133 + SATA HD drives or 2 SATA HD"
How can the Raid fuction work for ATA133 drives since the cables for SATA and PATA are different? What do the mean Raid for 133?
Thanks!!!
Tony

https://forum-en.msi.com/index.php?board=36.0
d/l a raid manual and all should be clear

Audigy Platinum and 56K PCI modem confl

I have had modem connection problems so I reformatted the hard dri've and reloaded the OS to get a clean start. Now, I have a conflict with the Audigy Platinum and 56K PCI modem. The sound card works great until I dial-out on the modem - at that point there is either no sound or a high-pitched tone is heard when a sound is played. Also, if I am activly connected to the internet and play a sound, the connection will drop and the modem will refuse to reconnect with various errors (no dial tone or port already open). The only way to reset the sound card and modem is to reboot. If I disable the Audigy card under device manager, the modem works great - connects and reconnects fine. BTW, this is the third PCI modem I have tried, all by different manufactures and chipsets, so I don't think it is a modem problem.
Some system specs:XP Home SP 2Audigy Platinum with the latest production drivers availableUS Robotics 56K PCI modem model #5660AAsus A7N8X deluxe motherboard with on-board sound disabled
The Audigy card is installed in a PCI slot that is not shared, also the Audigy card is using IRQ 5 and the modem is on IRQ using COMM port 3. Everything looks fine under Device Manager (no unknown devices or devices with errors). MSINFO32 shows no device conflicts.
Has anyone seen this before? Any workarounds? Any idea why the Audigy card would conflict with the modem like this?
Thanks,Terry C.

I updated the BIOS to the latest ASUS release, 008, and it seemed to resolve the problem.

Audigy 2 ZS Platinum and Stereo PCM

#Audigy 2 ZS Platinum and Stereo PCM? Hi,
Have an Audigy 2 ZS Platinum here and I'm having issues with having no audio when inputting Stereo PCM over Optical Toslink. I tried using both default and internal decoder, but no audio at all. It only works when using passthru/bypass mode. Tried a bunch of stereo inputs and had no audio at all. Is Stereo PCM not supported or what here? The test input streams were PCM two channel 48khz 6bit and 20bit. And Dolby Pro Logic is listed in the decoder tab with Auto, On, or Off. But maybe that isn't the same as Dolby Pro Logic II and that is why there is no audio. Only seems to work with Passthru mode only.
Message Edited by Seraphic on 04-7-2009 03:07 PMMessage Edited by Seraphic on 04-8-2009 0:44 PM

Hi, is anyone able to offe some help? Thanks

What are the Gold, Platinum and Silver certification ?

Hi All,
I was just curious to know if we have only Gold and Silver certification in Japan or also in other countries.
Is it the company that get's the title Gold, Platinum and Silver partner or is it the candidate that did pass the OCM?
What are the differences and how do oracle makes this ranking Gold, Platinum and Silver certification?
I've found that but it is in Japanese, so a bit difficult to read and understand. http://www.oracle.com/global/jp/education/certification/showcase/cultivate/tcs.html
Any Japanese could help please?
Or someone has any clue on that question.
thanks

Oracle Certifications are only designated by Silver, Gold & Platinum in Japan. Japan had their own Oracle Certification designations before the Oracle Certification Program was created in 1997. The Japan certification branding (silver, gold, platinum) was not changed in Japan since this branding is highly recognized in Japan.
Below is a mapping of how Japan's credentials map to the Oracle Certification Program's:
* Silver = Associte
* Gold = Professional
* Platinum = OCM
A person is recognized as as earning an Oracle Certification credential, not a company.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager

Advanced functions,UDF's and node function

Dear all,
Can you kindly let me know about Advanced functions,UDF's and node function.Differences and Uses.
Also Let me know about the advantages,Disadvantages of Graphical,XSLT,Java,ABAP and ABAP XSLT mappings.
Thanks,
Srini

Hi,
The term Mapping means:
1. The transformation process, and/or
2. The transformation rules.
Independently from XI, you can distinguish two different mappings
Structure mappings transform entire message structures.
Value mappings transform values within messages.
Mapping Programs to Map Messages :
Message Mapping
Designed by using the graphical mapping editor of Integration Builder
Result: Generated Java Code.
Imported Archives
Import externally defined mapping programs into repository
Java mapping:
Implemented by using a specific interface
XSLT mapping:
Runtime supports XSLT processor
Java methods can be called from within a Style Sheet
ABAP Mapping
You can execute mapping programs in a sequence
The exchange infrastructure supports three types of mappings:
Message mappings that can be designed using a graphical mapping editor in the Integration Builder. As a result, Java code is generated from the graphical representation that is compiled before it can be executed on the integration server.
You can implement your own Java mapping by implementing a specific interface of the mapping API.
You can implement an XSLT mapping
For the latter two, there is no tool support in XI. It is expected that they are developed using external development tools. To make them available for the integration server, they have to be imported into the integration repository as JAR
files before (JAR: Java Archives).
Developers can even decide to combine the different mapping technologies:
Message mappings, XSLT mappings and Java mappings can be combined in a sequence by means of an interface mapping.
XSLT mappings can use java functions
Message mappings support user-defined functions that can use imported java packages of the same namespace.
In SAP XI, there is 3 types of mappings. Namely
XSLT Mapping
Java Mapping
ABAP Mapping
Here is the details of each mapping.
XSLT Mappings (ABAP Engine)
Interface descriptions are in the form of XML documents. XSL Transformation (XSLT) is a member of the XML family of languages. It describes how an XML structure is transformed into another XML structure.
Customers can develop an XSLT mapping by using the Transformation Editor of the ABAP Workbench. Such XSLT mappings are executed at runtime on the ABAP Engine of the Integration Server.
To simplify matters, this section refers to XSLT mappings of the ABAP Engine as transformation programs to differentiate them from XSLT mappings from imported archives that are executed on the J2EE Engine.
Features
XPath and <xsl:include>
You can define mappings using XSLT together with XPath. XPath is also a specification of the XML family. Using XPath you can address any node in an XML document. XSLT implements XPath expressions to select substructures of an XML document. Using templates in XSLT you can define the mapping rules for the selected substructures.
You can use the XSLT tags <xsl:include> and <xsl:import> to include predefined templates for substructures in a complete mapping definition. In this way, you can reuse mappings for data types.
Java Mapping
You can implement mapping programs in Java. To process XML documents, use Java API for XML Processing (JAXP), for example. The JAXP supports the Document Object Model (DOM) and the Simple API for XML (SAX). This gives you great flexibility for mapping definitions with Java.
Implementation Considerations
Java mapping programs are not permitted to be stateful. You are therefore not permitted to perform actions such as writing data to a database table during a Java mapping. The Integration Server cannot track such side effects. Therefore, if an attempt is made to resend a message that has not been received by the receiver, the data may inadvertently be written to the database twice in a Java mapping.
If you use JRE classes in your Java mapping programs then the same program restrictions apply as for Enterprise Java Beans (EJBs). For a detailed description of these restrictions, see the relevant EJB specification. It is important that you also refer to the information under Scope of Functions in Runtime Environment (Java Mappings).
The runtime environment for Java mappings has an mapping API. To use Java mapping, you must define a Java class that implements the Java interface com.sap.aii.mapping.api.StreamTransformation. This interface has two methods:
● public void execute(java.io.InputStream in, java.io.OutputStream out)
At runtime, the Integration Engine calls this method to execute a mapping. This method contains an input stream for the source document and an output stream for the target document as parameters. These streams are usually XML documents. You can import the substructures to be converted from the input stream and output the converted target document in the output stream.
● public void setParameter(java.util.Map param)
The Integration Engine transfers parameters to the mapping program with this method. It evaluates these parameters at runtime in the method execute(). This enables you to control the process flow of the mapping.
The transferred object that implements the Java interface java.util.Map contains seven key/value pairs as parameters. These correspond to corresponding fields in the message header. Apart from the MAPPING_TRACE constant, the value objects are of type java.lang.String. The key objects are defined in the class com.sap.aii.mapping.api.StreamTransformationConstants
ABAP Mappings
ABAP mappings are mapping programs in ABAP objects that customers can implement using the ABAP Workbench.
Features
An ABAP mapping comprises an ABAP class that implements the interface IF_MAPPING in the package SAI_MAPPING.
Exception: CX_MAPPING_FAULT
Applications can decide themselves in the method EXECUTE how to import and change the source XML document. If you want to use the XSLT processor of SAP Web AS, you can use the ABAP Workbench to develop a stylesheet directly (see XSLT Mappings (ABAP Engine)) rather than using ABAP mappings.
Runtime Constants
In ABAP mapping you can read access message header fields. To do this, an object of type IF_MAPPING_PARAM is transferred to the EXECUTE method. The interface has constants for the names of the available parameters and a method GET, which returns the respective value for the parameter name. The constants are the same as in Java mappings, although the constant MAPPING_TRACE does not exist for ABAP mappings. Instead, the trace object is transferred directly using the parameter TRACE of the method IF_MAPPING~EXECUTE
Example: Accessing a Runtime Constant
Method IF_MAPPING~EXECUTE.
Get mapping constant SENDER_SERVICE
data: l_sender_service type string.
l_sender_service = param->get( IF_MAPPING_PARAM=>SENDER_SERVICE ).
ENDMETHOD.
These r excellent websites which contain PPT & PDF documents on mapping:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
Hope this will help you, and don't forget to close this thread.
Regards
Aashish Sinha
PS : reward points if helpful

[Tree] item and node order ! (Recursive Node)

I made a wd4a has organizatonal structure tree. but I have some problem with the org tree.
I want to have a tree(org structure) in item(person) and node(organization) order.
Root                                            Root
|- Person 1                                    |- Head Dept
|- Person 2                                    |        |-Person 3
|-Head Dept                        ->        |        |-Person 4
|       |- Person 3                             |-Sales
|       |- Person 4                             |- Person 1
|-Sales                                          |- Person 2
( to be displayed)                                 (current displayed)
Whiat's the problem?
Although the both of them have a same contents, I really want to display in person and org order .
Plz. help.

I solved this problem myself and it makes me very so tired.
I guess that Recursive node tree have some bugs.
If a node have one recursive node and one sub-node and some kinds of attributes,
we have to make a decision on how to display and sort them(sub-node and attributes)
There is a example below as I really want to sort them.
C_Drive Folder
- file 1
- file 2
- Folder 1
- file3
- Folder 1-1
- Folder 2
Context
    |-Folder Node
    |      |-File Node
    |      |       |-File Name attribute
    |      |-Folder Name attribute
    |      |-Folder_Content             -> Recursive Node
When you meet this situation,you must implement the context nodes and
the names of context node and recursive node must be in alphabet order you want to display.
I am sorry for my crumsy writting English.

SCOM 2012 R2 RU 2 Topology widgets Background image and Nod visualization is missing

After Updating RU 2 in System center OM 2012 R2 no background image and Nod visualization missing in Topology widgets ?
Santosh Dharamsale

You will need to Import the MP Microsoft.SystemCenter.Visualization.Library.mpb.
For more info., You can refer below link
http://thoughtsonopsmgr.blogspot.com/2014/04/update-rollup-2-for-scom-2012-r2.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

K8N platinum and firewall

I just bought K8N platinum and got some problems with the firewall, I cant choose any other profile, like custom, high, low and medium.
the problems is that when I tell it to change it starts and it stands: "Configuration settings are being applied" and there it stands forever (just tested, it stood like that for 6 houres before I shut it down) and under it stands :
Error in ProfileCustom1Base Set : Invalid selection. Please choose a valid selection.
Error in ProfileCustom2Base Set : Invalid selection. Please choose a valid selection.
is it any solution to this?
I have tried to update, reinstall drivers

Quote
Originally posted by 3cho
if you want to make a shortcut that opens it up in IE. Create a new shortcut and set the target as:
"C:\Program Files\Internet Explorer\IEXPLORE.EXE" http://127.0.0.1:3476/cgi-bin/ncgir.exe?menu/index.html
and set it to start in any valid directory (i use C:\Program Files\Internet Explorer).
You can even set the icon to the nVidia one and you won't know the difference.
I love the search feature on this forum, tis well good
anyhoo cheers 3cho, ur a diamond

Sun Java Application Server - Domain and Node agent stop automatically

Hi,
We have installed Sun Java Application server 8.1 in a local zone on Solaris 10. The installation was successful.
A default domain (domain1) was created. We have deployed a sample application too.
The problem is that the domain and node-agent stop automatically. And need to be restarted from asadmin start-domain command.
Not sure why this problem is occurring. One solution given in Sun Java System AS 8.1 EE Troubleshooting Guide was to add these 2 lines in the /etc/inittab file to restart the domain and node-agent whenever the system re-boots.
das:3:respawn:/opt/SUNWappserver/bin/asadmin start-domain user admin passwordfile /opt/SUNWappserver/password.txt domain1
das:3:respawn:/opt/SUNWappserver/bin/asadmin start-node-agent user admin passwordfile /opt/SUNWappserver/password.txt node-agent-name
Pls help me if I can change this inittab file from the local zone and if changing this file has any implications on the other zones on Solaris 10.
Else is there any other way to resolve this problem?
Any help would be highly appreciated.
Thankyou.

One thing not clear from the post was,
* when it is going down automatically.
* Are you facing the same problem even after starting through the asadmin
* If so, Post the server.log from "domains/logs" during the starup.
If you want to bring it up with system reboot, You need to have a startup script for that in init.d and have the links to rc2/3.d.

Displaying image and node name while dragging ...like Windows Explorer.

hi group,
i want to display the image and node name of the node while dragging in my tree.like windows Explorer.
Any body can help me regarding this.?pls
thank u...
Shalinipriya.

hi group,
Anybody knows regarding this "dragging nodename and image"?
pls let me know
thank u...
Shalinipriya.

X-Fi Platinum and mixed digital

Hello,
i have x-fi platinum and dtt 2500 speakers which are 5. dolby digital speakers while used through spdif out and 4 channels when used through analog outputs, in speakers panel i have 4/4. speakers configuration.
i have two problems:
. when i am using speakers with digitall output without dd or dts sound output is mixed exactly in two channel:
front left with rear left and front right with rear right
in my last music card audigy 2 zs i had only front channels in digital output in the same configuration!!
2.i want to decode Dolby Digital by external amplifier and DTS by X-fi.
in entertainment mode there are two different menus for each standard but it is not possible to change options like i want because switching something in anyone menu switches the same options in second menu
how can i pass this problems?

I know some Line 6/Variax's include a DI box with balanced XLR out... if yours does include this, just make sure its inabled - if it DOESNT include a DI pass, you may have to purchase one. This solved my problem (acoustic/electric guitars), which produced scratchy, dull output similar to yours.
I wouldnt spend too much on it though. Something like this would do. : http://www.americanmusical.com/item--i-BEH-GI00--s-di-box.html
Best luck.

How to create Import format for building version Hirerarchy and Node

Hi
i Want to know how to create Import format for building version Hirerarchy and Nodes.Can anyone show me with example or format for version Hierarchy with few nodes for the hierarchy
i Want to Build   this   1. Version1 (Version)
                                 2.Account (Hirerarchy)
                                 3. Balancesheet (Limb)
                                 4. Assets (Limb)
                                 5. Cash (Leaf)
Thanks,

Please follow the DRM User Guide,
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_user.pdf
Below is my preferred approach, by selecting only relation and Hierarchy sections,
The relation section contains the Node Name and Parent Name ( you can include any other properties, but as a best practice keep the Parent Node as the last column).
The Hierarchy ( Hier ) section contains the Hierarchy Name, Top Node and Hierarchy description
Follow the Import steps and provide a Name for the version.
++++++++++++++++++++++++++++++++
[relation]
AC_BalanceSheet AC_Account
AC_Asset AC_Account
AC_Cash AC_Account
[hier]
Account AC_Account AccountHier
++++++++++++++++++++++
Note: Please delete all the special characters (TAB) created at the end of [relation] and [hier] sections while you copy the content from an Excel sheet to a Notepad.

Field for counter and node in IA07 transaction

Hi,
In PLPO table when i give the task list type and group, I get multiple entries.How do we restrict the number of entries to the ones we need for our maintenance plan? Can it be done through counter and node? In that case where can we find them in IA07 transaction?
Thanks & Regards,
Jegashree

Hi experts,
Any suggestion on this?
Regards,
Jegashree

EWQLSO Platinum and Node

Similar Messages

Maybe you are looking for